1
0
Fork 0
qmk_firmware/keyboards/atomic/atomic.c

325 lines
7.5 KiB
C
Raw Normal View History

2015-10-30 04:49:11 +00:00
#include "atomic.h"
__attribute__ ((weak))
void matrix_init_user(void) {
// leave this function blank - it can be defined in a keymap file
2016-04-18 01:14:37 +00:00
};
2015-10-30 04:49:11 +00:00
__attribute__ ((weak))
void matrix_scan_user(void) {
// leave this function blank - it can be defined in a keymap file
2016-04-18 01:14:37 +00:00
}
__attribute__ ((weak))
bool process_action_user(keyrecord_t *record) {
// leave this function blank - it can be defined in a keymap file
return true;
2016-04-18 01:14:37 +00:00
}
__attribute__ ((weak))
void led_set_user(uint8_t usb_led) {
// leave this function blank - it can be defined in a keymap file
}
2015-10-30 04:49:11 +00:00
void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
2015-10-30 04:49:11 +00:00
MCUCR |= (1<<JTD);
MCUCR |= (1<<JTD);
#ifdef BACKLIGHT_ENABLE
backlight_init_ports();
#endif
// Turn status LED on
DDRE |= (1<<6);
PORTE |= (1<<6);
matrix_init_user();
}
2015-10-30 04:49:11 +00:00
void matrix_scan_kb(void) {
// put your looping keyboard code here
// runs every cycle (a lot)
2015-10-30 04:49:11 +00:00
matrix_scan_user();
2016-04-18 01:14:37 +00:00
}
bool process_action_kb(keyrecord_t *record) {
// put your per-action keyboard code here
// runs for every action, just before processing by the firmware
2016-04-18 01:14:37 +00:00
return process_action_user(record);
2016-04-18 01:14:37 +00:00
}
void led_set_kb(uint8_t usb_led) {
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
2016-04-18 01:14:37 +00:00
led_set_user(usb_led);
2016-04-18 01:14:37 +00:00
}
#ifdef BACKLIGHT_ENABLE
#define CHANNEL OCR1C
#define BREATHING_NO_HALT 0
#define BREATHING_HALT_OFF 1
#define BREATHING_HALT_ON 2
static uint8_t breath_intensity;
static uint8_t breath_speed;
static uint16_t breathing_index;
static uint8_t breathing_halt;
void backlight_init_ports()
{
// Setup PB7 as output and output low.
DDRB |= (1<<7);
PORTB &= ~(1<<7);
// Use full 16-bit resolution.
ICR1 = 0xFFFF;
// I could write a wall of text here to explain... but TL;DW
// Go read the ATmega32u4 datasheet.
// And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on
// Pin PB7 = OCR1C (Timer 1, Channel C)
// Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0
// (i.e. start high, go low when counter matches.)
// WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0
// Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1
TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010;
TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
backlight_init();
breathing_defaults();
}
void backlight_set(uint8_t level)
{
// Prevent backlight blink on lowest level
PORTB &= ~(_BV(PORTB7));
if ( level == 0 )
{
// Turn off PWM control on PB7, revert to output low.
TCCR1A &= ~(_BV(COM1C1));
// Set the brightness to 0
CHANNEL = 0x0;
}
else if ( level >= BACKLIGHT_LEVELS )
{
// Turn on PWM control of PB7
TCCR1A |= _BV(COM1C1);
// Set the brightness to max
CHANNEL = 0xFFFF;
}
else
{
// Turn on PWM control of PB7
TCCR1A |= _BV(COM1C1);
// Set the brightness
CHANNEL = 0xFFFF >> ((BACKLIGHT_LEVELS - level) * ((BACKLIGHT_LEVELS + 1) / 2));
}
breathing_intensity_default();
}
void breathing_enable(void)
{
if (get_backlight_level() == 0)
{
breathing_index = 0;
}
else
{
// Set breathing_index to be at the midpoint (brightest point)
breathing_index = 0x20 << breath_speed;
}
breathing_halt = BREATHING_NO_HALT;
// Enable breathing interrupt
TIMSK1 |= _BV(OCIE1A);
}
void breathing_pulse(void)
{
if (get_backlight_level() == 0)
{
breathing_index = 0;
}
else
{
// Set breathing_index to be at the midpoint + 1 (brightest point)
breathing_index = 0x21 << breath_speed;
}
breathing_halt = BREATHING_HALT_ON;
// Enable breathing interrupt
TIMSK1 |= _BV(OCIE1A);
}
void breathing_disable(void)
{
// Disable breathing interrupt
TIMSK1 &= ~_BV(OCIE1A);
backlight_set(get_backlight_level());
}
void breathing_self_disable(void)
{
if (get_backlight_level() == 0)
{
breathing_halt = BREATHING_HALT_OFF;
}
else
{
breathing_halt = BREATHING_HALT_ON;
}
//backlight_set(get_backlight_level());
}
void breathing_toggle(void)
{
if (!is_breathing())
{
if (get_backlight_level() == 0)
{
breathing_index = 0;
}
else
{
// Set breathing_index to be at the midpoint + 1 (brightest point)
breathing_index = 0x21 << breath_speed;
}
breathing_halt = BREATHING_NO_HALT;
}
// Toggle breathing interrupt
TIMSK1 ^= _BV(OCIE1A);
// Restore backlight level
if (!is_breathing())
{
backlight_set(get_backlight_level());
}
}
bool is_breathing(void)
{
return (TIMSK1 && _BV(OCIE1A));
}
void breathing_intensity_default(void)
{
//breath_intensity = (uint8_t)((uint16_t)100 * (uint16_t)get_backlight_level() / (uint16_t)BACKLIGHT_LEVELS);
breath_intensity = ((BACKLIGHT_LEVELS - get_backlight_level()) * ((BACKLIGHT_LEVELS + 1) / 2));
}
void breathing_intensity_set(uint8_t value)
{
breath_intensity = value;
}
void breathing_speed_default(void)
{
breath_speed = 4;
}
void breathing_speed_set(uint8_t value)
{
bool is_breathing_now = is_breathing();
uint8_t old_breath_speed = breath_speed;
if (is_breathing_now)
{
// Disable breathing interrupt
TIMSK1 &= ~_BV(OCIE1A);
}
breath_speed = value;
if (is_breathing_now)
{
// Adjust index to account for new speed
breathing_index = (( (uint8_t)( (breathing_index) >> old_breath_speed ) ) & 0x3F) << breath_speed;
// Enable breathing interrupt
TIMSK1 |= _BV(OCIE1A);
}
}
void breathing_speed_inc(uint8_t value)
{
if ((uint16_t)(breath_speed - value) > 10 )
{
breathing_speed_set(0);
}
else
{
breathing_speed_set(breath_speed - value);
}
}
void breathing_speed_dec(uint8_t value)
{
if ((uint16_t)(breath_speed + value) > 10 )
{
breathing_speed_set(10);
}
else
{
breathing_speed_set(breath_speed + value);
}
}
void breathing_defaults(void)
{
breathing_intensity_default();
breathing_speed_default();
breathing_halt = BREATHING_NO_HALT;
}
/* Breathing Sleep LED brighness(PWM On period) table
* (64[steps] * 4[duration]) / 64[PWM periods/s] = 4 second breath cycle
*
* http://www.wolframalpha.com/input/?i=%28sin%28+x%2F64*pi%29**8+*+255%2C+x%3D0+to+63
* (0..63).each {|x| p ((sin(x/64.0*PI)**8)*255).to_i }
*/
static const uint8_t breathing_table[64] PROGMEM = {
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 4, 6, 10,
15, 23, 32, 44, 58, 74, 93, 113, 135, 157, 179, 199, 218, 233, 245, 252,
255, 252, 245, 233, 218, 199, 179, 157, 135, 113, 93, 74, 58, 44, 32, 23,
15, 10, 6, 4, 2, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
};
ISR(TIMER1_COMPA_vect)
{
// CHANNEL = (pgm_read_byte(&breathing_table[ ( (uint8_t)( (breathing_index++) >> breath_speed ) ) & 0x3F ] )) * breath_intensity;
uint8_t local_index = ( (uint8_t)( (breathing_index++) >> breath_speed ) ) & 0x3F;
if (((breathing_halt == BREATHING_HALT_ON) && (local_index == 0x20)) || ((breathing_halt == BREATHING_HALT_OFF) && (local_index == 0x3F)))
{
// Disable breathing interrupt
TIMSK1 &= ~_BV(OCIE1A);
}
CHANNEL = (uint16_t)(((uint16_t)pgm_read_byte(&breathing_table[local_index]) * 257)) >> breath_intensity;
}
#endif