diff --git a/keyboards/k_type/i2c_master.c b/keyboards/k_type/i2c_master.c
new file mode 100644
index 0000000000..62d732c2d0
--- /dev/null
+++ b/keyboards/k_type/i2c_master.c
@@ -0,0 +1,150 @@
+/* Copyright 2018 Jack Humbert
+ * Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+/* This library is only valid for STM32 processors.
+ * This library follows the convention of the AVR i2c_master library.
+ * As a result addresses are expected to be already shifted (addr << 1).
+ * I2CD1 is the default driver which corresponds to pins B6 and B7. This
+ * can be changed.
+ * Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that
+ * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file. Pins B6 and B7 are used
+ * but using any other I2C pins should be trivial.
+ */
+
+#ifdef RGB_MATRIX_ENABLE
+
+
+#include "quantum.h"
+#include "i2c_master.h"
+#include
+#include
+
+static uint8_t i2c_address;
+
+I2CDriver *drivers[I2C_COUNT];
+
+static const I2CConfig i2cconfig = {
+#if defined(USE_I2CV1_CONTRIB)
+ I2C1_CLOCK_SPEED,
+#elif defined(USE_I2CV1)
+ I2C1_OPMODE,
+ I2C1_CLOCK_SPEED,
+ I2C1_DUTY_CYCLE,
+#else
+ // This configures the I2C clock to 400khz assuming a 72Mhz clock
+ // For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
+ STM32_TIMINGR_PRESC(I2C1_TIMINGR_PRESC) | STM32_TIMINGR_SCLDEL(I2C1_TIMINGR_SCLDEL) | STM32_TIMINGR_SDADEL(I2C1_TIMINGR_SDADEL) | STM32_TIMINGR_SCLH(I2C1_TIMINGR_SCLH) | STM32_TIMINGR_SCLL(I2C1_TIMINGR_SCLL), 0, 0
+#endif
+};
+
+static i2c_status_t chibios_to_qmk(const msg_t* status) {
+ switch (*status) {
+ case I2C_NO_ERROR:
+ return I2C_STATUS_SUCCESS;
+ case I2C_TIMEOUT:
+ return I2C_STATUS_TIMEOUT;
+ // I2C_BUS_ERROR, I2C_ARBITRATION_LOST, I2C_ACK_FAILURE, I2C_OVERRUN, I2C_PEC_ERROR, I2C_SMB_ALERT
+ default:
+ return I2C_STATUS_ERROR;
+ }
+}
+
+__attribute__((weak)) void i2c_init(I2CDriver *driver, ioportid_t scl_port, ioportid_t sda_port, iopadid_t scl_pad, iopadid_t sda_pad) {
+ static uint8_t index = 0;
+ if (index < I2C_COUNT) {
+
+ // Try releasing special pins for a short time
+ palSetPadMode(scl_port, scl_pad, PAL_MODE_INPUT);
+ palSetPadMode(sda_port, sda_pad, PAL_MODE_INPUT);
+
+ chThdSleepMilliseconds(10);
+
+#if defined(USE_GPIOV1)
+ palSetPadMode(scl_port, scl_pad, I2C1_SCL_PAL_MODE);
+ palSetPadMode(sda_port, sda_pad, I2C1_SDA_PAL_MODE);
+#else
+ palSetPadMode(scl_port, scl_pad, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
+ palSetPadMode(sda_port, sda_pad, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
+#endif
+
+ drivers[index++] = driver;
+ }
+}
+
+i2c_status_t i2c_start(uint8_t index, uint8_t address) {
+ if(index >= I2C_COUNT) {
+ return I2C_STATUS_ERROR;
+ }
+ i2c_address = address;
+ i2cStart(drivers[index], &i2cconfig);
+ return I2C_STATUS_SUCCESS;
+}
+
+i2c_status_t i2c_transmit(uint8_t index, uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout) {
+ if(index >= I2C_COUNT) {
+ return I2C_STATUS_ERROR;
+ }
+ i2c_address = address;
+ i2cStart(drivers[index], &i2cconfig);
+ msg_t status = i2cMasterTransmitTimeout(drivers[index], (i2c_address >> 1), data, length, 0, 0, TIME_MS2I(timeout));
+ return chibios_to_qmk(&status);
+}
+
+i2c_status_t i2c_receive(uint8_t index, uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) {
+ if(index >= I2C_COUNT) {
+ return I2C_STATUS_ERROR;
+ }
+ i2c_address = address;
+ i2cStart(drivers[index], &i2cconfig);
+ msg_t status = i2cMasterReceiveTimeout(drivers[index], (i2c_address >> 1), data, length, TIME_MS2I(timeout));
+ return chibios_to_qmk(&status);
+}
+
+i2c_status_t i2c_writeReg(uint8_t index, uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout) {
+ if(index >= I2C_COUNT) {
+ return I2C_STATUS_ERROR;
+ }
+ i2c_address = devaddr;
+ i2cStart(drivers[index], &i2cconfig);
+
+ uint8_t complete_packet[length + 1];
+ for (uint8_t i = 0; i < length; i++) {
+ complete_packet[i + 1] = data[i];
+ }
+ complete_packet[0] = regaddr;
+
+ msg_t status = i2cMasterTransmitTimeout(drivers[index], (i2c_address >> 1), complete_packet, length + 1, 0, 0, TIME_MS2I(timeout));
+ return chibios_to_qmk(&status);
+}
+
+i2c_status_t i2c_readReg(uint8_t index, uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) {
+ if(index >= I2C_COUNT) {
+ return I2C_STATUS_ERROR;
+ }
+ i2c_address = devaddr;
+ i2cStart(drivers[index], &i2cconfig);
+ msg_t status = i2cMasterTransmitTimeout(drivers[index], (i2c_address >> 1), ®addr, 1, data, length, TIME_MS2I(timeout));
+ return chibios_to_qmk(&status);
+}
+
+void i2c_stop(uint8_t index) {
+ if(index < I2C_COUNT) {
+ i2cStop(drivers[index]);
+ }
+}
+
+#endif
diff --git a/keyboards/k_type/i2c_master.h b/keyboards/k_type/i2c_master.h
new file mode 100644
index 0000000000..5a7893fae8
--- /dev/null
+++ b/keyboards/k_type/i2c_master.h
@@ -0,0 +1,127 @@
+/* Copyright 2018 Jack Humbert
+ * Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+/* This library follows the convention of the AVR i2c_master library.
+ * As a result addresses are expected to be already shifted (addr << 1).
+ * I2CD1 is the default driver which corresponds to pins B6 and B7. This
+ * can be changed.
+ * Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that
+ * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file.
+ */
+#pragma once
+
+#include
+#include
+
+#ifndef I2C_COUNT
+# define I2C_COUNT 1
+#endif
+
+#ifdef I2C1_BANK
+# define I2C1_SCL_BANK I2C1_BANK
+# define I2C1_SDA_BANK I2C1_BANK
+#endif
+
+#ifndef I2C1_SCL_BANK
+# define I2C1_SCL_BANK GPIOB
+#endif
+
+#ifndef I2C1_SDA_BANK
+# define I2C1_SDA_BANK GPIOB
+#endif
+
+
+#ifdef USE_I2C2
+# ifdef I2C2_BANK
+# define I2C2_SCL_BANK I2C2_BANK
+# define I2C2_SDA_BANK I2C2_BANK
+# endif
+# ifndef I2C2_SCL_BANK
+# define I2C2_SCL_BANK GPIOC
+# endif
+# ifndef I2C2_SDA_BANK
+# define I2C2_SDA_BANK GPIOC
+# endif
+#endif
+
+#ifndef I2C1_SCL
+# define I2C1_SCL 6
+#endif
+#ifndef I2C1_SDA
+# define I2C1_SDA 7
+#endif
+
+#ifdef USE_I2CV1
+# ifndef I2C1_OPMODE
+# define I2C1_OPMODE OPMODE_I2C
+# endif
+# ifndef I2C1_CLOCK_SPEED
+# define I2C1_CLOCK_SPEED 100000 /* 400000 */
+# endif
+# ifndef I2C1_DUTY_CYCLE
+# define I2C1_DUTY_CYCLE STD_DUTY_CYCLE /* FAST_DUTY_CYCLE_2 */
+# endif
+#else
+// The default timing values below configures the I2C clock to 400khz assuming a 72Mhz clock
+// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
+# ifndef I2C1_TIMINGR_PRESC
+# define I2C1_TIMINGR_PRESC 0U
+# endif
+# ifndef I2C1_TIMINGR_SCLDEL
+# define I2C1_TIMINGR_SCLDEL 7U
+# endif
+# ifndef I2C1_TIMINGR_SDADEL
+# define I2C1_TIMINGR_SDADEL 0U
+# endif
+# ifndef I2C1_TIMINGR_SCLH
+# define I2C1_TIMINGR_SCLH 38U
+# endif
+# ifndef I2C1_TIMINGR_SCLL
+# define I2C1_TIMINGR_SCLL 129U
+# endif
+#endif
+
+#ifdef USE_GPIOV1
+# ifndef I2C1_SCL_PAL_MODE
+# define I2C1_SCL_PAL_MODE PAL_MODE_STM32_ALTERNATE_OPENDRAIN
+# endif
+# ifndef I2C1_SDA_PAL_MODE
+# define I2C1_SDA_PAL_MODE PAL_MODE_STM32_ALTERNATE_OPENDRAIN
+# endif
+#else
+// The default PAL alternate modes are used to signal that the pins are used for I2C
+# ifndef I2C1_SCL_PAL_MODE
+# define I2C1_SCL_PAL_MODE 4
+# endif
+# ifndef I2C1_SDA_PAL_MODE
+# define I2C1_SDA_PAL_MODE 4
+# endif
+#endif
+
+typedef int16_t i2c_status_t;
+
+#define I2C_STATUS_SUCCESS (0)
+#define I2C_STATUS_ERROR (-1)
+#define I2C_STATUS_TIMEOUT (-2)
+
+void i2c_init(I2CDriver *driver, ioportid_t scl_port, ioportid_t sda_port, iopadid_t scl_pad, iopadid_t sda_pad);
+i2c_status_t i2c_start(uint8_t index, uint8_t address);
+i2c_status_t i2c_transmit(uint8_t index, uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout);
+i2c_status_t i2c_receive(uint8_t index, uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
+i2c_status_t i2c_writeReg(uint8_t index, uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout);
+i2c_status_t i2c_readReg(uint8_t index, uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
+void i2c_stop(uint8_t index);
diff --git a/keyboards/k_type/is31fl3733-dual.c b/keyboards/k_type/is31fl3733-dual.c
new file mode 100644
index 0000000000..8f39e73c69
--- /dev/null
+++ b/keyboards/k_type/is31fl3733-dual.c
@@ -0,0 +1,236 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2018 Jack Humbert
+ * Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#ifdef RGB_MATRIX_ENABLE
+
+#include "is31fl3733-dual.h"
+#include "i2c_master.h"
+#include "wait.h"
+
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// The address will vary depending on your wiring:
+// 00 <-> GND
+// 01 <-> SCL
+// 10 <-> SDA
+// 11 <-> VCC
+// ADDR1 represents A1:A0 of the 7-bit address.
+// ADDR2 represents A3:A2 of the 7-bit address.
+// The result is: 0b101(ADDR2)(ADDR1)
+#define ISSI_ADDR_DEFAULT 0x50
+
+#define ISSI_COMMANDREGISTER 0xFD
+#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE
+#define ISSI_INTERRUPTMASKREGISTER 0xF0
+#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
+
+#define ISSI_PAGE_LEDCONTROL 0x00 // PG0
+#define ISSI_PAGE_PWM 0x01 // PG1
+#define ISSI_PAGE_AUTOBREATH 0x02 // PG2
+#define ISSI_PAGE_FUNCTION 0x03 // PG3
+
+#define ISSI_REG_CONFIGURATION 0x00 // PG3
+#define ISSI_REG_GLOBALCURRENT 0x01 // PG3
+#define ISSI_REG_RESET 0x11 // PG3
+#define ISSI_REG_SWPULLUP 0x0F // PG3
+#define ISSI_REG_CSPULLUP 0x10 // PG3
+
+#ifndef ISSI_TIMEOUT
+# define ISSI_TIMEOUT 100
+#endif
+
+#ifndef ISSI_PERSISTENCE
+# define ISSI_PERSISTENCE 0
+#endif
+
+// Transfer buffer for TWITransmitData()
+uint8_t g_twi_transfer_buffer[20];
+
+// These buffers match the IS31FL3733 PWM registers.
+// The control buffers match the PG0 LED On/Off registers.
+// Storing them like this is optimal for I2C transfers to the registers.
+// We could optimize this and take out the unused registers from these
+// buffers and the transfers in IS31FL3733_write_pwm_buffer() but it's
+// probably not worth the extra complexity.
+uint8_t g_pwm_buffer[DRIVER_COUNT][192];
+bool g_pwm_buffer_update_required[DRIVER_COUNT] = {false};
+
+uint8_t g_led_control_registers[DRIVER_COUNT][24] = {{0}, {0}};
+bool g_led_control_registers_update_required[DRIVER_COUNT] = {false};
+
+bool IS31FL3733_write_register(uint8_t index, uint8_t addr, uint8_t reg, uint8_t data) {
+ // If the transaction fails function returns false.
+ g_twi_transfer_buffer[0] = reg;
+ g_twi_transfer_buffer[1] = data;
+
+#if ISSI_PERSISTENCE > 0
+ for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+ if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) != 0) {
+ return false;
+ }
+ }
+#else
+ if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) != 0) {
+ return false;
+ }
+#endif
+ return true;
+}
+
+bool IS31FL3733_write_pwm_buffer(uint8_t index, uint8_t addr, uint8_t *pwm_buffer) {
+ // Assumes PG1 is already selected.
+ // If any of the transactions fails function returns false.
+ // Transmit PWM registers in 12 transfers of 16 bytes.
+ // g_twi_transfer_buffer[] is 20 bytes
+
+ // Iterate over the pwm_buffer contents at 16 byte intervals.
+ for (int i = 0; i < 192; i += 16) {
+ g_twi_transfer_buffer[0] = i;
+ // Copy the data from i to i+15.
+ // Device will auto-increment register for data after the first byte
+ // Thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer.
+ for (int j = 0; j < 16; j++) {
+ g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
+ }
+
+#if ISSI_PERSISTENCE > 0
+ for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+ if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) != 0) {
+ return false;
+ }
+ }
+#else
+ if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) != 0) {
+ return false;
+ }
+#endif
+ }
+ return true;
+}
+
+void IS31FL3733_init(uint8_t bus, uint8_t addr, uint8_t sync) {
+ // In order to avoid the LEDs being driven with garbage data
+ // in the LED driver's PWM registers, shutdown is enabled last.
+ // Set up the mode and other settings, clear the PWM registers,
+ // then disable software shutdown.
+ // Sync is passed so set it according to the datasheet.
+
+ // Unlock the command register.
+ IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+ // Select PG0
+ IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
+ // Turn off all LEDs.
+ for (int i = 0x00; i <= 0x17; i++) {
+ IS31FL3733_write_register(bus, addr, i, 0x00);
+ }
+ // Unlock the command register.
+ IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+ // Select PG1
+ IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
+ // Set PWM on all LEDs to 0
+ // No need to setup Breath registers to PWM as that is the default.
+ for (int i = 0x00; i <= 0xBF; i++) {
+ IS31FL3733_write_register(bus, addr, i, 0x00);
+ }
+ // Unlock the command register.
+ IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+ // Select PG3
+ IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION);
+ // Set global current to maximum.
+ IS31FL3733_write_register(bus, addr, ISSI_REG_GLOBALCURRENT, 0xFF);
+ // Disable software shutdown.
+ IS31FL3733_write_register(bus, addr, ISSI_REG_CONFIGURATION, (sync << 6) | 0x01);
+ // Wait 10ms to ensure the device has woken up.
+ wait_ms(10);
+}
+
+void IS31FL3733_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
+ if (index >= 0 && index < DRIVER_LED_TOTAL) {
+ is31_led led = g_is31_leds[index];
+
+ g_pwm_buffer[led.driver][led.r] = red;
+ g_pwm_buffer[led.driver][led.g] = green;
+ g_pwm_buffer[led.driver][led.b] = blue;
+ g_pwm_buffer_update_required[led.driver] = true;
+ }
+}
+
+void IS31FL3733_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
+ for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
+ IS31FL3733_set_color(i, red, green, blue);
+ }
+}
+
+void IS31FL3733_set_led_control_register(uint8_t index, bool red, bool green, bool blue) {
+ is31_led led = g_is31_leds[index];
+
+ uint8_t control_register_r = led.r / 8;
+ uint8_t control_register_g = led.g / 8;
+ uint8_t control_register_b = led.b / 8;
+ uint8_t bit_r = led.r % 8;
+ uint8_t bit_g = led.g % 8;
+ uint8_t bit_b = led.b % 8;
+
+ if (red) {
+ g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r);
+ } else {
+ g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r);
+ }
+ if (green) {
+ g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g);
+ } else {
+ g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g);
+ }
+ if (blue) {
+ g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b);
+ } else {
+ g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
+ }
+
+ g_led_control_registers_update_required[led.driver] = true;
+}
+
+void IS31FL3733_update_pwm_buffers(uint8_t addr, uint8_t index) {
+ if (g_pwm_buffer_update_required[index]) {
+ // Firstly we need to unlock the command register and select PG1.
+ IS31FL3733_write_register(index, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+ IS31FL3733_write_register(index, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
+
+ // If any of the transactions fail we risk writing dirty PG0,
+ // refresh page 0 just in case.
+ if (!IS31FL3733_write_pwm_buffer(index, addr, g_pwm_buffer[index])) {
+ g_led_control_registers_update_required[index] = true;
+ }
+ }
+ g_pwm_buffer_update_required[index] = false;
+}
+
+void IS31FL3733_update_led_control_registers(uint8_t addr, uint8_t index) {
+ if (g_led_control_registers_update_required[index]) {
+ // Firstly we need to unlock the command register and select PG0
+ IS31FL3733_write_register(index, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+ IS31FL3733_write_register(index, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
+ for (int i = 0; i < 24; i++) {
+ IS31FL3733_write_register(index, addr, i, g_led_control_registers[index][i]);
+ }
+ }
+ g_led_control_registers_update_required[index] = false;
+}
+
+
+#endif
diff --git a/keyboards/k_type/is31fl3733-dual.h b/keyboards/k_type/is31fl3733-dual.h
new file mode 100644
index 0000000000..272bcdc417
--- /dev/null
+++ b/keyboards/k_type/is31fl3733-dual.h
@@ -0,0 +1,251 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2018 Jack Humbert
+ * Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#pragma once
+
+#include
+#include
+
+typedef struct is31_led {
+ uint8_t driver : 2;
+ uint8_t r;
+ uint8_t g;
+ uint8_t b;
+} __attribute__((packed)) is31_led;
+
+extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
+
+void IS31FL3733_init(uint8_t bus, uint8_t addr, uint8_t sync);
+bool IS31FL3733_write_register(uint8_t index, uint8_t addr, uint8_t reg, uint8_t data);
+bool IS31FL3733_write_pwm_buffer(uint8_t index, uint8_t addr, uint8_t *pwm_buffer);
+
+void IS31FL3733_set_color(int index, uint8_t red, uint8_t green, uint8_t blue);
+void IS31FL3733_set_color_all(uint8_t red, uint8_t green, uint8_t blue);
+
+void IS31FL3733_set_led_control_register(uint8_t index, bool red, bool green, bool blue);
+
+// This should not be called from an interrupt
+// (eg. from a timer interrupt).
+// Call this while idle (in between matrix scans).
+// If the buffer is dirty, it will update the driver with the buffer.
+void IS31FL3733_update_pwm_buffers(uint8_t addr, uint8_t index); // index is the driver index
+void IS31FL3733_update_led_control_registers(uint8_t addr, uint8_t index);
+
+#define A_1 0x00
+#define A_2 0x01
+#define A_3 0x02
+#define A_4 0x03
+#define A_5 0x04
+#define A_6 0x05
+#define A_7 0x06
+#define A_8 0x07
+#define A_9 0x08
+#define A_10 0x09
+#define A_11 0x0A
+#define A_12 0x0B
+#define A_13 0x0C
+#define A_14 0x0D
+#define A_15 0x0E
+#define A_16 0x0F
+
+#define B_1 0x10
+#define B_2 0x11
+#define B_3 0x12
+#define B_4 0x13
+#define B_5 0x14
+#define B_6 0x15
+#define B_7 0x16
+#define B_8 0x17
+#define B_9 0x18
+#define B_10 0x19
+#define B_11 0x1A
+#define B_12 0x1B
+#define B_13 0x1C
+#define B_14 0x1D
+#define B_15 0x1E
+#define B_16 0x1F
+
+#define C_1 0x20
+#define C_2 0x21
+#define C_3 0x22
+#define C_4 0x23
+#define C_5 0x24
+#define C_6 0x25
+#define C_7 0x26
+#define C_8 0x27
+#define C_9 0x28
+#define C_10 0x29
+#define C_11 0x2A
+#define C_12 0x2B
+#define C_13 0x2C
+#define C_14 0x2D
+#define C_15 0x2E
+#define C_16 0x2F
+
+#define D_1 0x30
+#define D_2 0x31
+#define D_3 0x32
+#define D_4 0x33
+#define D_5 0x34
+#define D_6 0x35
+#define D_7 0x36
+#define D_8 0x37
+#define D_9 0x38
+#define D_10 0x39
+#define D_11 0x3A
+#define D_12 0x3B
+#define D_13 0x3C
+#define D_14 0x3D
+#define D_15 0x3E
+#define D_16 0x3F
+
+#define E_1 0x40
+#define E_2 0x41
+#define E_3 0x42
+#define E_4 0x43
+#define E_5 0x44
+#define E_6 0x45
+#define E_7 0x46
+#define E_8 0x47
+#define E_9 0x48
+#define E_10 0x49
+#define E_11 0x4A
+#define E_12 0x4B
+#define E_13 0x4C
+#define E_14 0x4D
+#define E_15 0x4E
+#define E_16 0x4F
+
+#define F_1 0x50
+#define F_2 0x51
+#define F_3 0x52
+#define F_4 0x53
+#define F_5 0x54
+#define F_6 0x55
+#define F_7 0x56
+#define F_8 0x57
+#define F_9 0x58
+#define F_10 0x59
+#define F_11 0x5A
+#define F_12 0x5B
+#define F_13 0x5C
+#define F_14 0x5D
+#define F_15 0x5E
+#define F_16 0x5F
+
+#define G_1 0x60
+#define G_2 0x61
+#define G_3 0x62
+#define G_4 0x63
+#define G_5 0x64
+#define G_6 0x65
+#define G_7 0x66
+#define G_8 0x67
+#define G_9 0x68
+#define G_10 0x69
+#define G_11 0x6A
+#define G_12 0x6B
+#define G_13 0x6C
+#define G_14 0x6D
+#define G_15 0x6E
+#define G_16 0x6F
+
+#define H_1 0x70
+#define H_2 0x71
+#define H_3 0x72
+#define H_4 0x73
+#define H_5 0x74
+#define H_6 0x75
+#define H_7 0x76
+#define H_8 0x77
+#define H_9 0x78
+#define H_10 0x79
+#define H_11 0x7A
+#define H_12 0x7B
+#define H_13 0x7C
+#define H_14 0x7D
+#define H_15 0x7E
+#define H_16 0x7F
+
+#define I_1 0x80
+#define I_2 0x81
+#define I_3 0x82
+#define I_4 0x83
+#define I_5 0x84
+#define I_6 0x85
+#define I_7 0x86
+#define I_8 0x87
+#define I_9 0x88
+#define I_10 0x89
+#define I_11 0x8A
+#define I_12 0x8B
+#define I_13 0x8C
+#define I_14 0x8D
+#define I_15 0x8E
+#define I_16 0x8F
+
+#define J_1 0x90
+#define J_2 0x91
+#define J_3 0x92
+#define J_4 0x93
+#define J_5 0x94
+#define J_6 0x95
+#define J_7 0x96
+#define J_8 0x97
+#define J_9 0x98
+#define J_10 0x99
+#define J_11 0x9A
+#define J_12 0x9B
+#define J_13 0x9C
+#define J_14 0x9D
+#define J_15 0x9E
+#define J_16 0x9F
+
+#define K_1 0xA0
+#define K_2 0xA1
+#define K_3 0xA2
+#define K_4 0xA3
+#define K_5 0xA4
+#define K_6 0xA5
+#define K_7 0xA6
+#define K_8 0xA7
+#define K_9 0xA8
+#define K_10 0xA9
+#define K_11 0xAA
+#define K_12 0xAB
+#define K_13 0xAC
+#define K_14 0xAD
+#define K_15 0xAE
+#define K_16 0xAF
+
+#define L_1 0xB0
+#define L_2 0xB1
+#define L_3 0xB2
+#define L_4 0xB3
+#define L_5 0xB4
+#define L_6 0xB5
+#define L_7 0xB6
+#define L_8 0xB7
+#define L_9 0xB8
+#define L_10 0xB9
+#define L_11 0xBA
+#define L_12 0xBB
+#define L_13 0xBC
+#define L_14 0xBD
+#define L_15 0xBE
+#define L_16 0xBF
diff --git a/keyboards/k_type/k_type-rgbdriver.c b/keyboards/k_type/k_type-rgbdriver.c
new file mode 100644
index 0000000000..8369aa909e
--- /dev/null
+++ b/keyboards/k_type/k_type-rgbdriver.c
@@ -0,0 +1,57 @@
+/* Copyright 2021 Andrew Fahmy
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#ifdef RGB_MATRIX_ENABLE
+
+#include "rgb_matrix.h"
+#include "i2c_master.h"
+#include "is31fl3733-dual.h"
+
+
+
+static void init(void) {
+ i2c_init(&I2CD1, I2C1_SCL_BANK, I2C1_SDA_BANK, I2C1_SCL, I2C1_SDA);
+ IS31FL3733_init(0, DRIVER_ADDR_1, 0);
+# ifdef USE_I2C2
+ i2c_init(&I2CD2, I2C2_SCL_BANK, I2C2_SDA_BANK, I2C2_SCL, I2C2_SDA);
+ IS31FL3733_init(1, DRIVER_ADDR_2, 0);
+# endif
+ for (int index = 0; index < DRIVER_LED_TOTAL; index++) {
+ bool enabled = true;
+ // This only caches it for later
+ IS31FL3733_set_led_control_register(index, enabled, enabled, enabled);
+ }
+ IS31FL3733_update_led_control_registers(DRIVER_ADDR_1, 0);
+# ifdef USE_I2C2
+ IS31FL3733_update_led_control_registers(DRIVER_ADDR_2, 1);
+# endif
+}
+
+static void flush(void) {
+ IS31FL3733_update_pwm_buffers(DRIVER_ADDR_1, 0);
+# ifdef USE_I2C2
+ IS31FL3733_update_pwm_buffers(DRIVER_ADDR_2, 1);
+# endif
+}
+
+const rgb_matrix_driver_t rgb_matrix_driver = {
+ .init = init,
+ .flush = flush,
+ .set_color = IS31FL3733_set_color,
+ .set_color_all = IS31FL3733_set_color_all,
+};
+
+#endif
diff --git a/keyboards/k_type/k_type.c b/keyboards/k_type/k_type.c
index ae62f0e723..61c5881454 100644
--- a/keyboards/k_type/k_type.c
+++ b/keyboards/k_type/k_type.c
@@ -17,7 +17,12 @@ along with this program. If not, see .
#include "k_type.h"
+
#ifdef RGB_MATRIX_ENABLE
+
+#include "is31fl3733-dual.h"
+
+
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
{ 0, B_1, A_1, C_1 },
{ 0, B_2, A_2, C_2 },
@@ -45,11 +50,11 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
{ 0, E_7, D_7, F_7 },
{ 0, E_8, D_8, F_8 },
{ 0, E_9, D_9, F_9 },
- { 0, E_10, D_1, F_10 },
- { 0, E_11, D_1, F_11 },
- { 0, E_12, D_1, F_12 },
- { 0, E_13, D_1, F_13 },
- { 0, E_14, D_1, F_14 },
+ { 0, E_10, D_10, F_10 },
+ { 0, E_11, D_11, F_11 },
+ { 0, E_12, D_12, F_12 },
+ { 0, E_13, D_13, F_13 },
+ { 0, E_14, D_14, F_14 },
{ 0, E_15, D_15, F_15 },
{ 0, E_16, D_16, F_16 },
@@ -62,11 +67,11 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
{ 0, H_7, G_7, I_7 },
{ 0, H_8, G_8, I_8 },
{ 0, H_9, G_9, I_9 },
- { 0, H_10, G_1, I_10 },
- { 0, H_11, G_1, I_11 },
- { 0, H_12, G_1, I_12 },
- { 0, H_13, G_1, I_13 },
- { 0, H_14, G_1, I_14 },
+ { 0, H_10, G_10, I_10 },
+ { 0, H_11, G_11, I_11 },
+ { 0, H_12, G_12, I_12 },
+ { 0, H_13, G_13, I_13 },
+ { 0, H_14, G_14, I_14 },
{ 0, H_15, G_15, I_15 },
{ 0, H_16, G_16, I_16 },
@@ -79,106 +84,123 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
{ 0, K_7, J_7, L_7 },
{ 0, K_8, J_8, L_8 },
{ 0, K_9, J_9, L_9 },
- { 0, K_10, J_1, L_10 },
- { 0, K_11, J_1, L_11 },
- { 0, K_12, J_1, L_12 },
- { 0, K_13, J_1, L_13 },
- { 0, K_14, J_1, L_14 },
+ { 0, K_10, J_10, L_10 },
+ { 0, K_11, J_11, L_11 },
+ { 0, K_12, J_12, L_12 },
+ { 0, K_13, J_13, L_13 },
+ { 0, K_14, J_14, L_14 },
{ 0, K_15, J_15, L_15 },
{ 0, K_16, J_16, L_16 },
// Driver 2 is on I2C2 - currently not usable with i2c_master
- //{ 1, B_1, A_1, C_1 },
- //{ 1, B_2, A_2, C_2 },
- //{ 1, B_3, A_3, C_3 },
- //{ 1, B_4, A_4, C_4 },
- //{ 1, B_5, A_5, C_5 },
- //{ 1, B_6, A_6, C_6 },
- //{ 1, B_7, A_7, C_7 },
- //{ 1, B_8, A_8, C_8 },
- //{ 1, B_9, A_9, C_9 },
- //{ 1, B_10, A_10, C_10 },
- //{ 1, B_11, A_11, C_11 },
- //{ 1, B_12, A_12, C_12 },
- //{ 1, B_13, A_13, C_13 },
- //{ 1, B_14, A_14, C_14 },
- //{ 1, B_15, A_15, C_15 },
- //{ 1, B_16, A_16, C_16 },
+ { 1, B_1, A_1, C_1 },
+ { 1, B_2, A_2, C_2 },
+ { 1, B_3, A_3, C_3 },
+ { 1, B_4, A_4, C_4 },
+ { 1, B_5, A_5, C_5 },
+ { 1, B_6, A_6, C_6 },
+ { 1, B_7, A_7, C_7 },
+ { 1, B_8, A_8, C_8 },
+ { 1, B_9, A_9, C_9 },
+ { 1, B_10, A_10, C_10 },
+ { 1, B_11, A_11, C_11 },
+ { 1, B_12, A_12, C_12 },
+ { 1, B_13, A_13, C_13 },
+ { 1, B_14, A_14, C_14 },
+ { 1, B_15, A_15, C_15 },
+ { 1, B_16, A_16, C_16 },
- //{ 1, E_1, D_1, F_1 },
- //{ 1, E_2, D_2, F_2 },
- //{ 1, E_3, D_3, F_3 },
- //{ 1, E_4, D_4, F_4 },
- //{ 1, E_5, D_5, F_5 },
- //{ 1, E_6, D_6, F_6 },
- //{ 1, E_7, D_7, F_7 },
- //{ 1, E_8, D_8, F_8 },
- //{ 1, E_9, D_9, F_9 },
- //{ 1, E_10, D_1, F_10 },
- //{ 1, E_11, D_1, F_11 },
- //{ 1, E_12, D_1, F_12 },
- //{ 1, E_13, D_1, F_13 },
- //{ 1, E_14, D_1, F_14 },
- //{ 1, E_15, D_15, F_15 },
- //{ 1, E_16, D_16, F_16 },
+ { 1, E_1, D_1, F_1 },
+ { 1, E_2, D_2, F_2 },
+ { 1, E_3, D_3, F_3 },
+ { 1, E_4, D_4, F_4 },
+ { 1, E_5, D_5, F_5 },
+ { 1, E_6, D_6, F_6 },
+ { 1, E_7, D_7, F_7 },
+ { 1, E_8, D_8, F_8 },
+ { 1, E_9, D_9, F_9 },
+ { 1, E_10, D_10, F_10 },
+ { 1, E_11, D_11, F_11 },
+ { 1, E_12, D_12, F_12 },
+ { 1, E_13, D_13, F_13 },
+ { 1, E_14, D_14, F_14 },
+ { 1, E_15, D_15, F_15 },
+ { 1, E_16, D_16, F_16 },
- //{ 1, H_1, G_1, I_1 },
- //{ 1, H_2, G_2, I_2 },
- //{ 1, H_3, G_3, I_3 },
- //{ 1, H_4, G_4, I_4 },
- //{ 1, H_5, G_5, I_5 },
- //{ 1, H_6, G_6, I_6 },
- //{ 1, H_7, G_7, I_7 },
- //{ 1, H_8, G_8, I_8 },
- //{ 1, H_9, G_9, I_9 },
- //{ 1, H_10, G_1, I_10 },
- //{ 1, H_11, G_1, I_11 },
- //{ 1, H_12, G_1, I_12 },
- //{ 1, H_13, G_1, I_13 },
- //{ 1, H_14, G_1, I_14 },
- //{ 1, H_15, G_15, I_15 },
- //{ 1, H_16, G_16, I_16 },
+ { 1, H_1, G_1, I_1 },
+ { 1, H_2, G_2, I_2 },
+ { 1, H_3, G_3, I_3 },
+ { 1, H_4, G_4, I_4 },
+ { 1, H_5, G_5, I_5 },
+ { 1, H_6, G_6, I_6 },
+ { 1, H_7, G_7, I_7 },
+ { 1, H_8, G_8, I_8 },
+ { 1, H_9, G_9, I_9 },
+ { 1, H_10, G_10, I_10 },
+ { 1, H_11, G_11, I_11 },
+ { 1, H_12, G_12, I_12 },
+ { 1, H_13, G_13, I_13 },
+ { 1, H_14, G_14, I_14 },
+ { 1, H_15, G_15, I_15 },
+ { 1, H_16, G_16, I_16 },
- //{ 1, K_1, J_1, L_1 },
- //{ 1, K_2, J_2, L_2 },
- //{ 1, K_3, J_3, L_3 },
- //{ 1, K_4, J_4, L_4 },
- //{ 1, K_5, J_5, L_5 },
- //{ 1, K_6, J_6, L_6 },
- //{ 1, K_7, J_7, L_7 }
+ { 1, K_1, J_1, L_1 },
+ { 1, K_2, J_2, L_2 },
+ { 1, K_3, J_3, L_3 },
+ { 1, K_4, J_4, L_4 },
+ { 1, K_5, J_5, L_5 },
+ { 1, K_6, J_6, L_6 },
+ { 1, K_7, J_7, L_7 }
};
led_config_t g_led_config = {
{
// Key Matrix to LED Index
- { 0, 10, 20, 29, 38, 47, 57, NO_LED, NO_LED, NO_LED },
- { 1, 11, 21, NO_LED, 39, 48, 58, NO_LED, NO_LED, NO_LED },
- { 2, 12, 22, 30, 40, 49, 59, NO_LED, NO_LED, NO_LED },
- { 3, 13, 23, 31, 41, 50, 60, NO_LED, NO_LED, NO_LED },
- { 4, 14, 24, 32, 42, 51, 61, NO_LED, NO_LED, NO_LED },
- { 5, 15, 25, 33, 43, 52, NO_LED, NO_LED, NO_LED, NO_LED },
- { 6, 16, 26, 34, 44, 53, 62, NO_LED, NO_LED, NO_LED },
- { 7, 17, 27, 35, 45, 54, NO_LED, NO_LED, NO_LED, NO_LED },
- { 8, 18, 28, 36, 46, 55, 63, NO_LED, NO_LED, NO_LED },
- { 9, 19, NO_LED, 37, NO_LED, 56, NO_LED, NO_LED, NO_LED, NO_LED }
+ { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 },
+ { 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 },
+ { 20, 21, 22, 23, 24, 25, 26, 27, 28, NO_LED },
+ { 29, NO_LED, 30, 31, 32, 33, 34, 35, 36, 37 },
+ { 38, 39, 40, 41, 42, 43, 44, 45, 46, NO_LED },
+ { 47, 48, 49, 50, 51, 52, 53, 54, 55, 56 },
+ { 57, 58, 59, 60, 61, NO_LED, 62, NO_LED, 63, NO_LED },
+ { 64, 65, 66, 67, 68, 69, 70, 71, 72, 73 },
+ { NO_LED, 74, NO_LED, 75, 76, 77, 78, 79, 80, 81 },
+ { 82, 83, 84, 85, 86, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED }
}, {
// LED Index to Physical Position
+ // Key LED
{ 0, 0 }, { 26.35, 0 }, { 39.53, 0 }, { 52.71, 0 }, { 65.88, 0 }, { 79.06, 0 }, { 92.24, 0 }, { 105.41, 0 }, { 118.59, 0 }, { 131.77, 0 }, { 144.94, 0 }, { 158.12, 0 }, { 171.29, 0 }, { 197.65, 0 }, { 210.82, 0 }, { 224, 0 },
{ 0, 21.33 }, { 13.18, 21.33 }, { 26.35, 21.33 }, { 39.53, 21.33 }, { 52.71, 21.33 }, { 65.88, 21.33 }, { 79.06, 21.33 }, { 92.24, 21.33 }, { 105.41, 21.33 }, { 118.59, 21.33 }, { 131.77, 21.33 }, { 144.94, 21.33 }, { 158.12, 21.33 }, { 171.29, 21.33 }, { 197.65, 21.33 }, { 210.82, 21.33 }, { 224, 21.33 },
{ 0, 32 }, { 13.18, 32 }, { 26.35, 32 }, { 39.53, 32 }, { 52.71, 32 }, { 65.88, 32 }, { 79.06, 32 }, { 92.24, 32 }, { 105.41, 32 }, { 118.59, 32 }, { 131.77, 32 }, { 144.94, 32 }, { 158.12, 32 }, { 171.29, 32 }, { 197.65, 32 }, { 210.82, 32 }, { 224, 32 },
{ 0, 42.67 }, { 13.18, 42.67 }, { 26.35, 42.67 }, { 39.53, 42.67 }, { 52.71, 42.67 }, { 65.88, 42.67 }, { 79.06, 42.67 }, { 92.24, 42.67 }, { 105.41, 42.67 }, { 118.59, 42.67 }, { 131.77, 42.67 }, { 144.94, 42.67 }, { 171.29, 42.67 },
- { 0, 53.33 }, //{ 26.35, 53.33 }, { 39.53, 53.33 }, { 52.71, 53.33 }, { 65.88, 53.33 }, { 79.06, 53.33 }, { 92.24, 53.33 }, { 105.41, 53.33 }, { 118.59, 53.33 }, { 131.77, 53.33 }, { 144.94, 53.33 }, { 171.29, 53.33 }, { 210.82, 53.33 },
- //{ 0, 64 }, { 13.18, 64 }, { 26.35, 64 }, { 79.06, 64 }, { 131.77, 64 }, { 144.94, 64 }, { 158.12, 64 }, { 171.29, 64 }, { 197.65, 64 }, { 210.82, 64 }, { 224, 64 }
+ { 0, 53.33 }, { 26.35, 53.33 }, { 39.53, 53.33 }, { 52.71, 53.33 }, { 65.88, 53.33 }, { 79.06, 53.33 }, { 92.24, 53.33 }, { 105.41, 53.33 }, { 118.59, 53.33 }, { 131.77, 53.33 }, { 144.94, 53.33 }, { 171.29, 53.33 }, { 210.82, 53.33 },
+ { 0, 64 }, { 13.18, 64 }, { 26.35, 64 }, { 79.06, 64 }, { 131.77, 64 }, { 144.94, 64 }, { 158.12, 64 }, { 171.29, 64 }, { 197.65, 64 }, { 210.82, 64 }, { 224, 64 },
+
+ // Underglow LED
+ { 224, 64 }, { 206.77, 64 }, { 189.54, 64 }, { 172.31, 64 }, { 155.08, 64 }, { 137.85, 64 }, { 120.61, 64 }, { 103.38, 64 }, { 86.15, 64 }, { 68.92, 64 }, { 51.69, 64 }, { 34.46, 64 }, { 17.23, 64 }, { 0, 64 },
+ { 0, 42.67 }, { 0, 21.33 },
+ { 0, 0 }, { 17.23, 0 }, { 34.46, 0 }, { 51.69, 0 }, { 68.92, 0 }, { 86.15, 0 }, { 103.38, 0 }, { 120.61, 0 }, { 137.85, 0 }, { 155.08, 0 }, { 172.31, 0 }, { 189.54, 0 }, { 206.77, 0 }, { 224, 0 },
+ { 224, 21.33 }, { 224, 42.67 }
}, {
// LED Index to Flag
- 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+ //Key LED
+ 1, 4, 4, 4, 4, 1, 1, 1, 1, 4, 4, 4, 4, 1, 1, 1,
- 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
- 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
- 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
- 1, //4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1,
- //1, 1, 1, 4, 1, 1, 1, 1, 1, 1, 1
+ 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 4, 4, 4,
+ 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+ 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
+ 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1,
+ 1, 1, 1, 4, 1, 1, 1, 1, 1, 1, 1,
+
+ // Underglow LED
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+
+ 2, 2,
+
+ 2, 2,
+
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
}
};
#endif
diff --git a/keyboards/k_type/keymaps/andrew-fahmy/config.h b/keyboards/k_type/keymaps/andrew-fahmy/config.h
new file mode 100644
index 0000000000..c035255de6
--- /dev/null
+++ b/keyboards/k_type/keymaps/andrew-fahmy/config.h
@@ -0,0 +1,52 @@
+/* Copyright 2021 Andrew Fahmy
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#pragma once
+
+
+#ifdef RGB_MATRIX_ENABLE
+// # define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+// # define RGB_MATRIX_KEYPRESSES
+# define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_RAINDROPS
+
+// # define DEBUG_MATRIX_SCAN_RATE
+
+# define RGB_MATRIX_LED_FLUSH_LIMIT 100
+// # define RGB_MATRIX_LED_PROCESS_LIMIT 2
+
+// i2c_master defines
+# define I2C_COUNT 2
+
+# define I2C1_BANK GPIOB
+# define I2C1_SCL 0 // A2 on pinout = B0
+# define I2C1_SDA 1 // A2 on pinout = B1
+# define I2C1_SCL_PAL_MODE PAL_MODE_ALTERNATIVE_2
+# define I2C1_SDA_PAL_MODE PAL_MODE_ALTERNATIVE_2
+
+# define USE_I2C2
+# define I2C2_BANK GPIOC
+# define I2C2_SCL 10 // A2 on pinout = C10
+# define I2C2_SDA 11 // A2 on pinout = C11
+# define I2C2_SCL_PAL_MODE PAL_MODE_ALTERNATIVE_2
+# define I2C2_SDA_PAL_MODE PAL_MODE_ALTERNATIVE_2
+
+# define DRIVER_ADDR_1 0b1010000
+# define DRIVER_ADDR_2 0b1010000
+# define DRIVER_COUNT 2
+# define DRIVER_1_LED_TOTAL 64
+# define DRIVER_2_LED_TOTAL 55
+# define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
+#endif
diff --git a/keyboards/k_type/keymaps/andrew-fahmy/keymap.c b/keyboards/k_type/keymaps/andrew-fahmy/keymap.c
new file mode 100644
index 0000000000..1611c25e41
--- /dev/null
+++ b/keyboards/k_type/keymaps/andrew-fahmy/keymap.c
@@ -0,0 +1,60 @@
+/* Copyright 2021 Andrew Fahmy
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#include QMK_KEYBOARD_H
+
+enum layer_names {
+ _MAIN,
+ _L1
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [_MAIN] = LAYOUT_tkl_ansi(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS,
+
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN,
+ MO(_L1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
+ KC_LCTL, _______, KC_LALT, KC_SPC, KC_RALT, MO(_L1), KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+ ),
+ [_L1] = LAYOUT_tkl_ansi(
+ RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, RGB_MOD, _______,
+
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SPD, RGB_SPI, _______, RGB_HUI, RGB_SAI, RGB_VAI,
+ _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_VAD,
+ _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, KC_LGUI, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ )
+};
+
+void keyboard_post_init_user(void) {
+ // Customise these values to desired behaviour
+ // debug_enable=true;
+ // debug_matrix=true;
+ // debug_keyboard=true;
+ // debug_mouse=true;
+}
+
+#ifdef RGB_MATRIX_ENABLE
+// Turn off SDB
+void keyboard_pre_init_user() {
+ palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPad(GPIOB, 16);
+}
+
+#endif
diff --git a/keyboards/k_type/keymaps/andrew-fahmy/rules.mk b/keyboards/k_type/keymaps/andrew-fahmy/rules.mk
new file mode 100644
index 0000000000..aad92997d0
--- /dev/null
+++ b/keyboards/k_type/keymaps/andrew-fahmy/rules.mk
@@ -0,0 +1 @@
+RGB_MATRIX_ENABLE = yes
diff --git a/keyboards/k_type/keymaps/rgb/config.h b/keyboards/k_type/keymaps/rgb/config.h
index 206b76f2b6..4c5d234545 100644
--- a/keyboards/k_type/keymaps/rgb/config.h
+++ b/keyboards/k_type/keymaps/rgb/config.h
@@ -2,22 +2,31 @@
#ifdef RGB_MATRIX_ENABLE
# define RGB_MATRIX_KEYPRESSES
-# define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL
+# define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR
+
+# define RGB_MATRIX_LED_FLUSH_LIMIT 100
+
// i2c_master defines
+# define I2C_COUNT 2
+
+# define I2C1_BANK GPIOB
# define I2C1_SCL 0 // A2 on pinout = B0
# define I2C1_SDA 1 // A2 on pinout = B1
# define I2C1_SCL_PAL_MODE PAL_MODE_ALTERNATIVE_2
# define I2C1_SDA_PAL_MODE PAL_MODE_ALTERNATIVE_2
-//# define I2C2_SCL 10 // A2 on pinout = C10
-//# define I2C2_SDA 11 // A2 on pinout = C11
-//# define I2C2_SCL_PAL_MODE PAL_MODE_ALTERNATIVE_2
-//# define I2C2_SDA_PAL_MODE PAL_MODE_ALTERNATIVE_2
+
+# define USE_I2C2
+# define I2C2_BANK GPIOC
+# define I2C2_SCL 10 // A2 on pinout = C10
+# define I2C2_SDA 11 // A2 on pinout = C11
+# define I2C2_SCL_PAL_MODE PAL_MODE_ALTERNATIVE_2
+# define I2C2_SDA_PAL_MODE PAL_MODE_ALTERNATIVE_2
# define DRIVER_ADDR_1 0b1010000
-# define DRIVER_ADDR_2 0b1010001
+# define DRIVER_ADDR_2 0b1010000
# define DRIVER_COUNT 2
# define DRIVER_1_LED_TOTAL 64
-//# define DRIVER_2_LED_TOTAL 55
-# define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL
+# define DRIVER_2_LED_TOTAL 55
+# define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
#endif
diff --git a/keyboards/k_type/keymaps/rgb/keymap.c b/keyboards/k_type/keymaps/rgb/keymap.c
index 4ed15e5d66..88f5eaa37b 100644
--- a/keyboards/k_type/keymaps/rgb/keymap.c
+++ b/keyboards/k_type/keymaps/rgb/keymap.c
@@ -8,12 +8,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN,
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
- KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
),
[1] = LAYOUT_tkl_ansi(
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, RGB_MOD, _______,
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_HUI, RGB_SAI, RGB_VAI,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SPD, RGB_SPI, _______, RGB_HUI, RGB_SAI, RGB_VAI,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_VAD,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
diff --git a/keyboards/k_type/keymaps/rgb/readme.md b/keyboards/k_type/keymaps/rgb/readme.md
index 794052c57a..330321976c 100644
--- a/keyboards/k_type/keymaps/rgb/readme.md
+++ b/keyboards/k_type/keymaps/rgb/readme.md
@@ -2,4 +2,6 @@
This is an experimental keymap adding support for RGB Matrix on the K-Type.
-The board has two IS31FL3733 LED controllers, but they are each on different I2C buses, which QMK's `i2c_master` implementation currently does not support. As a result, all the keys after the left shift will not be lit.
+The keyboard should now support full RGB lightings. The lighting animations are running at 10 fps for performance reasons.
+You can configure this by changing the `RGB_MATRIX_LED_FLUSH_LIMIT` inside the `config.h` file to a lower value.
+For example `RGB_MATRIX_LED_FLUSH_LIMIT 16` would mean that the animations run every 16 ms or at 60 fps.
diff --git a/keyboards/k_type/mcuconf.h b/keyboards/k_type/mcuconf.h
index 28f3c6cdae..1d9ecf6104 100644
--- a/keyboards/k_type/mcuconf.h
+++ b/keyboards/k_type/mcuconf.h
@@ -51,4 +51,7 @@
#define KINETIS_I2C_USE_I2C0 TRUE
#define KINETIS_I2C_I2C0_PRIORITY 4
+#define KINETIS_I2C_USE_I2C1 TRUE
+#define KINETIS_I2C_I2C0_PRIORITY 4
+
#endif /* _MCUCONF_H_ */
diff --git a/keyboards/k_type/rules.mk b/keyboards/k_type/rules.mk
index 18b6e3c8df..369cab4f09 100644
--- a/keyboards/k_type/rules.mk
+++ b/keyboards/k_type/rules.mk
@@ -27,7 +27,11 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
BLUETOOTH_ENABLE = no # Enable Bluetooth
AUDIO_ENABLE = no # Audio output
RGB_MATRIX_ENABLE = no
-RGB_MATRIX_DRIVER = IS31FL3733
+RGB_MATRIX_DRIVER = custom
+
+SRC += k_type-rgbdriver.c
+
+QUANTUM_LIB_SRC += i2c_master.c is31fl3733-dual.c
LAYOUTS = tkl_ansi