1
0
Fork 0

adb_usb: Change README

This commit is contained in:
tmk 2015-05-13 17:19:25 +09:00
parent a8822a16b4
commit 1ed54a5dc9

View file

@ -7,70 +7,69 @@ But binary size is about 10KB or more it doesn't fit into 8K flash like ATMega8U
Discuss: http://geekhack.org/showwiki.php?title=Island:14290 Discuss: http://geekhack.org/showwiki.php?title=Island:14290
README FIRST
------------
https://github.com/tmk/tmk_keyboard
https://github.com/tmk/tmk_keyboard/tree/master/converter/adb_usb
Also check these when you are in trouble.
https://github.com/tmk/tmk_keyboard/wiki
https://github.com/tmk/tmk_keyboard/labels/NOTE
Wiring Wiring
------ ------
0. Connect ADB keyboard to Teensy by 3 lines(Vcc, GND, Data). By default Data line uses port PD0. Connect ADB pins to controller just by 3 lines(Vcc, GND, Data). By default Data line uses port PD0.
This converter uses AVR's internal pull-up, but it seems to be too weak, in particular when you want to use a long or coiled cable.
The external pull-up resistor(1K-10K Ohm) on Data is strongly recommended. ADB female socket from the front:
1. Define following macros for ADB connection in config.h if you use other than port PD0.
,--_--.
/ o4 3o \ 1: DATA
| o2 1o | 2: Power SW
- === - 3: VCC
`-___-' 4: GND
This converter uses AVR's internal pull-up, but it seems to be too weak, in particular when you want to use a long or coiled cable. The external pull-up resistor(1K-10K Ohm) on Data is strongly recommended.(It is almost must!)
https://github.com/tmk/tmk_keyboard/wiki/FAQ#pull-up-resistor
Pull-up resister:
Keyboard Conveter
,------.
5V------+------|VCC |
| | |
[R] | |
| | |
Signal--+------|PD0 |
| |
GND------------|GND |
`------'
R: 1K Ohm resistor
Define following macros for ADB connection in config.h if you use other than port PD0.
ADB_PORT, ADB_PIN, ADB_DDR, ADB_DATA_BIT ADB_PORT, ADB_PIN, ADB_DDR, ADB_DATA_BIT
2. make
3. program Teensy
Build Build
----- -----
Just make See doc/build.md. In short,
$ make clean $ make clean
$ make $ make
If your keyboard is ISO layout You can select keymap(ansi is default) like this:
$ make KEYMAP=iso $ make KEYMAP=[ansi|iso|hasu]
LOCKING CAPSLOCK
----------------
Many of old ADB keyboards have mechanical push-lock switch for Capslock key and this converter supports the locking Capslock key by default. See README in top directory for more detail about this feature.
Also you may want to remove locking pin from the push-lock switch to use capslock as a normal momentary switch.
http://www.youtube.com/watch?v=9wqnt2mGJ2Y
Keymap Keymap
------ ------
You can change a keymap by editing code of keymap.c like following. You can change a keymap by editing code of keymap_[ansi|iso|hasu|yours].c.
This is a keymap for AEK, however, also used for other keyboards. How to define the keymap is probably obvious. You can find key symbols in common/keycode.h. And see doc/keymap.md for more detail.
How to define the keymap is probably obvious. You can find key symbols in keycode.h.
If you want to define some keymaps than just one, see hhkb/keymap.c and
macway/keymap.c as examples. Keymap(layer) switching may needs a bit of
effort at this time.
/* Default Layer: plain keymap
* ,---. ,---------------. ,---------------. ,---------------. ,-----------. ,---.
* |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |Pwr|
* `---' `---------------' `---------------' `---------------' `-----------' `---'
* ,-----------------------------------------------------------. ,-----------. ,---------------.
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| |Ins|Hom|PgU| |NmL| =| /| *|
* |-----------------------------------------------------------| |-----------| |---------------|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| -|
* |-----------------------------------------------------------| `-----------' |---------------|
* |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return | | 4| 5| 6| +|
* |-----------------------------------------------------------| ,---. |---------------|
* |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| |
* |-----------------------------------------------------------| ,-----------. |-----------|Ent|
* |Ctrl |Alt |Gui | Space |Gui |Alt |Ctrl | |Lef|Dow|Rig| | 0| .| |
* `-----------------------------------------------------------' `-----------' `---------------'
*/
KEYMAP(
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, PWR,
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,EQL, PSLS,PAST,
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9, PMNS,
LCAP,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS,
LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3,
LCTL,LGUI,LALT, SPC, LEFT,DOWN,RGHT, P0, PDOT,PENT
),
Magic command Magic command
@ -78,6 +77,14 @@ Magic command
To get help press `h` holding Magic key. Magic key is `Power key`. To get help press `h` holding Magic key. Magic key is `Power key`.
Locking CapsLock
----------------
Many of old ADB keyboards have mechanical push-lock switch for Capslock key and this converter supports the locking Capslock key by default. See README in top directory for more detail about this feature.
https://github.com/tmk/tmk_keyboard/blob/master/README.md#mechanical-locking-support
Also you may want to remove locking pin from the push-lock switch to use capslock as a normal momentary switch.
Notes Notes
----- -----
Not-extended ADB keyboards have no discrimination between right modifier and left one, Not-extended ADB keyboards have no discrimination between right modifier and left one,