1
0
Fork 0

[Docs] Add VBUS hack for teensys (#10986)

This commit is contained in:
Drashna Jaelre 2020-11-27 21:03:31 -08:00 committed by GitHub
parent c41c8ff780
commit 16d55b14b7
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23

View file

@ -237,6 +237,26 @@ This sets the maximum timeout when detecting master/slave when using `SPLIT_USB_
``` ```
This sets the poll frequency when detecting master/slave when using `SPLIT_USB_DETECT` This sets the poll frequency when detecting master/slave when using `SPLIT_USB_DETECT`
## Hardware Considerations and Mods
While most any Pro Micro can be used, micro controllers like the AVR Teensys and most (if not all) ARM boards require the Split USB Detect.
However, with the Teensy 2.0 and Teensy++ 2.0, there is a simple hardware mod that you can perform to add VBUS detection, so you don't need the Split USB detection option.
You'll only need a few things:
* A knife (x-acto knife, ideally)
* A solder station or hot air station
* An appropriate Schottky diode, such as the [PMEG2005EH](https://www.digikey.com/en/products/detail/nexperia-usa-inc/PMEG2005EH,115/1589924)
You'll need to cut the small trace between the 5V and center pads on the back of the Teensy.
Once you have done that, you will want to solder the diode from the 5V pad to the center pad.
You may need to use the 5V pad from the regulator block above as the pads were too small and placed too closely together to place the Schottky diode properly.
![Teensy++ 2.0](https://i.imgur.com/BPEC5n5.png)
## Additional Resources ## Additional Resources
Nicinabox has a [very nice and detailed guide](https://github.com/nicinabox/lets-split-guide) for the Let's Split keyboard, that covers most everything you need to know, including troubleshooting information. Nicinabox has a [very nice and detailed guide](https://github.com/nicinabox/lets-split-guide) for the Let's Split keyboard, that covers most everything you need to know, including troubleshooting information.