diff --git a/keyboards/mini_ten_key_plus/config.h b/keyboards/mini_ten_key_plus/config.h
new file mode 100644
index 0000000000..92ac355fe8
--- /dev/null
+++ b/keyboards/mini_ten_key_plus/config.h
@@ -0,0 +1,110 @@
+/*
+Copyright 2021 minibois
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see .
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0000
+#define DEVICE_VER 0x0001
+#define MANUFACTURER minibois
+#define PRODUCT mini_ten_key_plus
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 5
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { D4, B1, B5, B4, E6 }
+#define MATRIX_COL_PINS { F5, F4, B6, D7, C6 }
+#define ENCODERS_PAD_A { F7 }
+#define ENCODERS_PAD_B { F6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0
+
+#define ENCODER_RESOLUTION 2
diff --git a/keyboards/mini_ten_key_plus/info.json b/keyboards/mini_ten_key_plus/info.json
new file mode 100644
index 0000000000..c300a0bcff
--- /dev/null
+++ b/keyboards/mini_ten_key_plus/info.json
@@ -0,0 +1,25 @@
+{
+ "keyboard_name": "mini_ten_key_plus",
+ "url": "https://github.com/minibois/ten-key-plus",
+ "maintainer": "minibois",
+ "layouts": {
+ "LAYOUT_all": {
+ "layout":[
+ {"label":"Esc", "x":0, "y":0} ,{"label":"Calculator", "x":1, "y":0},{"label":"/", "x":2, "y":0},{"label":"*", "x":3, "y":0},{"label":"-", "x":4, "y":0},
+ {"label":"Backspace", "x":0, "y":1},{"label":"7", "x":1, "y":1} ,{"label":"8", "x":2, "y":1},{"label":"9", "x":3, "y":1},{"label":"+", "x":4, "y":1},
+ {"label":"(", "x":0, "y":2} ,{"label":"4", "x":1, "y":2} ,{"label":"5", "x":2, "y":2},{"label":"6", "x":3, "y":2},{"label":"+", "x":4, "y":2},
+ {"label":")", "x":0, "y":3} ,{"label":"1", "x":1, "y":3} ,{"label":"2", "x":2, "y":3},{"label":"3", "x":3, "y":3},{"label":"Enter", "x":4, "y":3},
+ {"label":"y", "x":0, "y":4} ,{"label":"00", "x":1, "y":4} ,{"label":"0", "x":2, "y":4},{"label":".", "x":3, "y":4},{"label":"Enter", "x":4, "y":4},
+ ]
+ },
+ "LAYOUT_standard_numpad": {
+ "layout":[
+ {"label":"Esc", "x":0, "y":0} ,{"label":"Calculator", "x":1, "y":0},{"label":"/", "x":2, "y":0},{"label":"*", "x":3, "y":0},{"label":"-", "x":4, "y":0},
+ {"label":"Backspace", "x":0, "y":1},{"label":"7", "x":1, "y":1} ,{"label":"8", "x":2, "y":1},{"label":"9", "x":3, "y":1},
+ {"label":"(", "x":0, "y":2} ,{"label":"4", "x":1, "y":2} ,{"label":"5", "x":2, "y":2},{"label":"6", "x":3, "y":2},{"label":"+", "x":4, "y":2, "h":2},
+ {"label":")", "x":0, "y":3} ,{"label":"1", "x":1, "y":3} ,{"label":"2", "x":2, "y":3},{"label":"3", "x":3, "y":3},
+ {"label":"y", "x":0, "y":4} ,{"label":"0", "x":1, "y":4 ,"w":2} ,{"label":".", "x":3, "y":4},{"label":"Enter", "x":4, "y":3, "h":2},
+ ]
+ }
+ }
+}
diff --git a/keyboards/mini_ten_key_plus/keymaps/default/keymap.c b/keyboards/mini_ten_key_plus/keymaps/default/keymap.c
new file mode 100644
index 0000000000..dee77629aa
--- /dev/null
+++ b/keyboards/mini_ten_key_plus/keymaps/default/keymap.c
@@ -0,0 +1,32 @@
+// Copyright 2021 minibois (@minibois)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+ _BASE
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Keymap _BASE: (Base Layer) Default Layer
+ * ,-------------------.
+ * |Esc|Cal| / | * | - |
+ * |--------------------
+ * | BS| 7 | 8 | 9 | + |
+ * |--------------------
+ * | ( | 4 | 5 | 6 | + |
+ * |--------------------
+ * | ) | 1 | 2 | 3 |Ent|
+ * |--------------------
+ * | Y | 00| 0 | . |Ent|
+ * `-------------------'
+ */
+ [_BASE] = LAYOUT_all(
+ KC_ESC, KC_CALC, KC_PSLS, KC_PAST, KC_PMNS,
+ KC_BSPC, KC_P7, KC_P8, KC_P9, KC_PPLS,
+ KC_LEFT_PAREN, KC_P4, KC_P5, KC_P6, KC_PPLS,
+ KC_RIGHT_PAREN, KC_P1, KC_P2, KC_P3, KC_PENT,
+ KC_Y, KC_P0, KC_P0, KC_PDOT, KC_PENT
+ )
+};
diff --git a/keyboards/mini_ten_key_plus/keymaps/default/readme.md b/keyboards/mini_ten_key_plus/keymaps/default/readme.md
new file mode 100644
index 0000000000..a8f697f2cb
--- /dev/null
+++ b/keyboards/mini_ten_key_plus/keymaps/default/readme.md
@@ -0,0 +1,2 @@
+# The default 1u keymap for mini_ten_key_plus
+
\ No newline at end of file
diff --git a/keyboards/mini_ten_key_plus/keymaps/standard_numpad/keymap.c b/keyboards/mini_ten_key_plus/keymaps/standard_numpad/keymap.c
new file mode 100644
index 0000000000..cc3fa03da1
--- /dev/null
+++ b/keyboards/mini_ten_key_plus/keymaps/standard_numpad/keymap.c
@@ -0,0 +1,32 @@
+// Copyright 2021 minibois (@minibois)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+ _BASE
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Keymap _BASE: (Base Layer) Default Layer
+ * ,-------------------.
+ * |Esc|Cal| / | * | - |
+ * |--------------------
+ * | BS| 7 | 8 | 9 | + |
+ * |---------------- |
+ * | ( | 4 | 5 | 6 | |
+ * |--------------------
+ * | ) | 1 | 2 | 3 |Ent|
+ * |---------------- |
+ * | Y | 0 | . | |
+ * `-------------------'
+ */
+ [_BASE] = LAYOUT_standard_numpad(
+ KC_ESC, KC_CALC, KC_PSLS, KC_PAST, KC_PMNS,
+ KC_BSPC, KC_P7, KC_P8, KC_P9,
+ KC_LEFT_PAREN, KC_P4, KC_P5, KC_P6, KC_PPLS,
+ KC_RIGHT_PAREN, KC_P1, KC_P2, KC_P3,
+ KC_Y, KC_P0, KC_PDOT, KC_PENT
+ )
+};
diff --git a/keyboards/mini_ten_key_plus/keymaps/standard_numpad/readme.md b/keyboards/mini_ten_key_plus/keymaps/standard_numpad/readme.md
new file mode 100644
index 0000000000..2cb470bef8
--- /dev/null
+++ b/keyboards/mini_ten_key_plus/keymaps/standard_numpad/readme.md
@@ -0,0 +1,2 @@
+# The standard numpad keymap for mini_ten_key_plus
+
\ No newline at end of file
diff --git a/keyboards/mini_ten_key_plus/mini_ten_key_plus.c b/keyboards/mini_ten_key_plus/mini_ten_key_plus.c
new file mode 100644
index 0000000000..b2b7456b53
--- /dev/null
+++ b/keyboards/mini_ten_key_plus/mini_ten_key_plus.c
@@ -0,0 +1,15 @@
+// Copyright 2021 minibois (@minibois)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "mini_ten_key_plus.h"
+
+/* Rotary Encoder's function (currently volume up/down) */
+bool encoder_update_kb(uint8_t index, bool clockwise) {
+ if (!encoder_update_user(index, clockwise)) { return false; }
+ if (clockwise) {
+ tap_code16(KC_RIGHT_PAREN);
+ } else {
+ tap_code16(KC_LEFT_PAREN);
+ }
+ return true;
+}
\ No newline at end of file
diff --git a/keyboards/mini_ten_key_plus/mini_ten_key_plus.h b/keyboards/mini_ten_key_plus/mini_ten_key_plus.h
new file mode 100644
index 0000000000..fef3b6a8c3
--- /dev/null
+++ b/keyboards/mini_ten_key_plus/mini_ten_key_plus.h
@@ -0,0 +1,78 @@
+/* Copyright 2021 minibois
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+// readability
+#define ___ KC_NO
+
+/* Default
+ * ,-------------------.
+ * |00 |01 |02 |03 |04 |
+ * |-------------------|
+ * |10 |11 |12 |13 |14 |
+ * |-------------------|
+ * |20 |21 |22 |23 |24 |
+ * |-------------------|
+ * |30 |31 |32 |33 |34 |
+ * |-------------------|
+ * |40 |41 |42 |43 |44 |
+ * `-------------------'
+*/
+#define LAYOUT_all( \
+ k00, k01, k02, k03, k04 , \
+ k10, k11, k12, k13, k14 , \
+ k20, k21, k22, k23, k24 , \
+ k30, k31, k32, k33, k34 , \
+ k40, k41, k42, k43, k44 \
+) \
+{ \
+ { k00, k01, k02, k03, k04, }, \
+ { k10, k11, k12, k13, k14, }, \
+ { k20, k21, k22, k23, k24, }, \
+ { k30, k31, k32, k33, k34, }, \
+ { k40, k41, k42, k43, k44, } \
+}
+
+/* Standard Numpad
+ * ,-------------------.
+ * |00 |01 |02 |03 |04 |
+ * |-------------------|
+ * |10 |11 |12 |13 | |
+ * |---------------|14 |
+ * |20 |21 |22 |23 | |
+ * |-------------------|
+ * |30 |31 |32 |33 | |
+ * |---------------|34 |
+ * |40 | 41 |43 | |
+ * `-------------------'
+*/
+#define LAYOUT_standard_numpad( \
+ k00, k01, k02, k03, k04 , \
+ k10, k11, k12, k13, \
+ k20, k21, k22, k23, k24 , \
+ k30, k31, k32, k33, \
+ k40, k42, k43, k44 \
+) \
+{ \
+ { k00, k01, k02, k03, k04, }, \
+ { k10, k11, k12, k13, ___, }, \
+ { k20, k21, k22, k23, k24, }, \
+ { k30, k31, k32, k33, ___, }, \
+ { k40, ___, k42, k43, k44, } \
+}
diff --git a/keyboards/mini_ten_key_plus/readme.md b/keyboards/mini_ten_key_plus/readme.md
new file mode 100644
index 0000000000..12afcc4f12
--- /dev/null
+++ b/keyboards/mini_ten_key_plus/readme.md
@@ -0,0 +1,24 @@
+# mini_ten_key_plus
+
+
+
+A 5x5 numpad/macropad, with support for a rotary encoder running on a Pro Micro.
+
+* Keyboard Maintainer: [minibois](https://github.com/minibois)
+* Hardware Supported: mini_ten_key_plus PCB, Pro Micro (or equivalent), 3D printed case, 22 - 25 MX (like) switches, PCB mount stabilizers
+* Hardware Availability: https://github.com/minibois/ten-key-plus
+
+Make example for this keyboard (after setting up your build environment):
+
+ make mini_ten_key_plus:default
+
+Flashing example for this keyboard:
+
+ make mini_ten_key_plus:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader:
+* **Physical reset button**: Briefly press the button on the back of the PCB
diff --git a/keyboards/mini_ten_key_plus/rules.mk b/keyboards/mini_ten_key_plus/rules.mk
new file mode 100644
index 0000000000..77d9fdb410
--- /dev/null
+++ b/keyboards/mini_ten_key_plus/rules.mk
@@ -0,0 +1,19 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no # Console for debug
+COMMAND_ENABLE = no # Commands for debug and configuration
+NKRO_ENABLE = no # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+AUDIO_ENABLE = no # Audio output
+ENCODER_ENABLE = yes