Add a warning about USBtinyISP limitations to the ISP flashing guide (#15898)
This commit is contained in:
parent
b20bbc7152
commit
03b1d9ef1f
1 changed files with 22 additions and 2 deletions
|
@ -57,13 +57,33 @@ To use a Teensy 2.0 as an ISP flashing tool, you will first need to load a [spec
|
|||
|
||||
!> Note that the `B0` pin on the Teensy should be wired to the `RESET` pin on the keyboard's controller. ***DO NOT*** connect the `RESET` pin on the Teensy to the `RESET` on the keyboard.
|
||||
|
||||
### SparkFun PocketAVR / USBtinyISP / USBasp
|
||||
### SparkFun PocketAVR / USBtinyISP
|
||||
|
||||
[SparkFun PocketAVR](https://www.sparkfun.com/products/9825)
|
||||
[Adafruit USBtinyISP](https://www.adafruit.com/product/46)
|
||||
|
||||
!> SparkFun PocketAVR and USBtinyISP **DO NOT support** AVR chips with more than 64 KiB of flash (e.g., the AT90USB128 series). This limitation is mentioned on the [shop page for SparkFun PocketAVR](https://www.sparkfun.com/products/9825) and in the [FAQ for USBtinyISP](https://learn.adafruit.com/usbtinyisp/f-a-q#faq-2270879). If you try to use one of these programmers with AT90USB128 chips, you will get verification errors from `avrdude`, and the bootloader won't be flashed properly (e.g., see the [issue #3286](https://github.com/qmk/qmk_firmware/issues/3286)).
|
||||
|
||||
**AVRDUDE Programmer**: `usbtiny`
|
||||
**AVRDUDE Port**: `usb`
|
||||
|
||||
#### Wiring
|
||||
|
||||
|ISP |Keyboard|
|
||||
|---------|--------|
|
||||
|`VCC` |`VCC` |
|
||||
|`GND` |`GND` |
|
||||
|`RST` |`RESET` |
|
||||
|`SCLK` |`SCLK` |
|
||||
|`MOSI` |`MOSI` |
|
||||
|`MISO` |`MISO` |
|
||||
|
||||
|
||||
### USBasp
|
||||
|
||||
[Thomas Fischl's USBasp](https://www.fischl.de/usbasp/)
|
||||
|
||||
**AVRDUDE Programmer**: `usbtiny` / `usbasp`
|
||||
**AVRDUDE Programmer**: `usbasp`
|
||||
**AVRDUDE Port**: `usb`
|
||||
|
||||
#### Wiring
|
||||
|
|
Loading…
Reference in a new issue