1
0
Fork 0

Merge pull request #1088 from Mauin/gon_nerd

add GON NerD
This commit is contained in:
Jack Humbert 2017-02-11 11:48:11 -05:00 committed by GitHub
commit 199458378b
12 changed files with 331 additions and 0 deletions

View file

@ -0,0 +1,3 @@
ifndef MAKEFILE_INCLUDED
include ../../Makefile
endif

View file

@ -0,0 +1,43 @@
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER GON
#define PRODUCT NerD
#define DESCRIPTION QMK port for the GON Nerd PCB
/* key matrix size */
#define MATRIX_ROWS 10
#define MATRIX_COLS 9
/* backlight */
#define BACKLIGHT_PIN B7
#define BACKLIGHT_LEVELS 3
/* matrix pins */
#define MATRIX_ROW_PINS { B4, E2, F4, F7, F1, F6, C6, F5, D7, C7 }
#define MATRIX_COL_PINS { E6, B0, B1, B2, B3, F0, D0, D5, D1 }
#define UNUSED_PINS
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* key combination for magic key command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
#endif

View file

@ -0,0 +1 @@
#include "gonnerd.h"

View file

@ -0,0 +1,42 @@
#ifndef GONNERD_H
#define GONNERD_H
#include "quantum.h"
#define KEYMAP_TKL( \
K08, K09, K18, K19, K28, K29, K38, K39, K48, K49, K58, K59, K68, K69, K88, K89, \
K00, K01, K10, K11, K20, K21, K30, K31, K40, K41, K50, K51, K60, K61, K80, K81, K84, \
K02, K03, K12, K13, K22, K23, K32, K33, K42, K43, K52, K53, K62, K63, K82, K83, K85, \
K04, K14, K15, K24, K25, K34, K35, K44, K45, K54, K55, K64, K71, K65, \
K07, K79, K16, K17, K26, K27, K36, K37, K46, K47, K56, K57, K66, K67, K86, \
K06, K05, K78, K70, K72, K73, K74, K75, K76, K77, K87 \
) \
{ \
{ K00, K10, K20, K30, K40, K50, K60, K70, K80 }, \
{ K01, K11, K21, K31, K41, K51, K61, K71, K81 }, \
{ K02, K12, K22, K32, K42, K52, K62, K72, K82 }, \
{ K03, K13, K23, K33, K43, K53, K63, K73, K83 }, \
{ K04, K14, K24, K34, K44, K54, K64, K74, K84 }, \
{ K05, K15, K25, K35, K45, K55, K65, K75, K85 }, \
{ K06, K16, K26, K36, K46, K56, K66, K76, K86 }, \
{ K07, K17, K27, K37, K47, K57, K67, K77, K87 }, \
{ K08, K18, K28, K38, K48, K58, K68, K78, K88 }, \
{ K09, K19, K29, K39, K49, K59, K69, K79, K89 } \
}
#define KEYMAP_60( \
K08, K01, K10, K11, K20, K21, K30, K31, K40, K41, K50, K51, K60, K61, \
K02, K03, K12, K13, K22, K23, K32, K33, K42, K43, K52, K53, K62, K63, \
K04, K14, K15, K24, K25, K34, K35, K44, K45, K54, K55, K64, K71, K65, \
K07, K79, K16, K17, K26, K27, K36, K37, K46, K47, K56, K57, K66, K67, \
K06, K05, K78, K70, K72, K73, K74, K75 \
) KEYMAP_TKL( \
K08, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
KC_NO, K01, K10, K11, K20, K21, K30, K31, K40, K41, K50, K51, K60, K61, KC_NO, KC_NO, KC_NO, \
K02, K03, K12, K13, K22, K23, K32, K33, K42, K43, K52, K53, K62, K63, KC_NO, KC_NO, KC_NO, \
K04, K14, K15, K24, K25, K34, K35, K44, K45, K54, K55, K64, K71, K65, \
K07, K79, K16, K17, K26, K27, K36, K37, K46, K47, K56, K57, K66, K67, KC_NO, \
K06, K05, K78, K70, K72, K73, K74, K75, KC_NO, KC_NO, KC_NO \
)
#endif

View file

@ -0,0 +1,21 @@
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

View file

@ -0,0 +1,16 @@
#include "gonnerd.h"
// Keymap layers
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = KEYMAP_60( /* Base */
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSPC,\
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS,\
KC_LCTL,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_NO, KC_ENT, \
KC_LSFT,KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RSFT,KC_NO, \
KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,MO(1), KC_RCTL),
};
const uint16_t PROGMEM fn_actions[] = {
};

View file

@ -0,0 +1,21 @@
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

View file

@ -0,0 +1,78 @@
#include "gonnerd.h"
// Keymap layers
#define BASE_LAYER 0
#define FUNCTION_LAYER 1
#define SYSTEM_LAYER 2
// Key aliases
#define __x__ KC_NO
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Layer 0: Default Layer
* ,-----------------------------------------------------------.
* |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| = | BSp |
* |-----------------------------------------------------------|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
* |-----------------------------------------------------------|
* |Funct | A| S| D| F| G| H| J| K| L| ;| '|Enter |
* |-----------------------------------------------------------|
* |Shift | Z| X| C| V| B| N| M| ,| .| /| Shift |
* |-----------------------------------------------------------'
* | Ctl|Alt|Gui | Space |Gui |Alt| F2| Ctl |
* `-----------------------------------------------------------'
*/
[BASE_LAYER] = KEYMAP_60(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, __x__, KC_ENT, \
KC_LSFT, __x__, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, __x__, \
KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, MO(3), KC_RCTL \
),
/* Layer 1: Function Layer
* ,-----------------------------------------------------------.
* | | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11| F12| Del |
* |-----------------------------------------------------------|
* | |Prv|Ply|Nxt| | |Pg^|Hme|Up |End| |Br-|Br+| |
* |-----------------------------------------------------------|
* |Hold |Mte|Vl-|Vl+| | |Pgv|Lft|Dwn|Rgt| | | |
* |-----------------------------------------------------------|
* | | | | | | | | | | | | |
* |-----------------------------------------------------------'
* | | | | | | | | |
* `-----------------------------------------------------------'
*/
[FUNCTION_LAYER] = KEYMAP_60(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \
__x__, KC_MPRV, KC_MPLY, KC_MNXT, __x__, __x__, KC_PGUP, KC_HOME, KC_UP, KC_END, __x__, KC_SLCK, KC_PAUS, __x__, \
KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, __x__, __x__, KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, __x__, __x__, __x__, __x__, \
KC_LSFT, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \
KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, __x__, __x__, __x__, __x__ \
),
/* Layer 2: System Layer
* ,-----------------------------------------------------------.
* |Reset| | | | | | | | | | | | | |
* |-----------------------------------------------------------|
* | | | | | | | | | | | | | | |
* |-----------------------------------------------------------|
* | | | | | | | | | | | | | |
* |-----------------------------------------------------------|
* | | | | | | | | | | | | |
* |-----------------------------------------------------------'
* | | | | | | | | |
* `-----------------------------------------------------------'
*/
[SYSTEM_LAYER] = KEYMAP_60(
RESET, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \
__x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \
__x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \
__x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \
__x__, __x__, __x__, __x__, __x__, __x__, KC_TRNS, __x__ \
),
};
const uint16_t PROGMEM fn_actions[] = {
};

View file

@ -0,0 +1,5 @@
# Mauin's keymap for the GON NerD
This layout is based on a Pok3r style layout with a standard base layer.
Function layers provide access to navigation and media keys.

View file

@ -0,0 +1,34 @@
GON NerD keyboard firmware
======================
## Changing Bootloader
It's not possible to simply flash this firmware on the GON NerD keyboard as the original bootloader does not support DFU connections.
It is possible to change the bootloader of the GON NerD with an ISP programmer. A guide on how to change the bootloader on your GON NerD can be found here:
[Converting NerD60 to TMK](https://deskthority.net/wiki/Converting_NerD60_to_TMK). After changing the bootloader you can flash your QMK keymap onto the keyboard.
_After changing the bootloader on your GON NerD PCB you will not be able to go back to the original firmware and the official configuration software will
not work anymore. You will lose your warranty and official support from GON!_
## Building
Download or clone the whole firmware and navigate to the keyboards/gonnerd folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
Depending on which keymap you would like to use, you will have to compile slightly differently.
### Default
To build with the default keymap, simply run `make default`.
### Other Keymaps
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
```
$ make [default|jack|<name>]
```
Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.

View file

@ -0,0 +1,66 @@
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 8000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
CONSOLE_ENABLE ?= no # Console for debug(+400)
COMMAND_ENABLE ?= yes # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE ?= no # USB Nkey Rollover
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality on B7 by default
MIDI_ENABLE ?= no # MIDI controls
UNICODE_ENABLE ?= no # Unicode
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE ?= no # Audio output on port C6

View file

@ -39,6 +39,7 @@ These keyboards are part of the QMK repository, but their manufacturers are not
* [Bantam44](/keyboards/bantam44) &mdash; It is a 44-key 40% staggered keyboard.
* [Ergodox Infinity](/keyboards/ergodox) - Ergonomic Split Keyboard by Input Club.
* [GH60](/keyboards/gh60) &mdash; A 60% Geekhack community-driven project.
* [GON NerD](/keyboards/gonnerd) &mdash; Korean custom 60% PCB
* [Happy Hacking Keyboard](/keyboards/hhkb) &mdash; The Happy Hacking keyboard can be hacked with a custom controller to run QMK.
* [Infinity 60%](/keyboards/infinity60) - &mdash; Compact community keyboard by Input Club.
* [JD45](/keyboards/jd45) &mdash; Another Geekhack community project, designed by jdcarpe.