qmk_firmware/keyboards/gon/nerdtkl/readme.md

# GON NerD TKL

A Korean Custom TKL.

* Keyboard Maintainer: QMK Community
* Hardware Supported: GON NerD TKL PCB
* Hardware Availability: [gonskeyboardworks.com](http://www.gonskeyboardworks.com/pcbs-and-controllers/60-nerd-tkl-ver20-pcb.html)

Make example for this keyboard (after setting up your build environment):

    make gon/nerdtkl:default

See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

## Changing Bootloader

It's not possible to simply flash this firmware on the GON NerD keyboard as the original bootloader does not support DFU connections.

It is possible to change the bootloader of the GON NerD with an ISP programmer. A guide on how to change the bootloader on your GON NerD can be found here:
[Converting NerD60 to TMK](https://deskthority.net/wiki/Converting_NerD60_to_TMK). After changing the bootloader you can flash your QMK keymap onto the keyboard.

_After changing the bootloader on your GON NerD PCB you will not be able to go back to the original firmware and the official configuration software will
not work anymore. You will lose your warranty and official support from GON!_

## Reset button

To run the `make dfu` command to flash keymaps onto the board, you need to put the board into DFU mode. As the GON NerD PCBs do not have a reset button on the board to put it into DFU mode, be sure to include a `RESET` button on your keymap. Otherwise you'll have to unscrew your keyboard from the case and short the GND and RST pins.
2020 February 29 Breaking Changes Update (#8064) 2020-02-29 20:00:00 +00:00			`# GON NerD TKL`
Make the bulk of our keyboards match the readme.md standard 2017-08-16 22:08:16 +00:00
			`A Korean Custom TKL.`

2020 February 29 Breaking Changes Update (#8064) 2020-02-29 20:00:00 +00:00			`* Keyboard Maintainer: QMK Community`
			`* Hardware Supported: GON NerD TKL PCB`
			`* Hardware Availability: [gonskeyboardworks.com](http://www.gonskeyboardworks.com/pcbs-and-controllers/60-nerd-tkl-ver20-pcb.html)`
Make the bulk of our keyboards match the readme.md standard 2017-08-16 22:08:16 +00:00
			`Make example for this keyboard (after setting up your build environment):`

2020 February 29 Breaking Changes Update (#8064) 2020-02-29 20:00:00 +00:00			`make gon/nerdtkl:default`
Make the bulk of our keyboards match the readme.md standard 2017-08-16 22:08:16 +00:00
2020 February 29 Breaking Changes Update (#8064) 2020-02-29 20:00:00 +00:00			`See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).`
add GON NerD 2017-02-11 15:46:13 +00:00
			`## Changing Bootloader`

			`It's not possible to simply flash this firmware on the GON NerD keyboard as the original bootloader does not support DFU connections.`

			`It is possible to change the bootloader of the GON NerD with an ISP programmer. A guide on how to change the bootloader on your GON NerD can be found here:`
			`[Converting NerD60 to TMK](https://deskthority.net/wiki/Converting_NerD60_to_TMK). After changing the bootloader you can flash your QMK keymap onto the keyboard.`

			`_After changing the bootloader on your GON NerD PCB you will not be able to go back to the original firmware and the official configuration software will`
			`not work anymore. You will lose your warranty and official support from GON!_`

adds documentation for reset button and adds one to the default keymap 2017-02-13 08:00:25 +00:00			`## Reset button`

			To run the `make dfu` command to flash keymaps onto the board, you need to put the board into DFU mode. As the GON NerD PCBs do not have a reset button on the board to put it into DFU mode, be sure to include a `RESET` button on your keymap. Otherwise you'll have to unscrew your keyboard from the case and short the GND and RST pins.