agregar comando parado para correr qemu

fstab.ts

@@ -6,7 +6,10 @@ export class Fstab {
     this.alpine = alpine;
   }
 
-  private mounts: string[] = ["tmpfs /tmp tmpfs defaults 0 0"];
+  private mounts: string[] = [
+    "/current.squashfs  / squashfs  defaults  0 0",
+    "tmpfs /tmp tmpfs defaults 0 0",
+  ];
   async addMount(mount: string) {
     this.mounts.push(mount);
     await this.write();

index.ts

@@ -51,7 +51,7 @@ socat tcp-listen:80,reuseaddr,fork tcp:localhost:3050 &
 `,
     { uid: 0, gid: 0 }
   );
-  await alpine.fstab.addMount("/dev/sdb /persist ext4	defaults  0	0");
+  await alpine.fstab.addMount("/dev/sda /persist ext4	defaults  0	0");
   await timed(() => installFluentBit(alpine));
   const runit = await timed(() => Runit.setup(alpine));
   await timed(() => setupDhcpcd(alpine, runit));

initramfs-init

@@ -0,0 +1,293 @@
+#!/bin/sh
+
+# basado en https://gitlab.alpinelinux.org/alpine/mkinitfs/-/blob/6a09876be6297e601920382ca93555917e31f1f1/initramfs-init.in
+
+VERSION=420.69
+SINGLEMODE=no
+sysroot=/sysroot
+splashfile=/.splash.ctrl
+
+# some helpers
+ebegin() {
+	last_emsg="$*"
+	echo "$last_emsg..." > /dev/kmsg
+	[ "$KOPT_quiet" = yes ] && return 0
+	echo -n " * $last_emsg: "
+}
+eend() {
+	local msg
+	if [ "$1" = 0 ] || [ $# -lt 1 ] ; then
+		echo "$last_emsg: ok." > /dev/kmsg
+		[ "$KOPT_quiet" = yes ] && return 0
+		echo "ok."
+	else
+		shift
+		echo "$last_emsg: failed. $*" > /dev/kmsg
+		if [ "$KOPT_quiet" = "yes" ]; then
+			echo -n "$last_emsg "
+		fi
+		echo "failed. $*"
+		echo "initramfs emergency recovery shell launched. Type 'exit' to continue boot"
+		/bin/busybox sh
+	fi
+}
+
+# find mount dir for given device in an fstab
+# returns global MNTOPTS
+find_mnt() {
+	local search_dev="$1"
+	local fstab="$2"
+	case "$search_dev" in
+	UUID*|LABEL*) search_dev=$(findfs "$search_dev");;
+	esac
+	MNTOPTS=
+	[ -r "$fstab" ] || return 1
+	local search_maj_min=$(stat -L -c '%t,%T' $search_dev)
+	while read dev mnt fs MNTOPTS chk; do
+		case "$dev" in
+		UUID*|LABEL*) dev=$(findfs "$dev");;
+		esac
+		if [ -b "$dev" ]; then
+			local maj_min=$(stat -L -c '%t,%T' $dev)
+			if [ "$maj_min" = "$search_maj_min" ]; then
+				echo "$mnt"
+				return
+			fi
+		fi
+	done < $fstab
+	MNTOPTS=
+}
+
+# Do some tasks to make sure mounting the ZFS pool is A-OK
+prepare_zfs_root() {
+	local _root_vol=${KOPT_root#ZFS=}
+	local _root_pool=${_root_vol%%/*}
+
+	# Force import if this has been imported on a different system previously.
+	# Import normally otherwise
+	if [ "$KOPT_zfs_force" = 1 ]; then
+		zpool import -N -d /dev -f $_root_pool
+	else
+		zpool import -N -d /dev $_root_pool
+	fi
+
+	# Ask for encryption password
+	if [ $(zpool list -H -o feature@encryption $_root_pool) = "active" ]; then
+		local _encryption_root=$(zfs get -H -o value encryptionroot $_root_vol)
+		if [ "$_encryption_root" != "-" ]; then
+			eval zfs load-key $_encryption_root
+		fi
+	fi
+}
+
+/bin/busybox mkdir -p /usr/bin /usr/sbin /proc /sys /dev $sysroot /persist \
+	/media/cdrom /media/usb /tmp /run/cryptsetup
+
+# Spread out busybox symlinks and make them available without full path
+/bin/busybox --install -s
+export PATH=/usr/bin:/bin:/usr/sbin:/sbin
+
+# Make sure /dev/null is a device node. If /dev/null does not exist yet, the command
+# mounting the devtmpfs will create it implicitly as an file with the "2>" redirection.
+# The -c check is required to deal with initramfs with pre-seeded device nodes without
+# error message.
+[ -c /dev/null ] || mknod -m 666 /dev/null c 1 3
+
+mount -t sysfs -o noexec,nosuid,nodev sysfs /sys
+mount -t devtmpfs -o exec,nosuid,mode=0755,size=2M devtmpfs /dev 2>/dev/null \
+	|| mount -t tmpfs -o exec,nosuid,mode=0755,size=2M tmpfs /dev
+
+# Make sure /dev/kmsg is a device node. Writing to /dev/kmsg allows the use of the
+# earlyprintk kernel option to monitor early init progress. As above, the -c check
+# prevents an error if the device node has already been seeded.
+[ -c /dev/kmsg ] || mknod -m 660 /dev/kmsg c 1 11
+
+mount -t proc -o noexec,nosuid,nodev proc /proc
+# pty device nodes (later system will need it)
+[ -c /dev/ptmx ] || mknod -m 666 /dev/ptmx c 5 2
+[ -d /dev/pts ] || mkdir -m 755 /dev/pts
+mount -t devpts -o gid=5,mode=0620,noexec,nosuid devpts /dev/pts
+
+# shared memory area (later system will need it)
+[ -d /dev/shm ] || mkdir /dev/shm
+mount -t tmpfs -o nodev,nosuid,noexec shm /dev/shm
+
+
+# read the kernel options. we need surve things like:
+#  acpi_osi="!Windows 2006" xen-pciback.hide=(01:00.0)
+set -- $(cat /proc/cmdline)
+
+myopts="alpine_dev autodetect autoraid cryptroot cryptdm cryptheader cryptoffset
+	cryptdiscards cryptkey debug_init dma init init_args modules
+	quiet root_size root usbdelay alpine_start splash
+	blacklist overlaytmpfs overlaytmpfsflags rootfstype rootflags nbd resume
+	ssh_key BOOTIF"
+
+for opt; do
+	case "$opt" in
+	s|single|1)
+		SINGLEMODE=yes
+		continue
+		;;
+	console=*)
+		opt="${opt#*=}"
+		KOPT_consoles="${opt%%,*} $KOPT_consoles"
+		switch_root_opts="-c /dev/${opt%%,*}"
+		continue
+		;;
+	esac
+
+	for i in $myopts; do
+		case "$opt" in
+		$i=*)	eval "KOPT_${i}"='${opt#*=}';;
+		$i)	eval "KOPT_${i}=yes";;
+		no$i)	eval "KOPT_${i}=no";;
+		esac
+	done
+done
+
+echo "Nulo Init $VERSION" > /dev/kmsg
+[ "$KOPT_quiet" = yes ] || echo "Nulo Init $VERSION"
+
+# enable debugging if requested
+[ -n "$KOPT_debug_init" ] && set -x
+
+# set default values
+: ${KOPT_init:=/sbin/init}
+
+# pick first keymap if found
+for map in /etc/keymap/*; do
+	if [ -f "$map" ]; then
+		ebegin "Setting keymap ${map##*/}"
+		zcat "$map" | loadkmap
+		eend
+		break
+	fi
+done
+
+# hide kernel messages
+[ "$KOPT_quiet" = yes ] && dmesg -n 1
+
+# optional blacklist
+for i in ${KOPT_blacklist//,/ }; do
+	echo "blacklist $i" >> /etc/modprobe.d/boot-opt-blacklist.conf
+done
+
+# make sure we load zfs module if root=ZFS=...
+rootfstype=${KOPT_rootfstype}
+if [ -z "$rootfstype" ]; then
+	case "$KOPT_root" in
+	ZFS=*) rootfstype=zfs ;;
+	esac
+fi
+
+# load available drivers to get access to modloop media
+ebegin "Loading boot drivers"
+
+modprobe -a $(echo "$KOPT_modules $rootfstype" | tr ',' ' ' ) loop squashfs simpledrm 2> /dev/null
+if [ -f /etc/modules ] ; then
+	sed 's/\#.*//g' < /etc/modules |
+	while read module args; do
+		modprobe -q $module $args
+	done
+fi
+eend 0
+
+if [ -n "$KOPT_cryptroot" ]; then
+	cryptopts="-c ${KOPT_cryptroot}"
+	if [ "$KOPT_cryptdiscards" = "yes" ]; then
+		cryptopts="$cryptopts -D"
+	fi
+	if [ -n "$KOPT_cryptdm" ]; then
+		cryptopts="$cryptopts -m ${KOPT_cryptdm}"
+	fi
+	if [ -n "$KOPT_cryptheader" ]; then
+		cryptopts="$cryptopts -H ${KOPT_cryptheader}"
+	fi
+	if [ -n "$KOPT_cryptoffset" ]; then
+		cryptopts="$cryptopts -o ${KOPT_cryptoffset}"
+	fi
+	if [ "$KOPT_cryptkey" = "yes" ]; then
+		cryptopts="$cryptopts -k /crypto_keyfile.bin"
+	elif [ -n "$KOPT_cryptkey" ]; then
+		cryptopts="$cryptopts -k ${KOPT_cryptkey}"
+	fi
+fi
+
+# zpool reports /dev/zfs missing if it can't read /etc/mtab
+ln -s /proc/mounts /etc/mtab
+
+# check if root=... was set
+if [ -n "$KOPT_root" ]; then
+	# run nlplug-findfs before SINGLEMODE so we load keyboard drivers
+	ebegin "Mounting root"
+	nlplug-findfs $cryptopts -p /sbin/mdev ${KOPT_debug_init:+-d} \
+		$KOPT_root
+
+	if [ "$SINGLEMODE" = "yes" ]; then
+		echo "Entering single mode. Type 'exit' to continue booting."
+		sh
+	fi
+
+	if echo "$KOPT_modules $rootfstype" | grep -qw btrfs; then
+		/sbin/btrfs device scan >/dev/null || \
+			echo "Failed to scan devices for btrfs filesystem."
+	fi
+
+	if [ -n "$KOPT_resume" ]; then
+		echo "Resume from disk"
+		if [ -e /sys/power/resume ]; then
+			case "$KOPT_resume" in
+			UUID*|LABEL*) resume_dev=$(findfs "$KOPT_resume");;
+			*) resume_dev="$KOPT_resume";;
+			esac
+			printf "%d:%d" $(stat -Lc "0x%t 0x%T" "$resume_dev") >/sys/power/resume
+		else
+			echo "resume: no hibernation support found"
+		fi
+	fi
+
+	# TODO: implementar esto que podría ser particularmente útil
+	# if [ "$KOPT_overlaytmpfs" = "yes" ]; then
+	# 	# Create mountpoints
+	# 	mkdir -p /media/root-ro /media/root-rw $sysroot/media/root-ro \
+	# 		$sysroot/media/root-rw
+	# 	# Mount read-only underlying rootfs
+	# 	rootflags="${KOPT_rootflags:+$KOPT_rootflags,}ro"
+	# 	mount ${KOPT_rootfstype:+-t $KOPT_rootfstype} -o $rootflags \
+	# 		$KOPT_root /media/root-ro
+	# 	# Mount writable overlay tmpfs
+	# 	overlaytmpfsflags="mode=0755,${KOPT_overlaytmpfsflags:+$KOPT_overlaytmpfsflags,}rw"
+	# 	mount -t tmpfs -o $overlaytmpfsflags root-tmpfs /media/root-rw
+	# 	# Create additional mountpoints and do the overlay mount
+	# 	mkdir -p /media/root-rw/work /media/root-rw/root
+	# 	mount -t overlay -o \
+	# 		lowerdir=/media/root-ro,upperdir=/media/root-rw/root,workdir=/media/root-rw/work \
+	# 		overlayfs $sysroot
+	# else
+	if [ "$rootfstype" = "zfs" ]; then
+		prepare_zfs_root
+	fi
+	
+	echo "nulo => Montando /persist"
+	mount ${rootfstype:+-t} ${rootfstype} \
+		-o ${KOPT_rootflags:-rw} \
+		${KOPT_root#ZFS=} /persist \
+		|| eend "$?"
+	
+	echo "nulo => Montando current.squashfs en /sysroot"
+	mount "/persist/current.squashfs" "$sysroot"
+	# fi
+
+	eend $?
+	cat /proc/mounts | while read DEV DIR TYPE OPTS ; do
+		if [ "$DIR" != "/" -a "$DIR" != "$sysroot" -a -d "$DIR" ]; then
+			mkdir -p $sysroot/$DIR
+			mount -o move $DIR $sysroot/$DIR
+		fi
+	done
+	sync
+	exec /bin/busybox switch_root $switch_root_opts $sysroot "$KOPT_init" $KOPT_init_args
+	echo "initramfs emergency recovery shell launched"
+	exec /bin/busybox sh
+fi

kernel.ts

@@ -81,6 +81,11 @@ disable_trigger=yes`
       "utf-8"
     )
   ).trim();
+  // TODO: poner en un mejor lugar
+  await alpine.writeExecutable(
+    "/etc/mkinitfs/init",
+    await readFile("./initramfs-init", "utf-8")
+  );
   // run mkinitfs manually as trigger was diabled
   await execFile("chroot", [
     alpine.dir,
@@ -89,6 +94,8 @@ disable_trigger=yes`
     "zstd",
     "-o",
     `/boot/initramfs-${kind}`,
+    "-i",
+    "/etc/mkinitfs/init",
     kernelRelease,
   ]);
 

package.json

@@ -8,7 +8,8 @@
     "build": "esbuild --log-level=warning --target=node18 --platform=node --sourcemap --outdir=build-javascript --format=esm --bundle index.ts",
     "build:qemu": "esbuild --log-level=warning --target=node18 --platform=node --sourcemap --outdir=build-javascript --format=esm --bundle qemu.ts",
     "build-image": "./npmrun build && doas node --enable-source-maps build-javascript/index.js",
-    "run": "./npmrun build-image && ./npmrun build:qemu && node --enable-source-maps build-javascript/qemu.js",
+    "run": "./npmrun build-image && ./npmrun build:qemu && ./npmrun run:qemu",
+    "run:qemu": "node --enable-source-maps build-javascript/qemu.js",
     "//test": "./npmrun build && node --enable-source-maps build-javascript/**/*.test.js",
     "tsc:check": "tsc --noEmit"
   },

qemu.ts

@@ -1,6 +1,6 @@
-import { mkdtemp, rm } from "node:fs/promises";
+import { cp, mkdir, mkdtemp, rm } from "node:fs/promises";
 import { tmpdir } from "node:os";
-import path from "node:path";
+import path, { join } from "node:path";
 import { canAccess, execFile } from "./helpers/better-api.js";
 import { sudoChownToRunningUser } from "./helpers/sudo.js";
 
@@ -23,10 +23,24 @@ export async function runQemu(
       await execFile("fallocate", ["--length", "1G", disk]);
       await execFile("mkfs.ext4", ["-F", disk]);
     }
+    {
+      const mountpoint = join(tmp, "persist-mount");
+      await mkdir(mountpoint);
+      await execFile("sudo", ["mount", disk, mountpoint]);
+      try {
+        await execFile("sudo", [
+          "cp",
+          squashfs,
+          join(mountpoint, "current.squashfs"),
+        ]);
+      } finally {
+        await execFile("sudo", ["umount", mountpoint]);
+      }
+    }
 
     let kernelAppend = [
       "root=/dev/sda",
-      "rootfstype=squashfs",
+      "rootfstype=ext4",
       "modules=ext4",
       "quiet",
       "init=/sbin/runit-init",
@@ -44,8 +58,8 @@ export async function runQemu(
       "-enable-kvm",
       "-m",
       "2048",
-      "-drive",
+      // "-drive",
-      `file=${squashfs},media=disk,format=raw`,
+      // `file=${squashfs},media=disk,format=raw`,
       "-drive",
       `file=${disk},media=disk,format=raw`,
       "-net",