1
0
Fork 0
qmk_firmware/keyboards/helix/rev2/keymaps/default/readme_jp.md

137 lines
5 KiB
Markdown
Raw Permalink Normal View History

# The Default Helix Layout
## 配列
### Qwerty配列
```
,-----------------------------------------. ,-----------------------------------------.
| ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Del |
|------+------+------+------+------+------| |------+------+------+------+------+------|
| Tab | Q | W | E | R | T | | Y | U | I | O | P | Bksp |
|------+------+------+------+------+------| |------+------+------+------+------+------|
| Ctrl | A | S | D | F | G | | H | J | K | L | ; | ' |
|------+------+------+------+------+------+------+------+------+------+------+------+------+------|
| Shift| Z | X | C | V | B | [ | ] | N | M | , | . | / |Enter |
|------+------+------+------+------+------+------+------+------+------+------+------+------+------|
|Adjust| Esc | Alt | GUI | EISU |Lower |Space |Space |Raise | KANA | Left | Down | Up |Right |
`-------------------------------------------------------------------------------------------------'
```
他の配列(Colemak,Dvorak)は、[readme.md](readme.md) を参照
## カスタマイズ
Helix キーボードを4行版として製作したり、オプションの OLED をつけたり、
RGB バックライトまたは、RGB Underglow をつけた場合は、
`qmk_firmware/keyboards/helix/rev2/keymaps/default/rules.mk` の以下の部分を編集して機能を有効化してください。
```
[Keyboard] Cleanup helix rules options (#6952) * add temporary test shell-spript * Use LINK_TIME_OPTIMIZATION_ENABLE instead of Link_Time_Optimization No change in build result. * Helix config.h use '#pragma once' No change in build result. * Helix helix.h,rev?/rev?.h,pico/pico.h use '#pragma once' No change in build result. * Use drivers/avr/pro_micro.h instead of keyboards/helix/pro_micro.h No change in build result. * remove keyboards/helix/{rev2|pico}/serial_config.h No change in build result. * 'HELIX_ROWS' macro is now referenced only in rev1/config.h and rev2/config.h. No change in build result. * The contents of helix/rules.mk were distributed to subdirectories. This is a preparation to create a new subdirectory for helix code using split_common. No change in build result. remove 'USE_I2C = yes', 'SUBPROJECT_rev1 = no' from keyboards/helix/rules.mk. follow code move from keyboards/helix/rules.mk to keyboards/helix/{rev1,rev2,pico}/rules.mk. ---- SRC += i2c.c SRC += serial.c SRC += ssd1306.c CUSTOM_MATRIX = yes --- * helix/{i2c.[ch], serial.[ch], ssd1306.[ch]} move into helix/local_drivers/ No change in build result. * Simplified 'helix/pico/keymap/*/rules.mk' using KEYBOARD_LOCAL_FEATURES_MK. No change in build result. * add keyboards/helix/pico/local_features.mk * add 'KEYBOARD_LOCAL_FEATURES_MK := $(dir $(lastword $(MAKEFILE_LIST)))local_features.mk' into keyboards/helix/pico/rules.mk * remove HELIX_CUSTOMISE_MSG from keyboards/helix/pico/keymaps/*/rules.mk * remove HELIX= process from keyboards/helix/pico/keymaps/*/rules.mk * remove convert code(helix to standaerd) from keyboards/helix/pico/keymaps/*/rules.mk * add 'include $(strip $(KEYBOARD_LOCAL_FEATURES_MK))' into keyboards/helix/pico/keymaps/*/rules.mk * Simplified 'helix/rev2/keymap/*/rules.mk' using KEYBOARD_LOCAL_FEATURES_MK. No change in build result. * add keyboards/helix/rev2/local_features.mk * add 'KEYBOARD_LOCAL_FEATURES_MK := $(dir $(lastword $(MAKEFILE_LIST)))local_features.mk' into keyboards/helix/rev2/rules.mk * remove HELIX_CUSTOMISE_MSG from keyboards/helix/rev2/keymaps/*/rules.mk * remove HELIX= process from keyboards/helix/rev2/keymaps/*/rules.mk * remove convert code(helix to standaerd) from keyboards/helix/rev2/keymaps/*/rules.mk * add 'include $(strip $(KEYBOARD_LOCAL_FEATURES_MK))' into keyboards/helix/rev2/keymaps/*/rules.mk * Added helix keyboard build NEW method. No change in build result. ## Helix build $ make helix:default ## no oled, no backlight, no underglow $ make helix/rev2/back:default ## no oled, with backlight, no underglow $ make helix/rev2/under:default ## no oled, no backlight, with underglow $ make helix/rev2/oled:default ## with oled, no backlight, not underglow $ make helix/rev2/oled/back:default ## with oled, with backlight, no underglow $ make helix/rev2/back/oled:default ## with oled, with backlight, no underglow $ make helix/rev2/oled/under:default ## with oled, no backlight, with underglow $ make helix/rev2/under/oled:default ## with oled, no backlight, with underglow ## Helix pico build $ make helix/pico:default ## no oled, no backlight, no underglow $ make helix/pico/back:default ## no oled, with backlight, no underglow $ make helix/pico/under:default ## no oled, no backlight, with underglow $ make helix/pico/oled:default ## with oled, no backlight, not underglow * add temporary test shell-spript * test end remove test script. Revert "add temporary test shell-spript" This reverts commit 5dac20cd0f8b4bc192edb2313652c1635f829657. * test end remove test script. Revert "add temporary test shell-spript" This reverts commit ec49f63b2dc0f2b3fe8c1c36ffa615cee2f7e3ed. * Extended the 'HELIX=' option. add keyword 'verbose', 'no_ani'. No change in build result. * update keyboards/helix/{rev2,pico}/keymaps/default/readme.md * rename KEYBOARD_TOP_DIR to HELIX_TOP_DIR in rules.mk * update keyboards/helix/{rev2,pico}/keymaps/default/readme_jp.md * rm keyboards/helix/pico/oled/rules.mk * update helix's readmes. All the ':avrdude' was replaced with ':flash'. * remove F_CPU, ARCH, F_USB, INTERRUPT_CONTROL_ENDPOINT from helix/rules.mk No change in build result.
2019-10-16 18:01:49 +00:00
# Helix Spacific Build Options
# you can uncomment and edit follows 7 Variables
# jp: 以下の7つの変数を必要に応じて編集し、コメントアウトをはずします。
# HELIX_ROWS = 5 # Helix Rows is 4 or 5
2020 November 28 Breaking Changes Update (#11053) * Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
2020-11-28 20:02:18 +00:00
# OLED_ENABLE = yes # OLED_ENABLE
[Keyboard] Cleanup helix rules options (#6952) * add temporary test shell-spript * Use LINK_TIME_OPTIMIZATION_ENABLE instead of Link_Time_Optimization No change in build result. * Helix config.h use '#pragma once' No change in build result. * Helix helix.h,rev?/rev?.h,pico/pico.h use '#pragma once' No change in build result. * Use drivers/avr/pro_micro.h instead of keyboards/helix/pro_micro.h No change in build result. * remove keyboards/helix/{rev2|pico}/serial_config.h No change in build result. * 'HELIX_ROWS' macro is now referenced only in rev1/config.h and rev2/config.h. No change in build result. * The contents of helix/rules.mk were distributed to subdirectories. This is a preparation to create a new subdirectory for helix code using split_common. No change in build result. remove 'USE_I2C = yes', 'SUBPROJECT_rev1 = no' from keyboards/helix/rules.mk. follow code move from keyboards/helix/rules.mk to keyboards/helix/{rev1,rev2,pico}/rules.mk. ---- SRC += i2c.c SRC += serial.c SRC += ssd1306.c CUSTOM_MATRIX = yes --- * helix/{i2c.[ch], serial.[ch], ssd1306.[ch]} move into helix/local_drivers/ No change in build result. * Simplified 'helix/pico/keymap/*/rules.mk' using KEYBOARD_LOCAL_FEATURES_MK. No change in build result. * add keyboards/helix/pico/local_features.mk * add 'KEYBOARD_LOCAL_FEATURES_MK := $(dir $(lastword $(MAKEFILE_LIST)))local_features.mk' into keyboards/helix/pico/rules.mk * remove HELIX_CUSTOMISE_MSG from keyboards/helix/pico/keymaps/*/rules.mk * remove HELIX= process from keyboards/helix/pico/keymaps/*/rules.mk * remove convert code(helix to standaerd) from keyboards/helix/pico/keymaps/*/rules.mk * add 'include $(strip $(KEYBOARD_LOCAL_FEATURES_MK))' into keyboards/helix/pico/keymaps/*/rules.mk * Simplified 'helix/rev2/keymap/*/rules.mk' using KEYBOARD_LOCAL_FEATURES_MK. No change in build result. * add keyboards/helix/rev2/local_features.mk * add 'KEYBOARD_LOCAL_FEATURES_MK := $(dir $(lastword $(MAKEFILE_LIST)))local_features.mk' into keyboards/helix/rev2/rules.mk * remove HELIX_CUSTOMISE_MSG from keyboards/helix/rev2/keymaps/*/rules.mk * remove HELIX= process from keyboards/helix/rev2/keymaps/*/rules.mk * remove convert code(helix to standaerd) from keyboards/helix/rev2/keymaps/*/rules.mk * add 'include $(strip $(KEYBOARD_LOCAL_FEATURES_MK))' into keyboards/helix/rev2/keymaps/*/rules.mk * Added helix keyboard build NEW method. No change in build result. ## Helix build $ make helix:default ## no oled, no backlight, no underglow $ make helix/rev2/back:default ## no oled, with backlight, no underglow $ make helix/rev2/under:default ## no oled, no backlight, with underglow $ make helix/rev2/oled:default ## with oled, no backlight, not underglow $ make helix/rev2/oled/back:default ## with oled, with backlight, no underglow $ make helix/rev2/back/oled:default ## with oled, with backlight, no underglow $ make helix/rev2/oled/under:default ## with oled, no backlight, with underglow $ make helix/rev2/under/oled:default ## with oled, no backlight, with underglow ## Helix pico build $ make helix/pico:default ## no oled, no backlight, no underglow $ make helix/pico/back:default ## no oled, with backlight, no underglow $ make helix/pico/under:default ## no oled, no backlight, with underglow $ make helix/pico/oled:default ## with oled, no backlight, not underglow * add temporary test shell-spript * test end remove test script. Revert "add temporary test shell-spript" This reverts commit 5dac20cd0f8b4bc192edb2313652c1635f829657. * test end remove test script. Revert "add temporary test shell-spript" This reverts commit ec49f63b2dc0f2b3fe8c1c36ffa615cee2f7e3ed. * Extended the 'HELIX=' option. add keyword 'verbose', 'no_ani'. No change in build result. * update keyboards/helix/{rev2,pico}/keymaps/default/readme.md * rename KEYBOARD_TOP_DIR to HELIX_TOP_DIR in rules.mk * update keyboards/helix/{rev2,pico}/keymaps/default/readme_jp.md * rm keyboards/helix/pico/oled/rules.mk * update helix's readmes. All the ':avrdude' was replaced with ':flash'. * remove F_CPU, ARCH, F_USB, INTERRUPT_CONTROL_ENDPOINT from helix/rules.mk No change in build result.
2019-10-16 18:01:49 +00:00
# LOCAL_GLCDFONT = no # use each keymaps "helixfont.h" insted of "common/glcdfont.c"
# LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.)
# LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.)
# LED_ANIMATIONS = yes # LED animations
# IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone)
```
## 4行版Helix に対応する
rules.mk の下記の部分を編集して 5 を 4 に変更してください。
```
HELIX_ROWS = 4 # Helix Rows is 4 or 5
```
## RGB バックライトを有効にする
rules.mk の下記の部分を編集して no を yes に変更してください。
```
LED_BACK_ENABLE = yes # LED backlight (Enable WS2812 RGB underlight.)
```
## RGB Underglow を有効にする
rules.mk の下記の部分を編集して no を yes に変更してください。
```
LED_UNDERGLOW_ENABLE = yes # LED underglow (Enable WS2812 RGB underlight.)
```
2020 November 28 Breaking Changes Update (#11053) * Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
2020-11-28 20:02:18 +00:00
## OLEDを無効にする
2020 November 28 Breaking Changes Update (#11053) * Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
2020-11-28 20:02:18 +00:00
OLED はデフォルトで有効になっています。
無効にしたいときは rules.mk の下記の部分を編集して yes を no に変更してください。
```
2020 November 28 Breaking Changes Update (#11053) * Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
2020-11-28 20:02:18 +00:00
OLED_ENABLE = no # OLED_ENABLE
```
## iPad/iPhoneサポートを有効にする。
rules.mk の下記の部分を編集して no を yes に変更してください。
RBG Underglow や RGBバックライトの輝度を抑えて、iPad, iPhone にも接続できるようになります。
```
IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone)
```
[Keyboard] Cleanup helix rules options (#6952) * add temporary test shell-spript * Use LINK_TIME_OPTIMIZATION_ENABLE instead of Link_Time_Optimization No change in build result. * Helix config.h use '#pragma once' No change in build result. * Helix helix.h,rev?/rev?.h,pico/pico.h use '#pragma once' No change in build result. * Use drivers/avr/pro_micro.h instead of keyboards/helix/pro_micro.h No change in build result. * remove keyboards/helix/{rev2|pico}/serial_config.h No change in build result. * 'HELIX_ROWS' macro is now referenced only in rev1/config.h and rev2/config.h. No change in build result. * The contents of helix/rules.mk were distributed to subdirectories. This is a preparation to create a new subdirectory for helix code using split_common. No change in build result. remove 'USE_I2C = yes', 'SUBPROJECT_rev1 = no' from keyboards/helix/rules.mk. follow code move from keyboards/helix/rules.mk to keyboards/helix/{rev1,rev2,pico}/rules.mk. ---- SRC += i2c.c SRC += serial.c SRC += ssd1306.c CUSTOM_MATRIX = yes --- * helix/{i2c.[ch], serial.[ch], ssd1306.[ch]} move into helix/local_drivers/ No change in build result. * Simplified 'helix/pico/keymap/*/rules.mk' using KEYBOARD_LOCAL_FEATURES_MK. No change in build result. * add keyboards/helix/pico/local_features.mk * add 'KEYBOARD_LOCAL_FEATURES_MK := $(dir $(lastword $(MAKEFILE_LIST)))local_features.mk' into keyboards/helix/pico/rules.mk * remove HELIX_CUSTOMISE_MSG from keyboards/helix/pico/keymaps/*/rules.mk * remove HELIX= process from keyboards/helix/pico/keymaps/*/rules.mk * remove convert code(helix to standaerd) from keyboards/helix/pico/keymaps/*/rules.mk * add 'include $(strip $(KEYBOARD_LOCAL_FEATURES_MK))' into keyboards/helix/pico/keymaps/*/rules.mk * Simplified 'helix/rev2/keymap/*/rules.mk' using KEYBOARD_LOCAL_FEATURES_MK. No change in build result. * add keyboards/helix/rev2/local_features.mk * add 'KEYBOARD_LOCAL_FEATURES_MK := $(dir $(lastword $(MAKEFILE_LIST)))local_features.mk' into keyboards/helix/rev2/rules.mk * remove HELIX_CUSTOMISE_MSG from keyboards/helix/rev2/keymaps/*/rules.mk * remove HELIX= process from keyboards/helix/rev2/keymaps/*/rules.mk * remove convert code(helix to standaerd) from keyboards/helix/rev2/keymaps/*/rules.mk * add 'include $(strip $(KEYBOARD_LOCAL_FEATURES_MK))' into keyboards/helix/rev2/keymaps/*/rules.mk * Added helix keyboard build NEW method. No change in build result. ## Helix build $ make helix:default ## no oled, no backlight, no underglow $ make helix/rev2/back:default ## no oled, with backlight, no underglow $ make helix/rev2/under:default ## no oled, no backlight, with underglow $ make helix/rev2/oled:default ## with oled, no backlight, not underglow $ make helix/rev2/oled/back:default ## with oled, with backlight, no underglow $ make helix/rev2/back/oled:default ## with oled, with backlight, no underglow $ make helix/rev2/oled/under:default ## with oled, no backlight, with underglow $ make helix/rev2/under/oled:default ## with oled, no backlight, with underglow ## Helix pico build $ make helix/pico:default ## no oled, no backlight, no underglow $ make helix/pico/back:default ## no oled, with backlight, no underglow $ make helix/pico/under:default ## no oled, no backlight, with underglow $ make helix/pico/oled:default ## with oled, no backlight, not underglow * add temporary test shell-spript * test end remove test script. Revert "add temporary test shell-spript" This reverts commit 5dac20cd0f8b4bc192edb2313652c1635f829657. * test end remove test script. Revert "add temporary test shell-spript" This reverts commit ec49f63b2dc0f2b3fe8c1c36ffa615cee2f7e3ed. * Extended the 'HELIX=' option. add keyword 'verbose', 'no_ani'. No change in build result. * update keyboards/helix/{rev2,pico}/keymaps/default/readme.md * rename KEYBOARD_TOP_DIR to HELIX_TOP_DIR in rules.mk * update keyboards/helix/{rev2,pico}/keymaps/default/readme_jp.md * rm keyboards/helix/pico/oled/rules.mk * update helix's readmes. All the ':avrdude' was replaced with ':flash'. * remove F_CPU, ARCH, F_USB, INTERRUPT_CONTROL_ENDPOINT from helix/rules.mk No change in build result.
2019-10-16 18:01:49 +00:00
## コンパイルの仕方
コンパイルは、qmk_firmware のトップディレクトリで行います。
```
$ cd qmk_firmware
```
qmk_firmwareでは各キーボードのコンパイルは、`<キーボード名>:<キーマップ名>`という指定で行います。
```
$ make helix:default
```
キーボードへの書き込みまで同時に行うには下記のように`:flash`を付けます。
```
$ make helix:default:flash
```
コンパイル結果と中間生成物を消去したい場合は以下のようにします。
```
$ make helix:default:clean
```
上記の、rules.mk によるカスタマイズ項目の一部は下記のようにコマンド上で直接指定することも可能です。
2020 November 28 Breaking Changes Update (#11053) * Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
2020-11-28 20:02:18 +00:00
OLED を無効にしてコンパイルしてキーボードへの書き込む。
[Keyboard] Cleanup helix rules options (#6952) * add temporary test shell-spript * Use LINK_TIME_OPTIMIZATION_ENABLE instead of Link_Time_Optimization No change in build result. * Helix config.h use '#pragma once' No change in build result. * Helix helix.h,rev?/rev?.h,pico/pico.h use '#pragma once' No change in build result. * Use drivers/avr/pro_micro.h instead of keyboards/helix/pro_micro.h No change in build result. * remove keyboards/helix/{rev2|pico}/serial_config.h No change in build result. * 'HELIX_ROWS' macro is now referenced only in rev1/config.h and rev2/config.h. No change in build result. * The contents of helix/rules.mk were distributed to subdirectories. This is a preparation to create a new subdirectory for helix code using split_common. No change in build result. remove 'USE_I2C = yes', 'SUBPROJECT_rev1 = no' from keyboards/helix/rules.mk. follow code move from keyboards/helix/rules.mk to keyboards/helix/{rev1,rev2,pico}/rules.mk. ---- SRC += i2c.c SRC += serial.c SRC += ssd1306.c CUSTOM_MATRIX = yes --- * helix/{i2c.[ch], serial.[ch], ssd1306.[ch]} move into helix/local_drivers/ No change in build result. * Simplified 'helix/pico/keymap/*/rules.mk' using KEYBOARD_LOCAL_FEATURES_MK. No change in build result. * add keyboards/helix/pico/local_features.mk * add 'KEYBOARD_LOCAL_FEATURES_MK := $(dir $(lastword $(MAKEFILE_LIST)))local_features.mk' into keyboards/helix/pico/rules.mk * remove HELIX_CUSTOMISE_MSG from keyboards/helix/pico/keymaps/*/rules.mk * remove HELIX= process from keyboards/helix/pico/keymaps/*/rules.mk * remove convert code(helix to standaerd) from keyboards/helix/pico/keymaps/*/rules.mk * add 'include $(strip $(KEYBOARD_LOCAL_FEATURES_MK))' into keyboards/helix/pico/keymaps/*/rules.mk * Simplified 'helix/rev2/keymap/*/rules.mk' using KEYBOARD_LOCAL_FEATURES_MK. No change in build result. * add keyboards/helix/rev2/local_features.mk * add 'KEYBOARD_LOCAL_FEATURES_MK := $(dir $(lastword $(MAKEFILE_LIST)))local_features.mk' into keyboards/helix/rev2/rules.mk * remove HELIX_CUSTOMISE_MSG from keyboards/helix/rev2/keymaps/*/rules.mk * remove HELIX= process from keyboards/helix/rev2/keymaps/*/rules.mk * remove convert code(helix to standaerd) from keyboards/helix/rev2/keymaps/*/rules.mk * add 'include $(strip $(KEYBOARD_LOCAL_FEATURES_MK))' into keyboards/helix/rev2/keymaps/*/rules.mk * Added helix keyboard build NEW method. No change in build result. ## Helix build $ make helix:default ## no oled, no backlight, no underglow $ make helix/rev2/back:default ## no oled, with backlight, no underglow $ make helix/rev2/under:default ## no oled, no backlight, with underglow $ make helix/rev2/oled:default ## with oled, no backlight, not underglow $ make helix/rev2/oled/back:default ## with oled, with backlight, no underglow $ make helix/rev2/back/oled:default ## with oled, with backlight, no underglow $ make helix/rev2/oled/under:default ## with oled, no backlight, with underglow $ make helix/rev2/under/oled:default ## with oled, no backlight, with underglow ## Helix pico build $ make helix/pico:default ## no oled, no backlight, no underglow $ make helix/pico/back:default ## no oled, with backlight, no underglow $ make helix/pico/under:default ## no oled, no backlight, with underglow $ make helix/pico/oled:default ## with oled, no backlight, not underglow * add temporary test shell-spript * test end remove test script. Revert "add temporary test shell-spript" This reverts commit 5dac20cd0f8b4bc192edb2313652c1635f829657. * test end remove test script. Revert "add temporary test shell-spript" This reverts commit ec49f63b2dc0f2b3fe8c1c36ffa615cee2f7e3ed. * Extended the 'HELIX=' option. add keyword 'verbose', 'no_ani'. No change in build result. * update keyboards/helix/{rev2,pico}/keymaps/default/readme.md * rename KEYBOARD_TOP_DIR to HELIX_TOP_DIR in rules.mk * update keyboards/helix/{rev2,pico}/keymaps/default/readme_jp.md * rm keyboards/helix/pico/oled/rules.mk * update helix's readmes. All the ':avrdude' was replaced with ':flash'. * remove F_CPU, ARCH, F_USB, INTERRUPT_CONTROL_ENDPOINT from helix/rules.mk No change in build result.
2019-10-16 18:01:49 +00:00
```
2020 November 28 Breaking Changes Update (#11053) * Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
2020-11-28 20:02:18 +00:00
$ make HELIX=no-oled helix/rev2:default:flash
[Keyboard] Cleanup helix rules options (#6952) * add temporary test shell-spript * Use LINK_TIME_OPTIMIZATION_ENABLE instead of Link_Time_Optimization No change in build result. * Helix config.h use '#pragma once' No change in build result. * Helix helix.h,rev?/rev?.h,pico/pico.h use '#pragma once' No change in build result. * Use drivers/avr/pro_micro.h instead of keyboards/helix/pro_micro.h No change in build result. * remove keyboards/helix/{rev2|pico}/serial_config.h No change in build result. * 'HELIX_ROWS' macro is now referenced only in rev1/config.h and rev2/config.h. No change in build result. * The contents of helix/rules.mk were distributed to subdirectories. This is a preparation to create a new subdirectory for helix code using split_common. No change in build result. remove 'USE_I2C = yes', 'SUBPROJECT_rev1 = no' from keyboards/helix/rules.mk. follow code move from keyboards/helix/rules.mk to keyboards/helix/{rev1,rev2,pico}/rules.mk. ---- SRC += i2c.c SRC += serial.c SRC += ssd1306.c CUSTOM_MATRIX = yes --- * helix/{i2c.[ch], serial.[ch], ssd1306.[ch]} move into helix/local_drivers/ No change in build result. * Simplified 'helix/pico/keymap/*/rules.mk' using KEYBOARD_LOCAL_FEATURES_MK. No change in build result. * add keyboards/helix/pico/local_features.mk * add 'KEYBOARD_LOCAL_FEATURES_MK := $(dir $(lastword $(MAKEFILE_LIST)))local_features.mk' into keyboards/helix/pico/rules.mk * remove HELIX_CUSTOMISE_MSG from keyboards/helix/pico/keymaps/*/rules.mk * remove HELIX= process from keyboards/helix/pico/keymaps/*/rules.mk * remove convert code(helix to standaerd) from keyboards/helix/pico/keymaps/*/rules.mk * add 'include $(strip $(KEYBOARD_LOCAL_FEATURES_MK))' into keyboards/helix/pico/keymaps/*/rules.mk * Simplified 'helix/rev2/keymap/*/rules.mk' using KEYBOARD_LOCAL_FEATURES_MK. No change in build result. * add keyboards/helix/rev2/local_features.mk * add 'KEYBOARD_LOCAL_FEATURES_MK := $(dir $(lastword $(MAKEFILE_LIST)))local_features.mk' into keyboards/helix/rev2/rules.mk * remove HELIX_CUSTOMISE_MSG from keyboards/helix/rev2/keymaps/*/rules.mk * remove HELIX= process from keyboards/helix/rev2/keymaps/*/rules.mk * remove convert code(helix to standaerd) from keyboards/helix/rev2/keymaps/*/rules.mk * add 'include $(strip $(KEYBOARD_LOCAL_FEATURES_MK))' into keyboards/helix/rev2/keymaps/*/rules.mk * Added helix keyboard build NEW method. No change in build result. ## Helix build $ make helix:default ## no oled, no backlight, no underglow $ make helix/rev2/back:default ## no oled, with backlight, no underglow $ make helix/rev2/under:default ## no oled, no backlight, with underglow $ make helix/rev2/oled:default ## with oled, no backlight, not underglow $ make helix/rev2/oled/back:default ## with oled, with backlight, no underglow $ make helix/rev2/back/oled:default ## with oled, with backlight, no underglow $ make helix/rev2/oled/under:default ## with oled, no backlight, with underglow $ make helix/rev2/under/oled:default ## with oled, no backlight, with underglow ## Helix pico build $ make helix/pico:default ## no oled, no backlight, no underglow $ make helix/pico/back:default ## no oled, with backlight, no underglow $ make helix/pico/under:default ## no oled, no backlight, with underglow $ make helix/pico/oled:default ## with oled, no backlight, not underglow * add temporary test shell-spript * test end remove test script. Revert "add temporary test shell-spript" This reverts commit 5dac20cd0f8b4bc192edb2313652c1635f829657. * test end remove test script. Revert "add temporary test shell-spript" This reverts commit ec49f63b2dc0f2b3fe8c1c36ffa615cee2f7e3ed. * Extended the 'HELIX=' option. add keyword 'verbose', 'no_ani'. No change in build result. * update keyboards/helix/{rev2,pico}/keymaps/default/readme.md * rename KEYBOARD_TOP_DIR to HELIX_TOP_DIR in rules.mk * update keyboards/helix/{rev2,pico}/keymaps/default/readme_jp.md * rm keyboards/helix/pico/oled/rules.mk * update helix's readmes. All the ':avrdude' was replaced with ':flash'. * remove F_CPU, ARCH, F_USB, INTERRUPT_CONTROL_ENDPOINT from helix/rules.mk No change in build result.
2019-10-16 18:01:49 +00:00
```
RGB バックライトを有効にしてコンパイルしてキーボードへ書き込む。
```
$ make helix/rev2/back:default:flash
```
RGB Underglow を有効にしてコンパイルしてキーボードへ書き込む。
```
$ make helix/rev2/under:default:flash
```
2020 November 28 Breaking Changes Update (#11053) * Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
2020-11-28 20:02:18 +00:00
OLED を無効にして、RGB バックライトを有効にしてコンパイルしてキーボードへ書き込む。
[Keyboard] Cleanup helix rules options (#6952) * add temporary test shell-spript * Use LINK_TIME_OPTIMIZATION_ENABLE instead of Link_Time_Optimization No change in build result. * Helix config.h use '#pragma once' No change in build result. * Helix helix.h,rev?/rev?.h,pico/pico.h use '#pragma once' No change in build result. * Use drivers/avr/pro_micro.h instead of keyboards/helix/pro_micro.h No change in build result. * remove keyboards/helix/{rev2|pico}/serial_config.h No change in build result. * 'HELIX_ROWS' macro is now referenced only in rev1/config.h and rev2/config.h. No change in build result. * The contents of helix/rules.mk were distributed to subdirectories. This is a preparation to create a new subdirectory for helix code using split_common. No change in build result. remove 'USE_I2C = yes', 'SUBPROJECT_rev1 = no' from keyboards/helix/rules.mk. follow code move from keyboards/helix/rules.mk to keyboards/helix/{rev1,rev2,pico}/rules.mk. ---- SRC += i2c.c SRC += serial.c SRC += ssd1306.c CUSTOM_MATRIX = yes --- * helix/{i2c.[ch], serial.[ch], ssd1306.[ch]} move into helix/local_drivers/ No change in build result. * Simplified 'helix/pico/keymap/*/rules.mk' using KEYBOARD_LOCAL_FEATURES_MK. No change in build result. * add keyboards/helix/pico/local_features.mk * add 'KEYBOARD_LOCAL_FEATURES_MK := $(dir $(lastword $(MAKEFILE_LIST)))local_features.mk' into keyboards/helix/pico/rules.mk * remove HELIX_CUSTOMISE_MSG from keyboards/helix/pico/keymaps/*/rules.mk * remove HELIX= process from keyboards/helix/pico/keymaps/*/rules.mk * remove convert code(helix to standaerd) from keyboards/helix/pico/keymaps/*/rules.mk * add 'include $(strip $(KEYBOARD_LOCAL_FEATURES_MK))' into keyboards/helix/pico/keymaps/*/rules.mk * Simplified 'helix/rev2/keymap/*/rules.mk' using KEYBOARD_LOCAL_FEATURES_MK. No change in build result. * add keyboards/helix/rev2/local_features.mk * add 'KEYBOARD_LOCAL_FEATURES_MK := $(dir $(lastword $(MAKEFILE_LIST)))local_features.mk' into keyboards/helix/rev2/rules.mk * remove HELIX_CUSTOMISE_MSG from keyboards/helix/rev2/keymaps/*/rules.mk * remove HELIX= process from keyboards/helix/rev2/keymaps/*/rules.mk * remove convert code(helix to standaerd) from keyboards/helix/rev2/keymaps/*/rules.mk * add 'include $(strip $(KEYBOARD_LOCAL_FEATURES_MK))' into keyboards/helix/rev2/keymaps/*/rules.mk * Added helix keyboard build NEW method. No change in build result. ## Helix build $ make helix:default ## no oled, no backlight, no underglow $ make helix/rev2/back:default ## no oled, with backlight, no underglow $ make helix/rev2/under:default ## no oled, no backlight, with underglow $ make helix/rev2/oled:default ## with oled, no backlight, not underglow $ make helix/rev2/oled/back:default ## with oled, with backlight, no underglow $ make helix/rev2/back/oled:default ## with oled, with backlight, no underglow $ make helix/rev2/oled/under:default ## with oled, no backlight, with underglow $ make helix/rev2/under/oled:default ## with oled, no backlight, with underglow ## Helix pico build $ make helix/pico:default ## no oled, no backlight, no underglow $ make helix/pico/back:default ## no oled, with backlight, no underglow $ make helix/pico/under:default ## no oled, no backlight, with underglow $ make helix/pico/oled:default ## with oled, no backlight, not underglow * add temporary test shell-spript * test end remove test script. Revert "add temporary test shell-spript" This reverts commit 5dac20cd0f8b4bc192edb2313652c1635f829657. * test end remove test script. Revert "add temporary test shell-spript" This reverts commit ec49f63b2dc0f2b3fe8c1c36ffa615cee2f7e3ed. * Extended the 'HELIX=' option. add keyword 'verbose', 'no_ani'. No change in build result. * update keyboards/helix/{rev2,pico}/keymaps/default/readme.md * rename KEYBOARD_TOP_DIR to HELIX_TOP_DIR in rules.mk * update keyboards/helix/{rev2,pico}/keymaps/default/readme_jp.md * rm keyboards/helix/pico/oled/rules.mk * update helix's readmes. All the ':avrdude' was replaced with ':flash'. * remove F_CPU, ARCH, F_USB, INTERRUPT_CONTROL_ENDPOINT from helix/rules.mk No change in build result.
2019-10-16 18:01:49 +00:00
```
2020 November 28 Breaking Changes Update (#11053) * Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
2020-11-28 20:02:18 +00:00
$ make HELIX=no-oled helix/rev2/back:default:flash
[Keyboard] Cleanup helix rules options (#6952) * add temporary test shell-spript * Use LINK_TIME_OPTIMIZATION_ENABLE instead of Link_Time_Optimization No change in build result. * Helix config.h use '#pragma once' No change in build result. * Helix helix.h,rev?/rev?.h,pico/pico.h use '#pragma once' No change in build result. * Use drivers/avr/pro_micro.h instead of keyboards/helix/pro_micro.h No change in build result. * remove keyboards/helix/{rev2|pico}/serial_config.h No change in build result. * 'HELIX_ROWS' macro is now referenced only in rev1/config.h and rev2/config.h. No change in build result. * The contents of helix/rules.mk were distributed to subdirectories. This is a preparation to create a new subdirectory for helix code using split_common. No change in build result. remove 'USE_I2C = yes', 'SUBPROJECT_rev1 = no' from keyboards/helix/rules.mk. follow code move from keyboards/helix/rules.mk to keyboards/helix/{rev1,rev2,pico}/rules.mk. ---- SRC += i2c.c SRC += serial.c SRC += ssd1306.c CUSTOM_MATRIX = yes --- * helix/{i2c.[ch], serial.[ch], ssd1306.[ch]} move into helix/local_drivers/ No change in build result. * Simplified 'helix/pico/keymap/*/rules.mk' using KEYBOARD_LOCAL_FEATURES_MK. No change in build result. * add keyboards/helix/pico/local_features.mk * add 'KEYBOARD_LOCAL_FEATURES_MK := $(dir $(lastword $(MAKEFILE_LIST)))local_features.mk' into keyboards/helix/pico/rules.mk * remove HELIX_CUSTOMISE_MSG from keyboards/helix/pico/keymaps/*/rules.mk * remove HELIX= process from keyboards/helix/pico/keymaps/*/rules.mk * remove convert code(helix to standaerd) from keyboards/helix/pico/keymaps/*/rules.mk * add 'include $(strip $(KEYBOARD_LOCAL_FEATURES_MK))' into keyboards/helix/pico/keymaps/*/rules.mk * Simplified 'helix/rev2/keymap/*/rules.mk' using KEYBOARD_LOCAL_FEATURES_MK. No change in build result. * add keyboards/helix/rev2/local_features.mk * add 'KEYBOARD_LOCAL_FEATURES_MK := $(dir $(lastword $(MAKEFILE_LIST)))local_features.mk' into keyboards/helix/rev2/rules.mk * remove HELIX_CUSTOMISE_MSG from keyboards/helix/rev2/keymaps/*/rules.mk * remove HELIX= process from keyboards/helix/rev2/keymaps/*/rules.mk * remove convert code(helix to standaerd) from keyboards/helix/rev2/keymaps/*/rules.mk * add 'include $(strip $(KEYBOARD_LOCAL_FEATURES_MK))' into keyboards/helix/rev2/keymaps/*/rules.mk * Added helix keyboard build NEW method. No change in build result. ## Helix build $ make helix:default ## no oled, no backlight, no underglow $ make helix/rev2/back:default ## no oled, with backlight, no underglow $ make helix/rev2/under:default ## no oled, no backlight, with underglow $ make helix/rev2/oled:default ## with oled, no backlight, not underglow $ make helix/rev2/oled/back:default ## with oled, with backlight, no underglow $ make helix/rev2/back/oled:default ## with oled, with backlight, no underglow $ make helix/rev2/oled/under:default ## with oled, no backlight, with underglow $ make helix/rev2/under/oled:default ## with oled, no backlight, with underglow ## Helix pico build $ make helix/pico:default ## no oled, no backlight, no underglow $ make helix/pico/back:default ## no oled, with backlight, no underglow $ make helix/pico/under:default ## no oled, no backlight, with underglow $ make helix/pico/oled:default ## with oled, no backlight, not underglow * add temporary test shell-spript * test end remove test script. Revert "add temporary test shell-spript" This reverts commit 5dac20cd0f8b4bc192edb2313652c1635f829657. * test end remove test script. Revert "add temporary test shell-spript" This reverts commit ec49f63b2dc0f2b3fe8c1c36ffa615cee2f7e3ed. * Extended the 'HELIX=' option. add keyword 'verbose', 'no_ani'. No change in build result. * update keyboards/helix/{rev2,pico}/keymaps/default/readme.md * rename KEYBOARD_TOP_DIR to HELIX_TOP_DIR in rules.mk * update keyboards/helix/{rev2,pico}/keymaps/default/readme_jp.md * rm keyboards/helix/pico/oled/rules.mk * update helix's readmes. All the ':avrdude' was replaced with ':flash'. * remove F_CPU, ARCH, F_USB, INTERRUPT_CONTROL_ENDPOINT from helix/rules.mk No change in build result.
2019-10-16 18:01:49 +00:00
```
2020 November 28 Breaking Changes Update (#11053) * Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
2020-11-28 20:02:18 +00:00
OLED を無効にして、RGB Underglowを有効にしてコンパイルしてキーボードへ書き込む。
[Keyboard] Cleanup helix rules options (#6952) * add temporary test shell-spript * Use LINK_TIME_OPTIMIZATION_ENABLE instead of Link_Time_Optimization No change in build result. * Helix config.h use '#pragma once' No change in build result. * Helix helix.h,rev?/rev?.h,pico/pico.h use '#pragma once' No change in build result. * Use drivers/avr/pro_micro.h instead of keyboards/helix/pro_micro.h No change in build result. * remove keyboards/helix/{rev2|pico}/serial_config.h No change in build result. * 'HELIX_ROWS' macro is now referenced only in rev1/config.h and rev2/config.h. No change in build result. * The contents of helix/rules.mk were distributed to subdirectories. This is a preparation to create a new subdirectory for helix code using split_common. No change in build result. remove 'USE_I2C = yes', 'SUBPROJECT_rev1 = no' from keyboards/helix/rules.mk. follow code move from keyboards/helix/rules.mk to keyboards/helix/{rev1,rev2,pico}/rules.mk. ---- SRC += i2c.c SRC += serial.c SRC += ssd1306.c CUSTOM_MATRIX = yes --- * helix/{i2c.[ch], serial.[ch], ssd1306.[ch]} move into helix/local_drivers/ No change in build result. * Simplified 'helix/pico/keymap/*/rules.mk' using KEYBOARD_LOCAL_FEATURES_MK. No change in build result. * add keyboards/helix/pico/local_features.mk * add 'KEYBOARD_LOCAL_FEATURES_MK := $(dir $(lastword $(MAKEFILE_LIST)))local_features.mk' into keyboards/helix/pico/rules.mk * remove HELIX_CUSTOMISE_MSG from keyboards/helix/pico/keymaps/*/rules.mk * remove HELIX= process from keyboards/helix/pico/keymaps/*/rules.mk * remove convert code(helix to standaerd) from keyboards/helix/pico/keymaps/*/rules.mk * add 'include $(strip $(KEYBOARD_LOCAL_FEATURES_MK))' into keyboards/helix/pico/keymaps/*/rules.mk * Simplified 'helix/rev2/keymap/*/rules.mk' using KEYBOARD_LOCAL_FEATURES_MK. No change in build result. * add keyboards/helix/rev2/local_features.mk * add 'KEYBOARD_LOCAL_FEATURES_MK := $(dir $(lastword $(MAKEFILE_LIST)))local_features.mk' into keyboards/helix/rev2/rules.mk * remove HELIX_CUSTOMISE_MSG from keyboards/helix/rev2/keymaps/*/rules.mk * remove HELIX= process from keyboards/helix/rev2/keymaps/*/rules.mk * remove convert code(helix to standaerd) from keyboards/helix/rev2/keymaps/*/rules.mk * add 'include $(strip $(KEYBOARD_LOCAL_FEATURES_MK))' into keyboards/helix/rev2/keymaps/*/rules.mk * Added helix keyboard build NEW method. No change in build result. ## Helix build $ make helix:default ## no oled, no backlight, no underglow $ make helix/rev2/back:default ## no oled, with backlight, no underglow $ make helix/rev2/under:default ## no oled, no backlight, with underglow $ make helix/rev2/oled:default ## with oled, no backlight, not underglow $ make helix/rev2/oled/back:default ## with oled, with backlight, no underglow $ make helix/rev2/back/oled:default ## with oled, with backlight, no underglow $ make helix/rev2/oled/under:default ## with oled, no backlight, with underglow $ make helix/rev2/under/oled:default ## with oled, no backlight, with underglow ## Helix pico build $ make helix/pico:default ## no oled, no backlight, no underglow $ make helix/pico/back:default ## no oled, with backlight, no underglow $ make helix/pico/under:default ## no oled, no backlight, with underglow $ make helix/pico/oled:default ## with oled, no backlight, not underglow * add temporary test shell-spript * test end remove test script. Revert "add temporary test shell-spript" This reverts commit 5dac20cd0f8b4bc192edb2313652c1635f829657. * test end remove test script. Revert "add temporary test shell-spript" This reverts commit ec49f63b2dc0f2b3fe8c1c36ffa615cee2f7e3ed. * Extended the 'HELIX=' option. add keyword 'verbose', 'no_ani'. No change in build result. * update keyboards/helix/{rev2,pico}/keymaps/default/readme.md * rename KEYBOARD_TOP_DIR to HELIX_TOP_DIR in rules.mk * update keyboards/helix/{rev2,pico}/keymaps/default/readme_jp.md * rm keyboards/helix/pico/oled/rules.mk * update helix's readmes. All the ':avrdude' was replaced with ':flash'. * remove F_CPU, ARCH, F_USB, INTERRUPT_CONTROL_ENDPOINT from helix/rules.mk No change in build result.
2019-10-16 18:01:49 +00:00
```
2020 November 28 Breaking Changes Update (#11053) * Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
2020-11-28 20:02:18 +00:00
$ make HELIX=no-oled helix/rev2/under:default:flash
[Keyboard] Cleanup helix rules options (#6952) * add temporary test shell-spript * Use LINK_TIME_OPTIMIZATION_ENABLE instead of Link_Time_Optimization No change in build result. * Helix config.h use '#pragma once' No change in build result. * Helix helix.h,rev?/rev?.h,pico/pico.h use '#pragma once' No change in build result. * Use drivers/avr/pro_micro.h instead of keyboards/helix/pro_micro.h No change in build result. * remove keyboards/helix/{rev2|pico}/serial_config.h No change in build result. * 'HELIX_ROWS' macro is now referenced only in rev1/config.h and rev2/config.h. No change in build result. * The contents of helix/rules.mk were distributed to subdirectories. This is a preparation to create a new subdirectory for helix code using split_common. No change in build result. remove 'USE_I2C = yes', 'SUBPROJECT_rev1 = no' from keyboards/helix/rules.mk. follow code move from keyboards/helix/rules.mk to keyboards/helix/{rev1,rev2,pico}/rules.mk. ---- SRC += i2c.c SRC += serial.c SRC += ssd1306.c CUSTOM_MATRIX = yes --- * helix/{i2c.[ch], serial.[ch], ssd1306.[ch]} move into helix/local_drivers/ No change in build result. * Simplified 'helix/pico/keymap/*/rules.mk' using KEYBOARD_LOCAL_FEATURES_MK. No change in build result. * add keyboards/helix/pico/local_features.mk * add 'KEYBOARD_LOCAL_FEATURES_MK := $(dir $(lastword $(MAKEFILE_LIST)))local_features.mk' into keyboards/helix/pico/rules.mk * remove HELIX_CUSTOMISE_MSG from keyboards/helix/pico/keymaps/*/rules.mk * remove HELIX= process from keyboards/helix/pico/keymaps/*/rules.mk * remove convert code(helix to standaerd) from keyboards/helix/pico/keymaps/*/rules.mk * add 'include $(strip $(KEYBOARD_LOCAL_FEATURES_MK))' into keyboards/helix/pico/keymaps/*/rules.mk * Simplified 'helix/rev2/keymap/*/rules.mk' using KEYBOARD_LOCAL_FEATURES_MK. No change in build result. * add keyboards/helix/rev2/local_features.mk * add 'KEYBOARD_LOCAL_FEATURES_MK := $(dir $(lastword $(MAKEFILE_LIST)))local_features.mk' into keyboards/helix/rev2/rules.mk * remove HELIX_CUSTOMISE_MSG from keyboards/helix/rev2/keymaps/*/rules.mk * remove HELIX= process from keyboards/helix/rev2/keymaps/*/rules.mk * remove convert code(helix to standaerd) from keyboards/helix/rev2/keymaps/*/rules.mk * add 'include $(strip $(KEYBOARD_LOCAL_FEATURES_MK))' into keyboards/helix/rev2/keymaps/*/rules.mk * Added helix keyboard build NEW method. No change in build result. ## Helix build $ make helix:default ## no oled, no backlight, no underglow $ make helix/rev2/back:default ## no oled, with backlight, no underglow $ make helix/rev2/under:default ## no oled, no backlight, with underglow $ make helix/rev2/oled:default ## with oled, no backlight, not underglow $ make helix/rev2/oled/back:default ## with oled, with backlight, no underglow $ make helix/rev2/back/oled:default ## with oled, with backlight, no underglow $ make helix/rev2/oled/under:default ## with oled, no backlight, with underglow $ make helix/rev2/under/oled:default ## with oled, no backlight, with underglow ## Helix pico build $ make helix/pico:default ## no oled, no backlight, no underglow $ make helix/pico/back:default ## no oled, with backlight, no underglow $ make helix/pico/under:default ## no oled, no backlight, with underglow $ make helix/pico/oled:default ## with oled, no backlight, not underglow * add temporary test shell-spript * test end remove test script. Revert "add temporary test shell-spript" This reverts commit 5dac20cd0f8b4bc192edb2313652c1635f829657. * test end remove test script. Revert "add temporary test shell-spript" This reverts commit ec49f63b2dc0f2b3fe8c1c36ffa615cee2f7e3ed. * Extended the 'HELIX=' option. add keyword 'verbose', 'no_ani'. No change in build result. * update keyboards/helix/{rev2,pico}/keymaps/default/readme.md * rename KEYBOARD_TOP_DIR to HELIX_TOP_DIR in rules.mk * update keyboards/helix/{rev2,pico}/keymaps/default/readme_jp.md * rm keyboards/helix/pico/oled/rules.mk * update helix's readmes. All the ':avrdude' was replaced with ':flash'. * remove F_CPU, ARCH, F_USB, INTERRUPT_CONTROL_ENDPOINT from helix/rules.mk No change in build result.
2019-10-16 18:01:49 +00:00
```
## リンク
* さらに詳細は、[こちら helix/Doc/firmware_jp.md](https://github.com/MakotoKurauchi/helix/blob/master/Doc/firmware_jp.md)をご覧ください。
* [Helix top](https://github.com/MakotoKurauchi/helix)