qmk_firmware/keyboards/preonic/rev3/config.h

/*
 * Copyright 2018 Jack Humbert <jack.humb@gmail.com>
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

#ifndef REV3_CONFIG_H
#define REV3_CONFIG_H

/* USB Device descriptor parameter */
#define DEVICE_VER 0x0003

#undef MATRIX_ROWS
#undef MATRIX_COLS
/* key matrix size */
#define MATRIX_ROWS 10
#define MATRIX_COLS 6

#undef MATRIX_ROW_PINS
#undef MATRIX_COL_PINS
#define MATRIX_ROW_PINS { A10, A9, A8, B15, C13, C14, C15, A2, A3, A6 }
#define MATRIX_COL_PINS { B11, B10, B2, B1, A7, B0 }
#define UNUSED_PINS

#define ENCODERS_PAD_A { B12 }
#define ENCODERS_PAD_B { B13 }

#define DIP_SWITCH_PINS { B14, A15, A0, B9 }

#define MUSIC_MAP
#undef AUDIO_VOICES
#undef C6_AUDIO

/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
// #define DEBOUNCE 6

/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
//#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
//#define LOCKING_RESYNC_ENABLE

/*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
//#define FORCE_NKRO

/*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
 */

/* disable debug print */
//#define NO_DEBUG

/* disable print */
//#define NO_PRINT

/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION

/*
 * MIDI options
 */

/* Prevent use of disabled MIDI features in the keymap */
//#define MIDI_ENABLE_STRICT 1

/* enable basic MIDI features:
   - MIDI notes can be sent when in Music mode is on
*/
//#define MIDI_BASIC

/* enable advanced MIDI features:
   - MIDI notes can be added to the keymap
   - Octave shift and transpose
   - Virtual sustain, portamento, and modulation wheel
   - etc.
*/
//#define MIDI_ADVANCED

/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1

#define WS2812_LED_N 2
#define RGBLED_NUM WS2812_LED_N
#define WS2812_TIM_N 2
#define WS2812_TIM_CH 2
#define PORT_WS2812     GPIOA
#define PIN_WS2812      1
#define WS2812_DMA_STREAM STM32_DMA1_STREAM2  // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection)
//#define WS2812_DMA_CHANNEL 7                  // DMA channel for TIMx_UP
//#define WS2812_EXTERNAL_PULLUP

#endif