Merge pull request #15 from jackhumbert/master

Merge from qmk

Makefile

@@ -473,7 +473,7 @@ if [ $$error_occured -gt 0 ]; then echo $$error_occured > $(ERROR_FILE); fi;
 endef
 define RUN_TEST
 +error_occured=0;\
-$($(TEST)_COMMAND))\
+$($(TEST)_COMMAND)\
 if [ $$error_occured -gt 0 ]; then echo $$error_occured > $(ERROR_FILE); fi;
 
 endef
@@ -485,11 +485,11 @@ $(SUBPROJECTS): %: %-allkm
 
 # Let's match everything, we handle all the rule parsing ourselves
 .PHONY: %
-ifndef SKIP_GIT
 %:
 	# Check if we have the CMP tool installed
 	cmp --version >/dev/null 2>&1; if [ $$? -gt 0 ]; then printf "$(MSG_NO_CMP)"; exit 1; fi;
 	# Check if the submodules are dirty, and display a warning if they are
+ifndef SKIP_GIT
 	git submodule status --recursive 2>/dev/null | \
 	while IFS= read -r x; do \
 		case "$$x" in \
@@ -497,33 +497,18 @@ ifndef SKIP_GIT
 			*) printf "$(MSG_SUBMODULE_DIRTY)";break;; \
 		esac \
 	done
-	rm -f $(ERROR_FILE) > /dev/null 2>&1
-	$(eval $(call PARSE_RULE,$@))
-	$(eval $(call SET_SILENT_MODE))
-	# Run all the commands in the same shell, notice the + at the first line
-	# it has to be there to allow parallel execution of the submake
-	# This always tries to compile everything, even if error occurs in the middle
-	# But we return the error code at the end, to trigger travis failures
-	$(foreach COMMAND,$(COMMANDS),$(RUN_COMMAND))
-	if [ -f $(ERROR_FILE) ]; then printf "$(MSG_ERRORS)" & exit 1; fi;
-	$(foreach TEST,$(TESTS),$(RUN_TEST))
-	if [ -f $(ERROR_FILE) ]; then printf "$(MSG_ERRORS)" & exit 1; fi;
-else
-%:
-	# Check if we have the CMP tool installed
-	cmp --version >/dev/null 2>&1; if [ $$? -gt 0 ]; then printf "$(MSG_NO_CMP)"; exit 1; fi;
-	rm -f $(ERROR_FILE) > /dev/null 2>&1
-	$(eval $(call PARSE_RULE,$@))
-	$(eval $(call SET_SILENT_MODE))
-	# Run all the commands in the same shell, notice the + at the first line
-	# it has to be there to allow parallel execution of the submake
-	# This always tries to compile everything, even if error occurs in the middle
-	# But we return the error code at the end, to trigger travis failures
-	$(foreach COMMAND,$(COMMANDS),$(RUN_COMMAND))
-	if [ -f $(ERROR_FILE) ]; then printf "$(MSG_ERRORS)" & exit 1; fi;
-	$(foreach TEST,$(TESTS),$(RUN_TEST))
-	if [ -f $(ERROR_FILE) ]; then printf "$(MSG_ERRORS)" & exit 1; fi;
 endif
+	rm -f $(ERROR_FILE) > /dev/null 2>&1
+	$(eval $(call PARSE_RULE,$@))
+	$(eval $(call SET_SILENT_MODE))
+	# Run all the commands in the same shell, notice the + at the first line
+	# it has to be there to allow parallel execution of the submake
+	# This always tries to compile everything, even if error occurs in the middle
+	# But we return the error code at the end, to trigger travis failures
+	$(foreach COMMAND,$(COMMANDS),$(RUN_COMMAND))
+	if [ -f $(ERROR_FILE) ]; then printf "$(MSG_ERRORS)" & exit 1; fi;
+	$(foreach TEST,$(TESTS),$(RUN_TEST))
+	if [ -f $(ERROR_FILE) ]; then printf "$(MSG_ERRORS)" & exit 1; fi;
 
 # All should compile everything
 .PHONY: all

keyboards/amjpad/Makefile

@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif

keyboards/amjpad/amjpad.c

@@ -0,0 +1,30 @@
+#include "amjpad.h"
+#include "led.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	matrix_init_user();
+	led_init_ports();
+};
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+	matrix_scan_user();
+};
+
+void led_init_ports(void) {
+    // * Set our LED pins as output
+    DDRD |= (1<<6);
+}
+
+void led_set_kb(uint8_t usb_led) {
+    if (usb_led & (1<<USB_LED_NUM_LOCK)) {
+        // Turn numlock on
+        PORTD &= ~(1<<6);
+    } else {
+        // Turn numlock off
+        PORTD |= (1<<6);
+    }
+}

keyboards/amjpad/amjpad.h

@@ -0,0 +1,46 @@
+#ifndef AMJPAD_H
+#define ADMJPAD_H
+
+#include "quantum.h"
+
+// readability
+#define XXX KC_NO
+
+/* AMJPAD matrix layout
+   * ,-------------------.
+   * | 00 | 01 | 02 | 03 |
+   * |----|----|----|----|
+   * | 10 | 11 | 12 | 13 |
+   * |----|----|----|----|
+   * | 20 | 21 | 22 |    |
+   * |----|----|----| 23 |
+   * | 30 | 31 | 32 |    |
+   * |----|----|----|----|
+   * | 40 | 41 | 42 |    |
+   * |----|----|----| 43 |
+   * |   50    | 52 |    |
+   * `-------------------'
+ */
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define KEYMAP( \
+    k00, k01, k02, k03, \
+	k10, k11, k12, k13, \
+	k20, k21, k22, k23, \
+	k30, k31, k32, \
+	k40, k41, k42, k43, \
+	k50, k52 \
+) \
+{ \
+	{k00, k01, k02, k03}, \
+	{k10, k11, k12, k13}, \
+	{k20, k21, k22, k23}, \
+	{k30, k31, k32, XXX}, \
+	{k40, k41, k42, k43}, \
+	{k50, XXX, k52, XXX} \
+}
+
+void matrix_init_user(void);
+void matrix_scan_user(void);
+
+#endif

keyboards/amjpad/config.h

@@ -0,0 +1,94 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0003
+#define MANUFACTURER    AMJ
+#define PRODUCT         PAD
+#define DESCRIPTION     QMK keyboard firmware for AMJ PAD
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 4
+
+// ROWS: Top to bottom, COLS: Left to right
+
+#define MATRIX_ROW_PINS { F7, F6, F5, F4, D5, D0 }
+#define MATRIX_COL_PINS { F1, F0, E6, C7 }
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN B6
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Backlight configuration
+ */
+#define BACKLIGHT_LEVELS 4
+
+/* Underlight configuration
+ */
+
+#define RGB_DI_PIN E2
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 8     // Number of LEDs
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif

keyboards/amjpad/keymaps/default/keymap.c

@@ -0,0 +1,101 @@
+#include "amjpad.h"
+
+#ifdef RGBLIGHT_ENABLE
+#include "rgblight.h"
+#endif
+
+// Used for SHIFT_ESC
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+
+#define _______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap _BL: (Base Layer) Default Layer
+   * ,-------------------.
+   * |Esc |TAB |BS  | =  |
+   * |----|----|----|----|
+   * | NL | /  | *  | -  |
+   * |----|----|----|----|
+   * | 7  | 8  | 9  |    |
+   * |----|----|----| +  |
+   * | 4  | 5  | 6  |    |
+   * |----|----|----|----|
+   * | 1  | 2  | 3  |    |
+   * |----|----|----| En |
+   * |   0     |./FN|    |
+   * `-------------------'
+   */
+
+[_BL] = KEYMAP(
+  KC_ESC,KC_TAB,KC_BSPC,KC_PEQL, \
+  KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
+  KC_P7, KC_P8, KC_P9, KC_PPLS,  \
+  KC_P4, KC_P5, KC_P6, \
+  KC_P1, KC_P2, KC_P3, KC_PENT, \
+  KC_P0, LT(_FL,KC_PDOT)),
+
+  /* Keymap _FL: Function Layer
+   * ,-------------------.
+   * |Esc |TAB |BS  | =  |
+   * |----|----|----|----|
+   * | NL | /  | *  | -  |
+   * |----|----|----|----|
+   * | 7  | 8  | 9  |    |
+   * |----|----|----|RST |
+   * | 4  | 5  | 6  |    |
+   * |----|----|----|----|
+   * | 1  | 2  | 3  |    |
+   * |----|----|----| En |
+   * |   0     |./FN|    |
+   * `-------------------'
+   */
+[_FL] = KEYMAP(
+  
+  KC_ESC,KC_TAB,KC_BSPC,KC_PEQL, \
+  KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \
+  KC_P7, KC_P8, KC_P9, RESET,  \
+  KC_P4, KC_P5, KC_P6, \
+  KC_P1, KC_P2, KC_P3, KC_PENT, \
+  KC_P0, LT(_FL,KC_PDOT)),
+};
+
+enum function_id {
+    SHIFT_ESC,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0]  = ACTION_FUNCTION(SHIFT_ESC),
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  static uint8_t shift_esc_shift_mask;
+  switch (id) {
+    case SHIFT_ESC:
+      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
+      if (record->event.pressed) {
+        if (shift_esc_shift_mask) {
+          add_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          add_key(KC_ESC);
+          send_keyboard_report();
+        }
+      } else {
+        if (shift_esc_shift_mask) {
+          del_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          del_key(KC_ESC);
+          send_keyboard_report();
+        }
+      }
+      break;
+  }
+}

keyboards/amjpad/rules.mk

@@ -0,0 +1,66 @@
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes	# Console for debug(+400)
+COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE ?= no   # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE ?= no 		# MIDI controls
+AUDIO_ENABLE ?= no
+UNICODE_ENABLE ?= no 		# Unicode
+BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID

keyboards/ergodox/ez/Makefile

@@ -1,7 +1,7 @@
 SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
 COMMAND_ENABLE   = no  # Commands for debug and configuration
 RGBLIGHT_ENABLE ?= yes
-MIDI_ENABLE ?= yes
+MIDI_ENABLE ?= no
 
 ifndef MAKEFILE_INCLUDED
 	include ../../../Makefile

keyboards/ergodox/ez/config.h

@@ -52,11 +52,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_MIDI
 #define RGBW_BB_TWI
 
+#define RGBW 1
 
 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCE    5
 
-#define USB_MAX_POWER_CONSUMPTION 50
+#define USB_MAX_POWER_CONSUMPTION 500
 
 /*
  * Feature disable options

keyboards/ergodox/ez/rules.mk

@@ -72,7 +72,7 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
 #
 
 SLEEP_LED_ENABLE = no
-API_SYSEX_ENABLE ?= yes
+API_SYSEX_ENABLE ?= no
 RGBLIGHT_ENABLE ?= yes
 
 ifndef QUANTUM_DIR

keyboards/ergodox/keymaps/algernon/NEWS.md

@@ -1,5 +1,19 @@
 <!-- -*- mode: markdown; fill-column: 8192 -*- -->
 
+## v1.10
+
+*2016-12-28*
+
+### Miscellaneous
+
+* `µ` can now be entered with UCIS.
+* `™` can now be entered with UCIS.
+
+### Tools
+
+* `tools/hid-commands` can now find Banshee, and prefers it over Kodi.
+* `tools/hid-commands` can now find Chrome too, not juts Chromium.
+
 ## v1.9
 
 *2016-10-16*

keyboards/ergodox/keymaps/algernon/keymap.c

@@ -96,8 +96,6 @@ enum {
 
 uint16_t gui_timer = 0;
 
-uint16_t kf_timers[12];
-
 #if KEYLOGGER_ENABLE
 # ifdef AUTOLOG_ENABLE
 bool log_enable = true;
@@ -1040,7 +1038,9 @@ const qk_ucis_symbol_t ucis_symbol_table[] = UCIS_TABLE
  UCIS_SYM("heart", 0x2764),
  UCIS_SYM("bolt", 0x26a1),
  UCIS_SYM("pi", 0x03c0),
- UCIS_SYM("mouse", 0x1f401)
+ UCIS_SYM("mouse", 0x1f401),
+ UCIS_SYM("micro", 0x00b5),
+ UCIS_SYM("tm", 0x2122)
 );
 
 bool process_record_user (uint16_t keycode, keyrecord_t *record) {

keyboards/ergodox/keymaps/algernon/tools/hid-commands

@@ -16,7 +16,8 @@ _cmd_appsel () {
 }
 
 cmd_appsel_music () {
-    wmctrl -x -a rhythmbox || wmctrl -x -a spotify || wmctrl -x -a kodi || true
+    wmctrl -x -a rhythmbox || wmctrl -x -a spotify || \
+        wmctrl -x -a banshee || wmctrl -x -a kodi || true
     xdotool key Escape
 }
 
@@ -33,7 +34,7 @@ cmd_appsel_term () {
 }
 
 cmd_appsel_chrome () {
-    _cmd_appsel chromium
+    _cmd_appsel chrom
 }
 
 cmd_appsel_start () {

keyboards/ergodox/keymaps/common-nighthawk/Makefile

@@ -0,0 +1,6 @@
+SUBPROJECT_DEFAULT = ez
+TAP_DANCE_ENABLE = yes
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/ergodox/keymaps/common-nighthawk/keymap.c

@@ -0,0 +1,216 @@
+#include "ergodox.h"
+#include "debug.h"
+#include "action_layer.h"
+#include "version.h"
+
+#define BASE 0 // default layer
+#define SYMB 1 // symbols
+#define MDIA 2 // media keys
+
+//Tap Dance Declarations
+enum {
+  TD_U_LBRC = 0,
+  TD_I_RBRC,
+};
+
+//Tap Dance Definitions
+qk_tap_dance_action_t tap_dance_actions[] = {
+  [TD_U_LBRC] = ACTION_TAP_DANCE_DOUBLE(KC_U, KC_LBRC),
+  [TD_I_RBRC] = ACTION_TAP_DANCE_DOUBLE(KC_I, KC_RBRC)
+};
+
+//Macro Declarations
+static uint16_t sunds_timer;
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap 0: Basic layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |  _     |   x  |   x  |   _  |  Esc | Hypr | Home |           | End  | Hypr |   [  |   ]  |  `~  |  `~  |  Bks   |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |Ctrl/Tab|   Q  |   W  |   E  |   R  |   T  |  Up  |           | PgUp |   Y  |   U  |   I  |   O  |   P  |  Ctrl  |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | Cmd/"' |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |  ;:  |Cmd/Entr|
+ * |--------+------+------+------+------+------| Down |           | PgDn |------+------+------+------+------+--------|
+ * |  Shft  |   Z  |   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |  ,<  |  .>  |  /?  |  Shft  |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   | Alt  |   x  |   x  |   x  | Left |                                       |Right |  Bks |   x  |   x  |  Alt |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |Teensy| VolUp|       | Play |  Del   |
+ *                                 ,------|------|------|       |------+--------+------.
+ *                                 |      |      | VolDn|       | Next |        |      |
+ *                                 |Sp/~L1|  L2  |------|       |------|   L2   |'"/~L1|
+ *                                 |      |      | Mute |       | Prev |        |      |
+ *                                 `--------------------'       `----------------------'
+ */
+[BASE] = KEYMAP(  // layer 0 : default
+        // left hand
+        KC_UNDS,         KC_1,          KC_1,          KC_UNDS,         KC_ESC,   ALL_T(KC_NO),      KC_HOME,
+        CTL_T(KC_TAB),   KC_Q,          KC_W,          KC_E,            KC_R,     KC_T,              KC_UP,
+        M(1),            KC_A,          KC_S,          KC_D,            KC_F,     KC_G,
+        KC_LSFT,         KC_Z,          KC_X,          KC_C,            KC_V,     KC_B,              KC_DOWN,
+        KC_LALT,         KC_1,          KC_1,          KC_1,            KC_LEFT,
+                                                                        RESET,    KC_VOLU,
+                                                                        KC_VOLD,
+                                                                        LT(SYMB, KC_SPC),  TG(MDIA), KC_MUTE,
+        // right hand
+        KC_END,          ALL_T(KC_NO),  KC_LBRC,        KC_RBRC,        KC_GRV,   KC_GRV,            KC_BSPC,
+        KC_PGUP,         KC_Y,          KC_U,           KC_I,           KC_O,     KC_P,              KC_LCTRL,
+                         KC_H,          KC_J,           KC_K,           KC_L,     KC_SCOLON,         GUI_T(KC_ENT),
+        KC_PGDN,         KC_N,          KC_M,           KC_COMM,        KC_DOT,   KC_SLSH,           KC_RSFT,
+                                        KC_RGHT,        KC_BSPC,        KC_1,     KC_1,              KC_RALT,
+        KC_MPLY,         KC_DEL,
+        KC_MNXT,
+        KC_MPRV,         TG(MDIA),      LT(SYMB, KC_QUOT)
+    ),
+/* Keymap 1: Symbol Layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |  F1  |  F2  |  F3  |  F4  |  F5  |      |           |      |  F6  |  F7  |  F8  |  F9  |  F10 |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |   !  |   ^  |   [  |   (  |   {  |      |           |      |   =  |   7  |   8  |   9  |   0  |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   &  |   $  |   ]  |   )  |   }  |------|           |------|   +  |   4  |   5  |   6  |   *  |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   \  |   @  |   #  |   %  |   |  |      |           |      |   -  |   1  |   2  |   3  |   /  |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |   0  |   0  |   .  |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |      |      |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// SYMBOLS
+[SYMB] = KEYMAP(
+       // left hand
+       KC_TRNS,  KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_TRNS,
+       KC_TRNS,  KC_EXLM,  KC_CIRC,  KC_LBRC,  KC_LPRN,  KC_LCBR,  KC_TRNS,
+       KC_TRNS,  KC_AMPR,  KC_DLR,   KC_RBRC,  KC_RPRN,  KC_RCBR,
+       KC_TRNS,  KC_BSLS,  KC_AT,    KC_HASH,  KC_PERC,  KC_PIPE,  KC_TRNS,
+       KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+                                               KC_TRNS,  KC_TRNS,
+                                               KC_TRNS,
+                                               KC_TRNS,  KC_TRNS,  KC_TRNS,
+       // right hand
+       KC_TRNS,  KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_TRNS,
+       KC_TRNS,  KC_EQL,   KC_7,     KC_8,     KC_9,     KC_0,     KC_TRNS,
+                 KC_PLUS,  KC_4,     KC_5,     KC_6,     KC_ASTR,  KC_TRNS,
+       KC_TRNS,  KC_MINS,  KC_1,     KC_2,     KC_3,     KC_TRNS,  KC_TRNS,
+                           KC_0,     KC_0,     KC_DOT,   KC_TRNS,  KC_TRNS,
+       KC_TRNS,  KC_TRNS,
+       KC_TRNS,
+       KC_TRNS,  KC_TRNS,  KC_TRNS
+),
+/* Keymap 2: Media and mouse keys
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |Version |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      | WhDn | WhUp |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      | R-Ck | L-Ck |      |------|           |------| MsLt | MsDn | MsUp | MsRt |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |      |      |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |Brwser|
+ *                                 |      |      |------|       |------|      |Back  |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// MEDIA AND MOUSE
+[MDIA] = KEYMAP(
+       M(0),    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN2, KC_BTN1, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                                           KC_TRNS, KC_TRNS,
+                                                    KC_TRNS,
+                                  KC_TRNS, KC_TRNS, KC_TRNS,
+    // right hand
+       KC_TRNS,  KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_TRNS, KC_TRNS,
+       KC_TRNS,  KC_TRNS,     KC_WH_U,     KC_WH_D,     KC_TRNS,     KC_TRNS, KC_TRNS,
+                 KC_MS_LEFT,  KC_MS_DOWN,  KC_MS_UP,    KC_MS_RIGHT, KC_TRNS, KC_TRNS,
+       KC_TRNS,  KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_TRNS, KC_TRNS,
+                              KC_TRNS,     KC_TRNS,     KC_TRNS,     KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_WBAK
+),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_TAP_TOGGLE(SYMB)                // FN1 - Momentary Layer 1 (Symbols)
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+          if (record->event.pressed) {
+            SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
+          }
+          break;
+
+        case 1:
+          if (record->event.pressed) {
+            sunds_timer = timer_read();
+            register_code (KC_LGUI);
+          } else {
+            if (timer_elapsed (sunds_timer) < TAPPING_TERM) {
+              unregister_code (KC_LGUI);
+              register_code (KC_LSFT);
+              register_code (KC_QUOT);
+              unregister_code (KC_QUOT);
+              unregister_code (KC_LSFT);
+              register_code (KC_LGUI);
+            }
+            unregister_code (KC_LGUI);
+          }
+          break;
+
+      }
+    return MACRO_NONE;
+};
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+
+};
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+
+    uint8_t layer = biton32(layer_state);
+
+    ergodox_board_led_off();
+    ergodox_right_led_1_off();
+    ergodox_right_led_2_off();
+    ergodox_right_led_3_off();
+    switch (layer) {
+      // TODO: Make this relevant to the ErgoDox EZ.
+        case 1:
+            ergodox_right_led_3_on();
+            break;
+        case 2:
+            ergodox_right_led_2_on();
+            break;
+        default:
+            // none
+            break;
+    }
+    if (keyboard_report->mods & MOD_BIT(KC_LSFT)) {
+        ergodox_right_led_1_on ();
+    }
+};

keyboards/ergodox/keymaps/deadcyclo/keymap.c

@@ -0,0 +1,273 @@
+#include "ergodox.h"
+#include "debug.h"
+#include "action_layer.h"
+#include "version.h"
+
+#define BASE 0 // default layer
+#define SYMB 1 // symbols
+#define MDIA 2 // media keys
+#define NAVG 3 // navigation
+
+enum custom_keycodes {
+  PLACEHOLDER = SAFE_RANGE, // can always be here
+  EPRM,
+  VRSN,
+  RGB_SLD
+};
+
+// TODO: Get rid of of keys I don't want. Make others that I do. Set up lots of makros (Using hyper (and meh)) keys (where to put them?)
+// TODO: Need to change hotkeys for lastpass, and potentially make my own keys for them on one of my layers
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap 0: Basic layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * | Esc/L3 |   1  |   2  |   3  |   4  |   5  |  6   |           |   6  |   7  |   8  |   9  |   0  |   -  |   =/L3 |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | Tab/L1 |   Q  |   W  |   E  |   R  |   T  |  L1  |           |  L1  |   Y  |   U  |   I  |   O  |   P  |   \/L1 |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | LCtrl  |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |; / L2| ctrl/'|
+ * |--------+------+------+------+------+------| Hyper|           | Meh  |------+------+------+------+------+--------|
+ * | LShift |Z/Ctrl|   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ,  |   .  |//Ctrl| RShift |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |Grv/L1|  '"  |AltShf| Lalt | Ralt |                                       | Lalt | Ralt |   [  |   ]  | ~/L1 |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        | App  | Home |       | PgUp |  Ins   |
+ *                                 ,------|------|------|       |------+--------+------.
+ *                                 |      |      | End  |       | PgDn |        |      |
+ *                                 | Space|  TAB |------|       |------|  BSPC  |Enter |
+ *                                 |      |      |   [  |       |  ]   |        |      |
+ *                                 `--------------------'       `----------------------'
+ */
+// If it accepts an argument (i.e, is a function), it doesn't need KC_.
+// Otherwise, it needs KC_*
+[BASE] = KEYMAP(  // layer 0 : default
+        // left hand
+		LT(NAVG,KC_ESC),         KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   KC_6,
+        LT(SYMB,KC_TAB),        KC_Q,         KC_W,   KC_E,   KC_R,   KC_T,   TG(SYMB),
+        KC_LCTL,        KC_A,         KC_S,   KC_D,   KC_F,   KC_G,
+        KC_LSFT,        CTL_T(KC_Z),  KC_X,   KC_C,   KC_V,   KC_B,   ALL_T(KC_NO),
+        LT(SYMB,KC_GRV),KC_QUOT,      LALT(KC_LSFT),  KC_RALT,KC_LALT,
+                                              ALT_T(KC_APP),  KC_HOME,
+                                                              KC_END,
+                                               KC_SPC,KC_TAB,KC_LBRC,
+        // right hand
+		KC_6,     KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,             LT(NAVG,KC_EQL),
+	TG(SYMB),    KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,             LT(SYMB, KC_BSLS),
+	KC_H,   KC_J,   KC_K,   KC_L,   LT(MDIA, KC_SCLN),CTL_T(KC_QUOT),
+             MEH_T(KC_NO),KC_N,   KC_M,   KC_COMM,KC_DOT, CTL_T(KC_SLSH),   KC_RSFT,
+		KC_LALT,  KC_RALT,KC_LBRC,KC_RBRC,          LT(SYMB,KC_TILD),
+             KC_PGUP,        KC_INS,
+             KC_PGDN,
+             KC_RBRC,KC_BSPC, KC_ENT
+    ),
+/* Keymap 1: Symbol Layer
+ *                                                  
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |           |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |   F12  |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |   !  |   @  |   {  |   }  |   |  |      |           |      |   Up |   7  |   8  |   9  |   *  |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   #  |   $  |   (  |   )  |   `  |------|           |------| Down |   4  |   5  |   6  |   +  |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   %  |   ^  |   [  |   ]  |   ~  |      |           |      |   &  |   1  |   2  |   3  |   \  |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |    . |   0  |   =  |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |      |      |------|       |------| DEL  |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// SYMBOLS
+[SYMB] = KEYMAP(
+       // left hand
+       KC_TRNS,KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,
+       KC_TRNS,KC_EXLM,KC_AT,  KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS,
+       KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV,
+       KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS,
+       KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+                                       KC_TRNS,KC_TRNS,
+                                               KC_TRNS,
+                               KC_TRNS,KC_TRNS,KC_TRNS,
+       // right hand
+       KC_F6, KC_F7,   KC_F8,  KC_F9,   KC_F10,   KC_F11,  KC_F12,
+       KC_TRNS, KC_UP,   KC_7,   KC_8,    KC_9,    KC_ASTR, KC_TRNS,
+                KC_DOWN, KC_4,   KC_5,    KC_6,    KC_PLUS, KC_TRNS,
+       KC_TRNS, KC_AMPR, KC_1,   KC_2,    KC_3,    KC_BSLS, KC_TRNS,
+                         KC_TRNS,KC_DOT,  KC_0,    KC_EQL,  KC_TRNS,
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_DEL, KC_TRNS
+),
+/* Keymap 2: Media and mouse keys
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |      |      | MsUp |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |MsLeft|MsDown|MsRght|      |------|           |------|      |      |      |      |      |  Play  |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      | Prev | Next |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      | Lclk | Rclk |                                       |VolUp |VolDn | Mute |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |Brwser|
+ *                                 |      |      |------|       |------|      |Back  |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// MEDIA AND MOUSE
+[MDIA] = KEYMAP(
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2,
+                                           KC_TRNS, KC_TRNS,
+                                                    KC_TRNS,
+                                  KC_TRNS, KC_TRNS, KC_TRNS,
+    // right hand
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                 KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS,
+                          KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_WBAK
+),
+
+/* Keymap 3: Navigation TODO: Printscreen, pg up down, home, end, others? Insert for example
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        | VER  |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |      |      |  up  |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      | left | down | right|      |------|           |------|      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |      |      |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |      |      |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// NAVIGATION
+[NAVG] = KEYMAP(
+       KC_TRNS, VRSN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                                           KC_TRNS, KC_TRNS,
+                                                    KC_TRNS,
+                                  KC_TRNS, KC_TRNS, KC_TRNS,
+    // right hand
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                 KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_MPRV, KC_TRNS, KC_TRNS, KC_TRNS,
+                          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS
+),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_TAP_TOGGLE(SYMB)                // FN1 - Momentary Layer 1 (Symbols)
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+        if (record->event.pressed) {
+          SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
+        }
+        break;
+        case 1:
+        if (record->event.pressed) { // For resetting EEPROM
+          eeconfig_init();
+        }
+        break;
+      }
+    return MACRO_NONE;
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    // dynamically generate these.
+    case EPRM:
+      if (record->event.pressed) {
+        eeconfig_init();
+      }
+      return false;
+      break;
+    case VRSN:
+      if (record->event.pressed) {
+        SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
+      }
+      return false;
+      break;
+    case RGB_SLD:
+      if (record->event.pressed) {
+        #ifdef RGBLIGHT_ENABLE
+          rgblight_mode(1);
+        #endif
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+
+};
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+
+    uint8_t layer = biton32(layer_state);
+
+    ergodox_board_led_off();
+    ergodox_right_led_1_off();
+    ergodox_right_led_2_off();
+    ergodox_right_led_3_off();
+    switch (layer) {
+    case 1:
+      ergodox_right_led_1_on();
+      break;
+    case 2:
+      ergodox_right_led_2_on();
+      break;
+    case 3:
+      ergodox_right_led_3_on();
+      break;
+    case 4:
+      ergodox_right_led_1_on(); // TODO: Make a fourth layer
+      ergodox_right_led_3_on();
+      break;
+    default:
+      // none
+      break;
+    }
+
+};

keyboards/ergodox/keymaps/deadcyclo/readme.md

@@ -0,0 +1,10 @@
+# ErgoDox EZ 1337 configuration
+
+Custom layout based on the default layout. Intended for interational users of us intl-altgr layout. Note that
+some common keys might be missing, as this layout is intented to be used on *nix systems by users familiar
+with their system. The layout is geared towards avoiding using the rat (mouse for those of you who are
+unfamiliar with tiling window managers) as much as possibly.
+
+# Changelog
+
+- 02.01.2017 Added delete key on second layer

keyboards/ergodox/keymaps/default/readme.md

@@ -2,6 +2,9 @@
 
 ## Changelog
 
+* Dec 2016:
+  * Added LED keys
+  * Refreshed layout graphic, comes from http://configure.ergodox-ez.com now.
 * Sep 22, 2016:
   * Created a new key in layer 1 (bottom-corner key) that resets the EEPROM.
 * Feb 2, 2016 (V1.1): 
@@ -9,4 +12,4 @@
 
 This is what we ship with out of the factory. :) The image says it all:
 
-![Default](default_highres.png)
+![Default](default_firmware_v1.2-2.png)

keyboards/ergodox/keymaps/ishigoya-jp/keymap.c

@@ -0,0 +1,962 @@
+#include "ergodox.h"
+#include "debug.h"
+#include "action_layer.h"
+#include "keymap_jp.h"
+
+static uint16_t start;
+
+#define BASE 0 // EN layer
+#define JP 1 // Japanese
+#define JPXON 2 // JP + Fn
+#define JPKAZARI 3 // JP + KAZARI
+#define JPTOPROW 4 // JP + TOPROW
+#define JPTRKZ 5 // JP + TOPROW + KAZARI
+#define NUM 6 // Numbers
+
+#define CTLSHFT 1
+#define CUTCOPY 2
+
+//kana macro definitions start here
+
+#define JPVU 4
+#define JPNU 6
+#define JPKO 7
+#define JPSA 8
+#define JPKE 9
+#define JPHE 10
+#define JPSHI 11
+#define JPKA 12
+#define JPKI 13
+#define JPSU 14
+#define JPSO 15
+#define JPHI 16
+#define JPCHI 17
+#define JPFU 18
+#define JPSE 19
+#define JPTSU 20
+#define JPKU 21
+#define JPTE 22
+#define JPTA 23
+#define JPTO 24
+#define JPHA 25
+#define JPHO 26
+#define JPXKE 27
+#define JPXU 28
+#define JPXKA 29
+#define JPXA 30
+#define JPXO 31
+#define JPGO 32
+#define JPZA 33
+#define JPGE 34
+#define JPBE 35
+#define JPYU 36
+#define JPJI 37
+#define JPGA 38
+#define JPGI 39
+#define JPZU 40
+#define JPZO 41
+#define JPBI 42
+#define JPDI 43
+#define JPZE 44
+#define JPDU 45
+#define JPGU 46
+#define JPYA 47
+#define JPYO 48
+#define JPDE 49
+#define JPDA 50
+#define JPDO 51
+#define JPBA 52
+#define JPBO 53
+#define JPRI 54
+#define JPRE 55
+#define JPRA 56
+#define JPNA 57
+#define JPNO 58
+#define JPMI 59
+#define JPMU 60
+#define JPME 61
+#define JPNE 62
+#define JPMA 63
+#define JPXTU 64
+#define JPWA 65
+#define JPRU 66
+#define JPWO 67
+#define JPNI 68
+#define JPNN 69
+#define JPMO 70
+#define JPRO 71
+#define JPXE 72
+#define JPXI 73
+#define JPXYU 74
+#define JPXYA 75
+#define JPXYO 76
+#define JPPE 77
+#define JPPU 78
+#define JPPI 79
+#define JPPA 80
+#define JPPO 81
+#define JPBU 82
+
+// kana macro definitions end here
+
+#define SHIFT 86
+#define KAZARI 87
+#define JPFN 88 //shifts to JPXON layer
+#define TOJPLOUT 89
+#define TOENL 90
+#define TOJPL 91
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap 0: Basic layer
+ *
+ * 
+ * ,----------------------------------------------------.           ,--------------------------------------------------.
+ * | En / 和  |      |   ^  |   %  |      |      |Selall|           | Undo |      |   $  |   @  |   LT |  UP  |   RT   |
+ * |----------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | Tab      |   Q  |   D  |   R  |   W  |   B  | Cut  |           | PgUP |   J  |   F  |   U  |   P  |  DN  |   \    |
+ * |----------+------+------+------+------+------| Copy |           |      |------+------+------+------+------+--------|
+ * |   /      |   A  |   S  |   H  |   T  |   G  |------|           |------|   Y  |   N  |   E  |   O  |   I  |   ,    |
+ * |----------+------+------+------+------+------|Paste |           | PgDN |------+------+------+------+------+--------|
+ * | Ctl+Shft |   Z  |   X  |   M  |   C  |   V  |      |           |      | .    |   L  |   K  |  '   |   ?  | tmux   |
+ * `----------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   | LCtrl  | LGui |   Alt|   _  | Esc  |                                       |MouseL|MouseR|   -  |  ~   | Ctrl |
+ *   `------------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |MidMs | Del  |       | VolUp| Mute |
+ *                                 ,------|------|------|       |------+--------+------.
+ *                                 |      |      |      |       | VolDn|        |      |
+ *                                 | Space| Shift|------|       |------| Backsp |Enter |
+ *                                 |      |      | Num  |       |  Esc |        |      |
+ *                                 `--------------------'       `----------------------'
+ *
+ * 
+ * tmux prefix set to C-b
+ * 
+ */
+// If it accepts an argument (i.e, is a function), it doesn't need KC_.
+// Otherwise, it needs KC_*
+[BASE] = KEYMAP(  // layer 0 : default
+        // left hand
+        M(TOJPLOUT),   KC_NO,   KC_EQL, LSFT(KC_5), KC_NO,   KC_NO,   LCTL(KC_A),
+        KC_TAB,        KC_Q,         KC_D,   KC_R,   KC_W,   KC_B,   M(CUTCOPY),
+        KC_SLSH,       KC_A,         KC_S,   KC_H,   KC_T,   KC_G,
+        M(CTLSHFT),    KC_Z,         KC_X,   KC_M,   KC_C,   KC_V,   LCTL(KC_V),
+        KC_RCTL,       KC_LGUI,      KC_LALT,JP_UNDS,KC_LCTL,
+                                              KC_BTN3,  KC_DEL,
+                                                              KC_NO,
+                                               KC_SPC,KC_LSFT,F(1),
+        // right hand
+             LCTL(KC_Z), KC_NO, LSFT(KC_4),      JP_AT,   KC_LEFT,       KC_UP,   KC_RIGHT,
+             KC_PGUP,    KC_J,       KC_F,       KC_U,       KC_P,       KC_DOWN, LSFT(KC_3),
+                         KC_Y,       KC_N,       KC_E,       KC_O,       KC_I,    KC_COMMA,
+             KC_PGDN, KC_DOT,     KC_L,       KC_K,       LSFT(KC_7), KC_QUES,   LCTL(KC_B),
+                                  KC_BTN1,  KC_BTN2,KC_MINS,JP_TILD,          KC_RCTL,
+             KC_VOLU,        KC_MUTE,
+             KC_VOLD,
+             KC_SPC,KC_BSLS, KC_ENT
+    ),
+/* Keymap 1: Japanese
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * | En / 和|      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        | 　 nu |  ko  |   sa |  he  |  ke  |      |           |      |  fu  |  se  | tsu  | ku   |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   to |  shi |  ka  |  ki  |  su  |------|           |------|  a   |  ha  | te   | ta   |  u   |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   mu |  so  |  hi  |  chi |  me  |      |           |      |      |  ma  |  ho  |  i   |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |      |      |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 | shift|  fn  |------|       |------|      |kazari|
+ *                                 |      |      | Num  |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ * 
+ * 
+ * 
+ */
+[JP] = KEYMAP(
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, M(JPNU), M(JPKO), M(JPSA), M(JPHE), M(JPKE), KC_TRNS,
+       KC_TRNS, M(JPTO), M(JPSHI), M(JPKA), M(JPKI), M(JPSU),
+       KC_TRNS, M(JPMU), M(JPSO), M(JPHI), M(JPCHI), M(JPME), KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                                           KC_TRNS, KC_TRNS,
+                                                    KC_NO,
+                                  M(SHIFT), M(JPFN), F(1),
+    // right hand
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS,  M(JPFU), M(JPSE), M(JPTSU), M(JPKU), KC_TRNS, KC_TRNS,
+                 KC_A, M(JPHA), M(JPTE), M(JPTA), KC_U, KC_TRNS,
+       KC_TRNS,  KC_TRNS, M(JPMA), M(JPHO), KC_I, KC_TRNS, KC_TRNS,
+                          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+             KC_TRNS,        KC_TRNS,
+             KC_TRNS,
+             KC_TRNS,KC_TRNS,M(KAZARI)
+),
+/* Keymap 2: Japanese with Fn
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        | 　    |  xe  |      |      |  xke |      |           |      |  xya |      | xtsu |  xo  |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |  xka |      |      |------|           |------|  xa  | xyo  |      |      |  xu  |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      |      |  xi  |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |      |      |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |      |      |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ * 
+ * 
+ * 
+ */
+[JPXON] = KEYMAP(
+	   KC_NO, KC_NO,    KC_NO,        KC_NO,    KC_NO, KC_NO, KC_NO,
+	   KC_NO, KC_NO,    M(JPXE),        KC_NO,    M(JPXKE),   KC_NO, KC_NO,
+       KC_NO, KC_NO,    KC_NO,          M(JPXKA),      KC_NO, KC_NO, 
+       KC_NO, KC_NO,    KC_NO,        KC_NO,    KC_NO, KC_NO, KC_NO,
+       KC_TRNS, KC_NO,    KC_NO,        KC_NO,    KC_NO,
+                                           KC_NO, KC_NO,
+                                                    KC_NO,
+                                  KC_NO, KC_TRNS, KC_TRNS,
+    // right hand
+	   KC_NO,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+       KC_NO,  M(JPXYA), KC_NO, M(JPXTU), M(JPXO), KC_NO, KC_NO,
+                 M(JPXA), M(JPXYO), M(JPXYU), KC_NO, M(JPXU), KC_NO,
+       KC_NO,  KC_NO,KC_NO, KC_NO, M(JPXI), KC_NO, KC_NO,
+                          KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+       KC_NO, KC_NO,
+       KC_NO,
+       KC_NO, KC_NO, KC_NO
+),
+/* Keymap 3: Japanese with kazari
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        | 　    |  go  |  za  |  be  |  ge  |      |           |      |  bu  |  ze  |  du  |  gu  |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |  do  |  ji  |  ga  |  gi  |  zu  |------|           |------|      |  ba  |  de  |  da  |  vu  |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |  zo  |  bi  |  di  |      |      |           |      |      |      |  bo  |      |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |      |      |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |      |      |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ * 
+ * 
+ * 
+ */
+[JPKAZARI] = KEYMAP(
+	   KC_NO, KC_NO,    KC_NO,        KC_NO,    KC_NO, KC_NO, KC_NO,
+	   KC_NO, KC_NO,    M(JPGO),        M(JPZA),    M(JPBE), M(JPGE), KC_NO,
+       KC_NO, M(JPDO),    M(JPJI),        M(JPGA),    M(JPGI), M(JPZU), 
+       KC_NO, KC_NO,    M(JPZO),        M(JPBI),    M(JPDI), KC_NO, KC_NO,
+       KC_TRNS, KC_NO,    KC_NO,        KC_NO,    KC_NO,
+                                           KC_NO, KC_NO,
+                                                    KC_NO,
+                                  M(SHIFT), KC_NO, KC_TRNS,
+    // right hand
+	   KC_NO,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+       KC_NO,  M(JPBU), M(JPZE), M(JPDU), M(JPGU), KC_NO, KC_NO,
+                 KC_NO, M(JPBA), M(JPDE), M(JPDA), M(JPVU), KC_NO,
+       KC_NO,  KC_NO, KC_NO, M(JPBO), KC_NO, KC_NO, KC_NO,
+                          KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+       KC_NO, KC_NO,
+       KC_NO,
+       KC_NO, KC_NO, KC_TRNS
+),
+/* Keymap 4: Japanese with Toprow
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        | 　    |  e   |  -   | re   |      |      |           |      |  ya  | ne   |  ru  | o    |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        | ra   |  ri  | na   | no   | mi   |------|           |------| wa   |  yo  | yu   | ni   | nn   |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      | mo   | ro   |  wo  |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |      |      |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |      |      |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ * 
+ * 
+ * 
+ */
+[JPTOPROW] = KEYMAP(
+	   KC_NO, KC_NO,    KC_NO,        KC_NO,    KC_NO,   KC_NO, KC_NO,
+	   KC_NO, KC_NO,    KC_E,       KC_MINS,  M(JPRE), KC_NO, KC_NO,
+       KC_NO, M(JPRA),  M(JPRI),       M(JPNA),  M(JPNO), M(JPMI), 
+       KC_NO, KC_NO, KC_NO,    KC_NO,  KC_NO, KC_NO, KC_NO,
+       KC_TRNS, KC_NO,    KC_NO,        KC_NO,    KC_NO,
+                                           KC_NO, KC_NO,
+                                                    KC_NO,
+                                  KC_TRNS, KC_NO, KC_NO,
+    // right hand
+	   KC_NO,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+       KC_NO,  M(JPYA), M(JPNE), M(JPRU), KC_O, KC_NO, KC_NO,
+                 M(JPWA), M(JPYO), M(JPYU), M(JPNI), M(JPNN), KC_NO,
+       KC_NO,  KC_NO, M(JPMO), M(JPRO), M(JPWO), KC_NO, KC_NO,
+                          KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+       KC_NO, KC_NO,
+       KC_NO,
+       KC_NO, KC_NO, M(KAZARI)
+),
+
+/* Keymap 5: Japanese with Toprow and Kazari
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        | 　    |      |      |  pe  |      |      |           |      |  pu  |      |      |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |------|           |------|      |  pa  |      |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |  pi  |      |      |      |           |      |      |      |  po  |      |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |      |      |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |      |      |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ * 
+ * 
+ * 
+ */
+[JPTRKZ] = KEYMAP(
+	   KC_NO, KC_NO,    KC_NO,        KC_NO,    KC_NO, KC_NO, KC_NO,
+	   KC_NO, KC_NO,    KC_NO,        KC_NO,    M(JPPE),KC_NO,  KC_NO,
+       KC_NO, KC_NO,    KC_NO,        KC_NO,    KC_NO, KC_NO, 
+       KC_NO, KC_NO,    KC_NO,        M(JPPI),    KC_NO, KC_NO, KC_NO,
+       KC_TRNS, KC_NO,    KC_NO,        KC_NO,    KC_NO,
+                                           KC_NO, KC_NO,
+                                                    KC_NO,
+                                  KC_TRNS, KC_NO, KC_NO,
+    // right hand
+	   KC_NO,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+       KC_NO,  M(JPPU), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+                 KC_NO, M(JPPA), KC_NO, KC_NO, KC_NO, KC_NO,
+       KC_NO,  KC_NO, KC_NO, M(JPPO), KC_NO, KC_NO, KC_NO,
+                          KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+       KC_NO, KC_NO,
+       KC_NO,
+       KC_NO, KC_NO, KC_TRNS
+),
+/* Keymap 6: Number Layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |  F1  |  F2  |  F3  |  F4  |  F5  |      |           |      |  F6  |  F7  |  F8  |  F9  |  F10 |   F11  |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |      |      |   "  |   [  |   ]  |      |           |   |  |   %  |   7  |   8  |   9  |      |   F12  |
+ * |--------+------+------+------+------+------|   ;  |           |      |------+------+------+------+------+--------|
+ * |        |      |   /  |   +  |   {  |   }  |------|           |------|   !  |   4  |   5  |   6  |   0  |   ,    |
+ * |--------+------+------+------+------+------|   :  |           |   &  |------+------+------+------+------+--------|
+ * |        |      |   *  |   -  |   (  |   )  |      |           |      |   .  |   1  |   2  |   3  |   ?  |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |   #  |                                       |   <  |   =  |   >  |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |      |      |------|       |------| Back |  Ent |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// Numbers
+[NUM] = KEYMAP(
+       // left hand
+	   KC_NO, KC_F1,      KC_F2,          KC_F3,      KC_F4,   KC_F5,   KC_NO,
+	   KC_NO, KC_NO,    KC_NO,        JP_DQT,    KC_RBRACKET,   KC_BSPC, KC_SCLN,
+       KC_NO, KC_NO,    KC_SLSH,        JP_PLUS,    LSFT(KC_RBRACKET),   JP_RCBR, 
+       KC_NO, KC_NO,    JP_ASTR,        KC_MINS,    LSFT(KC_8), LSFT(KC_9), JP_COLN,
+       KC_TRNS, KC_NO,    KC_NO,        KC_NO,    KC_HASH,
+                                           KC_NO, KC_NO,
+                                                    KC_NO,
+                                  KC_NO, KC_NO, KC_TRNS,
+       // right hand
+       KC_NO, KC_F6,   KC_F7,  KC_F8,   KC_F9,   KC_F10,  KC_F11,
+       LSFT(KC_JYEN), KC_PERC,   KC_7,   KC_8,    KC_9,    KC_NO, KC_F12,
+                KC_EXLM, KC_4,   KC_5,    KC_6,    KC_0, KC_COMM,
+       LSFT(KC_6), KC_DOT, KC_1,   KC_2,    KC_3,    KC_QUES, KC_NO,
+                         KC_LT,JP_EQL,  KC_GT,    KC_NO,  KC_NO,
+       KC_NO, KC_NO,
+       KC_NO,
+       KC_SPC, KC_BSLS, KC_DOT
+),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_MOMENTARY(NUM)                // FN1 - Momentary Layer 6 (Numbers)
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+	
+  // MACRO only works in this function
+	switch(id) {
+		case 0:
+			if (record->event.pressed) {
+				register_code(KC_RSFT);
+			} else {
+				unregister_code(KC_RSFT);
+			}
+			break;
+		case CTLSHFT:
+			if (record->event.pressed) {
+				return MACRO( D(LSFT), D(LCTL), END);
+			} else {
+				return MACRO( U(LSFT), U(LCTL), END);
+			}
+			break;
+		case CUTCOPY:
+			if (record->event.pressed) {
+				start = timer_read();
+			} else {
+				if (timer_elapsed(start) > 150) {
+					return MACRO( D(LCTL), T(X), U(LCTL), END);
+				} else {
+					return MACRO( D(LCTL), T(C), U(LCTL), END);
+				}
+			}
+			break;
+			
+		// kana macros start here
+			
+		case JPVU:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(V), T(U), END);
+			}
+			break;
+		case JPNU:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(N), T(U), END);
+			}
+			break;
+		case JPKO:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(K), T(O), END);
+			}
+			break;
+		case JPSA:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(S), T(A), END);
+			}
+			break;
+		case JPKE:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(K), T(E), END);
+			}
+			break;
+		case JPHE:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(H), T(E), END);
+			}
+			break;
+		case JPSHI:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(S), T(I), END);
+			}
+			break;
+			case JPKA:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(K), T(A), END);
+			}
+			break;
+		case JPKI:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(K), T(I), END);
+			}
+			break;
+		case JPSU:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(S), T(U), END);
+			}
+			break;
+		case JPSO:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(S), T(O), END);
+			}
+			break;
+		case JPHI:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(H), T(I), END);
+			}
+			break;
+		case JPCHI:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(T), T(I), END);
+			}
+			break;
+		case JPFU:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(F), T(U), END);
+			}
+			break;
+		case JPSE:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(S), T(E), END);
+			}
+			break;
+		case JPTSU:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(T), T(U), END);
+			}
+			break;
+		case JPKU:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(K), T(U), END);
+			}
+			break;
+		case JPTE:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(T), T(E), END);
+			}
+			break;
+		case JPTA:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(T), T(A), END);
+			}
+			break;
+		case JPTO:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(T), T(O), END);
+			}
+			break;
+		case JPHA:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(H), T(A), END);
+			}
+			break;
+		case JPHO:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(H), T(O), END);
+			}
+			break;
+		case JPXKE:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(X), T(K), T(E), END);
+			}
+			break;
+		case JPXU:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(X), T(U), END);
+			}
+			break;
+		case JPXKA:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(X), T(K), T(A), END);
+			}
+			break;
+		case JPXA:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(X), T(A), END);
+			}
+			break;
+		case JPXO:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(X), T(O), END);
+			}
+			break;
+		case JPGO:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(G), T(O), END);
+			}
+			break;
+		case JPZA:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(Z), T(A), END);
+			}
+			break;
+		case JPGE:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(G), T(E), END);
+			}
+			break;
+		case JPBE:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(B), T(E), END);
+			}
+			break;
+		case JPYU:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(Y), T(U), END);
+			}
+			break;
+		case JPJI:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(J), T(I), END);
+			}
+			break;
+		case JPGA:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(G), T(A), END);
+			}
+			break;
+		case JPGI:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(G), T(I), END);
+			}
+			break;
+		case JPZU:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(Z), T(U), END);
+			}
+			break;
+		case JPZO:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(Z), T(O), END);
+			}
+			break;
+		case JPBI:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(B), T(I), END);
+			}
+			break;
+		case JPDI:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(D), T(I), END);
+			} 
+			break;
+		case JPZE:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(Z), T(E), END);
+			}
+			break;
+		case JPDU:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(D), T(U), END);
+			}
+			break;
+		case JPGU:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(G), T(U), END);
+			}
+			break;
+		case JPYA:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(Y), T(A), END);
+			}
+			break;
+		case JPYO:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(Y), T(O), END);
+			}
+			break;
+		case JPDE:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(D), T(E), END);
+			}
+			break;
+		case JPDA:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(D), T(A), END);
+			}
+			break;
+		case JPDO:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(D), T(O), END);
+			}
+			break;
+		case JPBA:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(B), T(A), END);
+			}
+			break;
+		case JPBO:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(B), T(O), END);
+			}
+			break;
+		case JPRI:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(R), T(I), END);
+			}
+			break;
+		case JPRE:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(R), T(E), END);
+			}
+			break;
+		case JPRA:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(R), T(A), END);
+			}
+			break;
+		case JPNA:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(N), T(A), END);
+			}
+			break;
+		case JPNO:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(N), T(O), END);
+			}
+			break;
+		case JPMI:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(M), T(I), END);
+			}
+			break;
+		case JPMU:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(M), T(U), END);
+			}
+			break;
+		case JPME:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(M), T(E), END);
+			}
+			break;
+		case JPNE:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(N), T(E), END);
+			}
+			break;
+		case JPMA:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(M), T(A), END);
+			}
+			break;
+		case JPXTU:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(X), T(T), T(U), END);
+			}
+			break;
+		case JPWA:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(W), T(A), END);
+			}
+			break;
+		case JPRU:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(R), T(U), END);
+			}
+			break;
+		case JPWO:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(W), T(O), END);
+			}
+			break;
+		case JPNI:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(N), T(I), END);
+			}
+			break;
+		case JPNN:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(N), T(N), END);
+			}
+			break;
+		case JPMO:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(M), T(O), END);
+			}
+			break;
+		case JPRO:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(R), T(O), END);
+			}
+			break;
+		case JPXE:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(X), T(E), END);
+			}
+			break;
+		case JPXI:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(X), T(I), END);
+			}
+			break;
+		case JPXYU:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(X), T(Y), T(U), END);
+			}
+			break;
+		case JPXYA:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(X), T(Y), T(A), END);
+			}
+			break;
+		case JPXYO:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(X), T(Y), T(O), END);
+			}
+			break;
+		case JPPE:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(P), T(E), END);
+			}
+			break;
+		case JPPU:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(P), T(U), END);
+			}
+			break;
+		case JPPI:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(P), T(I), END);
+			}
+			break;
+		case JPPA:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(P), T(A), END);
+			}
+			break;
+		case JPPO:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(P), T(O), END);
+			}
+			break;
+		case JPBU:
+			if (record->event.pressed) {
+				return MACRO( I(1), T(B), T(U), END);
+			}
+			break;
+			
+			// kana macros end here
+			
+			break;
+		case SHIFT:
+		if (record->event.pressed) {
+			start = timer_read();
+			if (layer_state == (1<<JPKAZARI)) {
+				layer_state = (1<<JPTOPROW)| (1<<JPTRKZ);
+			} else {
+				layer_state = (1<<JPTOPROW);							
+			} 
+      } else {
+			layer_state = (0<<JPTOPROW);
+			clear_keyboard_but_mods();
+			if (timer_elapsed(start) < 100) {
+				return MACRO( I(1), T(SPC), END);
+			}
+      }
+      break;
+		case KAZARI:
+		if (record->event.pressed) {
+			start = timer_read();
+			if (layer_state == (1<<JPTOPROW)) {
+				layer_state = (1<<JPKAZARI)| (1<<JPTRKZ);
+			} else {
+				layer_state = (1<<JPKAZARI);							
+			} 
+			break;
+      } else {
+		  	layer_state = (0<<JPKAZARI);
+			layer_state = (0<<JPTRKZ);
+		if (timer_elapsed(start) < 100) {
+          return MACRO( T(ENTER), END);
+        }
+      }
+      break;  
+		case JPFN:
+			if (record->event.pressed) {
+				start = timer_read();
+				layer_state = (1<<JPXON);
+			} else {
+				layer_state = (0<<JPXON);
+				if (timer_elapsed(start) < 100) {
+					return MACRO( T(F7), END);
+				}
+			}
+      break;
+		case TOJPLOUT:
+			if (record->event.pressed) {
+				if (default_layer_state == (1<<JP)) {
+					default_layer_state = (0<<JP);
+				} else {
+					default_layer_state = (1<<JP);
+				}
+				return MACRO( T(ZKHK), END);
+			}
+			break;
+/*
+		// TOJPL and TOENL switch keyboard language.
+		// The Ctrl+[] commands here load the appropriate ibus-anthy input engine via a WM shortcut
+		// The first key pressed in the new engine is missed, thus the space key
+		// TOJPLOUT works in the same way but is used for switching engines on external systems.
+		case TOJPL:
+			if (record->event.pressed) {
+				default_layer_state = (1<<JP);
+				return MACRO( D(LCTL), T(END), U(LCTL), END);
+				//return MACRO( D(LCTL), T(END), U(LCTL), W(250), W(250), W(250), T(SPACE), END);
+			}
+			break;
+		case TOENL:
+			if (record->event.pressed) {
+				default_layer_state = (1<<BASE);
+				return MACRO( D(LCTL), T(HOME), U(LCTL), END);
+			//return MACRO( D(LCTL), T(HOME), U(LCTL), W(250), W(250), W(250), T(SPACE), END);
+			}
+			break;
+*/
+		}
+    return MACRO_NONE;   
+};
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+};
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+
+	uint8_t layer = biton32(layer_state);
+   uint8_t deflayer = biton32(default_layer_state);
+
+	ergodox_board_led_off();
+	ergodox_right_led_1_off();
+	ergodox_right_led_2_off();
+	ergodox_right_led_3_off();
+    
+  
+	switch (layer) {
+		case 0:
+			//none
+			break;
+//		case 1:
+//			ergodox_right_led_2_on();
+//			break;
+		case 6:
+			ergodox_right_led_3_on();
+			break;
+    }
+    switch (deflayer) {
+		 case 0:
+		 ergodox_right_led_1_off();
+		 break;
+		 case 1:
+		 ergodox_right_led_1_on();
+		 break;
+	}
+};

keyboards/ergodox/keymaps/ishigoya-jp/readme.md

@@ -0,0 +1,54 @@
+This is a dual English-Japanese keymap that utilises a thumb-shift system for Japanese input. You can read more about this layout on my blog [here](https://ishigoya.com). 
+
+### Some Editing Necessary
+The system I created this on is a Chromebook, and uses a Japanese keymap, so some of the key mappings may not be the same as those on your system. In particular, the Escape key on layer 0 is mapped to KC_LCTL.
+
+### Layouts
+------
+#### English layer - layer 0
+The English layout is a modified Workman layout, and is pictured below:
+
+![English layout](img/keyboard-layout-enL.png)
+
+Some of the punctuation keys have been moved to a separate number/symbol layer.
+
+#### Number / Symbol layer - layer 6
+
+The Number / Symbol layer is reachable through a ACTION_LAYER_MOMENTARY function. The blue LED is illuminated when this layer is active. It is accessible from the English or Japanese layers.
+
+![Number layout](img/keyboard-layout-numL.png)
+
+#### Japanese layers - layers 1-5
+
+There are 5 layers involved in Japanese input. The TOJPLOUT macro is mapped to the En / 和 button, and switches default layer between layer 0 (English) and 1 (main Japanese layer). When layer 1 is the default layer, the red LED is on. It also outputs the ZKHK button to change the input method language.
+
+On keypress, strings of romaji characters are output by the keyboard using macros, and these simulate the input of individual keys on a latin keyboard.
+
+![Japanese layout](img/keyboard-layout-jpL.png)
+
+Layer 1 is the JP layer. Keys on this layer correspond to singleton keys, or keys on the bottom row where a key is shared. For example, pressing the "ふ や" key outputs `ふ` (or "fu").
+
+Layer 2 is the JPXON layer, and is active while holding the Fn key. This prints keys that are prefaced by "x" when writing in romaji. For example, pressing the "ふ や" key while holding the Fn key outputs `ゃ` (or "xya").
+
+Layer 3 is the JPKAZARI layer, and is active while holding the 飾り key. This provides letters with dakuten. For example, pressing the "ふ や" key while holding the 飾り key outputs `ぶ` (or "bu").
+
+Layer 4 is the JPTOPROW layer, and is active while holding the シフト key. Keys on this line correspond to top row keys on shared keys in the image. For example, pressing the "ふ や" key while holding the シフト key outputs `や` (or "ya").
+
+Layer 5 is the JPTRKZ layer, and is active while holding both the シフト key and the 飾り key. This layer contains handakuten keys. For example, pressing the "ふ や" while holding both the シフト key and the 飾り key outputs `ぷ` (or "pu").
+
+I've also separated out the #define sections and the macros required for kana for easy copying, in case anyone else should wish to make a kana-based layout.
+
+When tapped, the シフト key acts as a space key, and the 飾り key acts as a return key. This allows them to function as 変換 and 無変換, respectively, in many IMEs.
+
+Furthermore the Fn key, when tapped, acts as an F7 key, providing easy switching to katakana in many IMEs.
+
+### Other features
+The cut/copy button gives copy functionality on a short press, and cut functionality on a long press.
+
+The tmux prefix button outputs Control-B.
+
+The Control & Shift key acts as holding the control and shift keys at the same time.
+
+SelAll outputs Control-A.
+
+Undo outputs Control-Z.

keyboards/ergodox/keymaps/pvinis/keymap.c

@@ -45,7 +45,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
  * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
  * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |      |      |      |      |      |                                       |      |      |      |      |      |
+ *   |      |      |      |      |      |                                       |SYSCTL|      |      |      |      |
  *   `----------------------------------'                                       `----------------------------------'
  *                                        ,-------------.       ,-------------.
  *                                        |BEGIN |QWERTY|       |      |      |
@@ -66,11 +66,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                                                                       ,TG(MOUSE)
                                                   ,KC_BSPC  ,KC_LSFT  ,TD(TD_LAYR)
 
-                ,KC_NO    ,KC_NO  ,KC_NO  ,KC_NO  ,KC_NO  ,KC_NO    ,KC_NO
-                ,KC_NO    ,KC_NO  ,KC_NO  ,KC_NO  ,KC_NO  ,KC_NO    ,KC_NO
-                          ,KC_NO  ,KC_NO  ,KC_NO  ,KC_NO  ,KC_NO    ,KC_NO
-                ,KC_NO    ,KC_NO  ,KC_NO  ,KC_NO  ,KC_NO  ,KC_NO    ,KC_NO
-                                  ,KC_NO  ,KC_NO  ,KC_NO  ,KC_NO    ,KC_NO
+                ,KC_NO    ,KC_NO  ,KC_NO       ,KC_NO  ,KC_NO  ,KC_NO    ,KC_NO
+                ,KC_NO    ,KC_NO  ,KC_NO       ,KC_NO  ,KC_NO  ,KC_NO    ,KC_NO
+                          ,KC_NO  ,KC_NO       ,KC_NO  ,KC_NO  ,KC_NO    ,KC_NO
+                ,KC_NO    ,KC_NO  ,KC_NO       ,KC_NO  ,KC_NO  ,KC_NO    ,KC_NO
+                                  ,MO(SYSCTL)  ,KC_NO  ,KC_NO  ,KC_NO    ,KC_NO
 
    ,TG(SYSCTL)  ,KC_NO
    ,AP_SLCK
@@ -110,11 +110,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                                                                              ,KC_TRNS
                                                          ,KC_TRNS  ,KC_TRNS  ,KC_TRNS
 
-                ,KC_6       ,KC_7  ,KC_8   ,KC_9     ,KC_0     ,KC_MINS    ,KC_EQL
-                ,KC_RBRC    ,KC_Y  ,KC_U   ,KC_I     ,KC_O     ,KC_P       ,KC_BSLS
-                            ,KC_H  ,KC_J   ,KC_K     ,KC_L     ,KC_SCLN    ,KC_ENT
-                ,KC_RPRN    ,KC_N  ,KC_M   ,KC_COMM  ,KC_DOT   ,KC_SLSH    ,KC_RSFT
-                                   ,KC_UP  ,KC_DOWN  ,KC_TRNS  ,KC_QUOT    ,KC_TRNS
+                ,KC_6       ,KC_7  ,KC_8     ,KC_9     ,KC_0     ,KC_MINS    ,KC_EQL
+                ,KC_RBRC    ,KC_Y  ,KC_U     ,KC_I     ,KC_O     ,KC_P       ,KC_BSLS
+                            ,KC_H  ,KC_J     ,KC_K     ,KC_L     ,KC_SCLN    ,KC_ENT
+                ,KC_RPRN    ,KC_N  ,KC_M     ,KC_COMM  ,KC_DOT   ,KC_SLSH    ,KC_RSFT
+                                   ,KC_TRNS  ,KC_DOWN  ,KC_TRNS  ,KC_QUOT    ,KC_TRNS
 
       ,KC_TRNS  ,KC_TRNS
       ,KC_TRNS
@@ -246,7 +246,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  /* /// ,KC_PTRN*/,KC_NO    ,KC_MUTE  ,KC_HOME  ,KC_UP    ,KC_END   ,KC_NO    ,KC_NO
                             ,KC_VOLU  ,KC_LEFT  ,KC_DOWN  ,KC_RGHT  ,KC_NO    ,LCTL(LSFT(KC_PWR))
                   ,KC_NO    ,KC_VOLD  ,KC_MPRV  ,KC_MPLY  ,KC_MNXT  ,KC_NO    ,KC_SLEP
-                                      ,KC_NO    ,KC_NO    ,KC_NO    ,KC_NO    ,KC_PWR
+                                      ,KC_TRNS  ,KC_NO    ,KC_NO    ,KC_NO    ,KC_PWR
 
           ,KC_NO  ,KC_NO
           ,KC_NO

keyboards/ergodox/readme.md

@@ -1,5 +1,7 @@
 # The Easy Way
 
+If you have an ErgoDox EZ, the absolute easiest way for you to customize your firmware is using the [graphical configurator](http://configure.ergodox-ez.com), which uses QMK under the hood. 
+
 If you can find firmware someone else has made that does what you want, that
 is the easiest way to customize your ErgoDox.  It requires no programming
 experience or the setup of a build environment.
@@ -63,7 +65,7 @@ files.  Check them out with:
 
 # Flashing Firmware
 
-## ErgoDox Ez
+## ErgoDox EZ
 
 The Ez uses the [Teensy Loader](https://www.pjrc.com/teensy/loader.html).
 
@@ -153,13 +155,10 @@ If you want to send a plain vanilla key, you can look up its code under `doc/key
 There are external tools for customizing the layout, but those do not use
 the featurs of this qmk firmware.  These sites include:
 
-  - [Massdrop configurator](https://keyboard-configurator.massdrop.com/ext/ergodox) for Ez
+  - The official [ErgoDox EZ configurator](http://configure.ergodox-ez.com)
+  - [Massdrop configurator](https://keyboard-configurator.massdrop.com/ext/ergodox) for EZ, works but not officially supported
   - [Input Club configurator](https://input.club/configurator-ergodox) for Infinity, provides left and right files
 
 You can also find an existing firmware that you like, for example from:
 
   - [Dozens of community-contributed keymaps](http://qmk.fm/keyboards/ergodox/)
-
-This qmk firmware also provides the ability to customize keymaps, but requires
-a toolchain to build the firmware.  See below for instructions on building
-firmware and customizing keymaps.

keyboards/planck/config.h

@@ -36,6 +36,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 }
 #define UNUSED_PINS
 
+#define AUDIO_VOICES
+
 #define BACKLIGHT_PIN B7
 
 /* COL2ROW or ROW2COL */

keyboards/planck/keymaps/default/Makefile

@@ -1,25 +1,3 @@
-
-
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = no        # Commands for debug and configuration
-NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
-MIDI_ENABLE = yes            # MIDI controls
-AUDIO_ENABLE = yes           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
-
 ifndef QUANTUM_DIR
 	include ../../../../Makefile
 endif

keyboards/planck/keymaps/jeremy-dev/keymap.c

@@ -0,0 +1,180 @@
+// This is the personal keymap of Jeremy Cowgar (@jcowgar). It is written for the programmer.
+
+// Configuration options
+#define PREVENT_STUCK_MODIFIERS
+
+#include "planck.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+enum my_layers {
+  ALPH = 0,
+  NUMS,
+  CURS,
+  SYMB,
+  FKEY
+};
+
+// Each macro gets a name for readability.
+enum my_keycodes {
+  MY_ABVE = SAFE_RANGE,
+  MY_BELW,
+  MY_TERM,
+  MY_DEQL, // /=
+  MY_MEQL, // *=
+  MY_SEQL, // -=
+  MY_PEQL, // +=
+  MY_NEQL, // !=
+  MY_LTGT, // <>
+  MY_DPIP, // ||
+  MY_DAMP, // &&
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [ALPH] = {
+    {KC_Q,          KC_W,      KC_E,      KC_R,      KC_T,    KC_LBRC,        KC_RBRC,        KC_Y,    KC_U,      KC_I,      KC_O,      KC_P},
+    {KC_A,          KC_S,      KC_D,      KC_F,      KC_G,    KC_LPRN,        KC_RPRN,        KC_H,    KC_J,      KC_K,      KC_L,      KC_SCLN},
+    {SFT_T(KC_Z),   KC_X,      KC_C,      KC_V,      KC_B,    KC_LCBR,        KC_RCBR,        KC_N,    KC_M,      KC_COMM,   KC_DOT,    SFT_T(KC_SLSH)},
+    {CTL_T(KC_TAB), OSL(FKEY), OSL(NUMS), OSL(SYMB), KC_SPC,  ALT_T(KC_BSPC), GUI_T(KC_DELT), KC_ENT,  OSL(SYMB), OSL(CURS), TG(CURS),  CTL_T(KC_ESC)}
+  },
+  [NUMS] = {
+    {KC_NO,         KC_NO,     KC_NO,     KC_NO,     KC_NO,   KC_TRNS,        KC_TRNS,        KC_COMM, KC_7,      KC_8,      KC_9,      KC_SLSH},
+    {KC_LSFT,       KC_LGUI,   KC_LALT,   KC_LCTL,   KC_NO,   KC_TRNS,        KC_TRNS,        KC_LPRN, KC_4,      KC_5,      KC_6,      KC_ASTR},
+    {KC_NO,         KC_NO,     KC_NO,     KC_NO,     KC_NO,   KC_TRNS,        KC_TRNS,        KC_RPRN, KC_1,      KC_2,      KC_3,      KC_MINS},
+    {KC_NO,         KC_NO,     KC_TRNS,   TG(NUMS),  KC_TRNS, KC_TRNS,        KC_TRNS,        KC_TRNS, KC_0,      KC_DOT,    KC_EQL,    KC_PLUS}
+  },
+  [CURS] = {
+    {KC_MPLY,       KC_BSPC,   KC_UP,     KC_DELT,   KC_PGUP, KC_TRNS,        KC_TRNS,        KC_NO,   KC_NO,     KC_NO,     KC_NO,     KC_NO},
+    {KC_VOLU,       KC_LEFT,   KC_DOWN,   KC_RGHT,   KC_PGDN, KC_TRNS,        KC_TRNS,        KC_NO,   KC_LCTL,   KC_LALT,   KC_LGUI,   KC_LSFT},
+    {KC_VOLD,       KC_NO,     MY_ABVE,   MY_TERM,   KC_NO,   KC_TRNS,        KC_TRNS,        KC_NO,   KC_NO,     KC_NO,     KC_NO,     KC_LSFT},
+    {KC_MUTE,       KC_NO,     MY_BELW,   KC_NO,     KC_TRNS, KC_TRNS,        KC_TRNS,        KC_TRNS, KC_NO,     KC_TRNS,   KC_TRNS,   KC_NO}
+  },
+  [SYMB] = {
+    {MY_DEQL,       MY_MEQL,   MY_SEQL,   MY_PEQL,   MY_NEQL, KC_NO,          KC_NO,          MY_LTGT, KC_LABK,   KC_RABK,   KC_COLN,   KC_DLR},
+    {KC_SLSH,       KC_ASTR,   KC_MINS,   KC_PLUS,   KC_EQL,  KC_NO,          KC_PIPE,        MY_DPIP, KC_GRV,    KC_QUOT,   KC_DQUO,   KC_HASH},
+    {KC_BSLS,       KC_CIRC,   KC_PERC,   KC_UNDS,   KC_NO,   KC_NO,          KC_AMPR,        MY_DAMP, KC_TILD,   KC_AT,     KC_EXLM,   KC_QUES},
+    {KC_NO,         KC_NO,     KC_NO,     KC_TRNS,   KC_NO,   KC_TRNS,        KC_TRNS,        KC_TRNS, KC_TRNS,   KC_NO,     KC_NO,     KC_NO}
+  },
+  [FKEY] = {
+    {KC_NO,         KC_NO,     KC_NO,     KC_NO,     KC_NO,   KC_NO,          KC_NO,          KC_NO,   KC_F9,     KC_F10,    KC_F11,    KC_F12},
+    {KC_LSFT,       KC_LGUI,   KC_LALT,   KC_LCTL,   KC_NO,   KC_NO,          KC_NO,          KC_NO,   KC_F5,     KC_F6,     KC_F7,     KC_F8},
+    {KC_NO,         KC_NO,     KC_NO,     KC_NO,     KC_NO,   KC_NO,          KC_NO,          KC_NO,   KC_F1,     KC_F2,     KC_F3,     KC_F4},
+    {KC_NO,         KC_TRNS,   KC_NO,     KC_NO,     KC_NO,   KC_NO,          KC_NO,          KC_NO,   KC_NO,     KC_NO,     KC_NO,     KC_NO}
+  }
+};
+
+void press_key(uint16_t key) {
+  register_code(key);
+  unregister_code(key);
+}
+
+void press_two_keys(uint16_t key1, uint16_t key2) {
+  register_code(key1);
+  register_code(key2);
+  unregister_code(key2);
+  unregister_code(key1);
+}
+
+void press_three_keys(uint16_t key1, uint16_t key2, uint16_t key3) {
+  register_code(key1);
+  register_code(key2);
+  register_code(key3);
+  unregister_code(key3);
+  unregister_code(key2);
+  unregister_code(key1);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case MY_BELW:
+      if (record->event.pressed) {
+        press_two_keys(KC_LGUI, KC_RGHT);
+        press_key(KC_ENT);
+      }
+
+      return false;
+
+    case MY_ABVE:
+      if (record->event.pressed) {
+        press_two_keys(KC_LGUI, KC_LEFT);
+        press_key(KC_ENT);
+        press_key(KC_UP);
+      }
+
+      return false;
+
+    case MY_TERM:
+      if (record->event.pressed) {
+        press_three_keys(KC_LGUI, KC_LSFT, KC_ENT);
+      }
+
+      return false;
+
+    case MY_DEQL: // /=
+      if (record->event.pressed) {
+        press_key(KC_SLSH);
+        press_key(KC_EQL);
+      }
+
+      return false;
+
+    case MY_MEQL: // *=
+      if (record->event.pressed) {
+        press_two_keys(KC_LSFT, KC_ASTR);
+        press_key(KC_EQL);
+      }
+
+      return false;
+
+    case MY_SEQL: // -=
+      if (record->event.pressed) {
+        press_key(KC_MINS);
+        press_key(KC_EQL);
+      }
+
+      return false;
+
+    case MY_PEQL: // +=
+      if (record->event.pressed) {
+        press_two_keys(KC_LSFT, KC_PLUS);
+        press_key(KC_EQL);
+      }
+
+      return false;
+
+    case MY_NEQL: // !=
+      if (record->event.pressed) {
+        press_two_keys(KC_LSFT, KC_EXLM);
+        press_key(KC_EQL);
+      }
+
+      return false;
+
+    case MY_LTGT: // <>
+      if (record->event.pressed) {
+        press_two_keys(KC_LSFT, KC_LABK);
+        press_two_keys(KC_LSFT, KC_RABK);
+      }
+
+      return false;
+
+    case MY_DPIP: // ||
+      if (record->event.pressed) {
+        press_two_keys(KC_LSFT, KC_PIPE);
+        press_two_keys(KC_LSFT, KC_PIPE);
+      }
+
+      return false;
+
+    case MY_DAMP: // &&
+      if (record->event.pressed) {
+        press_two_keys(KC_LSFT, KC_AMPR);
+        press_two_keys(KC_LSFT, KC_AMPR);
+      }
+
+      return false;
+  }
+
+  return true;
+}

keyboards/planck/keymaps/jeremy-dev/readme.md

@@ -0,0 +1,85 @@
+Jeremy Cowgar's Planck Keymap
+=============================
+
+I am a programmer by trade and suffer from the beginning stages of RSI. As a programmer, I use letters, symbols and cursor navigation most often. To prevent strange finger gymnastics, I wrote a script to rank which non-letter characters occurred in my primary source projects most often and then placed these characters in the easiest to reach locations, within reason and for me. I made heavy use of momentary layer toggling.
+
+Layers
+------
+
+The key mapping is made up of 5 layers: Letters, Symbols, Navigation, Numbers, and Function Keys.
+
+The layout can be viewed visually at:
+
+http://www.keyboard-layout-editor.com/#/gists/319474e5e2d199e583371ed1d2aec316
+
+* Purple buttons are dual function keys.
+* Green buttons are layer momentary toggle keys.
+* Red buttons are layer persistent toggle keys.
+
+The keys have multiple symbols:
+
+* Upper left: standard layer, the letter layer
+* Upper right: function layer
+* Lower left: navigation layer
+* Lower right: symbol layer
+
+The symbols in the layout editor are not entirely clear.
+
+The Z and ? keys double as shift keys. Hold for a shift, tap for a Z or ?
+
+The bottom row from left to right:
+
+* Tab when pressed, Control when held. It also is the volume mute key when in the "Navigation" layer
+* Function layer momentary toggle
+* Number layer momentary toggle
+* Symbol layer momentary toggle. When in the "Number" layer, this key also makes the "Number" layer sticky for using the 10 key for quite a bit of entry
+* Space
+* Backspace when tapped, Option when held
+* Delete when tapped, Command when held
+* Return
+* Symbol layer momentary toggle. When in the "Number" layer, key also is the zero key.
+* Navigation layer momentary toggle
+* Navigation layer toggle. This was included for when you are browsing a website, document or otherwise wish to stay in navigation mode. When in the "Number" layer, the key is the = symbol
+* Escape when pressed, Control when held. When in the "Number" layer, the key is the + symbol
+
+General Notes
+-------------
+
+The letter layer is separated by 2 center rows of keys. This spreads the hands out a little further which helps not twist the wrists as much. The 2 center rows are [], (), [], and Ctrl and Alt keys.
+
+The symbol layer keys are accessed by the thumbs. They are the closest to the thumbs, instead of the number toggle, because in my code I found I used symbols much more often than numbers. There are two symbol layer keys because the symbols spread across the right and left half of the keyboard. Thus, some symbols are easier hit with the left hand modifier or right hand modifier.
+
+The number layer key is only accessible by the left thumb because all of the number keys are on the right side of the keyboard. When in the number layer, you can press the key to the right to make that layer sticky when you are going to do a lot of number entry.
+
+The function layer key is only accessible by the left thumb because all of the function keys are on the right side of the keyboard.
+
+The navigation layer key is only accessible by the right thumb because all of the navigation keys are on the left side of the keyboard. You can press the key to the right of the navigation layer to make the navigation layer sticky when you are doing a lot of navigation, reading a web page for example.
+
+When using the number or navigation layers, the same hand that accesses the momentary layer toggle key also has the 4 primary modifiers under their home row.
+
+* Pointer finger is control
+* Middle finger is option
+* Ring finger is command
+* Pinky finger is shift
+
+This is so you can easily press Cmd+Shift+F4 or when navigating, select text or words of text by pressing Shift+Control, for example.
+
+Some keys are duplicated. For example, () are available in easy to reach locations while in the Number layer because they are often used in math.
+
+The symbol layer has additional helpers for programming including a single keys that enter /=, \*=, -=, +=, !=, <>, ||, and &&. It also includes three special Return keys on the left:
+
+* Up CR which moves the cursor up, to the end of the line and then presses CR
+* Down CR which moves the cursor to the end of the line and then presses CR
+* Right ; which moves the cursor to the end of the line and presses ; for C styled languages, such as JavaScript which is a primary language I use
+
+Word of Warning
+---------------
+
+I have been using the keymap for some time now and believe it to be a good keymap. There are a few things through the week that I wonder if it would have been better if this key were moved to that location.
+
+This keymap may change for further optimization.
+
+Please Give Feedback!
+---------------------
+
+I am very interested in your feedback. Send me a message here on GitHub, r/jcowgar or @jcowgar.

keyboards/planck/out.txt

@@ -1,66 +0,0 @@
--------- begin --------
-avr-gcc.exe (AVR_8_bit_GNU_Toolchain_3.5.0_1662) 4.9.2
-Copyright (C) 2014 Free Software Foundation, Inc.
-This is free software; see the source for copying conditions.  There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-Compiling: ../../keyboards/planck/planck.c                            [OK]
-Compiling: ../../keyboards/planck/keymaps/experimental/keymap.c       [WARNINGS]
- | 
- | ../../keyboards/planck/keymaps/experimental/keymap.c: In function 'action_get_macro':
- | ../../keyboards/planck/keymaps/experimental/keymap.c:227:17: warning: implicit declaration of function 'breathing_speed_set' [-Wimplicit-function-declaration]
- |                  breathing_speed_set(2);
- |                  ^
- | ../../keyboards/planck/keymaps/experimental/keymap.c:228:17: warning: implicit declaration of function 'breathing_pulse' [-Wimplicit-function-declaration]
- |                  breathing_pulse();
- |                  ^
- | 
-Compiling: ../../quantum/quantum.c                                    [OK]
-Compiling: ../../quantum/keymap.c                                     [OK]
-Compiling: ../../quantum/keycode_config.c                             [OK]
-Compiling: ../../quantum/matrix.c                                     [OK]
-Compiling: ../../quantum/audio/audio.c                                [OK]
-Compiling: ../../quantum/audio/voices.c                               [OK]
-Compiling: ../../quantum/audio/luts.c                                 [OK]
-Compiling: ../../tmk_core/protocol/lufa/lufa.c                        [OK]
-Compiling: ../../tmk_core/protocol/lufa/descriptor.c                  [OK]
-Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Common/HIDParser.c [OK]
-Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.c [OK]
-Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.c [OK]
-Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.c [OK]
-Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.c [OK]
-Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/PipeStream_AVR8.c [OK]
-Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.c [OK]
-Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.c [OK]
-Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.c [OK]
-Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/ConfigDescriptors.c [OK]
-Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/DeviceStandardReq.c [OK]
-Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/Events.c [OK]
-Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/HostStandardReq.c [OK]
-Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/USBTask.c [OK]
-Compiling: ../../tmk_core/common/host.c                               [OK]
-Compiling: ../../tmk_core/common/keyboard.c                           [OK]
-Compiling: ../../tmk_core/common/action.c                             [OK]
-Compiling: ../../tmk_core/common/action_tapping.c                     [OK]
-Compiling: ../../tmk_core/common/action_macro.c                       [OK]
-Compiling: ../../tmk_core/common/action_layer.c                       [OK]
-Compiling: ../../tmk_core/common/action_util.c                        [OK]
-Compiling: ../../tmk_core/common/print.c                              [OK]
-Compiling: ../../tmk_core/common/debug.c                              [OK]
-Compiling: ../../tmk_core/common/util.c                               [OK]
-Compiling: ../../tmk_core/common/avr/suspend.c                        [OK]
-Assembling: ../../tmk_core/common/avr/xprintf.S                       [OK]
-Compiling: ../../tmk_core/common/avr/timer.c                          [OK]
-Compiling: ../../tmk_core/common/avr/bootloader.c                     [OK]
-Compiling: ../../tmk_core/common/magic.c                              [OK]
-Compiling: ../../tmk_core/common/avr/eeconfig.c                       [OK]
-Compiling: ../../tmk_core/common/mousekey.c                           [OK]
-Compiling: ../../tmk_core/common/command.c                            [OK]
-Compiling: ../../tmk_core/common/backlight.c                          [OK]
-Linking: .build/planck_experimental.elf                               [ERRORS]
- | 
- | .build/obj_planck_experimental/keyboards/planck/keymaps/experimental/keymap.o: In function `action_get_macro':
- | C:\Users\Fred Wales\Documents\Programming\qmk_firmware\keyboards\planck/../../keyboards/planck/keymaps/experimental/keymap.c:240: undefined reference to `breathing_speed_set'
- | C:\Users\Fred Wales\Documents\Programming\qmk_firmware\keyboards\planck/../../keyboards/planck/keymaps/experimental/keymap.c:241: undefined reference to `breathing_pulse'
- | collect2.exe: error: ld returned 1 exit status
- | 

keyboards/planck/rules.mk

@@ -51,17 +51,17 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 #   the appropriate keymap folder that will get included automatically
 #
 BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+MOUSEKEY_ENABLE ?= no       # Mouse keys(+4700)
 EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
 CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+COMMAND_ENABLE ?= no        # Commands for debug and configuration
 NKRO_ENABLE ?= no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-AUDIO_ENABLE ?= no           # Audio output on port C6
+BACKLIGHT_ENABLE ?= no      # Enable keyboard backlight functionality
+MIDI_ENABLE ?= yes            # MIDI controls
+AUDIO_ENABLE ?= yes           # Audio output on port C6
 UNICODE_ENABLE ?= no         # Unicode
 BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.
 API_SYSEX_ENABLE = yes
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE

keyboards/preonic/config.h

@@ -37,6 +37,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 }
 #define UNUSED_PINS
 
+#define AUDIO_VOICES
+
 #define BACKLIGHT_PIN B7
 
 /* COL2ROW or ROW2COL */

keyboards/preonic/rules.mk

@@ -58,12 +58,12 @@ EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
 CONSOLE_ENABLE ?= no         # Console for debug(+400)
 COMMAND_ENABLE ?= no        # Commands for debug and configuration
 NKRO_ENABLE ?= no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality
+BACKLIGHT_ENABLE ?= no      # Enable keyboard backlight functionality
 MIDI_ENABLE ?= yes            # MIDI controls
 AUDIO_ENABLE ?= yes           # Audio output on port C6
 UNICODE_ENABLE ?= no         # Unicode
 BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.
 API_SYSEX_ENABLE ?= yes
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE

keyboards/subatomic/keymaps/default/keymap.c

@@ -0,0 +1,280 @@
+#include "subatomic.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+#ifdef AUDIO_ENABLE
+  #include "audio.h"
+#endif
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _LOWER 3
+#define _RAISE 4
+#define _ADJUST 16
+
+enum subatomic_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  LOWER,
+  RAISE,
+  BACKLIT
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-------------------------------------------------------------------------------------------------.
+ * |  Ins |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp | Del  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |   -  | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  |   [  |   ]  |
+ * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+ * |   =  | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |   "  |Enter |
+ * |------+------+------+------+------+------+------|------+------+------+------+------+------+------|
+ * | Pg Up| Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  | Home | End  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Pg Dn| Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  | Right|   \  |
+ * `-------------------------------------------------------------------------------------------------'
+ */
+[_QWERTY] = {
+  {KC_TRNS, KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, KC_TRNS},
+  {KC_TRNS, KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_DEL,  KC_TRNS},
+  {KC_TRNS, KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_TRNS},
+  {KC_TRNS, KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,  KC_TRNS},
+  {KC_TRNS, BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_TRNS}
+},
+
+/* Colemak
+ * ,-------------------------------------------------------------------------------------------------.
+ * |  Ins |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp | Del  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |   -  | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  |   [  |   ]  |
+ * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+ * |   =  | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |   "  |Enter |
+ * |------+------+------+------+------+------+------|------+------+------+------+------+------+------|
+ * | Pg Up| Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  | Home | End  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Pg Dn| Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  | Right|   \  |
+ * `-------------------------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = {
+  {KC_TRNS, KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, KC_TRNS},
+  {KC_TRNS, KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_DEL,  KC_TRNS},
+  {KC_TRNS, KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT, KC_TRNS},
+  {KC_TRNS, KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,  KC_TRNS},
+  {KC_TRNS, BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_TRNS}
+},
+
+/* Dvorak
+ * ,-------------------------------------------------------------------------------------------------.
+ * |  Ins |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp | Del  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |   [  | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  |   /  |   =  |
+ * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+ * |   ]  | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |   -  |Enter |
+ * |------+------+------+------+------+------+------|------+------+------+------+------+------+------|
+ * | Pg Up| Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  | Home | End  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Pg Dn| Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  | Right|   \  |
+ * `-------------------------------------------------------------------------------------------------'
+ */
+[_DVORAK] = {
+  {KC_TRNS, KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, KC_TRNS},
+  {KC_TRNS, KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_DEL,  KC_TRNS},
+  {KC_TRNS, KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH, KC_TRNS},
+  {KC_TRNS, KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT,  KC_TRNS},
+  {KC_TRNS, BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_TRNS}
+},
+
+/* Lower
+ * ,-------------------------------------------------------------------------------------------------.
+ * |      |   ~  |  F1  |  F3  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  | F10  | F11  | F12  |
+ * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+ * |   _  | Tab  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  |   {  |   }  |
+ * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+ * |   +  | Esc  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |      |      |
+ * |------+------+------+------+------+------+------|------+------+------+------+------+------+------|
+ * |      | Shift|  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |      |
+ * `-------------------------------------------------------------------------------------------------'
+ */
+[_LOWER] = {
+  {KC_TRNS, KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, KC_TRNS},
+  {KC_TRNS, KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,  KC_TRNS},
+  {KC_TRNS, KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, KC_TRNS},
+  {KC_TRNS, _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______,KC_TRNS},
+  {KC_TRNS, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, KC_TRNS}
+},
+
+/* Raise
+ * ,-------------------------------------------------------------------------------------------------.
+ * |      |   ~  |  F1  |  F3  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  | F10  | F11  | F12  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |   _  | Tab  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |   {  |   }  |
+ * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+ * |   +  | Esc  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |      |      |
+ * |------+------+------+------+------+------+------|------+------+------+------+------+------+------|
+ * |      | Shift|  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |             |      | Next | Vol- | Vol+ |      | Play |
+ * `-------------------------------------------------------------------------------------------------'
+ */
+[_RAISE] = {
+  {KC_TRNS, KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, KC_TRNS},
+  {KC_TRNS, KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,  KC_TRNS},
+  {KC_TRNS, KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, KC_TRNS},
+  {KC_TRNS, _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______, KC_TRNS},
+  {KC_TRNS, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, KC_TRNS}
+},
+
+/* Adjust (Lower + Raise)
+ * ,-------------------------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |             |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      | Reset|      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+ * |      |      |      |      |Aud on|AudOff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|      |      |      |
+ * |------+------+------+------+------+------+------|------+------+------+------+------+------+------|
+ * |      |      |Voice-|Voice+|Mus on|MusOff|MidiOn|MidOff|      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |             |      |      |      |      |      |      |
+ * `-------------------------------------------------------------------------------------------------'
+ */
+[_ADJUST] = {
+  {KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS},
+  {KC_TRNS, _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL,  KC_TRNS},
+  {KC_TRNS, _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  _______, _______, KC_TRNS},
+  {KC_TRNS, _______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  _______, _______, _______, _______, _______, KC_TRNS},
+  {KC_TRNS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_TRNS}
+}
+
+
+};
+
+#ifdef AUDIO_ENABLE
+float tone_startup[][2] = {
+  {NOTE_B5, 20},
+  {NOTE_B6, 8},
+  {NOTE_DS6, 20},
+  {NOTE_B6, 8}
+};
+
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
+float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
+
+float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
+
+float music_scale[][2]     = SONG(MUSIC_SCALE_SOUND);
+#endif
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+        case QWERTY:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+            #endif
+            persistant_default_layer_set(1UL<<_QWERTY);
+          }
+          return false;
+          break;
+        case COLEMAK:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              PLAY_NOTE_ARRAY(tone_colemak, false, 0);
+            #endif
+            persistant_default_layer_set(1UL<<_COLEMAK);
+          }
+          return false;
+          break;
+        case DVORAK:
+          if (record->event.pressed) {
+            #ifdef AUDIO_ENABLE
+              PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
+            #endif
+            persistant_default_layer_set(1UL<<_DVORAK);
+          }
+          return false;
+          break;
+        case LOWER:
+          if (record->event.pressed) {
+            layer_on(_LOWER);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          } else {
+            layer_off(_LOWER);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          }
+          return false;
+          break;
+        case RAISE:
+          if (record->event.pressed) {
+            layer_on(_RAISE);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          } else {
+            layer_off(_RAISE);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          }
+          return false;
+          break;
+        case BACKLIT:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+            #ifdef BACKLIGHT_ENABLE
+              backlight_step();
+            #endif
+          } else {
+            unregister_code(KC_RSFT);
+          }
+          return false;
+          break;
+      }
+    return true;
+};
+
+void matrix_init_user(void) {
+    #ifdef AUDIO_ENABLE
+        startup_user();
+    #endif
+}
+
+#ifdef AUDIO_ENABLE
+
+void startup_user()
+{
+    _delay_ms(20); // gets rid of tick
+    PLAY_NOTE_ARRAY(tone_startup, false, 0);
+}
+
+void shutdown_user()
+{
+    PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+    _delay_ms(150);
+    stop_all_notes();
+}
+
+void music_on_user(void)
+{
+    music_scale_user();
+}
+
+void music_scale_user(void)
+{
+    PLAY_NOTE_ARRAY(music_scale, false, 0);
+}
+
+#endif

keyboards/xd60/Makefile

@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif

keyboards/xd60/config.h

@@ -0,0 +1,68 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    XIUDI
+#define PRODUCT         XD60
+#define DESCRIPTION     XD60 Keyboard by XIUDI
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+  keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#endif

keyboards/xd60/keymaps/default/keymap.c

@@ -0,0 +1,64 @@
+#include "xd60.h"
+#include "action_layer.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  // 0: Base Layer
+  KEYMAP(
+      KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_BSLS,  KC_GRV,    \
+      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC,  KC_RBRC,           KC_BSPC,   \
+      KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT,  KC_NO,             KC_ENT,    \
+      KC_LSFT, KC_NO,   KC_Z,    KC_X,    KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH,  KC_RSFT, KC_UP,    KC_DEL,      \
+      KC_LCTL, KC_LGUI, KC_LALT,                          KC_SPC,                          KC_RGUI, KC_RALT,  KC_LEFT, KC_DOWN,  KC_RIGHT),
+
+  // 1: Function Layer
+  KEYMAP(
+      RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,   KC_F10,  KC_F11,   KC_F12,  KC_F13,   KC_F14,    \
+      KC_NO,   KC_WH_U, KC_UP,   KC_WH_D, KC_BSPC,KC_HOME,KC_CALC,KC_NO,  KC_INS, KC_NO,   KC_PSCR, KC_SLCK,  KC_PAUS,           KC_DEL,    \
+      KC_NO,   KC_LEFT, KC_DOWN, KC_RIGHT,KC_DEL, KC_END, KC_PGDN,KC_NO,  KC_NO,  KC_NO,   KC_HOME, KC_PGUP,  KC_NO,             KC_ENT,    \
+      KC_LSFT, KC_NO,   KC_NO,   KC_APP,  BL_TOGG,BL_DEC, BL_INC, KC_VOLD,KC_VOLU,KC_MUTE, KC_END,  KC_PGDN,  KC_RSFT, KC_PGUP,  KC_NO,      \
+      KC_LCTL, KC_LGUI, KC_LALT,                          KC_SPC,                          KC_RALT, F(0),     KC_HOME, KC_PGDOWN,KC_END),
+
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_LAYER_MOMENTARY(1),  // to Fn overlay
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  // MACRODOWN only works in this function
+
+  switch(id) {
+    case 0:
+      if (record->event.pressed) {
+        register_code(KC_RSFT);
+      } else {
+        unregister_code(KC_RSFT);
+      }
+    break;
+  }
+
+  return MACRO_NONE;
+};
+
+void matrix_scan_user(void) {
+
+  // Layer LED indicators
+  uint32_t layer = layer_state;
+
+  if (layer & (1<<1)) {
+    xd60_esc_led_on();
+  } else {
+    xd60_esc_led_off();
+  }
+
+  /*
+  if (layer & (1<<2)) {
+    xd60_poker_leds_on();
+    xd60_esc_led_on();
+  } else {
+    xd60_poker_leds_off();
+    xd60_esc_led_off();
+  }
+  */
+};

keyboards/xd60/keymaps/default/readme.md

@@ -0,0 +1,9 @@
+# Default Keymap for XIUDI's 60% XD60 PCB
+
+![Default Keymap for XD60](https://img.alicdn.com/imgextra/i1/1713761720/TB2K0gTalPxQeBjy1XcXXXHzVXa_!!1713761720.png)
+
+## Additional Notes
+Default Keymap for XD60 as indicated on the original sale page.
+
+## Build
+To build the default keymap, simply run `make xd60-default`.

keyboards/xd60/keymaps/stanleylai/keymap.c

@@ -0,0 +1,60 @@
+#include "xd60.h"
+#include "action_layer.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  // 0: Base Layer
+  KEYMAP(
+      KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_BSLS,  KC_GRV,    \
+      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC,  KC_RBRC,           KC_BSPC,   \
+      F(0),    KC_A,    KC_S,    KC_D,    KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT,  KC_NO,             KC_ENT,    \
+      KC_LSFT, KC_NO,   KC_Z,    KC_X,    KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH,  KC_RSFT, KC_UP,    KC_DEL,    \
+      KC_LCTL, KC_LALT, KC_LGUI,                          KC_SPC,                          KC_RGUI, KC_RALT,  KC_LEFT, KC_DOWN,  KC_RIGHT),
+
+  // 1: Function Layer
+  KEYMAP(
+      RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,   KC_F10,  KC_F11,   KC_F12,  KC_F13,   KC_F14,    \
+      KC_CAPS, KC_MPRV, KC_UP,   KC_MNXT, KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,   KC_NO,   BL_STEP,  BL_TOGG,           KC_DEL,    \
+      F(0),    KC_LEFT, KC_DOWN, KC_RIGHT,KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,   KC_NO,   KC_NO,    KC_NO,             KC_ENT,    \
+      KC_LSFT, KC_NO,   KC_VOLD, KC_MUTE, KC_VOLU,KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,   KC_NO,   KC_NO,    KC_RSFT, KC_PGUP,  KC_INS,    \
+      KC_LCTL, KC_LALT, KC_LGUI,                          KC_MPLY,                         KC_RGUI, KC_RALT,  KC_HOME, KC_PGDOWN,KC_END),
+
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_LAYER_MOMENTARY(1),  // to Fn overlay
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  // MACRODOWN only works in this function
+
+  switch(id) {
+    case 0:
+      if (record->event.pressed) {
+        register_code(KC_RSFT);
+      } else {
+        unregister_code(KC_RSFT);
+      }
+    break;
+  }
+
+  return MACRO_NONE;
+};
+
+void matrix_scan_user(void) {
+
+  // Layer LED indicators
+  uint32_t layer = layer_state;
+
+  if (layer & (1<<1)) {
+    xd60_wasd_leds_on();
+    xd60_fn_led_on();
+    xd60_esc_led_on();
+    xd60_poker_leds_on();
+  } else {
+    xd60_wasd_leds_off();
+    xd60_fn_led_off();
+    xd60_esc_led_off();
+    xd60_poker_leds_off();
+  }
+};

keyboards/xd60/readme.md

@@ -0,0 +1,13 @@
+# QMK Firmware for XIUDI's 60% XD60 PCB
+
+![Top View of XD60 Keyboard, with DSA Dolch keycaps](./top-view.JPG)
+![Angled View of XD60 Keyboard Arrow Cluster, with DSA Dolch keycaps](./arrow-cluster.JPG)
+
+## Quantum MK Firmware
+For the full Quantum feature list, see [the parent readme.md](/readme.md).
+
+## Additional Notes
+The XD60 is essentially a GH60 rev. C, with support for a right-hand arrow cluster. Includes full compatibility with GH60 expansion boards. Board also supports in-switch LEDs (two-pin, single colour), as well as WS2182 LED strips for underglow lighting. Default keymap included, matching configuration on sale page.
+
+## Build
+To build the default keymap, simply run `make xd60-default`.

keyboards/xd60/rules.mk

@@ -0,0 +1,65 @@
+# MCU name
+# MCU = at90usb1287
+MCU = atmega32u4
+
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+# LUFA specific
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend

keyboards/xd60/xd60.c

@@ -0,0 +1,25 @@
+#include "xd60.h"
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+  if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+		xd60_caps_led_on();
+	} else {
+		xd60_caps_led_off();
+  }
+
+  // if (usb_led & (1<<USB_LED_NUM_LOCK)) {
+	// xd60_esc_led_on();
+	// } else {
+	// xd60_esc_led_off();
+  // }
+
+  // if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
+	// xd60_fn_led_on();
+	// } else {
+	// xd60_fn_led_off();
+  // }
+
+	led_set_user(usb_led);
+}

keyboards/xd60/xd60.h

@@ -0,0 +1,43 @@
+#ifndef XD60_H
+#define XD60_H
+
+#include "quantum.h"
+#include "led.h"
+
+/* XD60 LEDs
+ *   GPIO pads
+ *   0 F7 WASD LEDs
+ *   1 F6 ESC LED
+ *   2 F5 FN LED
+ *   3 F4 POKER Arrow LEDs
+ *   B2 Capslock LED
+ *   B0 not connected
+ */
+inline void xd60_caps_led_on(void)    { DDRB |=  (1<<2); PORTB &= ~(1<<2); }
+inline void xd60_poker_leds_on(void)  { DDRF |=  (1<<4); PORTF &= ~(1<<4); }
+inline void xd60_fn_led_on(void)    	{ DDRF |=  (1<<5); PORTF &= ~(1<<5); }
+inline void xd60_esc_led_on(void)    	{ DDRF |=  (1<<6); PORTF &= ~(1<<6); }
+inline void xd60_wasd_leds_on(void)   { DDRF |=  (1<<7); PORTF &= ~(1<<7); }
+
+inline void xd60_caps_led_off(void)   { DDRB &= ~(1<<2); PORTB &= ~(1<<2); }
+inline void xd60_poker_leds_off(void) { DDRF &= ~(1<<4); PORTF &= ~(1<<4); }
+inline void xd60_fn_led_off(void)   	{ DDRF &= ~(1<<5); PORTF &= ~(1<<5); }
+inline void xd60_esc_led_off(void)   	{ DDRF &= ~(1<<6); PORTF &= ~(1<<6); }
+inline void xd60_wasd_leds_off(void)  { DDRF &= ~(1<<7); PORTF &= ~(1<<7); }
+
+/* XD60 Keymap Definition Macro */
+#define KEYMAP( \
+      K00,  K01,  K02,  K03,  K04,  K05,  K06,  K07,  K08,  K09,  K0A,  K0B,  K0C,  K0D,  K49, \
+      K10,  K11,  K12,  K13,  K14,  K15,  K16,  K17,  K18,  K19,  K1A,  K1B,  K1C,  K1D,       \
+      K20,  K21,  K22,  K23,  K24,  K25,  K26,  K27,  K28,  K29,  K2A,  K2B,  K2C,  K2D,       \
+      K30,  K31,  K32,  K33,  K34,  K35,  K36,  K37,  K38,  K39,  K3A,  K3B,  K47,  K3D,  K3C, \
+      K40,  K41,  K42,              K45,                          K4A,  K4B,  K48,  K4C,  K4D  \
+) { \
+    { K00,  K01,  K02,  K03,  K04,  K05,  K06,  K07,  K08,  K09,  K0A,  K0B,  K0C,  K0D }, \
+    { K10,  K11,  K12,  K13,  K14,  K15,  K16,  K17,  K18,  K19,  K1A,  K1B,  K1C,  K1D }, \
+    { K20,  K21,  K22,  K23,  K24,  K25,  K26,  K27,  K28,  K29,  K2A,  K2B,  K2C,  K2D }, \
+    { K30,  K31,  K32,  K33,  K34,  K35,  K36,  K37,  K38,  K39,  K3A,  K3B,  K3C,  K3D }, \
+    { K40,  K41,  K42,  KC_NO,KC_NO,K45,  KC_NO,K47,  K48,  K49,  K4A,  K4B,  K4C,  K4D }  \
+}
+
+#endif

quantum/api.c

@@ -116,28 +116,29 @@ void process_api(uint16_t length, uint8_t * data) {
                     MT_GET_DATA_ACK(DT_KEYMAP_SIZE, keymap_size, 2);
                     break;
                 }
-                case DT_KEYMAP: {
-                    uint8_t keymap_data[MATRIX_ROWS * MATRIX_COLS * 4 + 3];
-                    keymap_data[0] = data[2];
-                    keymap_data[1] = MATRIX_ROWS;
-                    keymap_data[2] = MATRIX_COLS;
-                    for (int i = 0; i < MATRIX_ROWS; i++) {
-                        for (int j = 0; j < MATRIX_COLS; j++) {
-                            keymap_data[3 + (i*MATRIX_COLS*2) + (j*2)] = pgm_read_word(&keymaps[data[2]][i][j]) >> 8;
-                            keymap_data[3 + (i*MATRIX_COLS*2) + (j*2) + 1] = pgm_read_word(&keymaps[data[2]][i][j]) & 0xFF;
-                        }
-                    }
-                    MT_GET_DATA_ACK(DT_KEYMAP, keymap_data, MATRIX_ROWS * MATRIX_COLS * 4 + 3);
-                    // uint8_t keymap_data[5];
-                    // keymap_data[0] = data[2];
-                    // keymap_data[1] = data[3];
-                    // keymap_data[2] = data[4];
-                    // keymap_data[3] = pgm_read_word(&keymaps[data[2]][data[3]][data[4]]) >> 8;
-                    // keymap_data[4] = pgm_read_word(&keymaps[data[2]][data[3]][data[4]]) & 0xFF;
+                // This may be too much
+                // case DT_KEYMAP: {
+                //     uint8_t keymap_data[MATRIX_ROWS * MATRIX_COLS * 4 + 3];
+                //     keymap_data[0] = data[2];
+                //     keymap_data[1] = MATRIX_ROWS;
+                //     keymap_data[2] = MATRIX_COLS;
+                //     for (int i = 0; i < MATRIX_ROWS; i++) {
+                //         for (int j = 0; j < MATRIX_COLS; j++) {
+                //             keymap_data[3 + (i*MATRIX_COLS*2) + (j*2)] = pgm_read_word(&keymaps[data[2]][i][j]) >> 8;
+                //             keymap_data[3 + (i*MATRIX_COLS*2) + (j*2) + 1] = pgm_read_word(&keymaps[data[2]][i][j]) & 0xFF;
+                //         }
+                //     }
+                //     MT_GET_DATA_ACK(DT_KEYMAP, keymap_data, MATRIX_ROWS * MATRIX_COLS * 4 + 3);
+                //     // uint8_t keymap_data[5];
+                //     // keymap_data[0] = data[2];
+                //     // keymap_data[1] = data[3];
+                //     // keymap_data[2] = data[4];
+                //     // keymap_data[3] = pgm_read_word(&keymaps[data[2]][data[3]][data[4]]) >> 8;
+                //     // keymap_data[4] = pgm_read_word(&keymaps[data[2]][data[3]][data[4]]) & 0xFF;
 
-                    // MT_GET_DATA_ACK(DT_KEYMAP, keymap_data, 5);
-                    break;
-                }
+                //     // MT_GET_DATA_ACK(DT_KEYMAP, keymap_data, 5);
+                //     break;
+                // }
                 default:
                     break;
             }

quantum/api/api_sysex.c

@@ -1,4 +1,6 @@
 #include "api_sysex.h"
+#include "sysex_tools.h"
+#include "print.h"
 
 void send_bytes_sysex(uint8_t message_type, uint8_t data_type, uint8_t * bytes, uint16_t length) {
     // SEND_STRING("\nTX: ");
@@ -6,24 +8,50 @@ void send_bytes_sysex(uint8_t message_type, uint8_t data_type, uint8_t * bytes,
     //     send_byte(bytes[i]);
     //     SEND_STRING(" ");
     // }
-    uint8_t * precode = malloc(sizeof(uint8_t) * (length + 2));
-    precode[0] = message_type;
-    precode[1] = data_type;
-    memcpy(precode + 2, bytes, length);
-    uint8_t * encoded = malloc(sizeof(uint8_t) * (sysex_encoded_length(length + 2)));
-    uint16_t encoded_length = sysex_encode(encoded, precode, length + 2);
-    uint8_t * array = malloc(sizeof(uint8_t) * (encoded_length + 5));
-    array[0] = 0xF0;
-    array[1] = 0x00;
-    array[2] = 0x00;
-    array[3] = 0x00;
-    array[encoded_length + 4] = 0xF7;
-    memcpy(array + 4, encoded, encoded_length);
-    midi_send_array(&midi_device, encoded_length + 5, array);
+    if (length > API_SYSEX_MAX_SIZE) {
+        xprintf("Sysex msg too big %d %d %d", message_type, data_type, length);
+        return;
+    }
+
+
+    // The buffer size required is calculated as the following
+    // API_SYSEX_MAX_SIZE is the maximum length
+    // In addition to that we have a two byte message header consisting of the message_type and data_type
+    // This has to be encoded with an additional overhead of one byte for every starting 7 bytes
+    // We just add one extra byte in case it's not divisible by 7
+    // Then we have an unencoded header consisting of 4 bytes
+    // Plus a one byte terminator
+    const unsigned message_header = 2;
+    const unsigned unencoded_message = API_SYSEX_MAX_SIZE + message_header;
+    const unsigned encoding_overhead = unencoded_message / 7 + 1;
+    const unsigned encoded_size = unencoded_message + encoding_overhead;
+    const unsigned unencoded_header = 4;
+    const unsigned terminator = 1;
+    const unsigned buffer_size = encoded_size + unencoded_header + terminator;
+    uint8_t buffer[encoded_size + unencoded_header + terminator];
+    // The unencoded header
+    buffer[0] = 0xF0;
+    buffer[1] = 0x00;
+    buffer[2] = 0x00;
+    buffer[3] = 0x00;
+
+    // We copy the message to the end of the array, this way we can do an inplace encoding, using the same
+    // buffer for both input and output
+    const unsigned message_size = length + message_header;
+    uint8_t* unencoded_start = buffer + buffer_size - message_size;
+    uint8_t* ptr = unencoded_start;
+    *(ptr++) = message_type;
+    *(ptr++) = data_type;
+    memcpy(ptr, bytes, length);
+
+    unsigned encoded_length = sysex_encode(buffer + unencoded_header, unencoded_start, message_size);
+    unsigned final_size = unencoded_header + encoded_length + terminator;
+    buffer[final_size - 1] = 0xF7;
+    midi_send_array(&midi_device, final_size, buffer);
 
     // SEND_STRING("\nTD: ");
     // for (uint8_t i = 0; i < encoded_length + 5; i++) {
-    //     send_byte(array[i]);
+    //     send_byte(buffer[i]);
     //     SEND_STRING(" ");
     // }
 }

quantum/audio/audio.c

@@ -77,6 +77,7 @@ static bool audio_initialized = false;
 audio_config_t audio_config;
 
 uint16_t envelope_index = 0;
+bool glissando = true;
 
 void audio_init()
 {
@@ -205,10 +206,14 @@ ISR(TIMER3_COMPA_vect)
 					freq = frequencies[voice_place];
 				#endif
 			} else {
-				if (frequency != 0 && frequency < frequencies[voices - 1] && frequency < frequencies[voices - 1] * pow(2, -440/frequencies[voices - 1]/12/2)) {
-					frequency = frequency * pow(2, 440/frequency/12/2);
-				} else if (frequency != 0 && frequency > frequencies[voices - 1] && frequency > frequencies[voices - 1] * pow(2, 440/frequencies[voices - 1]/12/2)) {
-					frequency = frequency * pow(2, -440/frequency/12/2);
+				if (glissando) {
+					if (frequency != 0 && frequency < frequencies[voices - 1] && frequency < frequencies[voices - 1] * pow(2, -440/frequencies[voices - 1]/12/2)) {
+						frequency = frequency * pow(2, 440/frequency/12/2);
+					} else if (frequency != 0 && frequency > frequencies[voices - 1] && frequency > frequencies[voices - 1] * pow(2, 440/frequencies[voices - 1]/12/2)) {
+						frequency = frequency * pow(2, -440/frequency/12/2);
+					} else {
+						frequency = frequencies[voices - 1];
+					}
 				} else {
 					frequency = frequencies[voices - 1];
 				}				

quantum/audio/voices.c

@@ -6,6 +6,7 @@
 extern uint16_t envelope_index;
 extern float note_timbre;
 extern float polyphony_rate;
+extern bool glissando;
 
 voice_type voice = default_voice;
 
@@ -27,11 +28,15 @@ float voice_envelope(float frequency) {
 
     switch (voice) {
         case default_voice:
+            glissando = true;
             note_timbre = TIMBRE_50;
             polyphony_rate = 0;
 	        break;
 
+    #ifdef AUDIO_VOICES
+
         case something:
+            glissando = false;
             polyphony_rate = 0;
             switch (compensated_index) {
                 case 0 ... 9:
@@ -43,16 +48,102 @@ float voice_envelope(float frequency) {
                     break;
 
                 case 20 ... 200:
-                    note_timbre = .25 + .125 + pow(((float)compensated_index - 20) / (200 - 20), 2)*.125;
+                    note_timbre = .125 + .125;
                     break;
 
                 default:
-                    note_timbre = .25;
+                    note_timbre = .125;
                     break;
             }
             break;
 
+        case drums:
+            glissando = false;
+            polyphony_rate = 0;
+                // switch (compensated_index) {
+                //     case 0 ... 10:
+                //         note_timbre = 0.5;
+                //         break;
+                //     case 11 ... 20:
+                //         note_timbre = 0.5 * (21 - compensated_index) / 10;
+                //         break;
+                //     default:
+                //         note_timbre = 0;
+                //         break;
+                // }
+                // frequency = (rand() % (int)(frequency * 1.2 - frequency)) + (frequency * 0.8);
+
+            if (frequency < 80.0) {
+
+            } else if (frequency < 160.0) {
+
+                // Bass drum: 60 - 100 Hz
+                frequency = (rand() % (int)(40)) + 60;
+                switch (envelope_index) {
+                    case 0 ... 10:
+                        note_timbre = 0.5;
+                        break;
+                    case 11 ... 20:
+                        note_timbre = 0.5 * (21 - envelope_index) / 10;
+                        break;
+                    default:
+                        note_timbre = 0;
+                        break;
+                }
+
+            } else if (frequency < 320.0) {
+
+
+                // Snare drum: 1 - 2 KHz
+                frequency = (rand() % (int)(1000)) + 1000;
+                switch (envelope_index) {
+                    case 0 ... 5:
+                        note_timbre = 0.5;
+                        break;
+                    case 6 ... 20:
+                        note_timbre = 0.5 * (21 - envelope_index) / 15;
+                        break;
+                    default:
+                        note_timbre = 0;
+                        break;
+                }
+
+            } else if (frequency < 640.0) {
+
+                // Closed Hi-hat: 3 - 5 KHz
+                frequency = (rand() % (int)(2000)) + 3000;
+                switch (envelope_index) {
+                    case 0 ... 15:
+                        note_timbre = 0.5;
+                        break;
+                    case 16 ... 20:
+                        note_timbre = 0.5 * (21 - envelope_index) / 5;
+                        break;
+                    default:
+                        note_timbre = 0;
+                        break;
+                }
+
+            } else if (frequency < 1280.0) {
+
+                // Open Hi-hat: 3 - 5 KHz
+                frequency = (rand() % (int)(2000)) + 3000;
+                switch (envelope_index) {
+                    case 0 ... 35:
+                        note_timbre = 0.5;
+                        break;
+                    case 36 ... 50:
+                        note_timbre = 0.5 * (51 - envelope_index) / 15;
+                        break;
+                    default:
+                        note_timbre = 0;
+                        break;
+                }
+
+            }
+            break;
         case butts_fader:
+            glissando = true;
             polyphony_rate = 0;
             switch (compensated_index) {
                 case 0 ... 9:
@@ -100,6 +191,7 @@ float voice_envelope(float frequency) {
 
         case duty_osc:
             // This slows the loop down a substantial amount, so higher notes may freeze
+            glissando = true;
             polyphony_rate = 0;
             switch (compensated_index) {
                 default:
@@ -114,6 +206,7 @@ float voice_envelope(float frequency) {
 	        break;
 
         case duty_octave_down:
+            glissando = true;
             polyphony_rate = 0;
             note_timbre = (envelope_index % 2) * .125 + .375 * 2;
             if ((envelope_index % 4) == 0)
@@ -122,6 +215,7 @@ float voice_envelope(float frequency) {
                 note_timbre = 0;
             break;
         case delayed_vibrato:
+            glissando = true;
             polyphony_rate = 0;
             note_timbre = TIMBRE_50;
             #define VOICE_VIBRATO_DELAY 150
@@ -176,11 +270,11 @@ float voice_envelope(float frequency) {
         //         note_timbre = 0.25;
         //     break;
 
+    #endif
+
 		default:
    			break;
     }
 
     return frequency;
 }
-
-

quantum/audio/voices.h

@@ -11,7 +11,9 @@ float voice_envelope(float frequency);
 
 typedef enum {
     default_voice,
+    #ifdef AUDIO_VOICES
     something,
+    drums,
     butts_fader,
     octave_crunch,
     duty_osc,
@@ -22,6 +24,7 @@ typedef enum {
     // duty_fourth_down,
     // duty_third_down,
     // duty_fifth_third_down,
+    #endif
     number_of_voices // important that this is last
 } voice_type;
 

quantum/config_common.h

@@ -80,4 +80,6 @@
 #   endif
 #endif
 
+#define API_SYSEX_MAX_SIZE 32
+
 #endif

quantum/keymap.h

@@ -38,317 +38,16 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RESET QK_RESET
 #endif
 
-/* translates key to keycode */
+#include "quantum_keycodes.h"
+
+// translates key to keycode
 uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t key);
 
+// translates function id to action
+uint16_t keymap_function_id_to_action( uint16_t function_id );
+
 extern const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
 extern const uint16_t fn_actions[];
 
-enum quantum_keycodes {
-    // Ranges used in shortucuts - not to be used directly
-    QK_TMK                = 0x0000,
-    QK_TMK_MAX            = 0x00FF,
-    QK_MODS               = 0x0100,
-    QK_LCTL               = 0x0100,
-    QK_LSFT               = 0x0200,
-    QK_LALT               = 0x0400,
-    QK_LGUI               = 0x0800,
-    QK_RCTL               = 0x1100,
-    QK_RSFT               = 0x1200,
-    QK_RALT               = 0x1400,
-    QK_RGUI               = 0x1800,
-    QK_MODS_MAX           = 0x1FFF,
-    QK_FUNCTION           = 0x2000,
-    QK_FUNCTION_MAX       = 0x2FFF,
-    QK_MACRO              = 0x3000,
-    QK_MACRO_MAX          = 0x3FFF,
-    QK_LAYER_TAP          = 0x4000,
-    QK_LAYER_TAP_MAX      = 0x4FFF,
-    QK_TO                 = 0x5000,
-    QK_TO_MAX             = 0x50FF,
-    QK_MOMENTARY          = 0x5100,
-    QK_MOMENTARY_MAX      = 0x51FF,
-    QK_DEF_LAYER          = 0x5200,
-    QK_DEF_LAYER_MAX      = 0x52FF,
-    QK_TOGGLE_LAYER       = 0x5300,
-    QK_TOGGLE_LAYER_MAX   = 0x53FF,
-    QK_ONE_SHOT_LAYER     = 0x5400,
-    QK_ONE_SHOT_LAYER_MAX = 0x54FF,
-    QK_ONE_SHOT_MOD       = 0x5500,
-    QK_ONE_SHOT_MOD_MAX   = 0x55FF,
-#ifndef DISABLE_CHORDING
-    QK_CHORDING           = 0x5600,
-    QK_CHORDING_MAX       = 0x56FF,
-#endif
-    QK_MOD_TAP            = 0x6000,
-    QK_MOD_TAP_MAX        = 0x6FFF,
-    QK_TAP_DANCE          = 0x7100,
-    QK_TAP_DANCE_MAX      = 0x71FF,
-#ifdef UNICODEMAP_ENABLE
-    QK_UNICODE_MAP        = 0x7800,
-    QK_UNICODE_MAP_MAX    = 0x7FFF,
-#endif
-#ifdef UNICODE_ENABLE
-    QK_UNICODE            = 0x8000,
-    QK_UNICODE_MAX        = 0xFFFF,
-#endif
-
-    // Loose keycodes - to be used directly
-
-    RESET = 0x7000,
-    DEBUG,
-    MAGIC_SWAP_CONTROL_CAPSLOCK,
-    MAGIC_CAPSLOCK_TO_CONTROL,
-    MAGIC_SWAP_LALT_LGUI,
-    MAGIC_SWAP_RALT_RGUI,
-    MAGIC_NO_GUI,
-    MAGIC_SWAP_GRAVE_ESC,
-    MAGIC_SWAP_BACKSLASH_BACKSPACE,
-    MAGIC_HOST_NKRO,
-    MAGIC_SWAP_ALT_GUI,
-    MAGIC_UNSWAP_CONTROL_CAPSLOCK,
-    MAGIC_UNCAPSLOCK_TO_CONTROL,
-    MAGIC_UNSWAP_LALT_LGUI,
-    MAGIC_UNSWAP_RALT_RGUI,
-    MAGIC_UNNO_GUI,
-    MAGIC_UNSWAP_GRAVE_ESC,
-    MAGIC_UNSWAP_BACKSLASH_BACKSPACE,
-    MAGIC_UNHOST_NKRO,
-    MAGIC_UNSWAP_ALT_GUI,
-    MAGIC_TOGGLE_NKRO,
-
-    // Leader key
-#ifndef DISABLE_LEADER
-    KC_LEAD,
-#endif
-
-    // Audio on/off/toggle
-    AU_ON,
-    AU_OFF,
-    AU_TOG,
-
-    // Music mode on/off/toggle
-    MU_ON,
-    MU_OFF,
-    MU_TOG,
-
-    // Music voice iterate
-    MUV_IN,
-    MUV_DE,
-
-    // Midi mode on/off
-    MIDI_ON,
-    MIDI_OFF,
-
-    // Backlight functionality
-    BL_0,
-    BL_1,
-    BL_2,
-    BL_3,
-    BL_4,
-    BL_5,
-    BL_6,
-    BL_7,
-    BL_8,
-    BL_9,
-    BL_10,
-    BL_11,
-    BL_12,
-    BL_13,
-    BL_14,
-    BL_15,
-    BL_DEC,
-    BL_INC,
-    BL_TOGG,
-    BL_STEP,
-
-    // RGB functionality
-    RGB_TOG,
-    RGB_MOD,
-    RGB_HUI,
-    RGB_HUD,
-    RGB_SAI,
-    RGB_SAD,
-    RGB_VAI,
-    RGB_VAD,
-
-    // Left shift, open paren
-    KC_LSPO,
-
-    // Right shift, close paren
-    KC_RSPC,
-
-    // Printing
-    PRINT_ON,
-    PRINT_OFF,
-
-    // always leave at the end
-    SAFE_RANGE
-};
-
-// Ability to use mods in layouts
-#define LCTL(kc) (kc | QK_LCTL)
-#define LSFT(kc) (kc | QK_LSFT)
-#define LALT(kc) (kc | QK_LALT)
-#define LGUI(kc) (kc | QK_LGUI)
-#define RCTL(kc) (kc | QK_RCTL)
-#define RSFT(kc) (kc | QK_RSFT)
-#define RALT(kc) (kc | QK_RALT)
-#define RGUI(kc) (kc | QK_RGUI)
-
-#define HYPR(kc) (kc | QK_LCTL | QK_LSFT | QK_LALT | QK_LGUI)
-#define MEH(kc)  (kc | QK_LCTL | QK_LSFT | QK_LALT)
-#define LCAG(kc) (kc | QK_LCTL | QK_LALT | QK_LGUI)
-#define ALTG(kc) (kc | QK_RCTL | QK_RALT)
-
-#define MOD_HYPR 0xf
-#define MOD_MEH 0x7
-
-
-// Aliases for shifted symbols
-// Each key has a 4-letter code, and some have longer aliases too.
-// While the long aliases are descriptive, the 4-letter codes
-// make for nicer grid layouts (everything lines up), and are
-// the preferred style for Quantum.
-#define KC_TILD LSFT(KC_GRV)    // ~
-#define KC_TILDE    KC_TILD
-
-#define KC_EXLM LSFT(KC_1)      // !
-#define KC_EXCLAIM  KC_EXLM
-
-#define KC_AT   LSFT(KC_2)      // @
-
-#define KC_HASH LSFT(KC_3)      // #
-
-#define KC_DLR  LSFT(KC_4)      // $
-#define KC_DOLLAR   KC_DLR
-
-#define KC_PERC LSFT(KC_5)      // %
-#define KC_PERCENT  KC_PERC
-
-#define KC_CIRC LSFT(KC_6)      // ^
-#define KC_CIRCUMFLEX   KC_CIRC
-
-#define KC_AMPR LSFT(KC_7)      // &
-#define KC_AMPERSAND    KC_AMPR
-
-#define KC_ASTR LSFT(KC_8)      // *
-#define KC_ASTERISK KC_ASTR
-
-#define KC_LPRN LSFT(KC_9)      // (
-#define KC_LEFT_PAREN   KC_LPRN
-
-#define KC_RPRN LSFT(KC_0)      // )
-#define KC_RIGHT_PAREN  KC_RPRN
-
-#define KC_UNDS LSFT(KC_MINS)   // _
-#define KC_UNDERSCORE   KC_UNDS
-
-#define KC_PLUS LSFT(KC_EQL)    // +
-
-#define KC_LCBR LSFT(KC_LBRC)   // {
-#define KC_LEFT_CURLY_BRACE KC_LCBR
-
-#define KC_RCBR LSFT(KC_RBRC)   // }
-#define KC_RIGHT_CURLY_BRACE    KC_RCBR
-
-#define KC_LABK LSFT(KC_COMM)   // <
-#define KC_LEFT_ANGLE_BRACKET   KC_LABK
-
-#define KC_RABK LSFT(KC_DOT)    // >
-#define KC_RIGHT_ANGLE_BRACKET  KC_RABK
-
-#define KC_COLN LSFT(KC_SCLN)   // :
-#define KC_COLON    KC_COLN
-
-#define KC_PIPE LSFT(KC_BSLS)   // |
-
-#define KC_LT LSFT(KC_COMM)     // <
-
-#define KC_GT LSFT(KC_DOT)      // >
-
-#define KC_QUES LSFT(KC_SLSH)   // ?
-#define KC_QUESTION KC_QUES
-
-#define KC_DQT LSFT(KC_QUOT)   // "
-#define KC_DOUBLE_QUOTE KC_DQT
-#define KC_DQUO KC_DQT
-
-#define KC_DELT KC_DELETE // Del key (four letter code)
-
-// Alias for function layers than expand past FN31
-#define FUNC(kc) (kc | QK_FUNCTION)
-
-// Aliases
-#define S(kc) LSFT(kc)
-#define F(kc) FUNC(kc)
-
-#define M(kc) (kc | QK_MACRO)
-
-#define MACRODOWN(...) (record->event.pressed ? MACRO(__VA_ARGS__) : MACRO_NONE)
-
-// L-ayer, T-ap - 256 keycode max, 16 layer max
-#define LT(layer, kc) (kc | QK_LAYER_TAP | ((layer & 0xF) << 8))
-
-#define AG_SWAP MAGIC_SWAP_ALT_GUI
-#define AG_NORM MAGIC_UNSWAP_ALT_GUI
-
-#define BL_ON  BL_9
-#define BL_OFF BL_0
-
-#define MI_ON MIDI_ON
-#define MI_OFF MIDI_OFF
-
-// GOTO layer - 16 layers max
-// when:
-// ON_PRESS    = 1
-// ON_RELEASE  = 2
-// Unless you have a good reason not to do so, prefer  ON_PRESS (1) as your default.
-// In fact, we changed it to assume ON_PRESS for sanity/simplicity. If needed, you can add your own
-// keycode modeled after the old version, kept below for this.
-/* #define TO(layer, when) (layer | QK_TO | (when << 0x4)) */
-#define TO(layer) (layer | QK_TO | (ON_PRESS << 0x4))
-
-// Momentary switch layer - 256 layer max
-#define MO(layer) (layer | QK_MOMENTARY)
-
-// Set default layer - 256 layer max
-#define DF(layer) (layer | QK_DEF_LAYER)
-
-// Toggle to layer - 256 layer max
-#define TG(layer) (layer | QK_TOGGLE_LAYER)
-
-// One-shot layer - 256 layer max
-#define OSL(layer) (layer | QK_ONE_SHOT_LAYER)
-
-// One-shot mod
-#define OSM(mod) (mod | QK_ONE_SHOT_MOD)
-
-// M-od, T-ap - 256 keycode max
-#define MT(mod, kc) (kc | QK_MOD_TAP | ((mod & 0xF) << 8))
-#define CTL_T(kc) MT(MOD_LCTL, kc)
-#define SFT_T(kc) MT(MOD_LSFT, kc)
-#define ALT_T(kc) MT(MOD_LALT, kc)
-#define GUI_T(kc) MT(MOD_LGUI, kc)
-#define C_S_T(kc) MT((MOD_LCTL | MOD_LSFT), kc) // Control + Shift e.g. for gnome-terminal
-#define MEH_T(kc) MT((MOD_LCTL | MOD_LSFT | MOD_LALT), kc) // Meh is a less hyper version of the Hyper key -- doesn't include Win or Cmd, so just alt+shift+ctrl
-#define LCAG_T(kc) MT((MOD_LCTL | MOD_LALT | MOD_LGUI), kc) // Left control alt and gui
-#define ALL_T(kc) MT((MOD_LCTL | MOD_LSFT | MOD_LALT | MOD_LGUI), kc) // see http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/
-
-// Dedicated keycode versions for Hyper and Meh, if you want to use them as standalone keys rather than mod-tap
-#define KC_HYPR HYPR(KC_NO)
-#define KC_MEH  MEH(KC_NO)
-
-#ifdef UNICODE_ENABLE
-    // For sending unicode codes.
-    // You may not send codes over 7FFF -- this supports most of UTF8.
-    // To have a key that sends out Œ, go UC(0x0152)
-    #define UNICODE(n) (n | QK_UNICODE)
-    #define UC(n) UNICODE(n)
-#endif
-
-#ifdef UNICODEMAP_ENABLE
-    #define X(n) (n | QK_UNICODE_MAP)
-#endif
 
 #endif

quantum/keymap_common.c

@@ -48,12 +48,10 @@ action_t action_for_key(uint8_t layer, keypos_t key)
 
     action_t action;
     uint8_t action_layer, when, mod;
-    // The arm-none-eabi compiler generates out of bounds warnings when using the fn_actions directly for some reason
-    const uint16_t* actions = fn_actions;
 
     switch (keycode) {
         case KC_FN0 ... KC_FN31:
-            action.code = pgm_read_word(&actions[FN_INDEX(keycode)]);
+            action.code = keymap_function_id_to_action(FN_INDEX(keycode));
             break;
         case KC_A ... KC_EXSEL:
         case KC_LCTRL ... KC_RGUI:
@@ -79,7 +77,7 @@ action_t action_for_key(uint8_t layer, keypos_t key)
         case QK_FUNCTION ... QK_FUNCTION_MAX: ;
             // Is a shortcut for function action_layer, pull last 12bits
             // This means we have 4,096 FN macros at our disposal
-            action.code = pgm_read_word(&actions[(int)keycode & 0xFFF]);
+            action.code = keymap_function_id_to_action( (int)keycode & 0xFFF );
             break;
         case QK_MACRO ... QK_MACRO_MAX:
             action.code = ACTION_MACRO(keycode & 0xFF);
@@ -163,9 +161,17 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
 {
 }
 
-/* translates key to keycode */
+// translates key to keycode
+__attribute__ ((weak))
 uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
 {
     // Read entire word (16bits)
     return pgm_read_word(&keymaps[(layer)][(key.row)][(key.col)]);
 }
+
+// translates function id to action
+__attribute__ ((weak))
+uint16_t keymap_function_id_to_action( uint16_t function_id )
+{
+	return pgm_read_word(&fn_actions[function_id]);
+}

quantum/light_ws2812.h

@@ -18,13 +18,6 @@
 //#include "ws2812_config.h"
 //#include "i2cmaster.h"
 
-#define LIGHT_I2C 1
-#define LIGHT_I2C_ADDR        0x84
-#define LIGHT_I2C_ADDR_WRITE  ( (LIGHT_I2C_ADDR<<1) | I2C_WRITE )
-#define LIGHT_I2C_ADDR_READ   ( (LIGHT_I2C_ADDR<<1) | I2C_READ  )
-
-#define RGBW 1
-
 #ifdef RGBW
   #define LED_TYPE struct cRGBW
 #else

quantum/process_keycode/process_music.c

@@ -115,7 +115,16 @@ bool process_music(uint16_t keycode, keyrecord_t *record) {
         return false;
       }
 
+      #ifdef MUSIC_MODE_CHROMATIC
+      float freq = ((float)220.0)*pow(2.0, -5.0)*pow(2.0,(music_starting_note + record->event.key.col + music_offset)/12.0+(MATRIX_ROWS - record->event.key.row));
+      #elif defined(MUSIC_MODE_GUITAR)
+      float freq = ((float)220.0)*pow(2.0, -5.0)*pow(2.0,(music_starting_note + record->event.key.col + music_offset)/12.0+(float)(MATRIX_ROWS - record->event.key.row + 7)*5.0/12);
+      #elif defined(MUSIC_MODE_VIOLIN)
+      float freq = ((float)220.0)*pow(2.0, -5.0)*pow(2.0,(music_starting_note + record->event.key.col + music_offset)/12.0+(float)(MATRIX_ROWS - record->event.key.row + 5)*7.0/12);
+      #else
       float freq = ((float)220.0)*pow(2.0, -5.0)*pow(2.0,(music_starting_note + SCALE[record->event.key.col + music_offset])/12.0+(MATRIX_ROWS - record->event.key.row));
+      #endif
+
       if (record->event.pressed) {
         play_note(freq, 0xF);
         if (music_sequence_recording) {

quantum/quantum.c

@@ -21,6 +21,8 @@ static void do_code16 (uint16_t code, void (*f) (uint8_t)) {
   if (code & QK_LGUI)
     f(KC_LGUI);
 
+  if (code < QK_RMODS_MIN) return;
+
   if (code & QK_RCTL)
     f(KC_RCTL);
   if (code & QK_RSFT)

quantum/quantum_keycodes.h

@@ -0,0 +1,313 @@
+
+#ifndef QUANTUM_KEYCODES_H
+#define QUANTUM_KEYCODES_H
+
+enum quantum_keycodes {
+    // Ranges used in shortucuts - not to be used directly
+    QK_TMK                = 0x0000,
+    QK_TMK_MAX            = 0x00FF,
+    QK_MODS               = 0x0100,
+    QK_LCTL               = 0x0100,
+    QK_LSFT               = 0x0200,
+    QK_LALT               = 0x0400,
+    QK_LGUI               = 0x0800,
+    QK_RMODS_MIN          = 0x1000,
+    QK_RCTL               = 0x1100,
+    QK_RSFT               = 0x1200,
+    QK_RALT               = 0x1400,
+    QK_RGUI               = 0x1800,
+    QK_MODS_MAX           = 0x1FFF,
+    QK_FUNCTION           = 0x2000,
+    QK_FUNCTION_MAX       = 0x2FFF,
+    QK_MACRO              = 0x3000,
+    QK_MACRO_MAX          = 0x3FFF,
+    QK_LAYER_TAP          = 0x4000,
+    QK_LAYER_TAP_MAX      = 0x4FFF,
+    QK_TO                 = 0x5000,
+    QK_TO_MAX             = 0x50FF,
+    QK_MOMENTARY          = 0x5100,
+    QK_MOMENTARY_MAX      = 0x51FF,
+    QK_DEF_LAYER          = 0x5200,
+    QK_DEF_LAYER_MAX      = 0x52FF,
+    QK_TOGGLE_LAYER       = 0x5300,
+    QK_TOGGLE_LAYER_MAX   = 0x53FF,
+    QK_ONE_SHOT_LAYER     = 0x5400,
+    QK_ONE_SHOT_LAYER_MAX = 0x54FF,
+    QK_ONE_SHOT_MOD       = 0x5500,
+    QK_ONE_SHOT_MOD_MAX   = 0x55FF,
+#ifndef DISABLE_CHORDING
+    QK_CHORDING           = 0x5600,
+    QK_CHORDING_MAX       = 0x56FF,
+#endif
+    QK_MOD_TAP            = 0x6000,
+    QK_MOD_TAP_MAX        = 0x6FFF,
+    QK_TAP_DANCE          = 0x7100,
+    QK_TAP_DANCE_MAX      = 0x71FF,
+#ifdef UNICODEMAP_ENABLE
+    QK_UNICODE_MAP        = 0x7800,
+    QK_UNICODE_MAP_MAX    = 0x7FFF,
+#endif
+#ifdef UNICODE_ENABLE
+    QK_UNICODE            = 0x8000,
+    QK_UNICODE_MAX        = 0xFFFF,
+#endif
+
+    // Loose keycodes - to be used directly
+
+    RESET = 0x7000,
+    DEBUG,
+    MAGIC_SWAP_CONTROL_CAPSLOCK,
+    MAGIC_CAPSLOCK_TO_CONTROL,
+    MAGIC_SWAP_LALT_LGUI,
+    MAGIC_SWAP_RALT_RGUI,
+    MAGIC_NO_GUI,
+    MAGIC_SWAP_GRAVE_ESC,
+    MAGIC_SWAP_BACKSLASH_BACKSPACE,
+    MAGIC_HOST_NKRO,
+    MAGIC_SWAP_ALT_GUI,
+    MAGIC_UNSWAP_CONTROL_CAPSLOCK,
+    MAGIC_UNCAPSLOCK_TO_CONTROL,
+    MAGIC_UNSWAP_LALT_LGUI,
+    MAGIC_UNSWAP_RALT_RGUI,
+    MAGIC_UNNO_GUI,
+    MAGIC_UNSWAP_GRAVE_ESC,
+    MAGIC_UNSWAP_BACKSLASH_BACKSPACE,
+    MAGIC_UNHOST_NKRO,
+    MAGIC_UNSWAP_ALT_GUI,
+    MAGIC_TOGGLE_NKRO,
+
+    // Leader key
+#ifndef DISABLE_LEADER
+    KC_LEAD,
+#endif
+
+    // Audio on/off/toggle
+    AU_ON,
+    AU_OFF,
+    AU_TOG,
+
+    // Music mode on/off/toggle
+    MU_ON,
+    MU_OFF,
+    MU_TOG,
+
+    // Music voice iterate
+    MUV_IN,
+    MUV_DE,
+
+    // Midi mode on/off
+    MIDI_ON,
+    MIDI_OFF,
+
+    // Backlight functionality
+    BL_0,
+    BL_1,
+    BL_2,
+    BL_3,
+    BL_4,
+    BL_5,
+    BL_6,
+    BL_7,
+    BL_8,
+    BL_9,
+    BL_10,
+    BL_11,
+    BL_12,
+    BL_13,
+    BL_14,
+    BL_15,
+    BL_DEC,
+    BL_INC,
+    BL_TOGG,
+    BL_STEP,
+
+    // RGB functionality
+    RGB_TOG,
+    RGB_MOD,
+    RGB_HUI,
+    RGB_HUD,
+    RGB_SAI,
+    RGB_SAD,
+    RGB_VAI,
+    RGB_VAD,
+
+    // Left shift, open paren
+    KC_LSPO,
+
+    // Right shift, close paren
+    KC_RSPC,
+
+    // Printing
+    PRINT_ON,
+    PRINT_OFF,
+
+    // always leave at the end
+    SAFE_RANGE
+};
+
+// Ability to use mods in layouts
+#define LCTL(kc) (kc | QK_LCTL)
+#define LSFT(kc) (kc | QK_LSFT)
+#define LALT(kc) (kc | QK_LALT)
+#define LGUI(kc) (kc | QK_LGUI)
+#define RCTL(kc) (kc | QK_RCTL)
+#define RSFT(kc) (kc | QK_RSFT)
+#define RALT(kc) (kc | QK_RALT)
+#define RGUI(kc) (kc | QK_RGUI)
+
+#define HYPR(kc) (kc | QK_LCTL | QK_LSFT | QK_LALT | QK_LGUI)
+#define MEH(kc)  (kc | QK_LCTL | QK_LSFT | QK_LALT)
+#define LCAG(kc) (kc | QK_LCTL | QK_LALT | QK_LGUI)
+#define ALTG(kc) (kc | QK_RCTL | QK_RALT)
+
+#define MOD_HYPR 0xf
+#define MOD_MEH 0x7
+
+
+// Aliases for shifted symbols
+// Each key has a 4-letter code, and some have longer aliases too.
+// While the long aliases are descriptive, the 4-letter codes
+// make for nicer grid layouts (everything lines up), and are
+// the preferred style for Quantum.
+#define KC_TILD LSFT(KC_GRV)    // ~
+#define KC_TILDE    KC_TILD
+
+#define KC_EXLM LSFT(KC_1)      // !
+#define KC_EXCLAIM  KC_EXLM
+
+#define KC_AT   LSFT(KC_2)      // @
+
+#define KC_HASH LSFT(KC_3)      // #
+
+#define KC_DLR  LSFT(KC_4)      // $
+#define KC_DOLLAR   KC_DLR
+
+#define KC_PERC LSFT(KC_5)      // %
+#define KC_PERCENT  KC_PERC
+
+#define KC_CIRC LSFT(KC_6)      // ^
+#define KC_CIRCUMFLEX   KC_CIRC
+
+#define KC_AMPR LSFT(KC_7)      // &
+#define KC_AMPERSAND    KC_AMPR
+
+#define KC_ASTR LSFT(KC_8)      // *
+#define KC_ASTERISK KC_ASTR
+
+#define KC_LPRN LSFT(KC_9)      // (
+#define KC_LEFT_PAREN   KC_LPRN
+
+#define KC_RPRN LSFT(KC_0)      // )
+#define KC_RIGHT_PAREN  KC_RPRN
+
+#define KC_UNDS LSFT(KC_MINS)   // _
+#define KC_UNDERSCORE   KC_UNDS
+
+#define KC_PLUS LSFT(KC_EQL)    // +
+
+#define KC_LCBR LSFT(KC_LBRC)   // {
+#define KC_LEFT_CURLY_BRACE KC_LCBR
+
+#define KC_RCBR LSFT(KC_RBRC)   // }
+#define KC_RIGHT_CURLY_BRACE    KC_RCBR
+
+#define KC_LABK LSFT(KC_COMM)   // <
+#define KC_LEFT_ANGLE_BRACKET   KC_LABK
+
+#define KC_RABK LSFT(KC_DOT)    // >
+#define KC_RIGHT_ANGLE_BRACKET  KC_RABK
+
+#define KC_COLN LSFT(KC_SCLN)   // :
+#define KC_COLON    KC_COLN
+
+#define KC_PIPE LSFT(KC_BSLS)   // |
+
+#define KC_LT LSFT(KC_COMM)     // <
+
+#define KC_GT LSFT(KC_DOT)      // >
+
+#define KC_QUES LSFT(KC_SLSH)   // ?
+#define KC_QUESTION KC_QUES
+
+#define KC_DQT LSFT(KC_QUOT)   // "
+#define KC_DOUBLE_QUOTE KC_DQT
+#define KC_DQUO KC_DQT
+
+#define KC_DELT KC_DELETE // Del key (four letter code)
+
+// Alias for function layers than expand past FN31
+#define FUNC(kc) (kc | QK_FUNCTION)
+
+// Aliases
+#define S(kc) LSFT(kc)
+#define F(kc) FUNC(kc)
+
+#define M(kc) (kc | QK_MACRO)
+
+#define MACRODOWN(...) (record->event.pressed ? MACRO(__VA_ARGS__) : MACRO_NONE)
+
+// L-ayer, T-ap - 256 keycode max, 16 layer max
+#define LT(layer, kc) (kc | QK_LAYER_TAP | ((layer & 0xF) << 8))
+
+#define AG_SWAP MAGIC_SWAP_ALT_GUI
+#define AG_NORM MAGIC_UNSWAP_ALT_GUI
+
+#define BL_ON  BL_9
+#define BL_OFF BL_0
+
+#define MI_ON MIDI_ON
+#define MI_OFF MIDI_OFF
+
+// GOTO layer - 16 layers max
+// when:
+// ON_PRESS    = 1
+// ON_RELEASE  = 2
+// Unless you have a good reason not to do so, prefer  ON_PRESS (1) as your default.
+// In fact, we changed it to assume ON_PRESS for sanity/simplicity. If needed, you can add your own
+// keycode modeled after the old version, kept below for this.
+/* #define TO(layer, when) (layer | QK_TO | (when << 0x4)) */
+#define TO(layer) (layer | QK_TO | (ON_PRESS << 0x4))
+
+// Momentary switch layer - 256 layer max
+#define MO(layer) (layer | QK_MOMENTARY)
+
+// Set default layer - 256 layer max
+#define DF(layer) (layer | QK_DEF_LAYER)
+
+// Toggle to layer - 256 layer max
+#define TG(layer) (layer | QK_TOGGLE_LAYER)
+
+// One-shot layer - 256 layer max
+#define OSL(layer) (layer | QK_ONE_SHOT_LAYER)
+
+// One-shot mod
+#define OSM(mod) (mod | QK_ONE_SHOT_MOD)
+
+// M-od, T-ap - 256 keycode max
+#define MT(mod, kc) (kc | QK_MOD_TAP | ((mod & 0xF) << 8))
+#define CTL_T(kc) MT(MOD_LCTL, kc)
+#define SFT_T(kc) MT(MOD_LSFT, kc)
+#define ALT_T(kc) MT(MOD_LALT, kc)
+#define GUI_T(kc) MT(MOD_LGUI, kc)
+#define C_S_T(kc) MT((MOD_LCTL | MOD_LSFT), kc) // Control + Shift e.g. for gnome-terminal
+#define MEH_T(kc) MT((MOD_LCTL | MOD_LSFT | MOD_LALT), kc) // Meh is a less hyper version of the Hyper key -- doesn't include Win or Cmd, so just alt+shift+ctrl
+#define LCAG_T(kc) MT((MOD_LCTL | MOD_LALT | MOD_LGUI), kc) // Left control alt and gui
+#define ALL_T(kc) MT((MOD_LCTL | MOD_LSFT | MOD_LALT | MOD_LGUI), kc) // see http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/
+
+// Dedicated keycode versions for Hyper and Meh, if you want to use them as standalone keys rather than mod-tap
+#define KC_HYPR HYPR(KC_NO)
+#define KC_MEH  MEH(KC_NO)
+
+#ifdef UNICODE_ENABLE
+    // For sending unicode codes.
+    // You may not send codes over 7FFF -- this supports most of UTF8.
+    // To have a key that sends out Œ, go UC(0x0152)
+    #define UNICODE(n) (n | QK_UNICODE)
+    #define UC(n) UNICODE(n)
+#endif
+
+#ifdef UNICODEMAP_ENABLE
+    #define X(n) (n | QK_UNICODE_MAP)
+#endif
+
+#endif // QUANTUM_KEYCODES_H

quantum/rgblight.c

@@ -370,6 +370,7 @@ void rgblight_setrgb(uint8_t r, uint8_t g, uint8_t b) {
   rgblight_set();
 }
 
+__attribute__ ((weak))
 void rgblight_set(void) {
   if (rgblight_config.enable) {
     #ifdef RGBW
@@ -449,6 +450,9 @@ void rgblight_task(void) {
     } else if (rgblight_config.mode >= 21 && rgblight_config.mode <= 23) {
       // mode = 21 to 23, knight mode
       rgblight_effect_knight(rgblight_config.mode - 21);
+    } else {
+      // mode = 24, christmas mode
+      rgblight_effect_christmas();
     }
   }
 }
@@ -594,4 +598,22 @@ void rgblight_effect_knight(uint8_t interval) {
   }
 }
 
+
+void rgblight_effect_christmas(void) {
+  static uint16_t current_offset = 0;
+  static uint16_t last_timer = 0;
+  uint16_t hue;
+  uint8_t i;
+  if (timer_elapsed(last_timer) < 1000) {
+    return;
+  }
+  last_timer = timer_read();
+  current_offset = (current_offset + 1) % 2;
+  for (i = 0; i < RGBLED_NUM; i++) {
+    hue = 0 + ((RGBLED_NUM * (i + current_offset)) % 2) * 80;
+    sethsv(hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[i]);
+  }
+  rgblight_set();
+}
+
 #endif

quantum/rgblight.h

@@ -2,7 +2,7 @@
 #define RGBLIGHT_H
 
 #ifdef RGBLIGHT_ANIMATIONS
-	#define RGBLIGHT_MODES 23
+	#define RGBLIGHT_MODES 24
 #else
 	#define RGBLIGHT_MODES 1
 #endif
@@ -40,6 +40,8 @@
 #include "eeconfig.h"
 #include "light_ws2812.h"
 
+extern LED_TYPE led[RGBLED_NUM];
+
 extern const uint8_t RGBLED_BREATHING_INTERVALS[4] PROGMEM;
 extern const uint8_t RGBLED_RAINBOW_MOOD_INTERVALS[3] PROGMEM;
 extern const uint8_t RGBLED_RAINBOW_SWIRL_INTERVALS[3] PROGMEM;
@@ -98,5 +100,6 @@ void rgblight_effect_rainbow_mood(uint8_t interval);
 void rgblight_effect_rainbow_swirl(uint8_t interval);
 void rgblight_effect_snake(uint8_t interval);
 void rgblight_effect_knight(uint8_t interval);
+void rgblight_effect_christmas(void);
 
 #endif

tmk_core/common/keycode.h

@@ -85,7 +85,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define KC_LCAP KC_LOCKING_CAPS
 #define KC_LNUM KC_LOCKING_NUM
 #define KC_LSCR KC_LOCKING_SCROLL
-#define KC_ERAS KC_ALT_ERASE,
+#define KC_ERAS KC_ALT_ERASE
 #define KC_CLR  KC_CLEAR
 /* Japanese specific */
 #define KC_ZKHK KC_GRAVE

tmk_core/protocol/lufa/descriptor.c

@@ -143,10 +143,10 @@ const USB_Descriptor_HIDReport_Datatype_t PROGMEM ExtrakeyReport[] =
     HID_RI_USAGE(8, 0x80), /* System Control */
     HID_RI_COLLECTION(8, 0x01), /* Application */
         HID_RI_REPORT_ID(8, REPORT_ID_SYSTEM),
-        HID_RI_LOGICAL_MINIMUM(16, 0x0081),
-        HID_RI_LOGICAL_MAXIMUM(16, 0x00B7),
+        HID_RI_LOGICAL_MINIMUM(16, 0x0001),
+        HID_RI_LOGICAL_MAXIMUM(16, 0x0003),
         HID_RI_USAGE_MINIMUM(16, 0x0081), /* System Power Down */
-        HID_RI_USAGE_MAXIMUM(16, 0x00B7), /* System Display LCD Autoscale */
+        HID_RI_USAGE_MAXIMUM(16, 0x0083), /* System Wake Up */
         HID_RI_REPORT_SIZE(8, 16),
         HID_RI_REPORT_COUNT(8, 1),
         HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_ARRAY | HID_IOF_ABSOLUTE),

tmk_core/protocol/lufa/lufa.c

@@ -732,7 +732,7 @@ static void send_system(uint16_t data)
 
     report_extra_t r = {
         .report_id = REPORT_ID_SYSTEM,
-        .usage = data
+        .usage = data - SYSTEM_POWER_DOWN + 1
     };
     Endpoint_SelectEndpoint(EXTRAKEY_IN_EPNUM);
 
@@ -1252,28 +1252,40 @@ void cc_callback(MidiDevice * device,
   // midi_send_cc(device, (chan + 1) % 16, num, val);
 }
 
+#ifdef API_SYSEX_ENABLE
 uint8_t midi_buffer[MIDI_SYSEX_BUFFER] = {0};
+#endif
 
 void sysex_callback(MidiDevice * device, uint16_t start, uint8_t length, uint8_t * data) {
     #ifdef API_SYSEX_ENABLE
         // SEND_STRING("\n");
         // send_word(start);
         // SEND_STRING(": ");
+        // Don't store the header
+        int16_t pos = start - 4;
         for (uint8_t place = 0; place < length; place++) {
             // send_byte(*data);
-            midi_buffer[start + place] = *data;
-            if (*data == 0xF7) {
-                // SEND_STRING("\nRD: ");
-                // for (uint8_t i = 0; i < start + place + 1; i++){
-                //     send_byte(midi_buffer[i]);
-                // SEND_STRING(" ");
-                // }
-                uint8_t * decoded = malloc(sizeof(uint8_t) * (sysex_decoded_length(start + place - 4)));
-                uint16_t decode_length = sysex_decode(decoded, midi_buffer + 4, start + place - 4);
-                process_api(decode_length, decoded);
+            if (pos >= 0) {
+                if (*data == 0xF7) {
+                    // SEND_STRING("\nRD: ");
+                    // for (uint8_t i = 0; i < start + place + 1; i++){
+                    //     send_byte(midi_buffer[i]);
+                    // SEND_STRING(" ");
+                    // }
+                    const unsigned decoded_length = sysex_decoded_length(pos);
+                    uint8_t decoded[API_SYSEX_MAX_SIZE];
+                    sysex_decode(decoded, midi_buffer, pos);
+                    process_api(decoded_length, decoded);
+                    return;
+                }
+                else if (pos >= MIDI_SYSEX_BUFFER) {
+                    return;
+                }
+                midi_buffer[pos] = *data;
             }
             // SEND_STRING(" ");
             data++;
+            pos++;
         }
     #endif
 }

tmk_core/protocol/lufa/lufa.h

@@ -70,7 +70,6 @@ typedef struct {
 #ifdef MIDI_ENABLE
   void MIDI_Task(void);
   MidiDevice midi_device;
-  #define MIDI_SYSEX_BUFFER 32 
 #endif
 
 #ifdef API_ENABLE
@@ -79,6 +78,9 @@ typedef struct {
 
 #ifdef API_SYSEX_ENABLE
   #include "api_sysex.h"
+  // Allocate space for encoding overhead.
+  //The header and terminator are not stored to save a few bytes of precious ram
+  #define MIDI_SYSEX_BUFFER (API_SYSEX_MAX_SIZE + API_SYSEX_MAX_SIZE / 7 + (API_SYSEX_MAX_SIZE % 7 ? 1 : 0))
 #endif
 
 // #if LUFA_VERSION_INTEGER < 0x120730