1
0
Fork 0

Fix nyquist (and other splits using D2 in debouncing) (#3067)

* Update default Nyquist revision

* LED slave fix

* Sync changes from lets_split

* Add needed check for debouncing

* Remove line that was setting PD2 pin and interfering with use of that pin

* Add backlight key to keymap
This commit is contained in:
Danny 2018-05-28 18:02:41 -04:00 committed by Drashna Jaelre
parent 8ddebce2d7
commit 2b677ddac9
14 changed files with 50 additions and 18 deletions

View file

@ -146,7 +146,6 @@ uint8_t _matrix_scan(void)
if (matrix_changed) { if (matrix_changed) {
debouncing = true; debouncing = true;
debouncing_time = timer_read(); debouncing_time = timer_read();
PORTD ^= (1 << 2);
} }
# else # else

View file

@ -151,7 +151,6 @@ uint8_t _matrix_scan(void)
if (matrix_changed) { if (matrix_changed) {
debouncing = true; debouncing = true;
debouncing_time = timer_read(); debouncing_time = timer_read();
PORTD ^= (1 << 2);
} }
# else # else

View file

@ -149,7 +149,6 @@ uint8_t _matrix_scan(void)
if (matrix_changed) { if (matrix_changed) {
debouncing = true; debouncing = true;
debouncing_time = timer_read(); debouncing_time = timer_read();
PORTD ^= (1 << 2);
} }
# else # else

View file

@ -157,7 +157,6 @@ uint8_t _matrix_scan(void)
if (matrix_changed) { if (matrix_changed) {
debouncing = true; debouncing = true;
debouncing_time = timer_read(); debouncing_time = timer_read();
PORTD ^= (1 << 2);
} }
# else # else

View file

@ -153,7 +153,6 @@ uint8_t _matrix_scan(void)
if (matrix_changed) { if (matrix_changed) {
debouncing = true; debouncing = true;
debouncing_time = timer_read(); debouncing_time = timer_read();
PORTD ^= (1 << 2);
} }
# else # else

View file

@ -157,7 +157,6 @@ uint8_t _matrix_scan(void)
if (matrix_changed) { if (matrix_changed) {
debouncing = true; debouncing = true;
debouncing_time = timer_read(); debouncing_time = timer_read();
PORTD ^= (1 << 2);
} }
# else # else

View file

@ -153,7 +153,6 @@ uint8_t _matrix_scan(void)
if (matrix_changed) { if (matrix_changed) {
debouncing = true; debouncing = true;
debouncing_time = timer_read(); debouncing_time = timer_read();
PORTD ^= (1 << 2);
} }
# else # else

View file

@ -36,6 +36,7 @@ enum custom_keycodes {
#define KC_X2 RAISE #define KC_X2 RAISE
#define KC_X3 LT(_FN3, KC_GRV) #define KC_X3 LT(_FN3, KC_GRV)
#define KC_X4 MT(MOD_LSFT, KC_ENT) #define KC_X4 MT(MOD_LSFT, KC_ENT)
#define KC_BL_S BL_STEP
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
@ -91,7 +92,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//|----+----+----+----+----+----| |----+----+----+----+----+----| //|----+----+----+----+----+----| |----+----+----+----+----+----|
,CPYP, , ,DOWN,LCBR, RCBR, P1 , P2 , P3 ,MINS, , ,CPYP, , ,DOWN,LCBR, RCBR, P1 , P2 , P3 ,MINS, ,
//|----+----+----+----+----+----| |----+----+----+----+----+----| //|----+----+----+----+----+----| |----+----+----+----+----+----|
, , , , , , DEL , , P0 ,PDOT, , BL_S, , , , , , DEL , , P0 ,PDOT, ,
//`----+----+----+----+----+----' `----+----+----+----+----+----' //`----+----+----+----+----+----' `----+----+----+----+----+----'
), ),

View file

@ -1,5 +1,5 @@
/* /*
Copyright 2017 Danny Nguyen <danny@hexwire.com> Copyright 2017 Danny Nguyen <danny@keeb.io>
This program is free software: you can redistribute it and/or modify This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by it under the terms of the GNU General Public License as published by
@ -31,6 +31,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "config.h" #include "config.h"
#include "timer.h" #include "timer.h"
#ifdef BACKLIGHT_ENABLE
#include "backlight.h"
extern backlight_config_t backlight_config;
#endif
#ifdef USE_I2C #ifdef USE_I2C
# include "i2c.h" # include "i2c.h"
#else // USE_SERIAL #else // USE_SERIAL
@ -58,6 +63,8 @@ static matrix_row_t matrix_debouncing[MATRIX_ROWS];
#define ERROR_DISCONNECT_COUNT 5 #define ERROR_DISCONNECT_COUNT 5
#define SERIAL_LED_ADDR 0x00
#define ROWS_PER_HAND (MATRIX_ROWS/2) #define ROWS_PER_HAND (MATRIX_ROWS/2)
static uint8_t error_count = 0; static uint8_t error_count = 0;
@ -115,12 +122,23 @@ uint8_t matrix_cols(void)
void matrix_init(void) void matrix_init(void)
{ {
#ifdef DISABLE_JTAG
// JTAG disable for PORT F. write JTD bit twice within four cycles.
MCUCR |= (1<<JTD);
MCUCR |= (1<<JTD);
#endif
debug_enable = true; debug_enable = true;
debug_matrix = true; debug_matrix = true;
debug_mouse = true; debug_mouse = true;
// initialize row and col // initialize row and col
#if (DIODE_DIRECTION == COL2ROW)
unselect_rows(); unselect_rows();
init_cols(); init_cols();
#elif (DIODE_DIRECTION == ROW2COL)
unselect_cols();
init_rows();
#endif
TX_RX_LED_INIT; TX_RX_LED_INIT;
@ -146,7 +164,6 @@ uint8_t _matrix_scan(void)
if (matrix_changed) { if (matrix_changed) {
debouncing = true; debouncing = true;
debouncing_time = timer_read(); debouncing_time = timer_read();
PORTD ^= (1 << 2);
} }
# else # else
@ -196,6 +213,15 @@ int i2c_transaction(void) {
err = i2c_master_write(0x00); err = i2c_master_write(0x00);
if (err) goto i2c_error; if (err) goto i2c_error;
#ifdef BACKLIGHT_ENABLE
// Write backlight level for slave to read
err = i2c_master_write(backlight_config.enable ? backlight_config.level : 0);
#else
// Write zero, so our byte index is the same
err = i2c_master_write(0x00);
#endif
if (err) goto i2c_error;
// Start read // Start read
err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
if (err) goto i2c_error; if (err) goto i2c_error;
@ -228,6 +254,11 @@ int serial_transaction(void) {
for (int i = 0; i < ROWS_PER_HAND; ++i) { for (int i = 0; i < ROWS_PER_HAND; ++i) {
matrix[slaveOffset+i] = serial_slave_buffer[i]; matrix[slaveOffset+i] = serial_slave_buffer[i];
} }
#ifdef BACKLIGHT_ENABLE
// Write backlight level for slave to read
serial_master_buffer[SERIAL_LED_ADDR] = backlight_config.enable ? backlight_config.level : 0;
#endif
return 0; return 0;
} }
#endif #endif
@ -268,19 +299,30 @@ void matrix_slave_scan(void) {
int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
#ifdef USE_I2C #ifdef USE_I2C
#ifdef BACKLIGHT_ENABLE
// Read backlight level sent from master and update level on slave
backlight_set(i2c_slave_buffer[0]);
#endif
for (int i = 0; i < ROWS_PER_HAND; ++i) { for (int i = 0; i < ROWS_PER_HAND; ++i) {
i2c_slave_buffer[i] = matrix[offset+i]; i2c_slave_buffer[i+1] = matrix[offset+i];
} }
#else // USE_SERIAL #else // USE_SERIAL
for (int i = 0; i < ROWS_PER_HAND; ++i) { for (int i = 0; i < ROWS_PER_HAND; ++i) {
serial_slave_buffer[i] = matrix[offset+i]; serial_slave_buffer[i] = matrix[offset+i];
} }
#ifdef BACKLIGHT_ENABLE
// Read backlight level sent from master and update level on slave
backlight_set(serial_master_buffer[SERIAL_LED_ADDR]);
#endif
#endif #endif
} }
bool matrix_is_modified(void) bool matrix_is_modified(void)
{ {
#if (DEBOUNCING_DELAY > 0)
if (debouncing) return false; if (debouncing) return false;
#endif
return true; return true;
} }

View file

@ -58,13 +58,13 @@ EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400) CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6 AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
USE_I2C = yes USE_I2C = yes
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
@ -72,4 +72,4 @@ CUSTOM_MATRIX = yes
LAYOUTS = ortho_5x12 LAYOUTS = ortho_5x12
DEFAULT_FOLDER = nyquist/rev1 DEFAULT_FOLDER = nyquist/rev2

View file

@ -146,7 +146,6 @@ uint8_t _matrix_scan(void)
if (matrix_changed) { if (matrix_changed) {
debouncing = true; debouncing = true;
debouncing_time = timer_read(); debouncing_time = timer_read();
PORTD ^= (1 << 2);
} }
# else # else

View file

@ -198,7 +198,6 @@ uint8_t _matrix_scan(void)
if (matrix_changed) { if (matrix_changed) {
debouncing = true; debouncing = true;
debouncing_time = timer_read(); debouncing_time = timer_read();
PORTD ^= (1 << 2);
} }
# else # else

View file

@ -146,7 +146,6 @@ uint8_t _matrix_scan(void)
if (matrix_changed) { if (matrix_changed) {
debouncing = true; debouncing = true;
debouncing_time = timer_read(); debouncing_time = timer_read();
PORTD ^= (1 << 2);
} }
# else # else

View file

@ -148,7 +148,6 @@ uint8_t _matrix_scan(void)
if (matrix_changed) { if (matrix_changed) {
debouncing = true; debouncing = true;
debouncing_time = timer_read(); debouncing_time = timer_read();
PORTD ^= (1 << 2);
} }
# else # else