1
0
Fork 0

Tada68 instructions, updated and clarified to avoid bricking keyboards

This commit is contained in:
Gareth Pye 2017-10-13 21:54:37 +11:00 committed by Jack Humbert
parent 4c0ff7b7ea
commit 2cf697d0c8

View file

@ -15,15 +15,17 @@ See [build environment setup](https://docs.qmk.fm/build_environment_setup.html)
## Flashing Instructions ## Flashing Instructions
1) from the `qmk_firmware` directory run: *Read all the instructions, there are a few warnings of things to avoid doing to avoid bricking your Tada68. _It is much too easy to do! _
1) from the `qmk_firmware\` directory run:
``` ```
$ make tada68-default-bin $ make tada68-default-flashbin
``` ```
2) hit the reset button on the TADA, the lights will start flashing. 2) Connect your keyboard to Windows computer, hit the reset button on the TADA, the lights will start flashing.
3) You'll see a new drive on your computer called TADA68. Backup the original factory `FLASH.BIN` file thats inside it. 3) You'll see a new drive on your computer called TADA68. Backup the original factory `FLASH.BIN` file thats inside it.
4) Delete `FLASH.BIN` from the TADA drive and copy `tada68_default.bin` that was generated at the root of the qmk directory into the TADA drive. 4) Delete `FLASH.BIN` from the TADA drive and copy `tada68_default.bin` that was generated at the root of the qmk directory into the TADA drive.
5) Hit ESC on the keyboard. The lights will stop flashing and your firmware is loaded! 5) *Do not eject the USB device.* Hit ESC on the keyboard. The lights will stop flashing and your firmware is loaded!