Nulo/qmk_firmware
1
0
Fork 0
Code Releases Activity
qmk_firmware/keyboards/rgbkb/zygomorph/readme.md

16 lines
1.1 KiB
Markdown
Raw Permalink Normal View History

[Keyboard] Adding RGBKB Zygomorph Keyboard (#5841) * Initial Zygomorph 5x6 code Split is not working yet * layout changes implement 4 row config option (not done yet), remove layout comments in layout.c * Zygomorph layouts for 5x12, 5x6, 4x12, and 4x6 Also, info.json *should* be nearly usable for the configurator * temporary fix for pin D5 being broken * show D5 issue comment * add build notes * Pin B7 broken in split why? * remove fix * Fix some pin assignments * begin to fix keymap * Create new 5x6 layout * update key positions * Initial Zygomorph 5x6 code Split is not working yet * layout changes implement 4 row config option (not done yet), remove layout comments in layout.c * Zygomorph layouts for 5x12, 5x6, 4x12, and 4x6 Also, info.json *should* be nearly usable for the configurator * temporary fix for pin D5 being broken * show D5 issue comment * add build notes * Pin B7 broken in split why? * remove fix * Fix some pin assignments * begin to fix keymap * Create new 5x6 layout * Rough first pass at split common conversion. Keymap cleanup to cover just the basics. Broke OLED code out into separate example. * Fix readme * Removal of old encoder / oled driver, fix for layout macros * small update * xulkal zygomorph keymaps * Removed the LED_MIRRORED option as leds are always mirrored on Zygomorph * Xulkal keymaps update * split rgb light support * fix line endings * Apply suggestions from code review Co-Authored-By: zvecr <git@zvecr.com> * More layout and compile fixes from pr review * Cleaning up rules.mk files * Apply suggestions from code review Co-Authored-By: zvecr <git@zvecr.com> * Updating defaults * Apply suggestions from code review Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
2019-05-12 05:42:57 +00:00
# Zygomorph
![Zygomorph](https://cdn.shopify.com/s/files/1/0008/8827/5005/products/20190107_004053_2048x2048.jpg?v=1549333933)
Zygomorph is the thinnest keyboard with a fully enclosed case. It's only 3.2mm thick below the switches, including screws. It can be used in 5x6 and 4x6 split, or 5x12 and 4x12 combined. It has per-key RGB, supports Kailh Choc and MX switches, and has 10 rotary encoder positions per half (only one can be used per half). The board has pre-soldered components, including type C ports and ATmega32U4. The build guide can be found [here](https://rgbkb.gitbook.io/rgbkb-build-guides/zygomorph-build-guide/).
Keyboard Maintainer: [Legonut](https://github.com/Legonut)
Hardware Supported: Zygomorph R1.0
Hardware Availability: [RGBKB](https://www.rgbkb.net)
Make example for this keyboard (after setting up your build environment):
[Keyboard] Create RGBKB Folder (#5858) * Move Sol, Zen, & Zygomorph keyboards to RGBKB folder * Updated default keymaps * Fixing more areas due too folder moves * Fixing Zen layer numbers * Fixing zygomorph layer comments * Fixing Colmak comments * Fixing Sol Colmak readme * Macro alignment * Zen rev2 configuration json * Fixing sol ifdef * Fixing Sol info.json
2019-05-14 18:58:56 +00:00
make rgbkb/zygomorph:default
[Keyboard] Adding RGBKB Zygomorph Keyboard (#5841) * Initial Zygomorph 5x6 code Split is not working yet * layout changes implement 4 row config option (not done yet), remove layout comments in layout.c * Zygomorph layouts for 5x12, 5x6, 4x12, and 4x6 Also, info.json *should* be nearly usable for the configurator * temporary fix for pin D5 being broken * show D5 issue comment * add build notes * Pin B7 broken in split why? * remove fix * Fix some pin assignments * begin to fix keymap * Create new 5x6 layout * update key positions * Initial Zygomorph 5x6 code Split is not working yet * layout changes implement 4 row config option (not done yet), remove layout comments in layout.c * Zygomorph layouts for 5x12, 5x6, 4x12, and 4x6 Also, info.json *should* be nearly usable for the configurator * temporary fix for pin D5 being broken * show D5 issue comment * add build notes * Pin B7 broken in split why? * remove fix * Fix some pin assignments * begin to fix keymap * Create new 5x6 layout * Rough first pass at split common conversion. Keymap cleanup to cover just the basics. Broke OLED code out into separate example. * Fix readme * Removal of old encoder / oled driver, fix for layout macros * small update * xulkal zygomorph keymaps * Removed the LED_MIRRORED option as leds are always mirrored on Zygomorph * Xulkal keymaps update * split rgb light support * fix line endings * Apply suggestions from code review Co-Authored-By: zvecr <git@zvecr.com> * More layout and compile fixes from pr review * Cleaning up rules.mk files * Apply suggestions from code review Co-Authored-By: zvecr <git@zvecr.com> * Updating defaults * Apply suggestions from code review Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
2019-05-12 05:42:57 +00:00
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
Copy permalink