Nulo/qmk_firmware
1
0
Fork 0
Code Releases Activity
qmk_firmware/keyboards/gh60/satan/readme.md

36 lines
1.4 KiB
Markdown
Raw Permalink Normal View History

[Keyboard] GH60 Satan improvements (#5264) * GH60 Satan improvements * Link no worky * Accidentally a h * Use MOD_MASK_SHIFT from core * Remove nonexistent layouts from here
2019-02-28 20:06:26 +00:00
# Satan GH60
remove .hex, .PNG, .jpg
2017-06-12 02:16:42 +00:00
[Keyboard] GH60 Satan improvements (#5264) * GH60 Satan improvements * Link no worky * Accidentally a h * Use MOD_MASK_SHIFT from core * Remove nonexistent layouts from here
2019-02-28 20:06:26 +00:00
A clone of the GH60 60% keyboard, with full backlighting support.
Make the bulk of our keyboards match the readme.md standard
2017-08-16 22:08:16 +00:00
Satan refactor and Configurator support (#3305) * Matrix refactor * Keymap refactor * Configurator support * Readme cleanup
2018-07-05 01:02:01 +00:00
Keyboard Maintainer: QMK Community
Hardware Supported: Satan GH60 PCB
[Keyboard] GH60 Satan improvements (#5264) * GH60 Satan improvements * Link no worky * Accidentally a h * Use MOD_MASK_SHIFT from core * Remove nonexistent layouts from here
2019-02-28 20:06:26 +00:00
Hardware Availability: https://www.1upkeyboards.com/shop/controllers/gh60-satan-pcb/
Make the bulk of our keyboards match the readme.md standard
2017-08-16 22:08:16 +00:00
Make example for this keyboard (after setting up your build environment):
GH60 Refactor: Move Satan into GH60 directory (#6485) * Move Satan into the GH60 directory to avoid the confusion of what PCB people have * set bootmagic to lite * rename gh60 file to revc
2019-08-05 06:06:33 +00:00
make gh60/satan:default
**Note:** This GH60 Satan firmware will not be compatible with the GH60 Rev C PCB. Conversely, the GH60 Rev C firmware will not be compatible with this PCB. Please ensure you have the correct firmware/pcb combination before flashing.
Make the bulk of our keyboards match the readme.md standard
2017-08-16 22:08:16 +00:00
[Keyboard] GH60 Satan improvements (#5264) * GH60 Satan improvements * Link no worky * Accidentally a h * Use MOD_MASK_SHIFT from core * Remove nonexistent layouts from here
2019-02-28 20:06:26 +00:00
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## RGB Underglow (WS2812B LED Strip)
This board also supports underglow with a slight mod.
Connect the DIN pad of the LED strip to PE2 on the ATmega32U4, like so:
![controller](https://i.imgur.com/9vyRBoT.jpg)
Then connect VCC and GND to pins 1 and 6 at the bottom of the PCB:
![power](https://i.imgur.com/pHMZHLP.jpg)
## ISP Header
If you want to flash another bootloader (such as QMK-DFU), or can't get into the bootloader in the first place, the row of pins at the bottom can be used to ISP flash the board:
| 1 | 2 | 3 | 4 | 5 | 6 | 7 |
|---|----|---|----|-----|---|----|
|VCC|MISO|SCK|MOSI|RESET|GND|*NC*|
Copy permalink