1
0
Fork 0

Merge pull request #503 from fredizzimo/ergodox_subproject

Add both Ergodox EZ and Infinity Ergodox as sub-projects of Ergodox
This commit is contained in:
Jack Humbert 2016-07-29 22:32:27 -04:00 committed by GitHub
commit 063983639d
225 changed files with 1651 additions and 1795 deletions

View file

@ -0,0 +1,34 @@
#----------------------------------------------------------------------------
# On command line:
#
# make = Make software.
#
# make clean = Clean out built project files.
#
# That's pretty much all you need. To compile, always go make clean,
# followed by make.
#
# For advanced users only:
# make teensy = Download the hex file to the device, using teensy_loader_cli.
# (must have teensy_loader_cli installed).
#
#----------------------------------------------------------------------------
SUBPROJECT_DEFAULT = ez
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
CONSOLE_ENABLE ?= no # Console for debug(+400)
COMMAND_ENABLE ?= yes # Commands for debug and configuration
CUSTOM_MATRIX ?= yes # Custom matrix file for the ErgoDox EZ
SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
MIDI_ENABLE ?= no # MIDI controls
UNICODE_ENABLE ?= yes # Unicode
ifndef QUANTUM_DIR
include ../../Makefile
endif

View file

@ -0,0 +1,36 @@
#ifndef KEYBOARDS_ERGODOX_CONFIG_H_
#define KEYBOARDS_ERGODOX_CONFIG_H_
#define MOUSEKEY_DELAY 100
#define MOUSEKEY_INTERVAL 20
#define MOUSEKEY_MAX_SPEED 3
#define MOUSEKEY_TIME_TO_MAX 10
#define TAPPING_TOGGLE 1
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
#define TAPPING_TERM 200
#define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.)
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \
keyboard_report->mods == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \
)
#ifdef SUBPROJECT_ez
#include "ez/config.h"
#endif
#ifdef SUBPROJECT_infinity
#include "infinity/config.h"
#endif
#endif /* KEYBOARDS_ERGODOX_CONFIG_H_ */

View file

View file

@ -0,0 +1,10 @@
#ifndef KEYBOARDS_ERGODOX_ERGODOX_H_
#define KEYBOARDS_ERGODOX_ERGODOX_H_
#ifdef SUBPROJECT_ez
#include "ez.h"
#endif
#ifdef SUBPROJECT_infinity
#include "infinity.h"
#endif
#endif /* KEYBOARDS_ERGODOX_ERGODOX_H_ */

View file

@ -70,17 +70,7 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
# Build Options # Build Options
# comment out to disable the options. # comment out to disable the options.
# #
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
CONSOLE_ENABLE ?= no # Console for debug(+400)
COMMAND_ENABLE ?= yes # Commands for debug and configuration
CUSTOM_MATRIX ?= yes # Custom matrix file for the ErgoDox EZ
SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
MIDI_ENABLE ?= no # MIDI controls
UNICODE_ENABLE ?= yes # Unicode
ifndef QUANTUM_DIR ifndef QUANTUM_DIR
include ../../Makefile include ../../../Makefile
endif endif

View file

@ -16,10 +16,10 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. along with this program. If not, see <http://www.gnu.org/licenses/>.
*/ */
#ifndef CONFIG_H #ifndef ERGODOX_EZ_CONFIG_H
#define CONFIG_H #define ERGODOX_EZ_CONFIG_H
#include "config_common.h" #include "../config.h"
/* USB Device descriptor parameter */ /* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED #define VENDOR_ID 0xFEED
@ -33,34 +33,15 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROWS 14 #define MATRIX_ROWS 14
#define MATRIX_COLS 6 #define MATRIX_COLS 6
#define MOUSEKEY_DELAY 100
#define MOUSEKEY_INTERVAL 20
#define MOUSEKEY_MAX_SPEED 3
#define MOUSEKEY_TIME_TO_MAX 10
#define TAPPING_TOGGLE 1
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */ /* number of backlight levels */
#define BACKLIGHT_LEVELS 3 #define BACKLIGHT_LEVELS 3
#define LED_BRIGHTNESS_LO 15
#define LED_BRIGHTNESS_HI 255
/* Set 0 if debouncing isn't needed */ /* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5 #define DEBOUNCE 5
#define TAPPING_TERM 200
#define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.)
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \
keyboard_report->mods == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \
)
/* /*
* Feature disable options * Feature disable options

View file

@ -1,4 +1,4 @@
#include "ergodox_ez.h" #include "ez.h"
#include "i2cmaster.h" #include "i2cmaster.h"
bool i2c_initialized = 0; bool i2c_initialized = 0;

View file

@ -33,7 +33,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "debug.h" #include "debug.h"
#include "util.h" #include "util.h"
#include "matrix.h" #include "matrix.h"
#include "ergodox_ez.h" #include "ez.h"
#include "i2cmaster.h" #include "i2cmaster.h"
#ifdef DEBUG_MATRIX_SCAN_RATE #ifdef DEBUG_MATRIX_SCAN_RATE
#include "timer.h" #include "timer.h"

View file

@ -52,34 +52,26 @@ ARMV = 7
# Vector table for application # Vector table for application
# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ # 0x00000000-0x00001000 area is occupied by bootlaoder.*/
# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB # The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
OPT_DEFS = -DCORTEX_VTOR_INIT=0x00002000 OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000
# Build Options # Build Options
# comment out to disable the options. # comment out to disable the options.
# #
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration
## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
MOUSEKEY_ENABLE ?= yes # Mouse keys
EXTRAKEY_ENABLE ?= yes # Audio control and System control
CONSOLE_ENABLE ?= yes # Console for debug
COMMAND_ENABLE ?= yes # Commands for debug and configuration
SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
NKRO_ENABLE ?= yes # USB Nkey Rollover
CUSTOM_MATRIX ?= yes # Custom matrix file CUSTOM_MATRIX ?= yes # Custom matrix file
SERIAL_LINK_ENABLE = yes SERIAL_LINK_ENABLE = yes
VISUALIZER_ENABLE ?= yes VISUALIZER_ENABLE ?= no #temporarily disabled to make everything compile
LCD_ENABLE ?= yes LCD_ENABLE ?= yes
LED_ENABLE ?= yes LED_ENABLE ?= yes
LCD_BACKLIGHT_ENABLE ?= yes LCD_BACKLIGHT_ENABLE ?= yes
ifndef QUANTUM_DIR
include ../../../Makefile
endif
ifdef LCD_ENABLE ifdef LCD_ENABLE
include drivers/gdisp/st7565ergodox/driver.mk include $(SUBPROJECT_PATH)/drivers/gdisp/st7565ergodox/driver.mk
endif endif
ifdef LED_ENABLE ifdef LED_ENABLE
include drivers/gdisp/IS31FL3731C/driver.mk include $(SUBPROJECT_PATH)/drivers/gdisp/IS31FL3731C/driver.mk
endif
ifndef QUANTUM_DIR
include ../../Makefile
endif endif

View file

@ -15,8 +15,10 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. along with this program. If not, see <http://www.gnu.org/licenses/>.
*/ */
#ifndef CONFIG_H #ifndef INFINITY_ERGODOX_CONFIG_H
#define CONFIG_H #define INFINITY_ERGODOX_CONFIG_H
#include "../config.h"
/* USB Device descriptor parameter */ /* USB Device descriptor parameter */
@ -35,25 +37,18 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_COLS 5 #define MATRIX_COLS 5
#define LOCAL_MATRIX_ROWS 9 #define LOCAL_MATRIX_ROWS 9
/* number of backlight levels */
#define BACKLIGHT_LEVELS 3
#define LED_BRIGHTNESS_LO 15
#define LED_BRIGHTNESS_HI 255
/* define if matrix has ghost */ /* define if matrix has ghost */
//#define MATRIX_HAS_GHOST //#define MATRIX_HAS_GHOST
/* Set 0 if debouncing isn't needed */ /* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5 #define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
//#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
//#define LOCKING_RESYNC_ENABLE
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* Keymap for Infiity prototype */
#define INFINITY_PROTOTYPE
#define SERIAL_LINK_BAUD 562500 #define SERIAL_LINK_BAUD 562500
#define SERIAL_LINK_THREAD_PRIORITY (NORMALPRIO - 1) #define SERIAL_LINK_THREAD_PRIORITY (NORMALPRIO - 1)
// The visualizer needs gfx thread priorities // The visualizer needs gfx thread priorities

View file

@ -1,8 +1,10 @@
#include "infinity_ergodox.h" #include "infinity.h"
#include "ch.h" #include "ch.h"
#include "hal.h" #include "hal.h"
#include "serial_link/system/serial_link.h" #include "serial_link/system/serial_link.h"
#ifdef VISUALIZER_ENABLE
#include "lcd_backlight.h" #include "lcd_backlight.h"
#endif
void init_serial_link_hal(void) { void init_serial_link_hal(void) {
PORTA->PCR[1] = PORTx_PCRn_PE | PORTx_PCRn_PS | PORTx_PCRn_PFE | PORTx_PCRn_MUX(2); PORTA->PCR[1] = PORTx_PCRn_PE | PORTx_PCRn_PS | PORTx_PCRn_PFE | PORTx_PCRn_MUX(2);
@ -36,7 +38,7 @@ void init_serial_link_hal(void) {
// Using a higher pre-scalar without flicker is possible but FTM0_MOD will need to be reduced // Using a higher pre-scalar without flicker is possible but FTM0_MOD will need to be reduced
// Which will reduce the brightness range // Which will reduce the brightness range
#define PRESCALAR_DEFINE 0 #define PRESCALAR_DEFINE 0
#ifdef VISUALIZER_ENABLE
void lcd_backlight_hal_init(void) { void lcd_backlight_hal_init(void) {
// Setup Backlight // Setup Backlight
SIM->SCGC6 |= SIM_SCGC6_FTM0; SIM->SCGC6 |= SIM_SCGC6_FTM0;
@ -74,3 +76,57 @@ void lcd_backlight_hal_color(uint16_t r, uint16_t g, uint16_t b) {
CHANNEL_GREEN.CnV = g; CHANNEL_GREEN.CnV = g;
CHANNEL_BLUE.CnV = b; CHANNEL_BLUE.CnV = b;
} }
#endif
__attribute__ ((weak))
void matrix_init_user(void) {
}
__attribute__ ((weak))
void matrix_scan_user(void) {
}
void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
matrix_init_user();
}
void matrix_scan_kb(void) {
// put your looping keyboard code here
// runs every cycle (a lot)
matrix_scan_user();
}
void ergodox_board_led_on(void){
}
void ergodox_right_led_1_on(void){
}
void ergodox_right_led_2_on(void){
}
void ergodox_right_led_3_on(void){
}
void ergodox_right_led_on(uint8_t led){
}
void ergodox_board_led_off(void){
}
void ergodox_right_led_1_off(void){
}
void ergodox_right_led_2_off(void){
}
void ergodox_right_led_3_off(void){
}
void ergodox_right_led_off(uint8_t led){
}

View file

@ -0,0 +1,110 @@
#ifndef KEYBOARDS_ERGODOX_INFINITY_INFINITY_H_
#define KEYBOARDS_ERGODOX_INFINITY_INFINITY_H_
#include "quantum.h"
void ergodox_board_led_on(void);
void ergodox_right_led_1_on(void);
void ergodox_right_led_2_on(void);
void ergodox_right_led_3_on(void);
void ergodox_right_led_on(uint8_t led);
void ergodox_board_led_off(void);
void ergodox_right_led_1_off(void);
void ergodox_right_led_2_off(void);
void ergodox_right_led_3_off(void);
void ergodox_right_led_off(uint8_t led);
inline void ergodox_led_all_on(void)
{
ergodox_board_led_on();
ergodox_right_led_1_on();
ergodox_right_led_2_on();
ergodox_right_led_3_on();
}
inline void ergodox_led_all_off(void)
{
ergodox_board_led_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
}
inline void ergodox_right_led_1_set(uint8_t n){
if (n) {
ergodox_right_led_1_on();
} else {
ergodox_right_led_1_off();
}
}
inline void ergodox_right_led_2_set(uint8_t n){
if (n) {
ergodox_right_led_2_on();
} else {
ergodox_right_led_2_off();
}
}
inline void ergodox_right_led_3_set(uint8_t n){
if (n) {
ergodox_right_led_3_on();
} else {
ergodox_right_led_3_off();
}
}
inline void ergodox_right_led_set(uint8_t led, uint8_t n){
if (n) {
ergodox_right_led_on(led);
} else {
ergodox_right_led_off(led);
}
}
inline void ergodox_led_all_set(uint8_t n) {
ergodox_right_led_1_set(n);
ergodox_right_led_2_set(n);
ergodox_right_led_3_set(n);
}
#define KEYMAP( \
A80, A70, A60, A50, A40, A30, A20, \
A81, A71, A61, A51, A41, A31, A21, \
A82, A72, A62, A52, A42, A32, \
A83, A73, A63, A53, A43, A33, A23, \
A84, A74, A64, A54, A44, \
A13, A03, \
A04, \
A34, A24, A14, \
B20, B30, B40, B50, B60, B70, B80, \
B21, B31, B41, B51, B61, B71, B81, \
B32, B42, B52, B62, B72, B82, \
B23, B33, B43, B53, B63, B73, B83, \
B44, B54, B64, B74, B84, \
B03, B13, \
B04, \
B14, B24, B34 \
) { \
{ KC_NO, KC_NO, KC_NO, A03, A04 }, \
{ KC_NO, KC_NO, KC_NO, A13, A14 }, \
{ A20, A21, KC_NO, A23, A24 }, \
{ A30, A31, A32, A33, A34 }, \
{ A40, A41, A42, A43, A44 }, \
{ A50, A51, A52, A53, A54 }, \
{ A60, A61, A62, A63, A64 }, \
{ A70, A71, A72, A73, A74 }, \
{ A80, A81, A82, A83, A84 }, \
{ KC_NO, KC_NO, KC_NO, B03, B04 }, \
{ KC_NO, KC_NO, KC_NO, B13, B14 }, \
{ B20, B21, KC_NO, B23, B24 }, \
{ B30, B31, B32, B33, B34 }, \
{ B40, B41, B42, B43, B44 }, \
{ B50, B51, B52, B53, B54 }, \
{ B60, B61, B62, B63, B64 }, \
{ B70, B71, B72, B73, B74 }, \
{ B80, B81, B82, B83, B84 } \
}
#endif /* KEYBOARDS_ERGODOX_INFINITY_INFINITY_H_ */

View file

@ -63,6 +63,8 @@ void matrix_init(void)
memset(matrix, 0, MATRIX_ROWS); memset(matrix, 0, MATRIX_ROWS);
memset(matrix_debouncing, 0, LOCAL_MATRIX_ROWS); memset(matrix_debouncing, 0, LOCAL_MATRIX_ROWS);
matrix_init_quantum();
} }
uint8_t matrix_scan(void) uint8_t matrix_scan(void)
@ -127,6 +129,7 @@ uint8_t matrix_scan(void)
} }
debouncing = false; debouncing = false;
} }
matrix_scan_quantum();
return 1; return 1;
} }

View file

Before

Width:  |  Height:  |  Size: 79 KiB

After

Width:  |  Height:  |  Size: 79 KiB

View file

@ -1,4 +1,4 @@
#include "ergodox_ez.h" #include "ergodox.h"
#include "debug.h" #include "debug.h"
#include "action_layer.h" #include "action_layer.h"

View file

@ -1,4 +1,4 @@
#include "ergodox_ez.h" #include "ergodox.h"
#include "debug.h" #include "debug.h"
#include "action_layer.h" #include "action_layer.h"
#include "keymap_german.h" #include "keymap_german.h"

View file

@ -1,4 +1,4 @@
#include "ergodox_ez.h" #include "ergodox.h"
#include "debug.h" #include "debug.h"
#include "action_layer.h" #include "action_layer.h"

View file

Before

Width:  |  Height:  |  Size: 814 KiB

After

Width:  |  Height:  |  Size: 814 KiB

View file

Before

Width:  |  Height:  |  Size: 93 KiB

After

Width:  |  Height:  |  Size: 93 KiB

View file

Before

Width:  |  Height:  |  Size: 93 KiB

After

Width:  |  Height:  |  Size: 93 KiB

View file

Before

Width:  |  Height:  |  Size: 135 KiB

After

Width:  |  Height:  |  Size: 135 KiB

View file

Before

Width:  |  Height:  |  Size: 66 KiB

After

Width:  |  Height:  |  Size: 66 KiB

View file

Before

Width:  |  Height:  |  Size: 93 KiB

After

Width:  |  Height:  |  Size: 93 KiB

View file

Before

Width:  |  Height:  |  Size: 89 KiB

After

Width:  |  Height:  |  Size: 89 KiB

View file

Before

Width:  |  Height:  |  Size: 68 KiB

After

Width:  |  Height:  |  Size: 68 KiB

View file

@ -2,7 +2,7 @@
* algernon's ErgoDox EZ layout, please see the readme.md file! * algernon's ErgoDox EZ layout, please see the readme.md file!
*/ */
#include "ergodox_ez.h" #include "ergodox.h"
#include "led.h" #include "led.h"
#include "debug.h" #include "debug.h"
#include "action_layer.h" #include "action_layer.h"
@ -11,6 +11,7 @@
#include "timer.h" #include "timer.h"
#include "keymap_plover.h" #include "keymap_plover.h"
#include "eeconfig.h" #include "eeconfig.h"
#include "wait.h"
/* Layers */ /* Layers */
@ -858,12 +859,12 @@ void matrix_init_user(void) {
ergodox_led_all_on(); ergodox_led_all_on();
for (int i = LED_BRIGHTNESS_HI; i > LED_BRIGHTNESS_LO; i--) { for (int i = LED_BRIGHTNESS_HI; i > LED_BRIGHTNESS_LO; i--) {
ergodox_led_all_set (i); ergodox_led_all_set (i);
_delay_ms (5); wait_ms (5);
} }
_delay_ms(1000); wait_ms(1000);
for (int i = LED_BRIGHTNESS_LO; i > 0; i--) { for (int i = LED_BRIGHTNESS_LO; i > 0; i--) {
ergodox_led_all_set (i); ergodox_led_all_set (i);
_delay_ms (10); wait_ms (10);
} }
ergodox_led_all_off(); ergodox_led_all_off();
@ -883,14 +884,14 @@ void ang_do_unicode (void) {
unregister_code (KC_U); unregister_code (KC_U);
unregister_code (KC_RSFT); unregister_code (KC_RSFT);
unregister_code (KC_RCTL); unregister_code (KC_RCTL);
_delay_ms (100); wait_ms (100);
} }
void ang_tap (uint16_t codes[]) { void ang_tap (uint16_t codes[]) {
for (int i = 0; codes[i] != 0; i++) { for (int i = 0; codes[i] != 0; i++) {
register_code (codes[i]); register_code (codes[i]);
unregister_code (codes[i]); unregister_code (codes[i]);
_delay_ms (50); wait_ms (50);
} }
} }
@ -1079,7 +1080,7 @@ void matrix_scan_user(void) {
#if KEYLOGGER_ENABLE #if KEYLOGGER_ENABLE
SEQ_ONE_KEY (KC_D) { SEQ_ONE_KEY (KC_D) {
ergodox_led_all_on(); ergodox_led_all_on();
_delay_ms(100); wait_ms(100);
ergodox_led_all_off(); ergodox_led_all_off();
log_enable = !log_enable; log_enable = !log_enable;
} }
@ -1126,7 +1127,7 @@ void matrix_scan_user(void) {
unregister_code (KC_F2); unregister_code (KC_F2);
unregister_code (KC_LALT); unregister_code (KC_LALT);
_delay_ms (1000); wait_ms (1000);
uint16_t codes[] = {KC_M, KC_A, KC_X, KC_MINS, KC_F, KC_O, KC_C, KC_U, KC_S, KC_E, KC_D, KC_ENT, 0}; uint16_t codes[] = {KC_M, KC_A, KC_X, KC_MINS, KC_F, KC_O, KC_C, KC_U, KC_S, KC_E, KC_D, KC_ENT, 0};
ang_tap (codes); ang_tap (codes);
@ -1145,14 +1146,14 @@ void matrix_scan_user(void) {
ergodox_led_all_off (); ergodox_led_all_off ();
ergodox_right_led_3_on (); ergodox_right_led_3_on ();
_delay_ms (100); wait_ms (100);
ergodox_right_led_2_on (); ergodox_right_led_2_on ();
_delay_ms (100); wait_ms (100);
ergodox_right_led_3_off (); ergodox_right_led_3_off ();
ergodox_right_led_1_on (); ergodox_right_led_1_on ();
_delay_ms (100); wait_ms (100);
ergodox_right_led_2_off (); ergodox_right_led_2_off ();
_delay_ms (100); wait_ms (100);
ergodox_right_led_1_off (); ergodox_right_led_1_off ();
} else { } else {
is_adore = 0; is_adore = 0;
@ -1162,14 +1163,14 @@ void matrix_scan_user(void) {
ergodox_led_all_off (); ergodox_led_all_off ();
ergodox_right_led_1_on (); ergodox_right_led_1_on ();
_delay_ms (100); wait_ms (100);
ergodox_right_led_2_on (); ergodox_right_led_2_on ();
_delay_ms (100); wait_ms (100);
ergodox_right_led_1_off (); ergodox_right_led_1_off ();
ergodox_right_led_3_on (); ergodox_right_led_3_on ();
_delay_ms (100); wait_ms (100);
ergodox_right_led_2_off (); ergodox_right_led_2_off ();
_delay_ms (100); wait_ms (100);
ergodox_right_led_3_off (); ergodox_right_led_3_off ();
} }
} }

View file

@ -1,7 +1,7 @@
// Netable differences vs. the default firmware for the ErgoDox EZ: // Netable differences vs. the default firmware for the ErgoDox EZ:
// 1. The Cmd key is now on the right side, making Cmd+Space easier. // 1. The Cmd key is now on the right side, making Cmd+Space easier.
// 2. The media keys work on OSX (But not on Windows). // 2. The media keys work on OSX (But not on Windows).
#include "ergodox_ez.h" #include "ergodox.h"
#include "debug.h" #include "debug.h"
#include "action_layer.h" #include "action_layer.h"

View file

Before

Width:  |  Height:  |  Size: 78 KiB

After

Width:  |  Height:  |  Size: 78 KiB

View file

@ -1,4 +1,4 @@
#include "ergodox_ez.h" #include "ergodox.h"
#include "debug.h" #include "debug.h"
#include "action_layer.h" #include "action_layer.h"
#include "keymap_bepo.h" #include "keymap_bepo.h"

View file

@ -1,4 +1,4 @@
#include "ergodox_ez.h" #include "ergodox.h"
#include "debug.h" #include "debug.h"
#include "action_layer.h" #include "action_layer.h"
#include "led.h" #include "led.h"

View file

@ -1,4 +1,4 @@
#include "ergodox_ez.h" #include "ergodox.h"
#include "debug.h" #include "debug.h"
#include "action_layer.h" #include "action_layer.h"

View file

Before

Width:  |  Height:  |  Size: 101 KiB

After

Width:  |  Height:  |  Size: 101 KiB

View file

@ -1,4 +1,4 @@
#include "ergodox_ez.h" #include "ergodox.h"
#include "debug.h" #include "debug.h"
#include "action_layer.h" #include "action_layer.h"
#include "keymap_norwegian.h" #include "keymap_norwegian.h"

View file

Before

Width:  |  Height:  |  Size: 95 KiB

After

Width:  |  Height:  |  Size: 95 KiB

View file

Before

Width:  |  Height:  |  Size: 379 KiB

After

Width:  |  Height:  |  Size: 379 KiB

View file

@ -1,4 +1,4 @@
#include "ergodox_ez.h" #include "ergodox.h"
#include "debug.h" #include "debug.h"
#include "action_layer.h" #include "action_layer.h"

View file

@ -1,4 +1,4 @@
#include "ergodox_ez.h" #include "ergodox.h"
#include "debug.h" #include "debug.h"
#include "action_layer.h" #include "action_layer.h"

View file

Before

Width:  |  Height:  |  Size: 189 KiB

After

Width:  |  Height:  |  Size: 189 KiB

View file

Before

Width:  |  Height:  |  Size: 1.4 MiB

After

Width:  |  Height:  |  Size: 1.4 MiB

View file

@ -1,4 +1,4 @@
#include "ergodox_ez.h" #include "ergodox.h"
#include "debug.h" #include "debug.h"
#include "action_layer.h" #include "action_layer.h"

View file

Before

Width:  |  Height:  |  Size: 754 KiB

After

Width:  |  Height:  |  Size: 754 KiB

View file

@ -1,7 +1,7 @@
// Netable differences vs. the default firmware for the ErgoDox EZ: // Netable differences vs. the default firmware for the ErgoDox EZ:
// 1. The Cmd key is now on the right side, making Cmd+Space easier. // 1. The Cmd key is now on the right side, making Cmd+Space easier.
// 2. The media keys work on OSX (But not on Windows). // 2. The media keys work on OSX (But not on Windows).
#include "ergodox_ez.h" #include "ergodox.h"
#include "debug.h" #include "debug.h"
#include "action_layer.h" #include "action_layer.h"

View file

@ -1,4 +1,4 @@
#include "ergodox_ez.h" #include "ergodox.h"
#include "debug.h" #include "debug.h"
#include "action_layer.h" #include "action_layer.h"

View file

Before

Width:  |  Height:  |  Size: 85 KiB

After

Width:  |  Height:  |  Size: 85 KiB

View file

@ -1,4 +1,4 @@
#include "ergodox_ez.h" #include "ergodox.h"
#include "debug.h" #include "debug.h"
#include "action_layer.h" #include "action_layer.h"

View file

Before

Width:  |  Height:  |  Size: 72 KiB

After

Width:  |  Height:  |  Size: 72 KiB

View file

Before

Width:  |  Height:  |  Size: 58 KiB

After

Width:  |  Height:  |  Size: 58 KiB

View file

Before

Width:  |  Height:  |  Size: 52 KiB

After

Width:  |  Height:  |  Size: 52 KiB

View file

@ -1,4 +1,4 @@
#include "ergodox_ez.h" #include "ergodox.h"
#include "debug.h" #include "debug.h"
#include "action_layer.h" #include "action_layer.h"

View file

@ -1,4 +1,4 @@
#include "ergodox_ez.h" #include "ergodox.h"
#include "debug.h" #include "debug.h"
#include "action_layer.h" #include "action_layer.h"

Some files were not shown because too many files have changed in this diff Show more