sensor temperatura

0x01-temperatura/0x01-temperatura.ino

@@ -1,71 +1,76 @@
-int inData;
 
-char sensorValue = "10";
+#include <OneWire.h>
-const byte devID = 0x01;
+#include <DallasTemperature.h>
+
+// Pin donde se conecta el bus 1-Wire
+const int pinDatosDQ = 2;
+
+// Instancia a las clases OneWire y DallasTemperature
+OneWire oneWireObjeto(pinDatosDQ);
+DallasTemperature sensorDS18B20(&oneWireObjeto);
+
+
+// Dispositivo
+const int devID = 1;
+char devIDstr[5];
+int inQuery;
 
 
 
-char *senData[] {
-  "T",  // Tipo de sensor
-  "s", // Lectura del sensor
-  "C"
-
-};
 
+float getData() {
 
+  sensorDS18B20.requestTemperatures();
+  return (sensorDS18B20.getTempCByIndex(0));
+}
 
 
 void setup() {
-  Serial.begin(14400);
+  Serial.begin(9600);
+  sensorDS18B20.begin();
 
-}
 
 
 
+}
 void loop() {
+
+
+
+
+
+
   if ( Serial.available() > 0) {
-    inData = Serial.read();
+    inQuery = Serial.read();
-    switch (inData) {
+    if ( inQuery = devID) {
-      case devID:
-
-        Serial.write(devID);
-
-        for (int i = 0; i <= 3; i++) {
-          Serial.write(senData[i]);
-
-        }
-        Serial.write("99");
-
-        break;
-    }
-  }
-}
 
 
-/*if ( Serial.available() > 0) {
-  inData = Serial.read();
 
-  switch (inData) {
+
-    case devID:
+
-      Serial.write("0x01");
+
+
+      Serial.write(itoa(devID, devIDstr, 10));
       Serial.write(" ");
-      Serial.write("hum");
+      Serial.write("T");
+      //Serial.write(" ");
+
+      float lectura = getData();
+      char lecturaStr[8]; // Buffer big enough for 7-character float
+      dtostrf(lectura, 6, 2, lecturaStr); // Leave room for too large numbers!
+
+
+      Serial.write(lecturaStr);
       Serial.write(" ");
-      Serial.write("78");
+      Serial.write("C");
-      Serial.write(" ");
-      Serial.write("P");
       Serial.write(" ");
       Serial.write("99");
-      Serial.write(" ");
-      Serial.write("pre");
-      Serial.write(" ");
-      Serial.write("100");
-      Serial.write(" ");
-      Serial.write("Hpa");
-      Serial.write(" ");
-      Serial.write("98");
-      Serial.write(" ");
 
-      break;
+
+    }
+
   }
-  } */
+
+  delay(1500);
+
+}

0x01-temperatura/config.ino

@@ -0,0 +1 @@
+

0x02-turbidez/0x02-turbidez.ino

@@ -0,0 +1,30 @@
+int inData;
+const char* valueSensor;
+
+void setup() {
+  Serial.begin(9600);
+}
+
+
+ void loop() {
+
+  if ( Serial.available() > 0) {
+    inData = Serial.read();
+
+    switch (inData) {
+      case 2:
+        Serial.print(2);
+        Serial.print(" ");
+        Serial.print("hum");
+        Serial.print(" ");
+        Serial.print("78");
+        Serial.print(" ");
+        Serial.print("P");
+        Serial.print(" ");
+        Serial.print("99");
+        Serial.print(" ");
+         
+        break;
+    }
+  }
+}