[Keyboard] Add Dosa40RGB + dtisaac01 (#14476)

keyboards/dtisaac/dosa40rgb/config.h

@@ -0,0 +1,73 @@
+/*
+Copyright 2021 DTIsaac
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0x4454 // DT
+#define PRODUCT_ID   0x4973 // Is
+#define DEVICE_VER   0x0004
+#define MANUFACTURER DTIsaac
+#define PRODUCT      >_Dosa40
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 11
+
+/* AdafruitBle Pin */
+#define AdafruitBleResetPin D4
+#define AdafruitBleCSPin    B4
+#define AdafruitBleIRQPin   E6
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B7, D7, F1, F0 }
+#define MATRIX_COL_PINS { D1, D6, D3, D2, B6, C6, C7, F7, F6, F5, F4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+#ifdef RGB_MATRIX_ENABLE
+#define RGB_DI_PIN D0
+#define DRIVER_LED_TOTAL 42
+#define RGB_MATRIX_KEYPRESSES // reacts to keypresses
+#define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
+#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
+// #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
+#define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
+#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
+#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION

keyboards/dtisaac/dosa40rgb/dosa40rgb.c

@@ -0,0 +1,39 @@
+/* Copyright 2021 DTIsaac
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "dosa40rgb.h"
+
+#ifdef RGB_MATRIX_ENABLE
+led_config_t g_led_config = { {
+  //Key Matrix to LED Index
+  {0,         1,         2,           3,          4,          5,          6,          7,          8,          9,          10},
+  {22,        21,        20,          19,         18,         17,         16,         15,         14,         13,         12 },
+  {23,        24,        25,          26,         27,         28,         29,         30,         31,         32,         33},
+  {41,        40,        39,          NO_LED,     38,     NO_LED,         37,         36,         35,         34,         11}
+}, {
+  //LED Index to Physical Positon
+  {  0,  0},  { 20,  0},  { 40, 0 },  { 61, 0 },  { 81, 0},   { 101, 0},  { 122, 0},  { 142, 0},  { 162, 0},  { 183, 0},  { 203, 0}, { 224, 0},  
+  {203, 21},  {183, 21},  {162,21 },  {142, 21},  {122,21},   { 101,21},  { 81 ,21},  { 61 ,21},  { 40 ,21},  { 20 ,21},  { 0  ,21}, 
+  {  0, 42},  { 20, 42},  { 40,42 },  { 61, 42},  { 81,42},   { 101,42},  { 122,42},  { 142,42},  { 162,42},  { 183,42},  { 203,42}, 
+  {203, 64},  {183, 64},  {162,64 },  {122, 64},  { 81,64},   { 40, 64},  { 20, 64},  { 0, 64},
+}, {
+  1,		  4,		 4,          4,         4,         4,          4,          4,          4,          4,		   4,			1, 
+  1,          4,         4,          4,         4,         4,          4,          4,          4,          4,          1,          
+  1,          4,         4,          4,         4,         4,          4,          4,          4,          4,		   1,         
+  1,          1,         1,          1,         1,         1,          1,          1,
+} };
+
+#endif

keyboards/dtisaac/dosa40rgb/dosa40rgb.h

@@ -0,0 +1,40 @@
+/* Copyright 2021 DTIsaac
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k41, \
+	k11, k12, k13, k14, k15, k16, k17, k18, k19, k20, k21, \
+	k22, k23, k24, k25, k26, k27, k28, k29, k30, k31, k32, \
+	k33, k34, k35, k36, k37, k38, k39, k40 \
+) \
+{ \
+    {k00, k01, k02, k03,  k04, k05,   k06, k07, k08, k09, k10}, \
+    {k11, k12, k13, k14,  k15, k16,   k17, k18, k19, k20, k21}, \
+    {k22, k23, k24, k25,  k26, k27,   k28, k29, k30, k31, k32}, \
+    {k33, k34, k35, KC_NO,k36, KC_NO, k37, k38, k39, k40, k41}, \
+}

keyboards/dtisaac/dosa40rgb/info.json

@@ -0,0 +1,53 @@
+{
+    "keyboard_name": ">_Dosa40rgb",
+    "url": "",
+    "maintainer": "DTIsaac",
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"Esc", "x":0, "y":0},
+                {"label":"Q", "x":1, "y":0},
+                {"label":"W", "x":2, "y":0},
+                {"label":"E", "x":3, "y":0},
+                {"label":"R", "x":4, "y":0},
+                {"label":"T", "x":5, "y":0},
+                {"label":"Y", "x":6, "y":0},
+                {"label":"U", "x":7, "y":0},
+                {"label":"I", "x":8, "y":0},
+                {"label":"O", "x":9, "y":0},
+                {"label":"P", "x":10, "y":0},
+                {"label":"BSPC", "x":11, "y":0},
+                {"label":"Caps Lock", "x":0, "y":1, "w":1.5},
+                {"label":"A", "x":1.5, "y":1},
+                {"label":"S", "x":2.5, "y":1},
+                {"label":"D", "x":3.5, "y":1},
+                {"label":"F", "x":4.5, "y":1},
+                {"label":"G", "x":5.5, "y":1},
+                {"label":"H", "x":6.5, "y":1},
+                {"label":"J", "x":7.5, "y":1},
+                {"label":"K", "x":8.5, "y":1},
+                {"label":"L", "x":9.5, "y":1},
+                {"label":"Enter", "x":10.5, "y":1, "w":1.5},
+                {"label":"Shift", "x":0, "y":2, "w":1.75},
+                {"label":"Z", "x":1.75, "y":2},
+                {"label":"X", "x":2.75, "y":2},
+                {"label":"C", "x":3.75, "y":2},
+                {"label":"V", "x":4.75, "y":2},
+                {"label":"B", "x":5.75, "y":2},
+                {"label":"N", "x":6.75, "y":2},
+                {"label":"M", "x":7.75, "y":2},
+                {"label":",", "x":8.75, "y":2},
+                {"label":".", "x":9.75, "y":2},
+                {"label":"Shift", "x":10.75, "y":2, "w":1.25},
+                {"label":"Ctrl", "x":0, "y":3, "w":1.25},
+                {"label":"Win", "x":1.25, "y":3, "w":1},
+                {"label":"Alt", "x":2.25, "y":3, "w":1.25},
+                {"label":"Space", "x":3.5, "y":3, "w":2.25},
+                {"label":"Space", "x":5.75, "y":3, "w":2.75},
+                {"label":"App", "x":8.5, "y":3, "w":1.25},
+                {"label":"Fn", "x":9.75, "y":3, "w":1},
+                {"label":"Ctrl", "x":10.75, "y":3, "w":1.25}
+            ]
+        }
+    }
+}

keyboards/dtisaac/dosa40rgb/keymaps/default/keymap.c

@@ -0,0 +1,122 @@
+/* Copyright 2021 DTIsaac
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+#include "spi_master.h"
+#include "wait.h"
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _L1,
+	_L2
+};
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+    BASE,
+	L1,
+	BLE_DIS, // Disconnect BLE
+	LED_EN, // Toggle LED
+};
+
+#define L1 MO(_L1)
+const uint8_t cm1[] = "AT+GAPSTOPADV";
+const uint8_t cm2[] = "AT+GAPDISCONNECT";
+const uint8_t cm3[] = "ATZ";
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Base */
+	[_BASE] = LAYOUT(
+				 KC_ESC,          KC_Q,     KC_W,      KC_E,      KC_R,     KC_T,     KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,   KC_BSPC,
+                 LT(_L2,KC_CAPS), KC_A,     KC_S,      KC_D,      KC_F,     KC_G,     KC_H,     KC_J,     KC_K,     KC_L,     KC_ENT,
+                 KC_LSFT,         KC_Z,     KC_X,      KC_C,      KC_V,     KC_B,     KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_RSFT,
+                 KC_LCTL,         KC_LGUI,  KC_LALT,   			  KC_SPACE,           KC_SPACE,			  KC_RALT,  L1,		  KC_RCTL
+    ),
+    [_L1] = LAYOUT(
+				 RESET,           KC_1,     KC_2,      KC_3,      KC_4,     KC_5,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,    KC_DEL,
+                 KC_TRNS,         KC_F1,    KC_F2,     KC_F3,     KC_F4,    KC_F5,    KC_F6,    KC_MINS,  KC_EQL,   KC_SCLN,  KC_QUOT,
+                 KC_TRNS,         KC_F7,    KC_F8,     KC_F9,     KC_F10,   KC_F11,   KC_F12,   KC_TRNS,  KC_TRNS,  KC_SLSH,  KC_TRNS,
+                 KC_TRNS,         KC_TRNS,  KC_TRNS,   			  KC_TRNS,            KC_TRNS,   		  KC_TRNS,  KC_TRNS,  KC_TRNS
+	),
+    [_L2] = LAYOUT(
+                 LED_EN,          RGB_RMOD, KC_UP,     RGB_MOD,   RGB_HUI,  RGB_VAI,  RGB_SAI,  RGB_SPI,  KC_TRNS,  OUT_USB,  OUT_BT,  BLE_DIS,
+                 KC_TRNS,         KC_LEFT,  KC_DOWN,   KC_RGHT,   RGB_HUD,  RGB_VAD,  RGB_SAD,  RGB_SPD,  KC_TRNS,  KC_TRNS,  KC_BSLS,
+                 KC_TRNS,         KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+                 KC_TRNS,         KC_TRNS,  KC_TRNS,   			  KC_TAB,             KC_TRNS,  		  KC_TRNS,  KC_TRNS,  KC_TRNS
+    ),
+};
+
+void rgb_matrix_indicators_user(void)
+{
+ 	if (host_keyboard_led_state().caps_lock)
+	{
+		rgb_matrix_set_color(22, 200, 200, 200);
+	}
+	if (IS_LAYER_ON(_L1))
+	{
+		rgb_matrix_set_color(35, 0, 200, 200);
+	}
+	if (IS_LAYER_ON(_L2))
+	{
+		rgb_matrix_set_color(22, 200, 0, 200);
+	}
+}
+
+void sdep_send(const uint8_t *cmd, uint8_t len) {
+	
+    spi_start(AdafruitBleCSPin, false, 0, 2);
+    uint8_t cnt = 200;
+    bool     ready      = false;
+
+    do {
+        ready = spi_write(0x10) != 0xFE;
+        if (ready) {
+            break;
+        }
+        spi_stop();
+        wait_us(25);
+        spi_start(AdafruitBleCSPin, false, 0, 2);
+    } while (cnt--);
+
+    if (ready) {
+		spi_write(0x00);
+		spi_write(0x0A);
+		spi_write(len);
+        spi_transmit(cmd, len);
+    }
+
+    spi_stop();
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	
+    switch (keycode) {
+        case LED_EN:
+            if (record->event.pressed) {
+				DDRB = DDRB ^ 0x20;
+				PORTB &= ~(1 << 5);
+            }
+            return false;
+		case BLE_DIS:
+            if (record->event.pressed) {
+				sdep_send(cm1,sizeof(cm1));
+				sdep_send(cm2,sizeof(cm2));
+				sdep_send(cm3,sizeof(cm3));
+            }
+            return false;
+    }
+    return true;
+}

keyboards/dtisaac/dosa40rgb/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for dosa40rgb

keyboards/dtisaac/dosa40rgb/readme.md

@@ -0,0 +1,25 @@
+# dosa40rgb
+
+![dosa40rgb](https://i.imgur.com/NfuF82nh.jpg)
+
+A 40 percent keyboard dosa40rgb Bluetooth Low Energy
+
+* Keyboard Maintainer: [DTIsaac](https://github.com/daotakisaac)
+* Hardware Supported: ATmega32U4 + AdafruitBLE SPI
+
+Make example for this keyboard (after setting up your build environment):
+
+    make dtisaac/dosa40rgb:default
+
+Flashing example for this keyboard:
+
+    make dtisaac/dosa40rgb:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 2 ways:
+
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available

keyboards/dtisaac/dosa40rgb/rules.mk

@@ -0,0 +1,25 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = lufa-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = no        # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+BLUETOOTH = AdafruitBLE     # Enable Bluetooth
+RGB_MATRIX_ENABLE = yes
+RGB_MATRIX_DRIVER = WS2812

keyboards/dtisaac/dtisaac01/keymaps/via/keymap.c

@@ -0,0 +1,59 @@
+/* Copyright 2021 DTIsaac
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layers {
+    _LAYER0,
+    _LAYER1,
+	_LAYER2,
+	_LAYER3,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_LAYER0] = LAYOUT(
+        KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,   KC_F11,  KC_F12,             KC_PSCR, KC_SLCK, KC_PAUS,
+		KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_BSPC,            KC_INS,  KC_HOME, KC_PGUP,
+		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC,  KC_RBRC, KC_BSLS,            KC_DEL,  KC_END,  KC_PGDN,
+		KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,       KC_ENT,
+		   KC_LSFT,       KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,       KC_RSFT,                         KC_UP, 
+		KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                             KC_RALT, KC_RGUI, LT(1, KC_NO),  KC_RCTL,                KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    [_LAYER1] = LAYOUT(
+        RESET,              _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,            KC_SLEP,  KC_WAKE,  KC_PWR,
+		_______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,            BL_STEP,  BL_ON,    BL_INC,
+		_______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,            BL_BRTG,  BL_OFF,   BL_DEC,
+		_______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,       _______,
+		    _______,        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,       _______,                           KC_VOLU, 
+		_______,  _______,  _______,                                _______,                                _______,  _______,  _______,  _______,            KC_MPRV,  KC_VOLD,  KC_MNXT
+    ),
+	[_LAYER2] = LAYOUT(
+        RESET,              _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,            _______,  _______,  _______,
+		_______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,            _______,  _______,  _______,
+		_______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,            _______,  _______,  _______,
+		_______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,       _______,
+		    _______,        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,       _______,                           _______, 
+		_______,  _______,  _______,                                _______,                                _______,  _______,  _______,  _______,            _______,  _______,  _______
+    ),
+	[_LAYER3] = LAYOUT(
+        RESET,              _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,            _______,  _______,  _______,
+		_______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,            _______,  _______,  _______,
+		_______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,            _______,  _______,  _______,
+		_______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,       _______,
+		    _______,        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,       _______,                           _______, 
+		_______,  _______,  _______,                                _______,                                _______,  _______,  _______,  _______,            _______,  _______,  _______
+    ),
+};

keyboards/dtisaac/dtisaac01/keymaps/via/readme.md

@@ -0,0 +1 @@
+# The default keymap for dtisaac01

keyboards/dtisaac/dtisaac01/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes