1
0
Fork 0
qmk_firmware/tmk_core/protocol/lufa/lufa.c

1294 lines
35 KiB
C
Raw Normal View History

/*
* Copyright 2012 Jun Wako <wakojun@gmail.com>
* This file is based on:
* LUFA-120219/Demos/Device/Lowlevel/KeyboardMouse
* LUFA-120219/Demos/Device/Lowlevel/GenericHID
*/
/*
LUFA Library
Copyright (C) Dean Camera, 2012.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
#include "report.h"
#include "host.h"
#include "host_driver.h"
#include "keyboard.h"
#include "action.h"
#include "led.h"
#include "sendchar.h"
#include "debug.h"
#ifdef SLEEP_LED_ENABLE
#include "sleep_led.h"
#endif
2013-03-26 07:55:45 +00:00
#include "suspend.h"
#include "descriptor.h"
#include "lufa.h"
2016-11-17 22:42:14 +00:00
#include "quantum.h"
#include <util/atomic.h>
#include "outputselect.h"
2015-10-24 00:12:04 +00:00
#ifdef NKRO_ENABLE
#include "keycode_config.h"
extern keymap_config_t keymap_config;
#endif
2016-01-20 05:06:52 +00:00
#ifdef AUDIO_ENABLE
#include <audio.h>
2015-10-24 00:12:04 +00:00
#endif
#ifdef BLUETOOTH_ENABLE
#ifdef MODULE_ADAFRUIT_BLE
#include "adafruit_ble.h"
#else
#include "bluetooth.h"
#endif
#endif
2016-08-01 05:02:52 +00:00
#ifdef VIRTSER_ENABLE
#include "virtser.h"
#endif
2016-11-24 01:16:38 +00:00
#if (defined(RGB_MIDI) | defined(RGBLIGHT_ANIMATIONS)) & defined(RGBLIGHT_ENABLE)
#include "rgblight.h"
2016-11-14 04:02:38 +00:00
#endif
2016-11-23 05:30:06 +00:00
#ifdef MIDI_ENABLE
#include "sysex_tools.h"
#endif
2016-11-28 07:31:16 +00:00
#ifdef RAW_ENABLE
#include "raw_hid.h"
#endif
uint8_t keyboard_idle = 0;
/* 0: Boot Protocol, 1: Report Protocol(default) */
uint8_t keyboard_protocol = 1;
static uint8_t keyboard_led_stats = 0;
static report_keyboard_t keyboard_report_sent;
2012-06-29 07:48:36 +00:00
2015-10-27 16:42:30 +00:00
#ifdef MIDI_ENABLE
2016-11-22 00:50:55 +00:00
static void usb_send_func(MidiDevice * device, uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2);
static void usb_get_midi(MidiDevice * device);
static void midi_usb_init(MidiDevice * device);
2015-10-27 16:42:30 +00:00
#endif
/* Host driver */
static uint8_t keyboard_leds(void);
static void send_keyboard(report_keyboard_t *report);
static void send_mouse(report_mouse_t *report);
static void send_system(uint16_t data);
static void send_consumer(uint16_t data);
host_driver_t lufa_driver = {
keyboard_leds,
send_keyboard,
send_mouse,
send_system,
2015-08-20 04:42:08 +00:00
send_consumer,
2015-08-21 14:46:53 +00:00
#ifdef MIDI_ENABLE
2015-08-20 04:42:08 +00:00
usb_send_func,
usb_get_midi,
2015-10-27 16:42:30 +00:00
midi_usb_init
2015-08-21 14:46:53 +00:00
#endif
2015-08-20 04:42:08 +00:00
};
2015-10-27 16:42:30 +00:00
/*******************************************************************************
* MIDI
******************************************************************************/
2015-08-21 14:46:53 +00:00
2015-08-24 23:31:12 +00:00
#ifdef MIDI_ENABLE
2015-08-20 04:42:08 +00:00
USB_ClassInfo_MIDI_Device_t USB_MIDI_Interface =
{
.Config =
{
2015-08-24 23:31:12 +00:00
.StreamingInterfaceNumber = AS_INTERFACE,
2015-08-20 04:42:08 +00:00
.DataINEndpoint =
{
2015-08-24 23:31:12 +00:00
.Address = MIDI_STREAM_IN_EPADDR,
2015-08-20 04:42:08 +00:00
.Size = MIDI_STREAM_EPSIZE,
.Banks = 1,
},
.DataOUTEndpoint =
{
2015-08-24 23:31:12 +00:00
.Address = MIDI_STREAM_OUT_EPADDR,
2015-08-20 04:42:08 +00:00
.Size = MIDI_STREAM_EPSIZE,
.Banks = 1,
},
},
};
2015-08-20 04:42:08 +00:00
#define SYSEX_START_OR_CONT 0x40
#define SYSEX_ENDS_IN_1 0x50
#define SYSEX_ENDS_IN_2 0x60
#define SYSEX_ENDS_IN_3 0x70
#define SYS_COMMON_1 0x50
#define SYS_COMMON_2 0x20
#define SYS_COMMON_3 0x30
2015-08-24 23:31:12 +00:00
#endif
2016-08-01 05:02:52 +00:00
#ifdef VIRTSER_ENABLE
USB_ClassInfo_CDC_Device_t cdc_device =
{
.Config =
{
.ControlInterfaceNumber = CCI_INTERFACE,
.DataINEndpoint =
{
.Address = CDC_IN_EPADDR,
.Size = CDC_EPSIZE,
.Banks = 1,
},
.DataOUTEndpoint =
{
.Address = CDC_OUT_EPADDR,
.Size = CDC_EPSIZE,
.Banks = 1,
},
.NotificationEndpoint =
{
.Address = CDC_NOTIFICATION_EPADDR,
.Size = CDC_NOTIFICATION_EPSIZE,
.Banks = 1,
},
},
};
#endif
2016-11-28 07:31:16 +00:00
#ifdef RAW_ENABLE
void raw_hid_send( uint8_t *data, uint8_t length )
{
// TODO: implement variable size packet
if ( length != RAW_EPSIZE )
{
return;
}
if (USB_DeviceState != DEVICE_STATE_Configured)
{
return;
}
// TODO: decide if we allow calls to raw_hid_send() in the middle
// of other endpoint usage.
uint8_t ep = Endpoint_GetCurrentEndpoint();
Endpoint_SelectEndpoint(RAW_IN_EPNUM);
// Check to see if the host is ready to accept another packet
if (Endpoint_IsINReady())
{
// Write data
Endpoint_Write_Stream_LE(data, RAW_EPSIZE, NULL);
// Finalize the stream transfer to send the last packet
Endpoint_ClearIN();
}
Endpoint_SelectEndpoint(ep);
}
__attribute__ ((weak))
void raw_hid_receive( uint8_t *data, uint8_t length )
{
// Users should #include "raw_hid.h" in their own code
// and implement this function there. Leave this as weak linkage
// so users can opt to not handle data coming in.
}
static void raw_hid_task(void)
{
// Create a temporary buffer to hold the read in data from the host
uint8_t data[RAW_EPSIZE];
bool data_read = false;
// Device must be connected and configured for the task to run
if (USB_DeviceState != DEVICE_STATE_Configured)
return;
Endpoint_SelectEndpoint(RAW_OUT_EPNUM);
// Check to see if a packet has been sent from the host
if (Endpoint_IsOUTReceived())
{
// Check to see if the packet contains data
if (Endpoint_IsReadWriteAllowed())
{
/* Read data */
Endpoint_Read_Stream_LE(data, sizeof(data), NULL);
data_read = true;
}
// Finalize the stream transfer to receive the last packet
Endpoint_ClearOUT();
if ( data_read )
{
raw_hid_receive( data, sizeof(data) );
}
}
}
#endif
2015-08-21 14:46:53 +00:00
/*******************************************************************************
* Console
******************************************************************************/
#ifdef CONSOLE_ENABLE
static void Console_Task(void)
{
/* Device must be connected and configured for the task to run */
if (USB_DeviceState != DEVICE_STATE_Configured)
return;
uint8_t ep = Endpoint_GetCurrentEndpoint();
#if 0
// TODO: impl receivechar()/recvchar()
Endpoint_SelectEndpoint(CONSOLE_OUT_EPNUM);
/* Check to see if a packet has been sent from the host */
if (Endpoint_IsOUTReceived())
{
/* Check to see if the packet contains data */
if (Endpoint_IsReadWriteAllowed())
{
/* Create a temporary buffer to hold the read in report from the host */
uint8_t ConsoleData[CONSOLE_EPSIZE];
/* Read Console Report Data */
Endpoint_Read_Stream_LE(&ConsoleData, sizeof(ConsoleData), NULL);
/* Process Console Report Data */
//ProcessConsoleHIDReport(ConsoleData);
}
/* Finalize the stream transfer to send the last packet */
Endpoint_ClearOUT();
}
#endif
/* IN packet */
Endpoint_SelectEndpoint(CONSOLE_IN_EPNUM);
if (!Endpoint_IsEnabled() || !Endpoint_IsConfigured()) {
Endpoint_SelectEndpoint(ep);
return;
}
// fill empty bank
while (Endpoint_IsReadWriteAllowed())
Endpoint_Write_8(0);
// flash senchar packet
if (Endpoint_IsINReady()) {
Endpoint_ClearIN();
}
Endpoint_SelectEndpoint(ep);
}
#endif
/*******************************************************************************
* USB Events
******************************************************************************/
/*
* Event Order of Plug in:
* 0) EVENT_USB_Device_Connect
* 1) EVENT_USB_Device_Suspend
* 2) EVENT_USB_Device_Reset
* 3) EVENT_USB_Device_Wake
*/
void EVENT_USB_Device_Connect(void)
{
print("[C]");
/* For battery powered device */
if (!USB_IsInitialized) {
USB_Disable();
USB_Init();
USB_Device_EnableSOFEvents();
}
}
void EVENT_USB_Device_Disconnect(void)
{
print("[D]");
/* For battery powered device */
USB_IsInitialized = false;
/* TODO: This doesn't work. After several plug in/outs can not be enumerated.
if (USB_IsInitialized) {
USB_Disable(); // Disable all interrupts
USB_Controller_Enable();
USB_INT_Enable(USB_INT_VBUSTI);
}
*/
}
2013-03-13 07:01:53 +00:00
void EVENT_USB_Device_Reset(void)
{
print("[R]");
2013-03-13 07:01:53 +00:00
}
void EVENT_USB_Device_Suspend()
{
print("[S]");
#ifdef SLEEP_LED_ENABLE
sleep_led_enable();
#endif
2013-03-13 07:01:53 +00:00
}
void EVENT_USB_Device_WakeUp()
{
print("[W]");
2013-03-26 07:55:45 +00:00
suspend_wakeup_init();
#ifdef SLEEP_LED_ENABLE
sleep_led_disable();
// NOTE: converters may not accept this
led_set(host_keyboard_leds());
#endif
2013-03-13 07:01:53 +00:00
}
2016-11-28 07:31:16 +00:00
#ifdef CONSOLE_ENABLE
static bool console_flush = false;
#define CONSOLE_FLUSH_SET(b) do { \
ATOMIC_BLOCK(ATOMIC_RESTORESTATE) {\
console_flush = b; \
} \
} while (0)
// called every 1ms
void EVENT_USB_Device_StartOfFrame(void)
{
static uint8_t count;
if (++count % 50) return;
count = 0;
if (!console_flush) return;
Console_Task();
console_flush = false;
}
2016-11-28 07:31:16 +00:00
#endif
/** Event handler for the USB_ConfigurationChanged event.
* This is fired when the host sets the current configuration of the USB device after enumeration.
*
* ATMega32u2 supports dual bank(ping-pong mode) only on endpoint 3 and 4,
* it is safe to use singl bank for all endpoints.
*/
void EVENT_USB_Device_ConfigurationChanged(void)
{
bool ConfigSuccess = true;
/* Setup Keyboard HID Report Endpoints */
2013-02-11 13:56:30 +00:00
ConfigSuccess &= ENDPOINT_CONFIG(KEYBOARD_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
KEYBOARD_EPSIZE, ENDPOINT_BANK_SINGLE);
#ifdef MOUSE_ENABLE
/* Setup Mouse HID Report Endpoint */
2013-02-11 13:56:30 +00:00
ConfigSuccess &= ENDPOINT_CONFIG(MOUSE_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
MOUSE_EPSIZE, ENDPOINT_BANK_SINGLE);
#endif
#ifdef EXTRAKEY_ENABLE
/* Setup Extra HID Report Endpoint */
2013-02-11 13:56:30 +00:00
ConfigSuccess &= ENDPOINT_CONFIG(EXTRAKEY_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
EXTRAKEY_EPSIZE, ENDPOINT_BANK_SINGLE);
#endif
2016-11-28 07:31:16 +00:00
#ifdef RAW_ENABLE
/* Setup Raw HID Report Endpoints */
ConfigSuccess &= ENDPOINT_CONFIG(RAW_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
RAW_EPSIZE, ENDPOINT_BANK_SINGLE);
ConfigSuccess &= ENDPOINT_CONFIG(RAW_OUT_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_OUT,
RAW_EPSIZE, ENDPOINT_BANK_SINGLE);
#endif
#ifdef CONSOLE_ENABLE
/* Setup Console HID Report Endpoints */
2013-02-11 13:56:30 +00:00
ConfigSuccess &= ENDPOINT_CONFIG(CONSOLE_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
CONSOLE_EPSIZE, ENDPOINT_BANK_SINGLE);
#if 0
2013-02-11 13:56:30 +00:00
ConfigSuccess &= ENDPOINT_CONFIG(CONSOLE_OUT_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_OUT,
CONSOLE_EPSIZE, ENDPOINT_BANK_SINGLE);
#endif
#endif
2013-07-28 08:34:41 +00:00
#ifdef NKRO_ENABLE
/* Setup NKRO HID Report Endpoints */
ConfigSuccess &= ENDPOINT_CONFIG(NKRO_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
NKRO_EPSIZE, ENDPOINT_BANK_SINGLE);
#endif
2015-08-20 04:42:08 +00:00
2015-08-21 14:46:53 +00:00
#ifdef MIDI_ENABLE
2015-08-24 23:31:12 +00:00
ConfigSuccess &= Endpoint_ConfigureEndpoint(MIDI_STREAM_IN_EPADDR, EP_TYPE_BULK, MIDI_STREAM_EPSIZE, ENDPOINT_BANK_SINGLE);
ConfigSuccess &= Endpoint_ConfigureEndpoint(MIDI_STREAM_OUT_EPADDR, EP_TYPE_BULK, MIDI_STREAM_EPSIZE, ENDPOINT_BANK_SINGLE);
2015-08-21 14:46:53 +00:00
#endif
2016-08-01 05:02:52 +00:00
#ifdef VIRTSER_ENABLE
ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_NOTIFICATION_EPADDR, EP_TYPE_INTERRUPT, CDC_NOTIFICATION_EPSIZE, ENDPOINT_BANK_SINGLE);
ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_OUT_EPADDR, EP_TYPE_BULK, CDC_EPSIZE, ENDPOINT_BANK_SINGLE);
ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_IN_EPADDR, EP_TYPE_BULK, CDC_EPSIZE, ENDPOINT_BANK_SINGLE);
#endif
}
/*
Appendix G: HID Request Support Requirements
The following table enumerates the requests that need to be supported by various types of HID class devices.
Device type GetReport SetReport GetIdle SetIdle GetProtocol SetProtocol
------------------------------------------------------------------------------------------
Boot Mouse Required Optional Optional Optional Required Required
Non-Boot Mouse Required Optional Optional Optional Optional Optional
Boot Keyboard Required Optional Required Required Required Required
Non-Boot Keybrd Required Optional Required Required Optional Optional
Other Device Required Optional Optional Optional Optional Optional
*/
/** Event handler for the USB_ControlRequest event.
* This is fired before passing along unhandled control requests to the library for processing internally.
*/
void EVENT_USB_Device_ControlRequest(void)
{
uint8_t* ReportData = NULL;
uint8_t ReportSize = 0;
/* Handle HID Class specific requests */
switch (USB_ControlRequest.bRequest)
{
case HID_REQ_GetReport:
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
{
Endpoint_ClearSETUP();
// Interface
switch (USB_ControlRequest.wIndex) {
case KEYBOARD_INTERFACE:
// TODO: test/check
ReportData = (uint8_t*)&keyboard_report_sent;
ReportSize = sizeof(keyboard_report_sent);
break;
}
/* Write the report data to the control endpoint */
Endpoint_Write_Control_Stream_LE(ReportData, ReportSize);
Endpoint_ClearOUT();
}
break;
case HID_REQ_SetReport:
if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
{
// Interface
switch (USB_ControlRequest.wIndex) {
case KEYBOARD_INTERFACE:
2014-07-19 15:25:06 +00:00
#ifdef NKRO_ENABLE
case NKRO_INTERFACE:
2014-07-19 15:25:06 +00:00
#endif
2012-06-29 07:48:36 +00:00
Endpoint_ClearSETUP();
while (!(Endpoint_IsOUTReceived())) {
if (USB_DeviceState == DEVICE_STATE_Unattached)
return;
}
keyboard_led_stats = Endpoint_Read_8();
2012-06-29 07:48:36 +00:00
Endpoint_ClearOUT();
Endpoint_ClearStatusStage();
break;
}
2012-06-29 07:48:36 +00:00
}
break;
case HID_REQ_GetProtocol:
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
{
if (USB_ControlRequest.wIndex == KEYBOARD_INTERFACE) {
Endpoint_ClearSETUP();
while (!(Endpoint_IsINReady()));
Endpoint_Write_8(keyboard_protocol);
Endpoint_ClearIN();
Endpoint_ClearStatusStage();
}
2012-06-29 07:48:36 +00:00
}
break;
case HID_REQ_SetProtocol:
if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
{
if (USB_ControlRequest.wIndex == KEYBOARD_INTERFACE) {
Endpoint_ClearSETUP();
Endpoint_ClearStatusStage();
2012-06-29 07:48:36 +00:00
keyboard_protocol = (USB_ControlRequest.wValue & 0xFF);
clear_keyboard();
}
2012-06-29 07:48:36 +00:00
}
break;
case HID_REQ_SetIdle:
if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
{
Endpoint_ClearSETUP();
Endpoint_ClearStatusStage();
keyboard_idle = ((USB_ControlRequest.wValue & 0xFF00) >> 8);
2012-06-29 07:48:36 +00:00
}
break;
case HID_REQ_GetIdle:
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
{
Endpoint_ClearSETUP();
while (!(Endpoint_IsINReady()));
Endpoint_Write_8(keyboard_idle);
2012-06-29 07:48:36 +00:00
Endpoint_ClearIN();
Endpoint_ClearStatusStage();
}
break;
}
2016-08-01 05:02:52 +00:00
#ifdef VIRTSER_ENABLE
CDC_Device_ProcessControlRequest(&cdc_device);
#endif
}
/*******************************************************************************
* Host driver
******************************************************************************/
static uint8_t keyboard_leds(void)
{
return keyboard_led_stats;
}
static void send_keyboard(report_keyboard_t *report)
{
uint8_t timeout = 255;
uint8_t where = where_to_send();
2015-10-26 01:40:56 +00:00
#ifdef BLUETOOTH_ENABLE
if (where == OUTPUT_BLUETOOTH || where == OUTPUT_USB_AND_BT) {
#ifdef MODULE_ADAFRUIT_BLE
adafruit_ble_send_keys(report->mods, report->keys, sizeof(report->keys));
#elif MODULE_RN42
bluefruit_serial_send(0xFD);
bluefruit_serial_send(0x09);
bluefruit_serial_send(0x01);
for (uint8_t i = 0; i < KEYBOARD_EPSIZE; i++) {
bluefruit_serial_send(report->raw[i]);
}
#else
bluefruit_serial_send(0xFD);
for (uint8_t i = 0; i < KEYBOARD_EPSIZE; i++) {
bluefruit_serial_send(report->raw[i]);
}
#endif
}
#endif
if (where != OUTPUT_USB && where != OUTPUT_USB_AND_BT) {
return;
}
/* Select the Keyboard Report Endpoint */
2013-07-28 08:34:41 +00:00
#ifdef NKRO_ENABLE
if (keyboard_protocol && keymap_config.nkro) {
/* Report protocol - NKRO */
2013-07-28 08:34:41 +00:00
Endpoint_SelectEndpoint(NKRO_IN_EPNUM);
/* Check if write ready for a polling interval around 1ms */
while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(4);
if (!Endpoint_IsReadWriteAllowed()) return;
/* Write Keyboard Report Data */
Endpoint_Write_Stream_LE(report, NKRO_EPSIZE, NULL);
2013-07-28 08:34:41 +00:00
}
else
#endif
{
/* Boot protocol */
2013-07-28 08:34:41 +00:00
Endpoint_SelectEndpoint(KEYBOARD_IN_EPNUM);
/* Check if write ready for a polling interval around 10ms */
while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40);
if (!Endpoint_IsReadWriteAllowed()) return;
/* Write Keyboard Report Data */
2013-07-28 08:34:41 +00:00
Endpoint_Write_Stream_LE(report, KEYBOARD_EPSIZE, NULL);
}
/* Finalize the stream transfer to send the last packet */
Endpoint_ClearIN();
keyboard_report_sent = *report;
}
static void send_mouse(report_mouse_t *report)
{
#ifdef MOUSE_ENABLE
uint8_t timeout = 255;
uint8_t where = where_to_send();
2015-10-26 01:40:56 +00:00
#ifdef BLUETOOTH_ENABLE
if (where == OUTPUT_BLUETOOTH || where == OUTPUT_USB_AND_BT) {
#ifdef MODULE_ADAFRUIT_BLE
// FIXME: mouse buttons
adafruit_ble_send_mouse_move(report->x, report->y, report->v, report->h);
#else
bluefruit_serial_send(0xFD);
bluefruit_serial_send(0x00);
bluefruit_serial_send(0x03);
bluefruit_serial_send(report->buttons);
bluefruit_serial_send(report->x);
bluefruit_serial_send(report->y);
bluefruit_serial_send(report->v); // should try sending the wheel v here
bluefruit_serial_send(report->h); // should try sending the wheel h here
bluefruit_serial_send(0x00);
#endif
}
#endif
if (where != OUTPUT_USB && where != OUTPUT_USB_AND_BT) {
return;
}
/* Select the Mouse Report Endpoint */
Endpoint_SelectEndpoint(MOUSE_IN_EPNUM);
/* Check if write ready for a polling interval around 10ms */
while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40);
if (!Endpoint_IsReadWriteAllowed()) return;
/* Write Mouse Report Data */
Endpoint_Write_Stream_LE(report, sizeof(report_mouse_t), NULL);
/* Finalize the stream transfer to send the last packet */
Endpoint_ClearIN();
#endif
}
static void send_system(uint16_t data)
{
uint8_t timeout = 255;
if (USB_DeviceState != DEVICE_STATE_Configured)
return;
2012-06-29 07:48:36 +00:00
report_extra_t r = {
.report_id = REPORT_ID_SYSTEM,
2016-12-19 15:46:50 +00:00
.usage = data - SYSTEM_POWER_DOWN + 1
2012-06-29 07:48:36 +00:00
};
Endpoint_SelectEndpoint(EXTRAKEY_IN_EPNUM);
/* Check if write ready for a polling interval around 10ms */
while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40);
if (!Endpoint_IsReadWriteAllowed()) return;
Endpoint_Write_Stream_LE(&r, sizeof(report_extra_t), NULL);
Endpoint_ClearIN();
}
static void send_consumer(uint16_t data)
{
uint8_t timeout = 255;
uint8_t where = where_to_send();
2015-10-26 01:40:56 +00:00
#ifdef BLUETOOTH_ENABLE
if (where == OUTPUT_BLUETOOTH || where == OUTPUT_USB_AND_BT) {
#ifdef MODULE_ADAFRUIT_BLE
adafruit_ble_send_consumer_key(data, 0);
#elif MODULE_RN42
static uint16_t last_data = 0;
if (data == last_data) return;
last_data = data;
uint16_t bitmap = CONSUMER2RN42(data);
bluefruit_serial_send(0xFD);
bluefruit_serial_send(0x03);
bluefruit_serial_send(0x03);
bluefruit_serial_send(bitmap&0xFF);
bluefruit_serial_send((bitmap>>8)&0xFF);
#else
static uint16_t last_data = 0;
if (data == last_data) return;
last_data = data;
uint16_t bitmap = CONSUMER2BLUEFRUIT(data);
bluefruit_serial_send(0xFD);
bluefruit_serial_send(0x00);
bluefruit_serial_send(0x02);
bluefruit_serial_send((bitmap>>8)&0xFF);
bluefruit_serial_send(bitmap&0xFF);
bluefruit_serial_send(0x00);
bluefruit_serial_send(0x00);
bluefruit_serial_send(0x00);
bluefruit_serial_send(0x00);
#endif
}
#endif
if (where != OUTPUT_USB && where != OUTPUT_USB_AND_BT) {
return;
}
2012-06-29 07:48:36 +00:00
report_extra_t r = {
.report_id = REPORT_ID_CONSUMER,
.usage = data
};
Endpoint_SelectEndpoint(EXTRAKEY_IN_EPNUM);
/* Check if write ready for a polling interval around 10ms */
while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40);
if (!Endpoint_IsReadWriteAllowed()) return;
Endpoint_Write_Stream_LE(&r, sizeof(report_extra_t), NULL);
Endpoint_ClearIN();
}
/*******************************************************************************
* sendchar
******************************************************************************/
#ifdef CONSOLE_ENABLE
#define SEND_TIMEOUT 5
int8_t sendchar(uint8_t c)
{
// Not wait once timeouted.
// Because sendchar() is called so many times, waiting each call causes big lag.
static bool timeouted = false;
// prevents Console_Task() from running during sendchar() runs.
// or char will be lost. These two function is mutually exclusive.
CONSOLE_FLUSH_SET(false);
if (USB_DeviceState != DEVICE_STATE_Configured)
return -1;
uint8_t ep = Endpoint_GetCurrentEndpoint();
Endpoint_SelectEndpoint(CONSOLE_IN_EPNUM);
if (!Endpoint_IsEnabled() || !Endpoint_IsConfigured()) {
goto ERROR_EXIT;
}
if (timeouted && !Endpoint_IsReadWriteAllowed()) {
goto ERROR_EXIT;
}
timeouted = false;
uint8_t timeout = SEND_TIMEOUT;
while (!Endpoint_IsReadWriteAllowed()) {
if (USB_DeviceState != DEVICE_STATE_Configured) {
goto ERROR_EXIT;
}
if (Endpoint_IsStalled()) {
goto ERROR_EXIT;
}
if (!(timeout--)) {
timeouted = true;
goto ERROR_EXIT;
}
_delay_ms(1);
}
Endpoint_Write_8(c);
// send when bank is full
if (!Endpoint_IsReadWriteAllowed()) {
while (!(Endpoint_IsINReady()));
Endpoint_ClearIN();
} else {
CONSOLE_FLUSH_SET(true);
}
Endpoint_SelectEndpoint(ep);
return 0;
ERROR_EXIT:
Endpoint_SelectEndpoint(ep);
return -1;
}
#else
int8_t sendchar(uint8_t c)
{
return 0;
}
#endif
2015-10-27 16:42:30 +00:00
/*******************************************************************************
* MIDI
******************************************************************************/
2015-08-20 04:42:08 +00:00
2015-08-21 14:46:53 +00:00
#ifdef MIDI_ENABLE
2016-11-22 00:50:55 +00:00
static void usb_send_func(MidiDevice * device, uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2) {
2015-08-20 04:42:08 +00:00
MIDI_EventPacket_t event;
event.Data1 = byte0;
event.Data2 = byte1;
event.Data3 = byte2;
2015-08-21 14:46:53 +00:00
uint8_t cable = 0;
2015-08-22 03:13:33 +00:00
// Endpoint_SelectEndpoint(MIDI_STREAM_IN_EPNUM);
2015-08-21 14:46:53 +00:00
2015-08-20 04:42:08 +00:00
//if the length is undefined we assume it is a SYSEX message
if (midi_packet_length(byte0) == UNDEFINED) {
switch(cnt) {
case 3:
if (byte2 == SYSEX_END)
2015-08-21 14:46:53 +00:00
event.Event = MIDI_EVENT(cable, SYSEX_ENDS_IN_3);
2015-08-20 04:42:08 +00:00
else
2015-08-21 14:46:53 +00:00
event.Event = MIDI_EVENT(cable, SYSEX_START_OR_CONT);
2015-08-20 04:42:08 +00:00
break;
case 2:
if (byte1 == SYSEX_END)
2015-08-21 14:46:53 +00:00
event.Event = MIDI_EVENT(cable, SYSEX_ENDS_IN_2);
2015-08-20 04:42:08 +00:00
else
2015-08-21 14:46:53 +00:00
event.Event = MIDI_EVENT(cable, SYSEX_START_OR_CONT);
2015-08-20 04:42:08 +00:00
break;
case 1:
if (byte0 == SYSEX_END)
2015-08-21 14:46:53 +00:00
event.Event = MIDI_EVENT(cable, SYSEX_ENDS_IN_1);
2015-08-20 04:42:08 +00:00
else
2015-08-21 14:46:53 +00:00
event.Event = MIDI_EVENT(cable, SYSEX_START_OR_CONT);
2015-08-20 04:42:08 +00:00
break;
default:
return; //invalid cnt
}
} else {
//deal with 'system common' messages
//TODO are there any more?
switch(byte0 & 0xF0){
case MIDI_SONGPOSITION:
2015-08-21 14:46:53 +00:00
event.Event = MIDI_EVENT(cable, SYS_COMMON_3);
2015-08-20 04:42:08 +00:00
break;
case MIDI_SONGSELECT:
case MIDI_TC_QUARTERFRAME:
2015-08-21 14:46:53 +00:00
event.Event = MIDI_EVENT(cable, SYS_COMMON_2);
2015-08-20 04:42:08 +00:00
break;
default:
2015-08-21 14:46:53 +00:00
event.Event = MIDI_EVENT(cable, byte0);
2015-08-20 04:42:08 +00:00
break;
}
}
2015-08-22 03:13:33 +00:00
// Endpoint_Write_Stream_LE(&event, sizeof(event), NULL);
// Endpoint_ClearIN();
2015-08-21 14:46:53 +00:00
2015-08-20 04:42:08 +00:00
MIDI_Device_SendEventPacket(&USB_MIDI_Interface, &event);
MIDI_Device_Flush(&USB_MIDI_Interface);
MIDI_Device_USBTask(&USB_MIDI_Interface);
USB_USBTask();
}
2016-11-22 00:50:55 +00:00
static void usb_get_midi(MidiDevice * device) {
2015-08-20 04:42:08 +00:00
MIDI_EventPacket_t event;
while (MIDI_Device_ReceiveEventPacket(&USB_MIDI_Interface, &event)) {
midi_packet_length_t length = midi_packet_length(event.Data1);
uint8_t input[3];
input[0] = event.Data1;
input[1] = event.Data2;
input[2] = event.Data3;
if (length == UNDEFINED) {
//sysex
if (event.Event == MIDI_EVENT(0, SYSEX_START_OR_CONT) || event.Event == MIDI_EVENT(0, SYSEX_ENDS_IN_3)) {
length = 3;
} else if (event.Event == MIDI_EVENT(0, SYSEX_ENDS_IN_2)) {
length = 2;
} else if(event.Event == MIDI_EVENT(0, SYSEX_ENDS_IN_1)) {
length = 1;
} else {
//XXX what to do?
}
}
//pass the data to the device input function
if (length != UNDEFINED)
midi_device_input(device, length, input);
}
MIDI_Device_USBTask(&USB_MIDI_Interface);
USB_USBTask();
}
2016-11-22 00:50:55 +00:00
static void midi_usb_init(MidiDevice * device){
2015-08-20 04:42:08 +00:00
midi_device_init(device);
midi_device_set_send_func(device, usb_send_func);
midi_device_set_pre_input_process_func(device, usb_get_midi);
2016-11-22 00:50:55 +00:00
// SetupHardware();
2015-08-20 04:42:08 +00:00
sei();
}
2015-08-24 23:31:12 +00:00
void MIDI_Task(void)
{
/* Device must be connected and configured for the task to run */
dprint("in MIDI_TASK\n");
if (USB_DeviceState != DEVICE_STATE_Configured)
return;
dprint("continuing in MIDI_TASK\n");
Endpoint_SelectEndpoint(MIDI_STREAM_IN_EPADDR);
if (Endpoint_IsINReady())
{
dprint("Endpoint is ready\n");
uint8_t MIDICommand = 0;
uint8_t MIDIPitch;
/* Get board button status - if pressed use channel 10 (percussion), otherwise use channel 1 */
uint8_t Channel = MIDI_CHANNEL(1);
MIDICommand = MIDI_COMMAND_NOTE_ON;
MIDIPitch = 0x3E;
/* Check if a MIDI command is to be sent */
if (MIDICommand)
{
dprint("Command exists\n");
MIDI_EventPacket_t MIDIEvent = (MIDI_EventPacket_t)
{
.Event = MIDI_EVENT(0, MIDICommand),
.Data1 = MIDICommand | Channel,
.Data2 = MIDIPitch,
.Data3 = MIDI_STANDARD_VELOCITY,
};
/* Write the MIDI event packet to the endpoint */
Endpoint_Write_Stream_LE(&MIDIEvent, sizeof(MIDIEvent), NULL);
/* Send the data in the endpoint to the host */
Endpoint_ClearIN();
}
}
/* Select the MIDI OUT stream */
Endpoint_SelectEndpoint(MIDI_STREAM_OUT_EPADDR);
/* Check if a MIDI command has been received */
if (Endpoint_IsOUTReceived())
{
MIDI_EventPacket_t MIDIEvent;
/* Read the MIDI event packet from the endpoint */
Endpoint_Read_Stream_LE(&MIDIEvent, sizeof(MIDIEvent), NULL);
/* If the endpoint is now empty, clear the bank */
if (!(Endpoint_BytesInEndpoint()))
{
/* Clear the endpoint ready for new packet */
Endpoint_ClearOUT();
}
}
}
2015-08-21 14:46:53 +00:00
#endif
2015-08-20 04:42:08 +00:00
2016-08-01 05:02:52 +00:00
/*******************************************************************************
* VIRTUAL SERIAL
******************************************************************************/
#ifdef VIRTSER_ENABLE
void virtser_init(void)
{
cdc_device.State.ControlLineStates.DeviceToHost = CDC_CONTROL_LINE_IN_DSR ;
CDC_Device_SendControlLineStateChange(&cdc_device);
}
2016-08-23 07:02:44 +00:00
void virtser_recv(uint8_t c) __attribute__ ((weak));
2016-08-01 05:02:52 +00:00
void virtser_recv(uint8_t c)
{
// Ignore by default
}
void virtser_task(void)
{
uint16_t count = CDC_Device_BytesReceived(&cdc_device);
uint8_t ch;
if (count)
{
ch = CDC_Device_ReceiveByte(&cdc_device);
virtser_recv(ch);
}
}
void virtser_send(const uint8_t byte)
{
uint8_t timeout = 255;
uint8_t ep = Endpoint_GetCurrentEndpoint();
if (cdc_device.State.ControlLineStates.HostToDevice & CDC_CONTROL_LINE_OUT_DTR)
{
/* IN packet */
Endpoint_SelectEndpoint(cdc_device.Config.DataINEndpoint.Address);
if (!Endpoint_IsEnabled() || !Endpoint_IsConfigured()) {
Endpoint_SelectEndpoint(ep);
return;
}
while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40);
Endpoint_Write_8(byte);
CDC_Device_Flush(&cdc_device);
if (Endpoint_IsINReady()) {
Endpoint_ClearIN();
}
Endpoint_SelectEndpoint(ep);
}
}
#endif
2015-08-20 04:42:08 +00:00
/*******************************************************************************
* main
******************************************************************************/
static void setup_mcu(void)
{
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
Makefile redo & other features (#395) * .build containment implemented * no destructive variable setting - builds in either folder * make from 3 places * cleans before each build * make from root with keyboard=keyboard, keymap=keymap * make from keyboard/keyboard with keymap=keymap * make from keymaps/keymap * only implemented on planck * adds color diag to avr-gcc * makefiles for all plancks, clean-up * quick build-all makefile for plancks * reformatting of make output (colors) * color toggle, tmk path corrections * correct if statement for color * move config.h to main makefile, updates preonic, atomic * format update, all keyboards targets * makefile optional for build all target, alps and arrow_pad updated * alps updated * make planck default, trying out travis recipe for all-keyboards * all-keymaps target, different travis recipe * updates alps64 * updates keyboards to new format * updates clue* projects * all projects updated, specialise EZ .hex, let .hex through * updates travis * automatically find root, keyboard, keymap * silent echo, cleaned-up mass make output * updates all keyboards' .hex files except EZ * Rename Bantam44.c to bantam44.c * Rename Bantam44.h to bantam44.h * nananana * adds six key keyboard * does same to ez as rest * updates send_string example * brings ergodox_ez up to date * updates template/new project script * adds sixkeyboard * adds readme for sixkeyboard * adds sixkeyboard to travis * filenames, gitignore mess * define clock prescaler stuff manually * make quick, size test example * documentation and dfu-no-build
2016-06-11 17:31:31 +00:00
// clock_prescale_set(clock_div_1);
CLKPR = (1 << CLKPCE);
CLKPR = (0 << CLKPS3) | (0 << CLKPS2) | (0 << CLKPS1) | (0 << CLKPS0);
}
static void setup_usb(void)
{
// Leonardo needs. Without this USB device is not recognized.
USB_Disable();
USB_Init();
// for Console_Task
USB_Device_EnableSOFEvents();
print_set_sendchar(sendchar);
}
2015-10-27 16:42:30 +00:00
2015-08-21 14:46:53 +00:00
#ifdef MIDI_ENABLE
2015-08-20 04:42:08 +00:00
void fallthrough_callback(MidiDevice * device,
uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2);
void cc_callback(MidiDevice * device,
uint8_t chan, uint8_t num, uint8_t val);
void sysex_callback(MidiDevice * device,
uint16_t start, uint8_t length, uint8_t * data);
void setup_midi(void)
{
#ifdef MIDI_ADVANCED
midi_init();
#endif
midi_device_init(&midi_device);
midi_device_set_send_func(&midi_device, usb_send_func);
midi_device_set_pre_input_process_func(&midi_device, usb_get_midi);
}
2015-08-21 14:46:53 +00:00
#endif
2015-08-20 04:42:08 +00:00
int main(void) __attribute__ ((weak));
int main(void)
{
2015-08-21 14:46:53 +00:00
#ifdef MIDI_ENABLE
setup_midi();
2015-08-21 14:46:53 +00:00
#endif
2015-08-20 04:42:08 +00:00
setup_mcu();
keyboard_setup();
setup_usb();
sei();
2015-08-21 14:46:53 +00:00
#ifdef MIDI_ENABLE
2015-08-20 04:42:08 +00:00
midi_register_fallthrough_callback(&midi_device, fallthrough_callback);
midi_register_cc_callback(&midi_device, cc_callback);
midi_register_sysex_callback(&midi_device, sysex_callback);
// init_notes();
2015-08-24 23:31:12 +00:00
// midi_send_cc(&midi_device, 0, 1, 2);
// midi_send_cc(&midi_device, 15, 1, 0);
// midi_send_noteon(&midi_device, 0, 64, 127);
// midi_send_noteoff(&midi_device, 0, 64, 127);
2015-08-21 14:46:53 +00:00
#endif
#if defined(MODULE_ADAFRUIT_EZKEY) || defined(MODULE_RN42)
serial_init();
#endif
/* wait for USB startup & debug output */
2015-10-27 16:42:30 +00:00
#ifdef WAIT_FOR_USB
while (USB_DeviceState != DEVICE_STATE_Configured) {
2015-10-27 16:42:30 +00:00
#if defined(INTERRUPT_CONTROL_ENDPOINT)
;
#else
USB_USBTask();
#endif
}
print("USB configured.\n");
2015-10-27 16:42:30 +00:00
#else
USB_USBTask();
#endif
/* init modules */
2012-10-26 18:07:37 +00:00
keyboard_init();
host_set_driver(&lufa_driver);
#ifdef SLEEP_LED_ENABLE
sleep_led_init();
#endif
2016-08-01 05:02:52 +00:00
#ifdef VIRTSER_ENABLE
virtser_init();
#endif
print("Keyboard start.\n");
while (1) {
#if !defined(BLUETOOTH_ENABLE)
2015-10-26 18:49:46 +00:00
while (USB_DeviceState == DEVICE_STATE_Suspended) {
print("[s]");
suspend_power_down();
if (USB_Device_RemoteWakeupEnabled && suspend_wakeup_condition()) {
USB_Device_SendRemoteWakeup();
}
}
2015-10-27 16:42:30 +00:00
#endif
2013-03-13 07:01:53 +00:00
2016-11-15 18:18:10 +00:00
keyboard_task();
2015-08-21 14:46:53 +00:00
#ifdef MIDI_ENABLE
2015-08-20 04:42:08 +00:00
midi_device_process(&midi_device);
#ifdef MIDI_ADVANCED
2017-02-18 13:32:55 +00:00
midi_task();
2015-08-21 14:46:53 +00:00
#endif
#endif
2016-11-24 02:28:12 +00:00
#if defined(RGBLIGHT_ANIMATIONS) & defined(RGBLIGHT_ENABLE)
2016-11-14 04:02:38 +00:00
rgblight_task();
#endif
#ifdef MODULE_ADAFRUIT_BLE
adafruit_ble_task();
#endif
2016-08-01 05:02:52 +00:00
#ifdef VIRTSER_ENABLE
virtser_task();
CDC_Device_USBTask(&cdc_device);
#endif
2016-11-28 07:31:16 +00:00
#ifdef RAW_ENABLE
raw_hid_task();
#endif
#if !defined(INTERRUPT_CONTROL_ENDPOINT)
USB_USBTask();
#endif
2016-11-28 07:31:16 +00:00
}
}
2015-08-20 04:42:08 +00:00
2015-08-21 14:46:53 +00:00
#ifdef MIDI_ENABLE
2015-08-20 04:42:08 +00:00
void fallthrough_callback(MidiDevice * device,
uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2){
2016-01-20 05:06:52 +00:00
#ifdef AUDIO_ENABLE
2015-08-29 15:54:38 +00:00
if (cnt == 3) {
switch (byte0 & 0xF0) {
case MIDI_NOTEON:
play_note(((double)261.6)*pow(2.0, -4.0)*pow(2.0,(byte1 & 0x7F)/12.0), (byte2 & 0x7F) / 8);
2015-08-29 15:54:38 +00:00
break;
case MIDI_NOTEOFF:
stop_note(((double)261.6)*pow(2.0, -4.0)*pow(2.0,(byte1 & 0x7F)/12.0));
2015-08-29 15:54:38 +00:00
break;
}
}
if (byte0 == MIDI_STOP) {
stop_all_notes();
}
2016-01-20 05:06:52 +00:00
#endif
2015-08-20 04:42:08 +00:00
}
2016-11-14 04:02:38 +00:00
2015-08-20 04:42:08 +00:00
void cc_callback(MidiDevice * device,
uint8_t chan, uint8_t num, uint8_t val) {
//sending it back on the next channel
2016-11-14 04:02:38 +00:00
// midi_send_cc(device, (chan + 1) % 16, num, val);
2015-08-20 04:42:08 +00:00
}
#ifdef API_SYSEX_ENABLE
2016-11-21 17:54:06 +00:00
uint8_t midi_buffer[MIDI_SYSEX_BUFFER] = {0};
#endif
2016-11-17 22:42:14 +00:00
2016-11-21 17:54:06 +00:00
void sysex_callback(MidiDevice * device, uint16_t start, uint8_t length, uint8_t * data) {
2016-11-26 20:37:46 +00:00
#ifdef API_SYSEX_ENABLE
2016-11-17 22:42:14 +00:00
// SEND_STRING("\n");
// send_word(start);
// SEND_STRING(": ");
// Don't store the header
int16_t pos = start - 4;
2016-11-17 22:42:14 +00:00
for (uint8_t place = 0; place < length; place++) {
// send_byte(*data);
if (pos >= 0) {
if (*data == 0xF7) {
// SEND_STRING("\nRD: ");
// for (uint8_t i = 0; i < start + place + 1; i++){
// send_byte(midi_buffer[i]);
// SEND_STRING(" ");
// }
const unsigned decoded_length = sysex_decoded_length(pos);
uint8_t decoded[API_SYSEX_MAX_SIZE];
sysex_decode(decoded, midi_buffer, pos);
process_api(decoded_length, decoded);
return;
}
else if (pos >= MIDI_SYSEX_BUFFER) {
return;
}
midi_buffer[pos] = *data;
2016-11-23 05:30:06 +00:00
}
2016-11-17 22:42:14 +00:00
// SEND_STRING(" ");
data++;
pos++;
2016-11-17 22:42:14 +00:00
}
2016-11-26 20:37:46 +00:00
#endif
2016-11-23 05:30:06 +00:00
}
2016-11-17 22:42:14 +00:00
2015-08-21 14:46:53 +00:00
#endif