diff --git a/.travis.yml b/.travis.yml
index 2e0714d713..436c17338a 100644
--- a/.travis.yml
+++ b/.travis.yml
@@ -21,9 +21,11 @@ env:
   - KEYBOARD=hhkb
   - KEYBOARD=jd45
   - KEYBOARD=kc60
+  - KEYBOARD=phantom
   - KEYBOARD=planck
   - KEYBOARD=preonic
   - KEYBOARD=retro_refit
+  - KEYBOARD=satan
   - KEYBOARD=sixkeyboard
 
 script:
diff --git a/keyboard/satan/Makefile b/keyboard/satan/Makefile
new file mode 100644
index 0000000000..9df0e4fd07
--- /dev/null
+++ b/keyboard/satan/Makefile
@@ -0,0 +1,115 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+SRC = led.c
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes	# Console for debug(+400)
+COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE ?= yes   # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE ?= no 		# MIDI controls
+AUDIO_ENABLE ?= no
+UNICODE_ENABLE ?= no 		# Unicode
+BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
+
+#ifdef BACKLIGHT_ENABLE
+    SRC := backlight.c $(SRC)
+#endif
+
+ifndef QUANTUM_DIR
+	include ../../Makefile
+endif
diff --git a/keyboard/satan/backlight.c b/keyboard/satan/backlight.c
new file mode 100644
index 0000000000..4240b09164
--- /dev/null
+++ b/keyboard/satan/backlight.c
@@ -0,0 +1,24 @@
+
+#include <avr/io.h>
+#include "backlight.h"
+#include "print.h"
+
+void init_backlight_pin(void) {
+    print("init_backlight_pin()\n");
+    // Set our LED pins as output
+    DDRB |= (1<<6);
+
+    // Set our LED pins low
+    PORTB &= ~(1<<6);
+}
+
+void backlight_set(uint8_t level) {
+    if ( level == 0 ) {
+        // Turn off light
+        PORTB |= (1<<6);
+    } else {
+        // Turn on light
+        PORTB &= ~(1<<6);
+    }
+}
+
diff --git a/keyboard/satan/config.h b/keyboard/satan/config.h
new file mode 100644
index 0000000000..aea9254e8d
--- /dev/null
+++ b/keyboard/satan/config.h
@@ -0,0 +1,92 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0003
+#define MANUFACTURER    SATAN
+#define PRODUCT         GH60
+#define DESCRIPTION     QMK keyboard firmware for Satan GH60 with WS2812 support
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+// ROWS: Top to bottom, COLS: Left to right
+
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Backlight configuration
+ */
+#define BACKLIGHT_LEVELS 1
+
+/* Underlight configuration
+ */
+ #define ws2812_PORTREG PORTE
+ #define ws2812_DDRREG DDRE
+ #define ws2812_pin 2
+ #define RGBLED_NUM 8     // Number of LEDs
+ #define RGBLIGHT_HUE_STEP 10
+ #define RGBLIGHT_SAT_STEP 17
+ #define RGBLIGHT_VAL_STEP 17
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboard/satan/controller.jpg b/keyboard/satan/controller.jpg
new file mode 100644
index 0000000000..76ffa45004
Binary files /dev/null and b/keyboard/satan/controller.jpg differ
diff --git a/keyboard/satan/keymaps/default/compiled.hex b/keyboard/satan/keymaps/default/compiled.hex
new file mode 100644
index 0000000000..8f4957d1c7
Binary files /dev/null and b/keyboard/satan/keymaps/default/compiled.hex differ
diff --git a/keyboard/satan/keymaps/default/keymap.c b/keyboard/satan/keymaps/default/keymap.c
new file mode 100644
index 0000000000..b19404afc7
--- /dev/null
+++ b/keyboard/satan/keymaps/default/keymap.c
@@ -0,0 +1,162 @@
+#include "satan.h"
+
+#ifdef RGBLIGHT_ENABLE
+#include "rgblight.h"
+#endif
+
+// Used for SHIFT_ESC
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap _BL: (Base Layer) Default Layer
+   * ,-----------------------------------------------------------.
+   * |Esc~| 1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
+   * |-----------------------------------------------------------|
+   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  |
+   * |-----------------------------------------------------------|
+   * |CAPS   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return |
+   * |-----------------------------------------------------------|
+   * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     |
+   * |-----------------------------------------------------------|
+   * |Ctrl|Gui |Alt |      Space            |Alt |Gui |FN  |Ctrl |
+   * `-----------------------------------------------------------'
+   */
+[_BL] = KEYMAP(
+  F(0),    KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,  KC_EQL,   KC_BSPC, \
+  KC_TAB,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,  KC_RBRC,  KC_BSLS, \
+  KC_CAPS,   KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,            KC_ENT,  \
+  KC_LSFT,         KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,            KC_RSFT, \
+  KC_LCTL, KC_LGUI,KC_LALT,          KC_SPC,                                        KC_RALT,  KC_RGUI, MO(_FL),  KC_RCTL),
+
+  /* Keymap _FL: Function Layer
+   * ,-----------------------------------------------------------.
+   * |   |   |   |   |   |   |   |   |   |   |   |   |   |  RESET|
+   * |-----------------------------------------------------------|
+   * |     |   |   |   |   |   |   |   |   |   |   |BL-|BL+|BL   |
+   * |-----------------------------------------------------------|
+   * |      |   |   |   |   |   |   |       |   |   |   |        |
+   * |-----------------------------------------------------------|
+   * |        | F1|F2 | F3|F4 | F5| F6| F7| F8|   |   |          |
+   * |-----------------------------------------------------------|
+   * |    |    |    |                        |    |    |    |    |
+   * `-----------------------------------------------------------'
+   */
+[_FL] = KEYMAP(
+  #ifdef RGBLIGHT_ENABLE
+  KC_GRV, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,  \
+  KC_TRNS,KC_TRNS,KC_TRNS,  KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,   KC_TRNS,   BL_DEC,   BL_INC,   BL_TOGG, \
+  KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS,              KC_TRNS, \
+  KC_TRNS, F(1), F(2), F(3), F(4), F(5), F(6), F(7), F(8), KC_TRNS, KC_TRNS, KC_TRNS, \
+  KC_TRNS,KC_TRNS,KC_TRNS,          KC_TRNS,                               KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+  #else
+  KC_GRV, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,  \
+  KC_TRNS,KC_TRNS,KC_TRNS,  KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,   KC_TRNS,   BL_DEC,   BL_INC,   BL_TOGG, \
+  KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS,              KC_TRNS, \
+  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+  KC_TRNS,KC_TRNS,KC_TRNS,          KC_TRNS,                               KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+  #endif
+};
+
+enum function_id {
+    SHIFT_ESC,
+    #ifdef RGBLIGHT_ENABLE
+    RGBLED_TOGGLE,
+    RGBLED_STEP_MODE,
+    RGBLED_INCREASE_HUE,
+    RGBLED_DECREASE_HUE,
+    RGBLED_INCREASE_SAT,
+    RGBLED_DECREASE_SAT,
+    RGBLED_INCREASE_VAL,
+    RGBLED_DECREASE_VAL
+    #endif
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0]  = ACTION_FUNCTION(SHIFT_ESC),
+  #ifdef RGBLIGHT_ENABLE
+  [1]  = ACTION_FUNCTION(RGBLED_TOGGLE),
+  [2]  = ACTION_FUNCTION(RGBLED_STEP_MODE),
+  [3]  = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
+  [4]  = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
+  [5]  = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
+  [6]  = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
+  [7]  = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
+  [8]  = ACTION_FUNCTION(RGBLED_DECREASE_VAL),
+  #endif
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  static uint8_t shift_esc_shift_mask;
+  switch (id) {
+    case SHIFT_ESC:
+      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
+      if (record->event.pressed) {
+        if (shift_esc_shift_mask) {
+          add_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          add_key(KC_ESC);
+          send_keyboard_report();
+        }
+      } else {
+        if (shift_esc_shift_mask) {
+          del_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          del_key(KC_ESC);
+          send_keyboard_report();
+        }
+      }
+      break;
+    //led operations
+    #ifdef RGBLIGHT_ENABLE
+    case RGBLED_TOGGLE:
+      if (record->event.pressed) {
+        rgblight_toggle();
+      }
+      break;
+    case RGBLED_INCREASE_HUE:
+      if (record->event.pressed) {
+        rgblight_increase_hue();
+      }
+      break;
+    case RGBLED_DECREASE_HUE:
+      if (record->event.pressed) {
+        rgblight_decrease_hue();
+      }
+      break;
+    case RGBLED_INCREASE_SAT:
+      if (record->event.pressed) {
+        rgblight_increase_sat();
+      }
+      break;
+    case RGBLED_DECREASE_SAT:
+      if (record->event.pressed) {
+        rgblight_decrease_sat();
+      }
+      break;
+    case RGBLED_INCREASE_VAL:
+      if (record->event.pressed) {
+        rgblight_increase_val();
+      }
+      break;
+    case RGBLED_DECREASE_VAL:
+      if (record->event.pressed) {
+        rgblight_decrease_val();
+      }
+      break;
+    case RGBLED_STEP_MODE:
+      if (record->event.pressed) {
+        rgblight_step();
+      }
+      break;
+    #endif
+  }
+}
diff --git a/keyboard/satan/led.c b/keyboard/satan/led.c
new file mode 100644
index 0000000000..5a9f2af672
--- /dev/null
+++ b/keyboard/satan/led.c
@@ -0,0 +1,36 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/io.h>
+#include "stdint.h"
+#include "led.h"
+
+
+void led_init_ports() {
+    // * Set our LED pins as output
+    DDRB |= (1<<2);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // Turn capslock on
+        PORTB |= (1<<2);
+    } else {
+        // Turn capslock off
+        PORTB &= ~(1<<2);
+    }
+}
diff --git a/keyboard/satan/pinout.txt b/keyboard/satan/pinout.txt
new file mode 100644
index 0000000000..d1ad4ac883
--- /dev/null
+++ b/keyboard/satan/pinout.txt
@@ -0,0 +1 @@
+For WS2812B LED strip support, connect DIN from strip to PE2 on ATmega32u4 controller (see reference image controller.jpg)
\ No newline at end of file
diff --git a/keyboard/satan/power.jpg b/keyboard/satan/power.jpg
new file mode 100644
index 0000000000..0514eef5c7
Binary files /dev/null and b/keyboard/satan/power.jpg differ
diff --git a/keyboard/satan/satan.c b/keyboard/satan/satan.c
new file mode 100644
index 0000000000..40bd9dcde4
--- /dev/null
+++ b/keyboard/satan/satan.c
@@ -0,0 +1,36 @@
+#include "satan.h"
+
+#ifdef BACKLIGHT_ENABLE
+#include "backlight.h"
+#endif
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+	// leave these blank
+};
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+	// leave these blank
+};
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	if (matrix_init_user) {
+		(*matrix_init_user)();
+	}
+	led_init_ports();
+
+    #ifdef BACKLIGHT_ENABLE
+        init_backlight_pin();
+    #endif
+};
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+	if (matrix_scan_user) {
+		(*matrix_scan_user)();
+	}
+};
diff --git a/keyboard/satan/satan.h b/keyboard/satan/satan.h
new file mode 100644
index 0000000000..5a2bc46ced
--- /dev/null
+++ b/keyboard/satan/satan.h
@@ -0,0 +1,42 @@
+#ifndef SATAN_H
+#define SATAN_H
+
+#include "matrix.h"
+#include "keymap_common.h"
+#include <stddef.h>
+
+
+/* Clueboard matrix layout
+   * ,-----------------------------------------------------------.
+   * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d    |
+   * |-----------------------------------------------------------|
+   * | 10  | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c|  1d |
+   * |-----------------------------------------------------------|
+   * | 20    | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d    |
+   * |-----------------------------------------------------------|
+   * | 30     | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b|  3d      |
+   * |-----------------------------------------------------------|
+   * | 40 | 41 | 42 |        45             | 4a | 4b | 4c | 4d  |
+   * `-----------------------------------------------------------'
+ */
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define KEYMAP( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
+	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,      k2d, \
+	k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,           k3d, \
+	k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
+) \
+{ \
+		{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+		{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
+		{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, KC_NO, k2d}, \
+		{k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, KC_NO, k3d}, \
+		{k40, k41, k42, KC_NO, KC_NO, k45, KC_NO, KC_NO, KC_NO, KC_NO, k4a, k4b, k4c, k4d}  \
+}
+
+void matrix_init_user(void);
+void matrix_scan_user(void);
+
+#endif