diff --git a/docs/content/doc/advanced/logging-documentation.en-us.md b/docs/content/doc/advanced/logging-documentation.en-us.md index 4e8cbb3282..145c8c320c 100644 --- a/docs/content/doc/advanced/logging-documentation.en-us.md +++ b/docs/content/doc/advanced/logging-documentation.en-us.md @@ -15,6 +15,14 @@ menu: # Logging Configuration +The logging configuration of Gitea mainly consists of 3 types of components: + +- The `[log]` section for general configuration +- `[log.]` sections for the configuration of different log outputs +- `[log..]` sections for output specific configuration of a log group + +As mentioned below, there is a fully functional log output by default, so it is not necessary to define one. + **Table of Contents** {{< toc >}} @@ -23,6 +31,166 @@ menu: To collect logs for help and issue report, see [Support Options]({{< relref "doc/help/seek-help.en-us.md" >}}). +## The `[log]` section + +Configuration of logging facilities in Gitea happen in the `[log]` section and it's subsections. + +In the top level `[log]` section the following configurations can be placed: + +- `ROOT_PATH`: (Default: **%(GITEA_WORK_DIR)/log**): Base path for log files +- `MODE`: (Default: **console**) List of log outputs to use for the Default logger. +- `ROUTER`: (Default: **console**): List of log outputs to use for the Router logger. +- `ACCESS`: List of log outputs to use for the Access logger. +- `XORM`: (Default: **,**) List of log outputs to use for the XORM logger. +- `ENABLE_ACCESS_LOG`: (Default: **false**): whether the Access logger is allowed to emit logs +- `ENABLE_XORM_LOG`: (Default: **true**): whether the XORM logger is allowed to emit logs + +For details on the loggers check the "Log Groups" section. +Important: log outputs won't be used if you don't enable them for the desired loggers in the corresponding list value. + +Lists are specified as comma separated values. This format also works in subsection. + +This section may be used for defining default values for subsections. +Examples: + +- `LEVEL`: (Default: **Info**) Least severe log events to persist. Case insensitive. The full list of levels as of v1.17.3 can be read [here](https://github.com/go-gitea/gitea/blob/v1.17.3/custom/conf/app.example.ini#L507). +- `STACKTRACE_LEVEL`: (Default: **None**) For this and more severe events the stacktrace will be printed upon getting logged. + +Some values are not inherited by subsections. For details see the "Non-inherited default values" section. + +## Log outputs + +Log outputs are the targets to which log messages will be sent. +The content and the format of the log messages to be saved can be configured in these. + +Log outputs are also called subloggers. + +Gitea provides 4 possible log outputs: + +- `console` - Log to `os.Stdout` or `os.Stderr` +- `file` - Log to a file +- `conn` - Log to a socket (network or unix) +- `smtp` - Log via email + +By default, Gitea has a `console` output configured, which is used by the loggers as seen in the section "The log section" above. + +### Common configuration + +Certain configuration is common to all modes of log output: + +- `MODE` is the mode of the log output. It will default to the sublogger + name, thus `[log.console.router]` will default to `MODE = console`. + For mode specific confgurations read further. +- `LEVEL` is the lowest level that this output will log. This value + is inherited from `[log]` and in the case of the non-default loggers + from `[log.sublogger]`. +- `STACKTRACE_LEVEL` is the lowest level that this output will print + a stacktrace. This value is inherited. +- `COLORIZE` will default to `true` for `console` as + described, otherwise it will default to `false`. + +### Non-inherited default values + +There are several values which are not inherited as described above but +rather default to those specific to type of logger, these are: +`EXPRESSION`, `FLAGS`, `PREFIX` and `FILE_NAME`. + +#### `EXPRESSION` + +`EXPRESSION` represents a regular expression that log events must match to be logged by the sublogger. Either the log message, (with colors removed), must match or the `longfilename:linenumber:functionname` must match. NB: the whole message or string doesn't need to completely match. + +Please note this expression will be run in the sublogger's goroutine +not the logging event subroutine. Therefore it can be complicated. + +#### `FLAGS` + +`FLAGS` represents the preceding logging context information that is +printed before each message. It is a comma-separated string set. The order of values does not matter. + +Possible values are: + +- `none` or `,` - No flags. +- `date` - the date in the local time zone: `2009/01/23`. +- `time` - the time in the local time zone: `01:23:23`. +- `microseconds` - microsecond resolution: `01:23:23.123123`. Assumes + time. +- `longfile` - full file name and line number: `/a/b/c/d.go:23`. +- `shortfile` - final file name element and line number: `d.go:23`. +- `funcname` - function name of the caller: `runtime.Caller()`. +- `shortfuncname` - last part of the function name. Overrides + `funcname`. +- `utc` - if date or time is set, use UTC rather than the local time + zone. +- `levelinitial` - Initial character of the provided level in brackets eg. `[I]` for info. +- `level` - Provided level in brackets `[INFO]` +- `medfile` - Last 20 characters of the filename - equivalent to + `shortfile,longfile`. +- `stdflags` - Equivalent to `date,time,medfile,shortfuncname,levelinitial` + +### Console mode + +In this mode the logger will forward log messages to the stdout and +stderr streams attached to the Gitea process. + +For loggers in console mode, `COLORIZE` will default to `true` if not +on windows, or the windows terminal can be set into ANSI mode or is a +cygwin or Msys pipe. + +Settings: + +- `STDERR`: **false**: Whether the logger should print to `stderr` instead of `stdout`. + +### File mode + +In this mode the logger will save log messages to a file. + +Settings: + +- `FILE_NAME`: The file to write the log events to. For details see below. +- `MAX_SIZE_SHIFT`: **28**: Maximum size shift of a single file. 28 represents 256Mb. For details see below. +- `LOG_ROTATE` **true**: Whether to rotate the log files. TODO: if false, will it delete instead on daily rotate, or do nothing?. +- `DAILY_ROTATE`: **true**: Whether to rotate logs daily. +- `MAX_DAYS`: **7**: Delete rotated log files after this number of days. +- `COMPRESS`: **true**: Whether to compress old log files by default with gzip. +- `COMPRESSION_LEVEL`: **-1**: Compression level. For details see below. + +The default value of `FILE_NAME` depends on the respective logger facility. +If unset, their own default will be used. +If set it will be relative to the provided `ROOT_PATH` in the master `[log]` section. + +`MAX_SIZE_SHIFT` defines the maximum size of a file by left shifting 1 the given number of times (`1 << x`). +The exact behavior at the time of v1.17.3 can be seen [here](https://github.com/go-gitea/gitea/blob/v1.17.3/modules/setting/log.go#L185). + +The useful values of `COMPRESSION_LEVEL` are from 1 to (and including) 9, where higher numbers mean better compression. +Beware that better compression might come with higher resource usage. +Must be preceded with a `-` sign. + +### Conn mode + +In this mode the logger will send log messages over a network socket. + +Settings: + +- `ADDR`: **:7020**: Sets the address to connect to. +- `PROTOCOL`: **tcp**: Set the protocol, either "tcp", "unix" or "udp". +- `RECONNECT`: **false**: Try to reconnect when connection is lost. +- `RECONNECT_ON_MSG`: **false**: Reconnect host for every single message. + +### SMTP mode + +In this mode the logger will send log messages in email. + +It is not recommended to use this logger to send general logging +messages. However, you could perhaps set this logger to work on `FATAL` messages only. + +Settings: + +- `HOST`: **127.0.0.1:25**: The SMTP host to connect to. +- `USER`: User email address to send from. +- `PASSWD`: Password for the smtp server. +- `RECEIVERS`: Email addresses to send to. +- `SUBJECT`: **Diagnostic message from Gitea**. The content of the email's subject field. + ## Log Groups The fundamental thing to be aware of in Gitea is that there are several @@ -172,106 +340,6 @@ which will not be inherited from the `[log]` or relevant - `EXPRESSION` will default to `""` - `PREFIX` will default to `""` -## Log outputs - -Gitea provides 4 possible log outputs: - -- `console` - Log to `os.Stdout` or `os.Stderr` -- `file` - Log to a file -- `conn` - Log to a keep-alive TCP connection -- `smtp` - Log via email - -Certain configuration is common to all modes of log output: - -- `LEVEL` is the lowest level that this output will log. This value - is inherited from `[log]` and in the case of the non-default loggers - from `[log.sublogger]`. -- `STACKTRACE_LEVEL` is the lowest level that this output will print - a stacktrace. This value is inherited. -- `MODE` is the mode of the log output. It will default to the sublogger - name. Thus `[log.console.router]` will default to `MODE = console`. -- `COLORIZE` will default to `true` for `console` as - described, otherwise it will default to `false`. - -### Non-inherited default values - -There are several values which are not inherited as described above but -rather default to those specific to type of logger, these are: -`EXPRESSION`, `FLAGS`, `PREFIX` and `FILE_NAME`. - -#### `EXPRESSION` - -`EXPRESSION` represents a regular expression that log events must match to be logged by the sublogger. Either the log message, (with colors removed), must match or the `longfilename:linenumber:functionname` must match. NB: the whole message or string doesn't need to completely match. - -Please note this expression will be run in the sublogger's goroutine -not the logging event subroutine. Therefore it can be complicated. - -#### `FLAGS` - -`FLAGS` represents the preceding logging context information that is -printed before each message. It is a comma-separated string set. The order of values does not matter. - -Possible values are: - -- `none` or `,` - No flags. -- `date` - the date in the local time zone: `2009/01/23`. -- `time` - the time in the local time zone: `01:23:23`. -- `microseconds` - microsecond resolution: `01:23:23.123123`. Assumes - time. -- `longfile` - full file name and line number: `/a/b/c/d.go:23`. -- `shortfile` - final file name element and line number: `d.go:23`. -- `funcname` - function name of the caller: `runtime.Caller()`. -- `shortfuncname` - last part of the function name. Overrides - `funcname`. -- `utc` - if date or time is set, use UTC rather than the local time - zone. -- `levelinitial` - Initial character of the provided level in brackets eg. `[I]` for info. -- `level` - Provided level in brackets `[INFO]` -- `medfile` - Last 20 characters of the filename - equivalent to - `shortfile,longfile`. -- `stdflags` - Equivalent to `date,time,medfile,shortfuncname,levelinitial` - -### Console mode - -For loggers in console mode, `COLORIZE` will default to `true` if not -on windows, or the windows terminal can be set into ANSI mode or is a -cygwin or Msys pipe. - -If `STDERR` is set to `true` the logger will use `os.Stderr` instead of -`os.Stdout`. - -### File mode - -The `FILE_NAME` defaults as described above. If set it will be relative -to the provided `ROOT_PATH` in the master `[log]` section. - -Other values: - -- `LOG_ROTATE`: **true**: Rotate the log files. -- `MAX_SIZE_SHIFT`: **28**: Maximum size shift of a single file, 28 represents 256Mb. -- `DAILY_ROTATE`: **true**: Rotate logs daily. -- `MAX_DAYS`: **7**: Delete the log file after n days -- `COMPRESS`: **true**: Compress old log files by default with gzip -- `COMPRESSION_LEVEL`: **-1**: Compression level - -### Conn mode - -- `RECONNECT_ON_MSG`: **false**: Reconnect host for every single message. -- `RECONNECT`: **false**: Try to reconnect when connection is lost. -- `PROTOCOL`: **tcp**: Set the protocol, either "tcp", "unix" or "udp". -- `ADDR`: **:7020**: Sets the address to connect to. - -### SMTP mode - -It is not recommended to use this logger to send general logging -messages. However, you could perhaps set this logger to work on `FATAL`. - -- `USER`: User email address to send from. -- `PASSWD`: Password for the smtp server. -- `HOST`: **127.0.0.1:25**: The SMTP host to connect to. -- `RECEIVERS`: Email addresses to send to. -- `SUBJECT`: **Diagnostic message from Gitea** - ## Debugging problems When submitting logs in Gitea issues it is often helpful to submit