From 2bbbfc61543053f297e38fd070d8b18ee380bff5 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Fri, 12 Jul 2019 05:04:22 +1000 Subject: [PATCH] [Keyboard] Update Felix keyboard (#6306) --- keyboards/felix/config.h | 220 +++++++++++++++++++++-- keyboards/felix/felix.h | 5 +- keyboards/felix/info.json | 23 ++- keyboards/felix/keymaps/default/keymap.c | 25 +-- keyboards/felix/readme.md | 2 +- keyboards/felix/rules.mk | 38 ++-- 6 files changed, 258 insertions(+), 55 deletions(-) diff --git a/keyboards/felix/config.h b/keyboards/felix/config.h index 0dd8eea07c..19a5247d27 100644 --- a/keyboards/felix/config.h +++ b/keyboards/felix/config.h @@ -1,5 +1,4 @@ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once #include "config_common.h" @@ -9,40 +8,225 @@ #define DEVICE_VER 0x0001 #define MANUFACTURER Unikeyboard #define PRODUCT Felix -#define DESCRIPTION 4x5 number/macropad. +#define DESCRIPTION 4x5 number/macropad /* key matrix size */ #define MATRIX_ROWS 5 #define MATRIX_COLS 4 -/* key matrix pins */ +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ #define MATRIX_ROW_PINS { B2, B3, B1, F7, F6 } #define MATRIX_COL_PINS { B5, B4, E6, D7 } #define UNUSED_PINS -/* COL2ROW or ROW2COL */ +/* COL2ROW, ROW2COL */ #define DIODE_DIRECTION ROW2COL -/* number of backlight levels */ -/* Not sure what pin controls the backlighting, need help for this. */ -#define BACKLIGHT_PIN -#define BACKLIGHT_LEVELS 5 +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 -/* Set 0 if debouncing isn't needed */ +#define BACKLIGHT_PIN C6 +#define BACKLIGHT_LEVELS 5 +//#define BACKLIGHT_BREATHING + +// #define RGB_DI_PIN E2 +// #ifdef RGB_DI_PIN +// #define RGBLED_NUM 16 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE - /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* there is no rgb underglow by default. */ -#define RGB_DI_PIN -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 16 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* + * HD44780 LCD Display Configuration + */ +/* +#define LCD_LINES 2 //< number of visible lines of the display +#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display + +#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode + +#if LCD_IO_MODE +#define LCD_PORT PORTB //< port for the LCD lines +#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 +#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 +#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 +#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 +#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 +#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 +#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 +#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 +#define LCD_RS_PORT LCD_PORT //< port for RS line +#define LCD_RS_PIN 3 //< pin for RS line +#define LCD_RW_PORT LCD_PORT //< port for RW line +#define LCD_RW_PIN 2 //< pin for RW line +#define LCD_E_PORT LCD_PORT //< port for Enable line +#define LCD_E_PIN 1 //< pin for Enable line #endif +*/ + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/felix/felix.h b/keyboards/felix/felix.h index 86a9b4e72e..f43a586c8e 100644 --- a/keyboards/felix/felix.h +++ b/keyboards/felix/felix.h @@ -1,5 +1,4 @@ -#ifndef FELIX_H -#define FELIX_H +#pragma once #include "quantum.h" @@ -18,5 +17,3 @@ } #define LAYOUT LAYOUT_ortho_5x4 - -#endif \ No newline at end of file diff --git a/keyboards/felix/info.json b/keyboards/felix/info.json index a9b3c3dd0e..3b1cfda2f3 100644 --- a/keyboards/felix/info.json +++ b/keyboards/felix/info.json @@ -6,7 +6,28 @@ "height": 5, "layouts": { "LAYOUT_ortho_5x4": { - "layout": [{"label":"K000", "x":0, "y":0}, {"label":"K001", "x":1, "y":0}, {"label":"K002", "x":2, "y":0}, {"label":"K003", "x":3, "y":0}, {"label":"K100", "x":0, "y":1}, {"label":"K101", "x":1, "y":1}, {"label":"K102", "x":2, "y":1}, {"label":"K103", "x":3, "y":1}, {"label":"K200", "x":0, "y":2}, {"label":"K201", "x":1, "y":2}, {"label":"K202", "x":2, "y":2}, {"label":"K203", "x":3, "y":2}, {"label":"K300", "x":0, "y":3}, {"label":"K301", "x":1, "y":3}, {"label":"K302", "x":2, "y":3}, {"label":"K303", "x":3, "y":3}, {"label":"K400", "x":0, "y":4}, {"label":"K401", "x":1, "y":4}, {"label":"K402", "x":2, "y":4}, {"label":"K403", "x":3, "y":4}] + "layout": [ + {"label":"K000", "x":0, "y":0}, + {"label":"K001", "x":1, "y":0}, + {"label":"K002", "x":2, "y":0}, + {"label":"K003", "x":3, "y":0}, + {"label":"K100", "x":0, "y":1}, + {"label":"K101", "x":1, "y":1}, + {"label":"K102", "x":2, "y":1}, + {"label":"K103", "x":3, "y":1}, + {"label":"K200", "x":0, "y":2}, + {"label":"K201", "x":1, "y":2}, + {"label":"K202", "x":2, "y":2}, + {"label":"K203", "x":3, "y":2}, + {"label":"K300", "x":0, "y":3}, + {"label":"K301", "x":1, "y":3}, + {"label":"K302", "x":2, "y":3}, + {"label":"K303", "x":3, "y":3}, + {"label":"K400", "x":0, "y":4}, + {"label":"K401", "x":1, "y":4}, + {"label":"K402", "x":2, "y":4}, + {"label":"K403", "x":3, "y":4} + ] } } } diff --git a/keyboards/felix/keymaps/default/keymap.c b/keyboards/felix/keymaps/default/keymap.c index a0093bf8e4..630a46c086 100644 --- a/keyboards/felix/keymaps/default/keymap.c +++ b/keyboards/felix/keymaps/default/keymap.c @@ -1,22 +1,11 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - LAYOUT( - KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, - KC_P7, KC_P8, KC_P9, KC_PPLS, - KC_P4, KC_P5, KC_P6, KC_HOME, - KC_P1, KC_P2, KC_P3, KC_END, - KC_P0, KC_PEQL, KC_PDOT, KC_PENT - ), - + LAYOUT_ortho_5x4( + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_P4, KC_P5, KC_P6, KC_HOME, + KC_P1, KC_P2, KC_P3, KC_END, + KC_P0, KC_PEQL, KC_PDOT, KC_PENT + ) }; - -void persistant_default_layer_set(uint16_t default_layer) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - } - return true; -} diff --git a/keyboards/felix/readme.md b/keyboards/felix/readme.md index d671b0c01c..0a3fe10a6e 100644 --- a/keyboards/felix/readme.md +++ b/keyboards/felix/readme.md @@ -10,4 +10,4 @@ Make example for this keyboard (after setting up your build environment): make felix:default -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/felix/rules.mk b/keyboards/felix/rules.mk index e8f8343416..b33785b64a 100644 --- a/keyboards/felix/rules.mk +++ b/keyboards/felix/rules.mk @@ -37,22 +37,34 @@ F_USB = $(F_CPU) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT -# Boot Section Size in *bytes* -OPT_DEFS += -DBOOTLOADER_SIZE=4096 +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = caterina # Build Options -# comment out to disable the options. +# change yes to no to disable # -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no -RGBLIGHT_ENABLE = no +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) LAYOUTS = ortho_5x4