qmk_firmware/keyboards/crkbd/keymaps/kidbrazil/config.h

/*
This is the c configuration file for the keymap

Copyright 2012 Jun Wako <wakojun@gmail.com>
Copyright 2015 Jack Humbert
Copyright 2019 Lucas Moreira

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

#pragma once

//#define USE_MATRIX_I2C

/* Select hand configuration */

#define MASTER_LEFT
// #define MASTER_RIGHT
// #define EE_HANDS

#define SSD1306OLED
#define USE_SSD_I2C

#define USE_SERIAL_PD2

#define TAPPING_FORCE_HOLD
#define TAPPING_TERM 150
#undef PRODUCT
#define PRODUCT         CRKBD Loose Transistor Ed.

#ifdef RGBLIGHT_ENABLE
    //#undef RGBLED_NUM
    //#define RGBLIGHT_ANIMATIONS
    #define RGBLIGHT_EFFECT_BREATHING
    #define RGBLIGHT_EFFECT_RAINBOW_MOOD
    #define RGBLIGHT_EFFECT_KNIGHT
    //#define RGBLED_NUM 27
    #define RGBLIGHT_LIMIT_VAL 120
    #define RGBLIGHT_HUE_STEP 10
    #define RGBLIGHT_SAT_STEP 17
    #define RGBLIGHT_VAL_STEP 17
#endif

#ifdef RGB_MATRIX_ENABLE
    //#   define RGB_MATRIX_KEYPRESSES // reacts to keypresses
    // #   define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
    // #   define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
    #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
    #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
    // #   define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
    // #   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
    #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
    #define RGB_MATRIX_HUE_STEP 4
    #define RGB_MATRIX_SAT_STEP 4
    #define RGB_MATRIX_VAL_STEP 4
    #define RGB_MATRIX_SPD_STEP 10

    /* Disable the animations you don&#39;t want/need.  You will need to disable a good number of these    *
     * because they take up a lot of space.  Disable until you can successfully compile your firmware. */
    #define DISABLE_RGB_MATRIX_ALPHAS_MODS
    #define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
    #define DISABLE_RGB_MATRIX_BREATHING
    #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
    #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
    #define DISABLE_RGB_MATRIX_BAND_SAT
    #define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT
    #define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL
    #define DISABLE_RGB_MATRIX_BAND_VAL
    #define DISABLE_RGB_MATRIX_CYCLE_ALL
    #define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
    #define DISABLE_RGB_MATRIX_CYCLE_OUT_IN
    #define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
    #define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL
    #define DISABLE_RGB_MATRIX_CYCLE_SPIRAL
    #define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN
    #define DISABLE_RGB_MATRIX_DUAL_BEACON
    #define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
    #define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
    #define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS
    #define DISABLE_RGB_MATRIX_SOLID_REACTIVE
    #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
    #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
    #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
    #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
    #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
    #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
    #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
    #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
    #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
    #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
    #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
    #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
    #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
    #define DISABLE_RGB_MATRIX_SOLID_SPLASH
    #define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
    #define DISABLE_RGB_MATRIX_SOLID_SPLASH
    #define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
    #define DISABLE_RGB_MATRIX_SPLASH
    #define DISABLE_RGB_MATRIX_MULTISPLASH
    #define DISABLE_RGB_MATRIX_SPLASH
    #define DISABLE_RGB_MATRIX_MULTISPLASH
#endif
// Custom Font path
#define OLED_FONT_H "keyboards/crkbd/keymaps/kidbrazil/glcdfont.c"
#define OLED_DISABLE_TIMEOUT