commit
2d90374912
25
keyboard/Bantam44/Bantam44.c
Normal file
25
keyboard/Bantam44/Bantam44.c
Normal file
|
@ -0,0 +1,25 @@
|
||||||
|
#include "Bantam44.h"
|
||||||
|
|
||||||
|
__attribute__ ((weak))
|
||||||
|
void matrix_init_user(void) {
|
||||||
|
// leave these blank
|
||||||
|
}
|
||||||
|
|
||||||
|
__attribute__ ((weak))
|
||||||
|
void matrix_scan_user(void) {
|
||||||
|
// leave these blank
|
||||||
|
}
|
||||||
|
|
||||||
|
void matrix_init_kb(void) {
|
||||||
|
// put your keyboard start-up code here
|
||||||
|
// runs once when the firmware starts up
|
||||||
|
|
||||||
|
matrix_init_user();
|
||||||
|
}
|
||||||
|
|
||||||
|
void matrix_scan_kb(void) {
|
||||||
|
// put your looping keyboard code here
|
||||||
|
// runs every cycle (a lot)
|
||||||
|
|
||||||
|
matrix_scan_user();
|
||||||
|
}
|
29
keyboard/Bantam44/Bantam44.h
Normal file
29
keyboard/Bantam44/Bantam44.h
Normal file
|
@ -0,0 +1,29 @@
|
||||||
|
#ifndef BANTAM44_H
|
||||||
|
#define BANTAM44_H
|
||||||
|
|
||||||
|
#include "matrix.h"
|
||||||
|
#include "keymap_common.h"
|
||||||
|
#include "backlight.h"
|
||||||
|
#include <stddef.h>
|
||||||
|
|
||||||
|
// This a shortcut to help you visually see your layout.
|
||||||
|
// The following is an example using the Planck MIT layout
|
||||||
|
// The first section contains all of the arguements
|
||||||
|
// The second converts the arguments into a two-dimensional array
|
||||||
|
#define KEYMAP( \
|
||||||
|
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
|
||||||
|
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \
|
||||||
|
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
|
||||||
|
K30, K31, K32, K33, K34, K35, K36, K37, K38 \
|
||||||
|
) \
|
||||||
|
{ \
|
||||||
|
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B }, \
|
||||||
|
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, KC_NO, K2A }, \
|
||||||
|
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B }, \
|
||||||
|
{ K30, K31, K32, KC_NO, K33, KC_NO, K34, KC_NO, K35, K36, K37, K38 }, \
|
||||||
|
}
|
||||||
|
|
||||||
|
void matrix_init_user(void);
|
||||||
|
void matrix_scan_user(void);
|
||||||
|
|
||||||
|
#endif
|
139
keyboard/Bantam44/Makefile
Normal file
139
keyboard/Bantam44/Makefile
Normal file
|
@ -0,0 +1,139 @@
|
||||||
|
#----------------------------------------------------------------------------
|
||||||
|
# On command line:
|
||||||
|
#
|
||||||
|
# make all = Make software.
|
||||||
|
#
|
||||||
|
# make clean = Clean out built project files.
|
||||||
|
#
|
||||||
|
# make coff = Convert ELF to AVR COFF.
|
||||||
|
#
|
||||||
|
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||||
|
#
|
||||||
|
# make program = Download the hex file to the device.
|
||||||
|
# Please customize your programmer settings(PROGRAM_CMD)
|
||||||
|
#
|
||||||
|
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||||
|
# (must have teensy_loader_cli installed).
|
||||||
|
#
|
||||||
|
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||||
|
# have dfu-programmer installed).
|
||||||
|
#
|
||||||
|
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||||
|
# have Atmel FLIP installed).
|
||||||
|
#
|
||||||
|
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||||
|
# (must have dfu-programmer installed).
|
||||||
|
#
|
||||||
|
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||||
|
# (must have Atmel FLIP installed).
|
||||||
|
#
|
||||||
|
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||||
|
# with avr-gdb or avr-insight as the front end for debugging.
|
||||||
|
#
|
||||||
|
# make filename.s = Just compile filename.c into the assembler code only.
|
||||||
|
#
|
||||||
|
# make filename.i = Create a preprocessed source file for use in submitting
|
||||||
|
# bug reports to the GCC project.
|
||||||
|
#
|
||||||
|
# To rebuild project do "make clean" then "make all".
|
||||||
|
#----------------------------------------------------------------------------
|
||||||
|
|
||||||
|
# Target file name (without extension).
|
||||||
|
TARGET = Bantam44
|
||||||
|
|
||||||
|
|
||||||
|
# Directory common source filess exist
|
||||||
|
TOP_DIR = ../..
|
||||||
|
TMK_DIR = ../../tmk_core
|
||||||
|
|
||||||
|
# Directory keyboard dependent files exist
|
||||||
|
TARGET_DIR = .
|
||||||
|
|
||||||
|
# # project specific files
|
||||||
|
SRC = Bantam44.c
|
||||||
|
|
||||||
|
ifdef KEYMAP
|
||||||
|
SRC := keymaps/$(KEYMAP).c $(SRC)
|
||||||
|
else
|
||||||
|
SRC := keymaps/default.c $(SRC)
|
||||||
|
endif
|
||||||
|
|
||||||
|
CONFIG_H = config.h
|
||||||
|
|
||||||
|
# MCU name
|
||||||
|
#MCU = at90usb1287
|
||||||
|
MCU = atmega32u4
|
||||||
|
|
||||||
|
# Processor frequency.
|
||||||
|
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||||
|
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||||
|
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||||
|
# automatically to create a 32-bit value in your source code.
|
||||||
|
#
|
||||||
|
# This will be an integer division of F_USB below, as it is sourced by
|
||||||
|
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||||
|
# does not *change* the processor frequency - it should merely be updated to
|
||||||
|
# reflect the processor speed set externally so that the code can use accurate
|
||||||
|
# software delays.
|
||||||
|
F_CPU = 16000000
|
||||||
|
|
||||||
|
|
||||||
|
#
|
||||||
|
# LUFA specific
|
||||||
|
#
|
||||||
|
# Target architecture (see library "Board Types" documentation).
|
||||||
|
ARCH = AVR8
|
||||||
|
|
||||||
|
# Input clock frequency.
|
||||||
|
# This will define a symbol, F_USB, in all source code files equal to the
|
||||||
|
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||||
|
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||||
|
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||||
|
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||||
|
# at the end, this will be done automatically to create a 32-bit value in your
|
||||||
|
# source code.
|
||||||
|
#
|
||||||
|
# If no clock division is performed on the input clock inside the AVR (via the
|
||||||
|
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||||
|
F_USB = $(F_CPU)
|
||||||
|
|
||||||
|
# Interrupt driven control endpoint task(+60)
|
||||||
|
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||||
|
|
||||||
|
|
||||||
|
# Boot Section Size in *bytes*
|
||||||
|
# Teensy halfKay 512
|
||||||
|
# Teensy++ halfKay 1024
|
||||||
|
# Atmel DFU loader 4096
|
||||||
|
# LUFA bootloader 4096
|
||||||
|
# USBaspLoader 2048
|
||||||
|
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||||
|
|
||||||
|
|
||||||
|
# Build Options
|
||||||
|
# comment out to disable the options.
|
||||||
|
#
|
||||||
|
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||||
|
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||||
|
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||||
|
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||||
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
|
# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||||
|
# NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||||
|
# MIDI_ENABLE = YES # MIDI controls
|
||||||
|
# UNICODE_ENABLE = YES # Unicode
|
||||||
|
# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
|
|
||||||
|
|
||||||
|
# Optimize size but this may cause error "relocation truncated to fit"
|
||||||
|
#EXTRALDFLAGS = -Wl,--relax
|
||||||
|
|
||||||
|
# Search Path
|
||||||
|
VPATH += $(TARGET_DIR)
|
||||||
|
VPATH += $(TOP_DIR)
|
||||||
|
VPATH += $(TMK_DIR)
|
||||||
|
|
||||||
|
include $(TOP_DIR)/quantum/quantum.mk
|
||||||
|
|
24
keyboard/Bantam44/README.md
Normal file
24
keyboard/Bantam44/README.md
Normal file
|
@ -0,0 +1,24 @@
|
||||||
|
Bantam44 keyboard firmware
|
||||||
|
======================
|
||||||
|
|
||||||
|
## Quantum MK Firmware
|
||||||
|
|
||||||
|
For the full Quantum feature list, see [the parent README.md](/README.md).
|
||||||
|
|
||||||
|
## Building
|
||||||
|
|
||||||
|
Download or clone the whole firmware and navigate to the keyboard/Bantam44 folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
|
||||||
|
|
||||||
|
Depending on which keymap you would like to use, you will have to compile slightly differently.
|
||||||
|
|
||||||
|
### Default
|
||||||
|
To build with the default keymap, simply run `make`.
|
||||||
|
|
||||||
|
### Other Keymaps
|
||||||
|
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` and see keymap document (you can find in top README.md) and existent keymap files.
|
||||||
|
|
||||||
|
To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:
|
||||||
|
```
|
||||||
|
$ make KEYMAP=[default|jack|<name>]
|
||||||
|
```
|
||||||
|
Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
|
81
keyboard/Bantam44/config.h
Normal file
81
keyboard/Bantam44/config.h
Normal file
|
@ -0,0 +1,81 @@
|
||||||
|
/*
|
||||||
|
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 2 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef CONFIG_H
|
||||||
|
#define CONFIG_H
|
||||||
|
|
||||||
|
#include "config_common.h"
|
||||||
|
|
||||||
|
/* USB Device descriptor parameter */
|
||||||
|
#define VENDOR_ID 0xFEED
|
||||||
|
#define PRODUCT_ID 0x6060
|
||||||
|
#define DEVICE_VER 0x0001
|
||||||
|
#define MANUFACTURER Bantam Keyboards
|
||||||
|
#define PRODUCT Bantam44
|
||||||
|
#define DESCRIPTION A custom keyboard
|
||||||
|
|
||||||
|
/* key matrix size */
|
||||||
|
#define MATRIX_ROWS 4
|
||||||
|
#define MATRIX_COLS 12
|
||||||
|
|
||||||
|
// Planck PCB default pin-out
|
||||||
|
// Change this to how you wired your keyboard
|
||||||
|
// COLS: Left to right, ROWS: Top to bottom
|
||||||
|
#define COLS (int []){ B0, B1, B2, B3, B7, D0, B6, F7, F6, F5, F4, F1 }
|
||||||
|
#define ROWS (int []){ F0, D6, D4, D5 }
|
||||||
|
|
||||||
|
/* COL2ROW or ROW2COL */
|
||||||
|
#define DIODE_DIRECTION COL2ROW
|
||||||
|
|
||||||
|
/* define if matrix has ghost */
|
||||||
|
//#define MATRIX_HAS_GHOST
|
||||||
|
|
||||||
|
/* number of backlight levels */
|
||||||
|
#define BACKLIGHT_LEVELS 3
|
||||||
|
|
||||||
|
/* Set 0 if debouncing isn't needed */
|
||||||
|
#define DEBOUNCE 5
|
||||||
|
|
||||||
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||||
|
#define LOCKING_SUPPORT_ENABLE
|
||||||
|
/* Locking resynchronize hack */
|
||||||
|
#define LOCKING_RESYNC_ENABLE
|
||||||
|
|
||||||
|
/* key combination for command */
|
||||||
|
#define IS_COMMAND() ( \
|
||||||
|
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||||
|
)
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Feature disable options
|
||||||
|
* These options are also useful to firmware size reduction.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* disable debug print */
|
||||||
|
//#define NO_DEBUG
|
||||||
|
|
||||||
|
/* disable print */
|
||||||
|
//#define NO_PRINT
|
||||||
|
|
||||||
|
/* disable action features */
|
||||||
|
//#define NO_ACTION_LAYER
|
||||||
|
//#define NO_ACTION_TAPPING
|
||||||
|
//#define NO_ACTION_ONESHOT
|
||||||
|
//#define NO_ACTION_MACRO
|
||||||
|
//#define NO_ACTION_FUNCTION
|
||||||
|
|
||||||
|
#endif
|
30
keyboard/Bantam44/keymaps/default.c
Normal file
30
keyboard/Bantam44/keymaps/default.c
Normal file
|
@ -0,0 +1,30 @@
|
||||||
|
#include "Bantam44.h"
|
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||||
|
[0] = { /* Base */
|
||||||
|
{KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC },
|
||||||
|
{KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_NO, KC_ENT },
|
||||||
|
{KC_CAPS, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT },
|
||||||
|
{KC_LCTL, KC_LGUI, KC_LALT, KC_NO, MO(1), KC_NO, KC_SPC, KC_NO, MO(2), KC_SCLN, KC_QUOT, KC_SLSH }
|
||||||
|
},
|
||||||
|
[1] = { /* LOWER */
|
||||||
|
{KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DELT },
|
||||||
|
{KC_TAB, KC_MPRV, KC_MPLY, KC_MNXT, KC_GRV, KC_BSLS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_NO, KC_ENT },
|
||||||
|
{KC_CAPS, KC_LSFT, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_NO, KC_HOME, KC_PGUP, KC_RSFT },
|
||||||
|
{KC_LCTL, KC_LGUI, KC_LALT, KC_NO, KC_TRNS, KC_NO, KC_SPC, KC_NO, KC_TRNS, KC_END, KC_PGDN, KC_EXLM }
|
||||||
|
},
|
||||||
|
[2] = { /* RAISE */
|
||||||
|
{KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DELT },
|
||||||
|
{KC_TAB, KC_MUTE, KC_VOLD, KC_VOLU, KC_TILD, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_NO, KC_ENT },
|
||||||
|
{KC_CAPS, KC_LSFT, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_NO, KC_UP, KC_RSFT },
|
||||||
|
{KC_LCTL, KC_LGUI, KC_LALT, KC_NO, KC_TRNS, KC_NO, KC_SPC, KC_NO, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT }
|
||||||
|
}
|
||||||
|
};
|
||||||
|
|
||||||
|
const uint16_t PROGMEM fn_actions[] = {
|
||||||
|
};
|
||||||
|
|
||||||
|
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // MACRODOWN only works in this function
|
||||||
|
{
|
||||||
|
return MACRO_NONE;
|
||||||
|
};
|
|
@ -1,16 +1,16 @@
|
||||||
#include "atomic.h"
|
#include "atomic.h"
|
||||||
|
|
||||||
__attribute__ ((weak))
|
__attribute__ ((weak))
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
// leave these blank
|
// leave these blank
|
||||||
};
|
}
|
||||||
|
|
||||||
__attribute__ ((weak))
|
__attribute__ ((weak))
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
// leave these blank
|
// leave these blank
|
||||||
};
|
}
|
||||||
|
|
||||||
void * matrix_init_kb(void) {
|
void matrix_init_kb(void) {
|
||||||
// put your keyboard start-up code here
|
// put your keyboard start-up code here
|
||||||
// runs once when the firmware starts up
|
// runs once when the firmware starts up
|
||||||
|
|
||||||
|
@ -25,16 +25,12 @@ void * matrix_init_kb(void) {
|
||||||
DDRE |= (1<<6);
|
DDRE |= (1<<6);
|
||||||
PORTE |= (1<<6);
|
PORTE |= (1<<6);
|
||||||
|
|
||||||
if (matrix_init_user) {
|
matrix_init_user();
|
||||||
(*matrix_init_user)();
|
}
|
||||||
}
|
|
||||||
};
|
|
||||||
|
|
||||||
void * matrix_scan_kb(void) {
|
void matrix_scan_kb(void) {
|
||||||
// put your looping keyboard code here
|
// put your looping keyboard code here
|
||||||
// runs every cycle (a lot)
|
// runs every cycle (a lot)
|
||||||
|
|
||||||
if (matrix_scan_user) {
|
matrix_scan_user();
|
||||||
(*matrix_scan_user)();
|
}
|
||||||
}
|
|
||||||
};
|
|
|
@ -24,7 +24,7 @@
|
||||||
{ K40, K41, KC_NO, K43, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, K4E } \
|
{ K40, K41, KC_NO, K43, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, K4E } \
|
||||||
}
|
}
|
||||||
|
|
||||||
void * matrix_init_user(void);
|
void matrix_init_user(void);
|
||||||
void * matrix_scan_user(void);
|
void matrix_scan_user(void);
|
||||||
|
|
||||||
#endif
|
#endif
|
|
@ -1,16 +1,16 @@
|
||||||
#include "atreus.h"
|
#include "atreus.h"
|
||||||
|
|
||||||
__attribute__ ((weak))
|
__attribute__ ((weak))
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
// leave these blank
|
// leave these blank
|
||||||
};
|
};
|
||||||
|
|
||||||
__attribute__ ((weak))
|
__attribute__ ((weak))
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
// leave these blank
|
// leave these blank
|
||||||
};
|
};
|
||||||
|
|
||||||
void * matrix_init_kb(void) {
|
void matrix_init_kb(void) {
|
||||||
// put your keyboard start-up code here
|
// put your keyboard start-up code here
|
||||||
// runs once when the firmware starts up
|
// runs once when the firmware starts up
|
||||||
|
|
||||||
|
@ -19,7 +19,7 @@ void * matrix_init_kb(void) {
|
||||||
}
|
}
|
||||||
};
|
};
|
||||||
|
|
||||||
void * matrix_scan_kb(void) {
|
void matrix_scan_kb(void) {
|
||||||
// put your looping keyboard code here
|
// put your looping keyboard code here
|
||||||
// runs every cycle (a lot)
|
// runs every cycle (a lot)
|
||||||
|
|
||||||
|
|
|
@ -22,7 +22,7 @@
|
||||||
{ k2a, k30, k31, k32, k33, k34, k36, k37, k38, k39, k3a } \
|
{ k2a, k30, k31, k32, k33, k34, k36, k37, k38, k39, k3a } \
|
||||||
}
|
}
|
||||||
|
|
||||||
void * matrix_init_user(void);
|
void matrix_init_user(void);
|
||||||
void * matrix_scan_user(void);
|
void matrix_scan_user(void);
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|
19
keyboard/ergodox_ez/190hotfix.sh
Executable file
19
keyboard/ergodox_ez/190hotfix.sh
Executable file
|
@ -0,0 +1,19 @@
|
||||||
|
#!/bin/bash
|
||||||
|
#a tool to fix broken keymaps as a result of pull request #190
|
||||||
|
#changing the declaration of matrix_scan_user() and matrix_init_user()
|
||||||
|
#
|
||||||
|
#This script will save a copy of the specified keymap as keymap.c.bak
|
||||||
|
#and then create a new keymap.c with the definion corrected.
|
||||||
|
#this script must be run from the ergodox_ez directory
|
||||||
|
if [ $# -ne 1 ]; then
|
||||||
|
echo $0: usage: ./190hotfix keymap_name
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
echo Saving backup as ./keymaps/$1/keymap.c.bak ...
|
||||||
|
mv ./keymaps/$1/keymap.c ./keymaps/$1/keymap.c.bak
|
||||||
|
|
||||||
|
echo Modifying ./keymaps/$1/keymap.c ...
|
||||||
|
cat ./keymaps/$1/keymap.c.bak | sed -r 's/^void \* matrix_/void matrix_/'>./keymaps/$1/keymap.c
|
||||||
|
|
||||||
|
echo Complete!
|
|
@ -5,16 +5,16 @@ bool i2c_initialized = 0;
|
||||||
uint8_t mcp23018_status = 0x20;
|
uint8_t mcp23018_status = 0x20;
|
||||||
|
|
||||||
__attribute__ ((weak))
|
__attribute__ ((weak))
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
return NULL;
|
|
||||||
};
|
}
|
||||||
|
|
||||||
__attribute__ ((weak))
|
__attribute__ ((weak))
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
return NULL;
|
|
||||||
};
|
|
||||||
|
|
||||||
void * matrix_init_kb(void) {
|
}
|
||||||
|
|
||||||
|
void matrix_init_kb(void) {
|
||||||
// keyboard LEDs (see "PWM on ports OC1(A|B|C)" in "teensy-2-0.md")
|
// keyboard LEDs (see "PWM on ports OC1(A|B|C)" in "teensy-2-0.md")
|
||||||
TCCR1A = 0b10101001; // set and configure fast PWM
|
TCCR1A = 0b10101001; // set and configure fast PWM
|
||||||
TCCR1B = 0b00001001; // set and configure fast PWM
|
TCCR1B = 0b00001001; // set and configure fast PWM
|
||||||
|
@ -34,21 +34,12 @@ void * matrix_init_kb(void) {
|
||||||
|
|
||||||
ergodox_blink_all_leds();
|
ergodox_blink_all_leds();
|
||||||
|
|
||||||
if (matrix_init_user) {
|
matrix_init_user();
|
||||||
(*matrix_init_user)();
|
}
|
||||||
}
|
|
||||||
|
|
||||||
return NULL;
|
void matrix_scan_kb(void) {
|
||||||
};
|
matrix_scan_user();
|
||||||
|
}
|
||||||
void * matrix_scan_kb(void) {
|
|
||||||
|
|
||||||
if (matrix_scan_user) {
|
|
||||||
(*matrix_scan_user)();
|
|
||||||
}
|
|
||||||
|
|
||||||
return NULL;
|
|
||||||
};
|
|
||||||
|
|
||||||
|
|
||||||
void ergodox_blink_all_leds(void)
|
void ergodox_blink_all_leds(void)
|
||||||
|
|
|
@ -123,8 +123,8 @@ inline void ergodox_led_all_set(uint8_t n)
|
||||||
{ k0D, k1D, k2D, k3D, k4D, KC_NO } \
|
{ k0D, k1D, k2D, k3D, k4D, KC_NO } \
|
||||||
}
|
}
|
||||||
|
|
||||||
void * matrix_init_user(void);
|
void matrix_init_user(void);
|
||||||
void * matrix_scan_user(void);
|
void matrix_scan_user(void);
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
Binary file not shown.
|
@ -158,12 +158,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs just one time when the keyboard initializes.
|
// Runs just one time when the keyboard initializes.
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
|
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs constantly in the background, in a loop.
|
// Runs constantly in the background, in a loop.
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
|
|
||||||
uint8_t layer = biton32(layer_state);
|
uint8_t layer = biton32(layer_state);
|
||||||
|
|
||||||
|
|
Binary file not shown.
|
@ -243,12 +243,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
|
|
||||||
|
|
||||||
// Runs just one time when the keyboard initializes.
|
// Runs just one time when the keyboard initializes.
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
};
|
};
|
||||||
|
|
||||||
|
|
||||||
// Runs constantly in the background, in a loop.
|
// Runs constantly in the background, in a loop.
|
||||||
void * matrix_scan_user(void)
|
void matrix_scan_user(void)
|
||||||
{
|
{
|
||||||
uint8_t layer = biton32(layer_state);
|
uint8_t layer = biton32(layer_state);
|
||||||
|
|
||||||
|
|
Binary file not shown.
|
@ -155,12 +155,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs just one time when the keyboard initializes.
|
// Runs just one time when the keyboard initializes.
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
|
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs constantly in the background, in a loop.
|
// Runs constantly in the background, in a loop.
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
|
|
||||||
uint8_t layer = biton32(layer_state);
|
uint8_t layer = biton32(layer_state);
|
||||||
|
|
||||||
|
|
Binary file not shown.
Binary file not shown.
|
@ -210,12 +210,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs just one time when the keyboard initializes.
|
// Runs just one time when the keyboard initializes.
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
|
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs constantly in the background, in a loop.
|
// Runs constantly in the background, in a loop.
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
|
|
||||||
uint8_t layer = biton32(layer_state);
|
uint8_t layer = biton32(layer_state);
|
||||||
|
|
||||||
|
|
Binary file not shown.
|
@ -154,12 +154,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs just one time when the keyboard initializes.
|
// Runs just one time when the keyboard initializes.
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
return NULL;
|
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs constantly in the background, in a loop.
|
// Runs constantly in the background, in a loop.
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
/* leds is a static array holding the current brightness of each of the
|
/* leds is a static array holding the current brightness of each of the
|
||||||
* three keyboard LEDs. It's 4 long simply to avoid the ugliness of +1s and
|
* three keyboard LEDs. It's 4 long simply to avoid the ugliness of +1s and
|
||||||
* -1s in the code below, and because wasting a byte really doesn't matter
|
* -1s in the code below, and because wasting a byte really doesn't matter
|
||||||
|
@ -191,5 +191,5 @@ void * matrix_scan_user(void) {
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
return NULL;
|
|
||||||
};
|
};
|
||||||
|
|
Binary file not shown.
|
@ -155,12 +155,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs just one time when the keyboard initializes.
|
// Runs just one time when the keyboard initializes.
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
|
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs constantly in the background, in a loop.
|
// Runs constantly in the background, in a loop.
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
|
|
||||||
uint8_t layer = biton32(layer_state);
|
uint8_t layer = biton32(layer_state);
|
||||||
|
|
||||||
|
|
Binary file not shown.
|
@ -158,12 +158,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs just one time when the keyboard initializes.
|
// Runs just one time when the keyboard initializes.
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
|
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs constantly in the background, in a loop.
|
// Runs constantly in the background, in a loop.
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
|
|
||||||
uint8_t layer = biton32(layer_state);
|
uint8_t layer = biton32(layer_state);
|
||||||
|
|
||||||
|
|
Binary file not shown.
|
@ -200,12 +200,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs just one time when the keyboard initializes.
|
// Runs just one time when the keyboard initializes.
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
|
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs constantly in the background, in a loop.
|
// Runs constantly in the background, in a loop.
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
|
|
||||||
uint8_t layer = biton32(layer_state);
|
uint8_t layer = biton32(layer_state);
|
||||||
|
|
||||||
|
|
Binary file not shown.
|
@ -155,12 +155,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs just one time when the keyboard initializes.
|
// Runs just one time when the keyboard initializes.
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
|
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs constantly in the background, in a loop.
|
// Runs constantly in the background, in a loop.
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
|
|
||||||
uint8_t layer = biton32(layer_state);
|
uint8_t layer = biton32(layer_state);
|
||||||
|
|
||||||
|
|
Binary file not shown.
|
@ -155,12 +155,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs just one time when the keyboard initializes.
|
// Runs just one time when the keyboard initializes.
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
|
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs constantly in the background, in a loop.
|
// Runs constantly in the background, in a loop.
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
|
|
||||||
uint8_t layer = biton32(layer_state);
|
uint8_t layer = biton32(layer_state);
|
||||||
|
|
||||||
|
|
Binary file not shown.
|
@ -156,12 +156,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs just one time when the keyboard initializes.
|
// Runs just one time when the keyboard initializes.
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
|
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs constantly in the background, in a loop.
|
// Runs constantly in the background, in a loop.
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
|
|
||||||
uint8_t layer = biton32(layer_state);
|
uint8_t layer = biton32(layer_state);
|
||||||
|
|
||||||
|
|
Binary file not shown.
|
@ -182,12 +182,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs just one time when the keyboard initializes.
|
// Runs just one time when the keyboard initializes.
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
|
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs constantly in the background, in a loop.
|
// Runs constantly in the background, in a loop.
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
|
|
||||||
uint8_t layer = biton32(layer_state);
|
uint8_t layer = biton32(layer_state);
|
||||||
|
|
||||||
|
|
Binary file not shown.
|
@ -157,12 +157,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs just one time when the keyboard initializes.
|
// Runs just one time when the keyboard initializes.
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
|
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs constantly in the background, in a loop.
|
// Runs constantly in the background, in a loop.
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
|
|
||||||
uint8_t layer = biton32(layer_state);
|
uint8_t layer = biton32(layer_state);
|
||||||
|
|
||||||
|
|
Binary file not shown.
|
@ -157,12 +157,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs just one time when the keyboard initializes.
|
// Runs just one time when the keyboard initializes.
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
|
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs constantly in the background, in a loop.
|
// Runs constantly in the background, in a loop.
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
|
|
||||||
uint8_t layer = biton32(layer_state);
|
uint8_t layer = biton32(layer_state);
|
||||||
|
|
||||||
|
|
Binary file not shown.
|
@ -89,12 +89,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs just one time when the keyboard initializes.
|
// Runs just one time when the keyboard initializes.
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
|
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs constantly in the background, in a loop.
|
// Runs constantly in the background, in a loop.
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
|
|
||||||
uint8_t layer = biton32(layer_state);
|
uint8_t layer = biton32(layer_state);
|
||||||
|
|
||||||
|
|
Binary file not shown.
|
@ -244,12 +244,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs just one time when the keyboard initializes.
|
// Runs just one time when the keyboard initializes.
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
|
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs constantly in the background, in a loop.
|
// Runs constantly in the background, in a loop.
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
|
|
||||||
uint8_t layer = biton32(layer_state);
|
uint8_t layer = biton32(layer_state);
|
||||||
|
|
||||||
|
|
Binary file not shown.
|
@ -155,12 +155,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs just one time when the keyboard initializes.
|
// Runs just one time when the keyboard initializes.
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
|
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs constantly in the background, in a loop.
|
// Runs constantly in the background, in a loop.
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
|
|
||||||
uint8_t layer = biton32(layer_state);
|
uint8_t layer = biton32(layer_state);
|
||||||
|
|
||||||
|
|
Binary file not shown.
|
@ -155,12 +155,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs just one time when the keyboard initializes.
|
// Runs just one time when the keyboard initializes.
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
|
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs constantly in the background, in a loop.
|
// Runs constantly in the background, in a loop.
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
|
|
||||||
uint8_t layer = biton32(layer_state);
|
uint8_t layer = biton32(layer_state);
|
||||||
|
|
||||||
|
|
|
@ -155,12 +155,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs just one time when the keyboard initializes.
|
// Runs just one time when the keyboard initializes.
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
|
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs constantly in the background, in a loop.
|
// Runs constantly in the background, in a loop.
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
|
|
||||||
uint8_t layer = biton32(layer_state);
|
uint8_t layer = biton32(layer_state);
|
||||||
|
|
||||||
|
|
Binary file not shown.
|
@ -248,12 +248,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
}
|
}
|
||||||
|
|
||||||
// Runs just one time when the keyboard initializes.
|
// Runs just one time when the keyboard initializes.
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
return NULL;
|
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs constantly in the background, in a loop.
|
// Runs constantly in the background, in a loop.
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
|
|
||||||
uint8_t layer = biton32(layer_state);
|
uint8_t layer = biton32(layer_state);
|
||||||
|
|
||||||
|
|
Binary file not shown.
|
@ -161,12 +161,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs just one time when the keyboard initializes.
|
// Runs just one time when the keyboard initializes.
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
|
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs constantly in the background, in a loop.
|
// Runs constantly in the background, in a loop.
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
|
|
||||||
uint8_t layer = biton32(layer_state);
|
uint8_t layer = biton32(layer_state);
|
||||||
|
|
||||||
|
|
Binary file not shown.
|
@ -390,12 +390,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs just one time when the keyboard initializes.
|
// Runs just one time when the keyboard initializes.
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
|
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs constantly in the background, in a loop.
|
// Runs constantly in the background, in a loop.
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
|
|
||||||
uint8_t layer = biton32(layer_state);
|
uint8_t layer = biton32(layer_state);
|
||||||
|
|
||||||
|
|
Binary file not shown.
|
@ -227,12 +227,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs just one time when the keyboard initializes.
|
// Runs just one time when the keyboard initializes.
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
|
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs constantly in the background, in a loop.
|
// Runs constantly in the background, in a loop.
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
|
|
||||||
uint8_t layer = biton32(layer_state);
|
uint8_t layer = biton32(layer_state);
|
||||||
|
|
||||||
|
|
Binary file not shown.
|
@ -158,12 +158,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs just one time when the keyboard initializes.
|
// Runs just one time when the keyboard initializes.
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
|
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs constantly in the background, in a loop.
|
// Runs constantly in the background, in a loop.
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
|
|
||||||
uint8_t layer = biton32(layer_state);
|
uint8_t layer = biton32(layer_state);
|
||||||
|
|
||||||
|
|
Binary file not shown.
|
@ -162,12 +162,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs just one time when the keyboard initializes.
|
// Runs just one time when the keyboard initializes.
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
|
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs constantly in the background, in a loop.
|
// Runs constantly in the background, in a loop.
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
|
|
||||||
uint8_t layer = biton32(layer_state);
|
uint8_t layer = biton32(layer_state);
|
||||||
|
|
||||||
|
|
|
@ -199,12 +199,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs just one time when the keyboard initializes.
|
// Runs just one time when the keyboard initializes.
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
|
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs constantly in the background, in a loop.
|
// Runs constantly in the background, in a loop.
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
|
|
||||||
uint8_t layer = biton32(layer_state);
|
uint8_t layer = biton32(layer_state);
|
||||||
|
|
||||||
|
|
Binary file not shown.
|
@ -108,11 +108,11 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs just one time when the keyboard initializes.
|
// Runs just one time when the keyboard initializes.
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs constantly in the background, in a loop.
|
// Runs constantly in the background, in a loop.
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
uint8_t layer = biton32(layer_state);
|
uint8_t layer = biton32(layer_state);
|
||||||
ergodox_board_led_off();
|
ergodox_board_led_off();
|
||||||
ergodox_right_led_1_off();
|
ergodox_right_led_1_off();
|
||||||
|
|
|
@ -30,6 +30,10 @@ There are four layers:
|
||||||
- Tap `F3`, `F4`, `F5`, `F6` to resize a window via [Divvy](http://mizage.com/divvy/).
|
- Tap `F3`, `F4`, `F5`, `F6` to resize a window via [Divvy](http://mizage.com/divvy/).
|
||||||
- Tap `F14`, `F15` to adjust display brightness.
|
- Tap `F14`, `F15` to adjust display brightness.
|
||||||
|
|
||||||
|
**IMPORTANT**: If you have another keyboard connected via Bluetooth, then `F14` and `F15` will not work.
|
||||||
|
Turn off that Bluetooth keyboard. Re-plug you ErgoDox. Enjoy!
|
||||||
|
|
||||||
|
|
||||||
## CTRL/ESC
|
## CTRL/ESC
|
||||||
|
|
||||||
Both of those keys are frequently used in Vim.
|
Both of those keys are frequently used in Vim.
|
||||||
|
|
|
@ -114,12 +114,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs just one time when the keyboard initializes.
|
// Runs just one time when the keyboard initializes.
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
|
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs constantly in the background, in a loop.
|
// Runs constantly in the background, in a loop.
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
|
|
||||||
uint8_t layer = biton32(layer_state);
|
uint8_t layer = biton32(layer_state);
|
||||||
|
|
||||||
|
|
Binary file not shown.
|
@ -215,12 +215,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs just one time when the keyboard initializes.
|
// Runs just one time when the keyboard initializes.
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
return NULL;
|
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs constantly in the background, in a loop.
|
// Runs constantly in the background, in a loop.
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
|
|
||||||
ergodox_board_led_off();
|
ergodox_board_led_off();
|
||||||
ergodox_right_led_1_off();
|
ergodox_right_led_1_off();
|
||||||
|
@ -238,5 +238,5 @@ void * matrix_scan_user(void) {
|
||||||
if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) {
|
if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) {
|
||||||
ergodox_right_led_3_on();
|
ergodox_right_led_3_on();
|
||||||
}
|
}
|
||||||
return NULL;
|
|
||||||
};
|
};
|
||||||
|
|
Binary file not shown.
BIN
keyboard/ergodox_ez/keymaps/tm2030/tm2030.hex
Normal file
BIN
keyboard/ergodox_ez/keymaps/tm2030/tm2030.hex
Normal file
Binary file not shown.
|
@ -155,12 +155,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs just one time when the keyboard initializes.
|
// Runs just one time when the keyboard initializes.
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
|
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs constantly in the background, in a loop.
|
// Runs constantly in the background, in a loop.
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
|
|
||||||
uint8_t layer = biton32(layer_state);
|
uint8_t layer = biton32(layer_state);
|
||||||
|
|
||||||
|
|
Binary file not shown.
|
@ -337,12 +337,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs just one time when the keyboard initializes.
|
// Runs just one time when the keyboard initializes.
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
|
|
||||||
};
|
};
|
||||||
|
|
||||||
// Runs constantly in the background, in a loop.
|
// Runs constantly in the background, in a loop.
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
|
|
||||||
uint8_t layer = biton32(layer_state);
|
uint8_t layer = biton32(layer_state);
|
||||||
|
|
||||||
|
|
Binary file not shown.
9
keyboard/ergodox_ez/makeallhex.sh
Executable file
9
keyboard/ergodox_ez/makeallhex.sh
Executable file
|
@ -0,0 +1,9 @@
|
||||||
|
#!/bin/bash
|
||||||
|
#a quick tool to rebuild all the hex files for the keymaps in the ./keymaps/ directory
|
||||||
|
make clean
|
||||||
|
for f in ./keymaps/*
|
||||||
|
do
|
||||||
|
MAPNAME=$(echo "$f"|sed -r 's#^./keymaps/##')
|
||||||
|
make KEYMAP=$MAPNAME
|
||||||
|
mv ergodox_ez.hex "$f/$MAPNAME.hex"
|
||||||
|
done
|
|
@ -62,12 +62,12 @@ uint32_t matrix_scan_count;
|
||||||
|
|
||||||
|
|
||||||
__attribute__ ((weak))
|
__attribute__ ((weak))
|
||||||
void * matrix_init_kb(void) {
|
void matrix_init_kb(void) {
|
||||||
};
|
}
|
||||||
|
|
||||||
__attribute__ ((weak))
|
__attribute__ ((weak))
|
||||||
void * matrix_scan_kb(void) {
|
void matrix_scan_kb(void) {
|
||||||
};
|
}
|
||||||
|
|
||||||
inline
|
inline
|
||||||
uint8_t matrix_rows(void)
|
uint8_t matrix_rows(void)
|
||||||
|
@ -102,9 +102,7 @@ void matrix_init(void)
|
||||||
matrix_scan_count = 0;
|
matrix_scan_count = 0;
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
if (matrix_init_kb) {
|
matrix_init_kb();
|
||||||
(*matrix_init_kb)();
|
|
||||||
}
|
|
||||||
|
|
||||||
}
|
}
|
||||||
|
|
||||||
|
@ -163,9 +161,7 @@ uint8_t matrix_scan(void)
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
if (matrix_scan_kb) {
|
matrix_scan_kb();
|
||||||
(*matrix_scan_kb)();
|
|
||||||
}
|
|
||||||
|
|
||||||
return 1;
|
return 1;
|
||||||
}
|
}
|
||||||
|
|
|
@ -1,16 +1,16 @@
|
||||||
#include "hhkb_qmk.h"
|
#include "hhkb_qmk.h"
|
||||||
|
|
||||||
__attribute__ ((weak))
|
__attribute__ ((weak))
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
// leave these blank
|
// leave these blank
|
||||||
};
|
};
|
||||||
|
|
||||||
__attribute__ ((weak))
|
__attribute__ ((weak))
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
// leave these blank
|
// leave these blank
|
||||||
};
|
};
|
||||||
|
|
||||||
void * matrix_init_kb(void) {
|
void matrix_init_kb(void) {
|
||||||
// put your keyboard start-up code here
|
// put your keyboard start-up code here
|
||||||
// runs once when the firmware starts up
|
// runs once when the firmware starts up
|
||||||
|
|
||||||
|
@ -19,7 +19,7 @@ void * matrix_init_kb(void) {
|
||||||
}
|
}
|
||||||
};
|
};
|
||||||
|
|
||||||
void * matrix_scan_kb(void) {
|
void matrix_scan_kb(void) {
|
||||||
// put your looping keyboard code here
|
// put your looping keyboard code here
|
||||||
// runs every cycle (a lot)
|
// runs every cycle (a lot)
|
||||||
|
|
||||||
|
|
|
@ -24,7 +24,7 @@
|
||||||
{ K70, K71, K72, K73, K74, K75, K76, KC_NO } \
|
{ K70, K71, K72, K73, K74, K75, K76, KC_NO } \
|
||||||
}
|
}
|
||||||
|
|
||||||
void * matrix_init_user(void);
|
void matrix_init_user(void);
|
||||||
void * matrix_scan_user(void);
|
void matrix_scan_user(void);
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|
|
@ -1,16 +1,16 @@
|
||||||
#include "jd45.h"
|
#include "jd45.h"
|
||||||
|
|
||||||
__attribute__ ((weak))
|
__attribute__ ((weak))
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
|
|
||||||
};
|
};
|
||||||
|
|
||||||
__attribute__ ((weak))
|
__attribute__ ((weak))
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
|
|
||||||
};
|
};
|
||||||
|
|
||||||
void * matrix_init_kb(void) {
|
void matrix_init_kb(void) {
|
||||||
#ifdef BACKLIGHT_ENABLE
|
#ifdef BACKLIGHT_ENABLE
|
||||||
backlight_init_ports();
|
backlight_init_ports();
|
||||||
#endif
|
#endif
|
||||||
|
@ -20,7 +20,7 @@ void * matrix_init_kb(void) {
|
||||||
}
|
}
|
||||||
};
|
};
|
||||||
|
|
||||||
void * matrix_scan_kb(void) {
|
void matrix_scan_kb(void) {
|
||||||
if (matrix_scan_user) {
|
if (matrix_scan_user) {
|
||||||
(*matrix_scan_user)();
|
(*matrix_scan_user)();
|
||||||
}
|
}
|
||||||
|
|
|
@ -6,7 +6,7 @@
|
||||||
#include "backlight.h"
|
#include "backlight.h"
|
||||||
#include <stddef.h>
|
#include <stddef.h>
|
||||||
|
|
||||||
void * matrix_init_user(void);
|
void matrix_init_user(void);
|
||||||
void * matrix_scan_user(void);
|
void matrix_scan_user(void);
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|
|
@ -17,31 +17,91 @@
|
||||||
#define _RS 4
|
#define _RS 4
|
||||||
|
|
||||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||||
[_QW] = { /* Qwerty */
|
|
||||||
|
/* Qwerty
|
||||||
|
* ,-----------------------------------------------------------------------------------.
|
||||||
|
* | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp |
|
||||||
|
* |------+------+------+------+------+-------------+------+------+------+------+------|
|
||||||
|
* | Esc | A | S | D | F | G | H | J | K | L | ; | " |
|
||||||
|
* |------+------+------+------+------+------|------+------+------+------+------+------|
|
||||||
|
* | Shift| Z | X | C | V | B | N | M | , | . | / |Enter |
|
||||||
|
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||||
|
* | Brite| Ctrl | Alt | GUI |Raise | Space |Lower | Left | Down | Up |Right |
|
||||||
|
* `-----------------------------------------------------------------------------------'
|
||||||
|
*/
|
||||||
|
[_QW] = {
|
||||||
{KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
|
{KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
|
||||||
{KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT},
|
{KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT},
|
||||||
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT },
|
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT },
|
||||||
{M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
|
{M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
|
||||||
},
|
},
|
||||||
[_CM] = { /* Colemak */
|
|
||||||
|
/* Colemak
|
||||||
|
* ,-----------------------------------------------------------------------------------.
|
||||||
|
* | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp |
|
||||||
|
* |------+------+------+------+------+-------------+------+------+------+------+------|
|
||||||
|
* | Esc | A | R | S | T | D | H | N | E | I | O | " |
|
||||||
|
* |------+------+------+------+------+------|------+------+------+------+------+------|
|
||||||
|
* | Shift| Z | X | C | V | B | K | M | , | . | / |Enter |
|
||||||
|
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||||
|
* | Brite| Ctrl | Alt | GUI |Raise | Space |Lower | Left | Down | Up |Right |
|
||||||
|
* `-----------------------------------------------------------------------------------'
|
||||||
|
*/
|
||||||
|
[_CM] = {
|
||||||
{KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC},
|
{KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC},
|
||||||
{KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT},
|
{KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT},
|
||||||
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT },
|
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT },
|
||||||
{M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
|
{M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
|
||||||
},
|
},
|
||||||
[_DV] = { /* Dvorak */
|
|
||||||
|
/* Dvorak
|
||||||
|
* ,-----------------------------------------------------------------------------------.
|
||||||
|
* | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp |
|
||||||
|
* |------+------+------+------+------+-------------+------+------+------+------+------|
|
||||||
|
* | Esc | A | O | E | U | I | D | H | T | N | S | / |
|
||||||
|
* |------+------+------+------+------+------|------+------+------+------+------+------|
|
||||||
|
* | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter |
|
||||||
|
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||||
|
* | Brite| Ctrl | Alt | GUI |Raise | Space |Lower | Left | Down | Up |Right |
|
||||||
|
* `-----------------------------------------------------------------------------------'
|
||||||
|
*/
|
||||||
|
[_DV] = {
|
||||||
{KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC},
|
{KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC},
|
||||||
{KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH},
|
{KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH},
|
||||||
{KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT },
|
{KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT },
|
||||||
{M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
|
{M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
|
||||||
},
|
},
|
||||||
[_RS] = { /* RAISE */
|
|
||||||
|
/* Raise
|
||||||
|
* ,-----------------------------------------------------------------------------------.
|
||||||
|
* | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp |
|
||||||
|
* |------+------+------+------+------+-------------+------+------+------+------+------|
|
||||||
|
* | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ |
|
||||||
|
* |------+------+------+------+------+------|------+------+------+------+------+------|
|
||||||
|
* | Shift| F7 | F8 | F9 | F10 | F11 | F12 |Qwerty|Colemk|Dvorak| Reset|Enter |
|
||||||
|
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||||
|
* | Brite| Ctrl | Alt | GUI |Raise | Space |Lower | Next | Vol- | Vol+ | Play |
|
||||||
|
* `-----------------------------------------------------------------------------------'
|
||||||
|
*/
|
||||||
|
[_RS] = {
|
||||||
{KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC},
|
{KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC},
|
||||||
{KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS},
|
{KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS},
|
||||||
{KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_CM), DF(_DV), RESET, KC_TRNS},
|
{KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_CM), DF(_DV), RESET, KC_TRNS},
|
||||||
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
|
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
|
||||||
},
|
},
|
||||||
[_LW] = { /* LOWER */
|
|
||||||
|
/* Lower
|
||||||
|
* ,-----------------------------------------------------------------------------------.
|
||||||
|
* | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp |
|
||||||
|
* |------+------+------+------+------+-------------+------+------+------+------+------|
|
||||||
|
* | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | |
|
||||||
|
* |------+------+------+------+------+------|------+------+------+------+------+------|
|
||||||
|
* | Shift| F7 | F8 | F9 | F10 | F11 | F12 |Qwerty|Colemk|Dvorak| Reset|Enter |
|
||||||
|
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||||
|
* | Brite| Ctrl | Alt | GUI |Raise | Space |Lower | Next | Vol- | Vol+ | Play |
|
||||||
|
* `-----------------------------------------------------------------------------------'
|
||||||
|
*/
|
||||||
|
[_LW] = {
|
||||||
{KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC},
|
{KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC},
|
||||||
{KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE},
|
{KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE},
|
||||||
{KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_CM), DF(_DV), RESET, KC_TRNS},
|
{KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_CM), DF(_DV), RESET, KC_TRNS},
|
||||||
|
|
|
@ -150,7 +150,7 @@ float start_up[][2] = {
|
||||||
{440.0*pow(2.0,(64)/12.0), 1000},
|
{440.0*pow(2.0,(64)/12.0), 1000},
|
||||||
};
|
};
|
||||||
|
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
init_notes();
|
init_notes();
|
||||||
play_notes(&start_up, 9, false);
|
play_notes(&start_up, 9, false);
|
||||||
}
|
}
|
|
@ -1,16 +1,16 @@
|
||||||
#include "planck.h"
|
#include "planck.h"
|
||||||
|
|
||||||
__attribute__ ((weak))
|
__attribute__ ((weak))
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
|
|
||||||
};
|
}
|
||||||
|
|
||||||
__attribute__ ((weak))
|
__attribute__ ((weak))
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
|
|
||||||
};
|
}
|
||||||
|
|
||||||
void * matrix_init_kb(void) {
|
void matrix_init_kb(void) {
|
||||||
#ifdef BACKLIGHT_ENABLE
|
#ifdef BACKLIGHT_ENABLE
|
||||||
backlight_init_ports();
|
backlight_init_ports();
|
||||||
#endif
|
#endif
|
||||||
|
@ -24,13 +24,9 @@ void * matrix_init_kb(void) {
|
||||||
DDRE |= (1<<6);
|
DDRE |= (1<<6);
|
||||||
PORTE |= (1<<6);
|
PORTE |= (1<<6);
|
||||||
|
|
||||||
if (matrix_init_user) {
|
matrix_init_user();
|
||||||
(*matrix_init_user)();
|
}
|
||||||
}
|
|
||||||
};
|
|
||||||
|
|
||||||
void * matrix_scan_kb(void) {
|
void matrix_scan_kb(void) {
|
||||||
if (matrix_scan_user) {
|
matrix_scan_user();
|
||||||
(*matrix_scan_user)();
|
}
|
||||||
}
|
|
||||||
};
|
|
||||||
|
|
|
@ -40,7 +40,7 @@
|
||||||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \
|
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \
|
||||||
}
|
}
|
||||||
|
|
||||||
void * matrix_init_user(void);
|
void matrix_init_user(void);
|
||||||
void * matrix_scan_user(void);
|
void matrix_scan_user(void);
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|
139
keyboard/retro_refit/Makefile
Normal file
139
keyboard/retro_refit/Makefile
Normal file
|
@ -0,0 +1,139 @@
|
||||||
|
#----------------------------------------------------------------------------
|
||||||
|
# On command line:
|
||||||
|
#
|
||||||
|
# make all = Make software.
|
||||||
|
#
|
||||||
|
# make clean = Clean out built project files.
|
||||||
|
#
|
||||||
|
# make coff = Convert ELF to AVR COFF.
|
||||||
|
#
|
||||||
|
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||||
|
#
|
||||||
|
# make program = Download the hex file to the device.
|
||||||
|
# Please customize your programmer settings(PROGRAM_CMD)
|
||||||
|
#
|
||||||
|
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||||
|
# (must have teensy_loader_cli installed).
|
||||||
|
#
|
||||||
|
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||||
|
# have dfu-programmer installed).
|
||||||
|
#
|
||||||
|
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||||
|
# have Atmel FLIP installed).
|
||||||
|
#
|
||||||
|
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||||
|
# (must have dfu-programmer installed).
|
||||||
|
#
|
||||||
|
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||||
|
# (must have Atmel FLIP installed).
|
||||||
|
#
|
||||||
|
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||||
|
# with avr-gdb or avr-insight as the front end for debugging.
|
||||||
|
#
|
||||||
|
# make filename.s = Just compile filename.c into the assembler code only.
|
||||||
|
#
|
||||||
|
# make filename.i = Create a preprocessed source file for use in submitting
|
||||||
|
# bug reports to the GCC project.
|
||||||
|
#
|
||||||
|
# To rebuild project do "make clean" then "make all".
|
||||||
|
#----------------------------------------------------------------------------
|
||||||
|
|
||||||
|
# Target file name (without extension).
|
||||||
|
TARGET = retro_refit
|
||||||
|
|
||||||
|
|
||||||
|
# Directory common source filess exist
|
||||||
|
TOP_DIR = ../..
|
||||||
|
TMK_DIR = ../../tmk_core
|
||||||
|
|
||||||
|
# Directory keyboard dependent files exist
|
||||||
|
TARGET_DIR = .
|
||||||
|
|
||||||
|
# # project specific files
|
||||||
|
SRC = retro_refit.c
|
||||||
|
|
||||||
|
ifdef KEYMAP
|
||||||
|
SRC := keymaps/$(KEYMAP).c $(SRC)
|
||||||
|
else
|
||||||
|
SRC := keymaps/default.c $(SRC)
|
||||||
|
endif
|
||||||
|
|
||||||
|
CONFIG_H = config.h
|
||||||
|
|
||||||
|
# MCU name
|
||||||
|
#MCU = at90usb1287
|
||||||
|
MCU = atmega32u4
|
||||||
|
|
||||||
|
# Processor frequency.
|
||||||
|
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||||
|
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||||
|
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||||
|
# automatically to create a 32-bit value in your source code.
|
||||||
|
#
|
||||||
|
# This will be an integer division of F_USB below, as it is sourced by
|
||||||
|
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||||
|
# does not *change* the processor frequency - it should merely be updated to
|
||||||
|
# reflect the processor speed set externally so that the code can use accurate
|
||||||
|
# software delays.
|
||||||
|
F_CPU = 16000000
|
||||||
|
|
||||||
|
|
||||||
|
#
|
||||||
|
# LUFA specific
|
||||||
|
#
|
||||||
|
# Target architecture (see library "Board Types" documentation).
|
||||||
|
ARCH = AVR8
|
||||||
|
|
||||||
|
# Input clock frequency.
|
||||||
|
# This will define a symbol, F_USB, in all source code files equal to the
|
||||||
|
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||||
|
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||||
|
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||||
|
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||||
|
# at the end, this will be done automatically to create a 32-bit value in your
|
||||||
|
# source code.
|
||||||
|
#
|
||||||
|
# If no clock division is performed on the input clock inside the AVR (via the
|
||||||
|
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||||
|
F_USB = $(F_CPU)
|
||||||
|
|
||||||
|
# Interrupt driven control endpoint task(+60)
|
||||||
|
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||||
|
|
||||||
|
|
||||||
|
# Boot Section Size in *bytes*
|
||||||
|
# Teensy halfKay 512
|
||||||
|
# Teensy++ halfKay 1024
|
||||||
|
# Atmel DFU loader 4096
|
||||||
|
# LUFA bootloader 4096
|
||||||
|
# USBaspLoader 2048
|
||||||
|
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||||
|
|
||||||
|
|
||||||
|
# Build Options
|
||||||
|
# comment out to disable the options.
|
||||||
|
#
|
||||||
|
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||||
|
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||||
|
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||||
|
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||||
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
|
# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||||
|
# NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||||
|
# MIDI_ENABLE = YES # MIDI controls
|
||||||
|
# UNICODE_ENABLE = YES # Unicode
|
||||||
|
# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
|
|
||||||
|
|
||||||
|
# Optimize size but this may cause error "relocation truncated to fit"
|
||||||
|
#EXTRALDFLAGS = -Wl,--relax
|
||||||
|
|
||||||
|
# Search Path
|
||||||
|
VPATH += $(TARGET_DIR)
|
||||||
|
VPATH += $(TOP_DIR)
|
||||||
|
VPATH += $(TMK_DIR)
|
||||||
|
|
||||||
|
include $(TOP_DIR)/quantum/quantum.mk
|
||||||
|
|
24
keyboard/retro_refit/README.md
Normal file
24
keyboard/retro_refit/README.md
Normal file
|
@ -0,0 +1,24 @@
|
||||||
|
retro_refit keyboard firmware
|
||||||
|
======================
|
||||||
|
|
||||||
|
## Quantum MK Firmware
|
||||||
|
|
||||||
|
For the full Quantum feature list, see [the parent README.md](/README.md).
|
||||||
|
|
||||||
|
## Building
|
||||||
|
|
||||||
|
Download or clone the whole firmware and navigate to the keyboard/retro_refit folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
|
||||||
|
|
||||||
|
Depending on which keymap you would like to use, you will have to compile slightly differently.
|
||||||
|
|
||||||
|
### Default
|
||||||
|
To build with the default keymap, simply run `make`.
|
||||||
|
|
||||||
|
### Other Keymaps
|
||||||
|
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` and see keymap document (you can find in top README.md) and existent keymap files.
|
||||||
|
|
||||||
|
To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:
|
||||||
|
```
|
||||||
|
$ make KEYMAP=[default|jack|<name>]
|
||||||
|
```
|
||||||
|
Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
|
79
keyboard/retro_refit/config.h
Normal file
79
keyboard/retro_refit/config.h
Normal file
|
@ -0,0 +1,79 @@
|
||||||
|
/*
|
||||||
|
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 2 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef CONFIG_H
|
||||||
|
#define CONFIG_H
|
||||||
|
|
||||||
|
#include "config_common.h"
|
||||||
|
|
||||||
|
/* USB Device descriptor parameter */
|
||||||
|
#define VENDOR_ID 0xFEED
|
||||||
|
#define PRODUCT_ID 0x6060
|
||||||
|
#define DEVICE_VER 0x0001
|
||||||
|
#define MANUFACTURER Nobody
|
||||||
|
#define PRODUCT retro_refit
|
||||||
|
#define DESCRIPTION Retro Refit
|
||||||
|
|
||||||
|
/* key matrix size */
|
||||||
|
#define MATRIX_ROWS 11
|
||||||
|
#define MATRIX_COLS 8
|
||||||
|
|
||||||
|
// See note in retro_refit.h for an explanation of how this matrix is wired up
|
||||||
|
#define COLS (int []){ B0, B1, B2, B3, D2, D3, C7, D5 }
|
||||||
|
#define ROWS (int []){ D4, D7, B4, B5, B6, F7, F6, F5, F4, F1, F0 }
|
||||||
|
|
||||||
|
/* COL2ROW or ROW2COL */
|
||||||
|
#define DIODE_DIRECTION COL2ROW
|
||||||
|
|
||||||
|
/* define if matrix has ghost */
|
||||||
|
//#define MATRIX_HAS_GHOST
|
||||||
|
|
||||||
|
/* number of backlight levels */
|
||||||
|
#define BACKLIGHT_LEVELS 0
|
||||||
|
|
||||||
|
/* Set 0 if debouncing isn't needed */
|
||||||
|
#define DEBOUNCE 5
|
||||||
|
|
||||||
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||||
|
#define LOCKING_SUPPORT_ENABLE
|
||||||
|
/* Locking resynchronize hack */
|
||||||
|
#define LOCKING_RESYNC_ENABLE
|
||||||
|
|
||||||
|
/* key combination for command */
|
||||||
|
#define IS_COMMAND() ( \
|
||||||
|
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||||
|
)
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Feature disable options
|
||||||
|
* These options are also useful to firmware size reduction.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* disable debug print */
|
||||||
|
//#define NO_DEBUG
|
||||||
|
|
||||||
|
/* disable print */
|
||||||
|
//#define NO_PRINT
|
||||||
|
|
||||||
|
/* disable action features */
|
||||||
|
//#define NO_ACTION_LAYER
|
||||||
|
//#define NO_ACTION_TAPPING
|
||||||
|
//#define NO_ACTION_ONESHOT
|
||||||
|
//#define NO_ACTION_MACRO
|
||||||
|
//#define NO_ACTION_FUNCTION
|
||||||
|
|
||||||
|
#endif
|
33
keyboard/retro_refit/keymaps/default.c
Normal file
33
keyboard/retro_refit/keymaps/default.c
Normal file
|
@ -0,0 +1,33 @@
|
||||||
|
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
|
||||||
|
// this is the style you want to emulate.
|
||||||
|
|
||||||
|
#include "retro_refit.h"
|
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||||
|
[0] =
|
||||||
|
KEYMAP( ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, NLCK, SLCK, PSCR, PAUS, \
|
||||||
|
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BSPC, HOME, \
|
||||||
|
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, PGUP, \
|
||||||
|
BSLS, A, S, D, F, G, H, J, K, L, SCLN, QUOT, ENT, PGDN, \
|
||||||
|
LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, UP, END, \
|
||||||
|
LCTL, LGUI, LALT, SPC, INS, DEL, LEFT, DOWN, RGHT),
|
||||||
|
};
|
||||||
|
|
||||||
|
const uint16_t PROGMEM fn_actions[] = {
|
||||||
|
|
||||||
|
};
|
||||||
|
|
||||||
|
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||||
|
{
|
||||||
|
// MACRODOWN only works in this function
|
||||||
|
switch(id) {
|
||||||
|
case 0:
|
||||||
|
if (record->event.pressed) {
|
||||||
|
register_code(KC_RSFT);
|
||||||
|
} else {
|
||||||
|
unregister_code(KC_RSFT);
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
return MACRO_NONE;
|
||||||
|
};
|
68
keyboard/retro_refit/retro_refit.c
Normal file
68
keyboard/retro_refit/retro_refit.c
Normal file
|
@ -0,0 +1,68 @@
|
||||||
|
#include "retro_refit.h"
|
||||||
|
|
||||||
|
__attribute__ ((weak))
|
||||||
|
void matrix_init_user(void) {
|
||||||
|
// leave this function blank - it can be defined in a keymap file
|
||||||
|
};
|
||||||
|
|
||||||
|
__attribute__ ((weak))
|
||||||
|
void matrix_scan_user(void) {
|
||||||
|
// leave this function blank - it can be defined in a keymap file
|
||||||
|
};
|
||||||
|
|
||||||
|
__attribute__ ((weak))
|
||||||
|
void led_set_user(uint8_t usb_led) {
|
||||||
|
// leave this function blank - it can be defined in a keymap file
|
||||||
|
};
|
||||||
|
|
||||||
|
void matrix_init_kb(void) {
|
||||||
|
// put your keyboard start-up code here
|
||||||
|
// runs once when the firmware starts up
|
||||||
|
|
||||||
|
// Disable status LED on KB, enable status LED on Teensy (KB_STATUS = !TEENSY_STATUS)
|
||||||
|
DDRD |= (1<<6);
|
||||||
|
PORTD |= (1<<6);
|
||||||
|
|
||||||
|
matrix_init_user();
|
||||||
|
};
|
||||||
|
|
||||||
|
void amatrix_scan_kb(void) {
|
||||||
|
// put your looping keyboard code here
|
||||||
|
// runs every cycle (a lot)
|
||||||
|
|
||||||
|
matrix_scan_user();
|
||||||
|
};
|
||||||
|
|
||||||
|
void led_set_kb(uint8_t usb_led) {
|
||||||
|
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||||
|
|
||||||
|
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
|
||||||
|
// output low
|
||||||
|
DDRD |= (1<<0);
|
||||||
|
PORTD &= ~(1<<0);
|
||||||
|
} else {
|
||||||
|
// Hi-Z
|
||||||
|
DDRD &= ~(1<<0);
|
||||||
|
PORTD &= ~(1<<0);
|
||||||
|
}
|
||||||
|
if (usb_led & (1<<USB_LED_NUM_LOCK)) {
|
||||||
|
// output low
|
||||||
|
DDRD |= (1<<1);
|
||||||
|
PORTD &= ~(1<<1);
|
||||||
|
} else {
|
||||||
|
// Hi-Z
|
||||||
|
DDRD &= ~(1<<1);
|
||||||
|
PORTD &= ~(1<<1);
|
||||||
|
}
|
||||||
|
if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
|
||||||
|
// output low
|
||||||
|
DDRC |= (1<<6);
|
||||||
|
PORTC &= ~(1<<6);
|
||||||
|
} else {
|
||||||
|
// Hi-Z
|
||||||
|
DDRC &= ~(1<<6);
|
||||||
|
PORTC &= ~(1<<6);
|
||||||
|
}
|
||||||
|
|
||||||
|
led_set_user(usb_led);
|
||||||
|
};
|
45
keyboard/retro_refit/retro_refit.h
Normal file
45
keyboard/retro_refit/retro_refit.h
Normal file
|
@ -0,0 +1,45 @@
|
||||||
|
#ifndef RETRO_REFIT_H
|
||||||
|
#define RETRO_REFIT_H
|
||||||
|
|
||||||
|
#include "matrix.h"
|
||||||
|
#include "keymap_common.h"
|
||||||
|
#include "led.h"
|
||||||
|
#include <stddef.h>
|
||||||
|
|
||||||
|
// This macro is an example of using a non-standard row-column matrix. The
|
||||||
|
// keyboard in question had 11 rows and 8 columns, but the rows were not all
|
||||||
|
// horizontal, and the columns were not all vertical. For example, row 2
|
||||||
|
// contained "Print Screen", "N", "M", ",", ".", "/", "Right Shift", and
|
||||||
|
// "Left Alt". Column 0 contained "F6", "7", "O", "'", "Q", "D", "B",
|
||||||
|
// "Left Alt", "Up Arrow", and "Down Arrow".
|
||||||
|
//
|
||||||
|
// The macro makes programming the keys easier and in a more straight-forward
|
||||||
|
// manner because it realigns the keys into a 6x15 sensible keyboard layout
|
||||||
|
// instead of the obtuse 11x8 matrix.
|
||||||
|
|
||||||
|
#define KEYMAP( \
|
||||||
|
K77, K05, K04, K03, K02, K01, K00, KA7, KA6, KA5, KA4, KA3, KA2, K11, K94, \
|
||||||
|
K27, K76, K75, K74, K73, K72, K71, K70, K67, K66, K65, K64, K63, K62, KA1, \
|
||||||
|
K61, K60, K57, K56, K55, K54, K53, K52, K51, K50, K47, K46, K45, K97, \
|
||||||
|
K43, K42, K41, K40, K37, K36, K35, K34, K33, K32, K31, K30, K44, K87, \
|
||||||
|
K26, K24, K23, K22, K21, K20, K17, K16, K15, K14, K13, K12, KA0, K91, \
|
||||||
|
K10, K06, K25, K07, K86, K85, K95, K90, K93 \
|
||||||
|
) { \
|
||||||
|
{ KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, }, \
|
||||||
|
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, }, \
|
||||||
|
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, }, \
|
||||||
|
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, }, \
|
||||||
|
{ KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47, }, \
|
||||||
|
{ KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57, }, \
|
||||||
|
{ KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67, }, \
|
||||||
|
{ KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77, }, \
|
||||||
|
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K85, KC_##K86, KC_##K87, }, \
|
||||||
|
{ KC_##K90, KC_##K91, KC_NO, KC_##K93, KC_##K94, KC_##K95, KC_NO, KC_##K97, }, \
|
||||||
|
{ KC_##KA0, KC_##KA1, KC_##KA2, KC_##KA3, KC_##KA4, KC_##KA5, KC_##KA6, KC_##KA7, } \
|
||||||
|
}
|
||||||
|
|
||||||
|
void matrix_init_user(void);
|
||||||
|
void matrix_scan_user(void);
|
||||||
|
void led_set_user(uint8_t usb_led);
|
||||||
|
|
||||||
|
#endif
|
|
@ -19,9 +19,16 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
#include "stdint.h"
|
#include "stdint.h"
|
||||||
#include "led.h"
|
#include "led.h"
|
||||||
|
|
||||||
|
__attribute__ ((weak))
|
||||||
|
void led_set_kb(uint8_t usb_led) {
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
void led_set(uint8_t usb_led)
|
void led_set(uint8_t usb_led)
|
||||||
{
|
{
|
||||||
|
|
||||||
|
// Example LED Code
|
||||||
|
//
|
||||||
// // Using PE6 Caps Lock LED
|
// // Using PE6 Caps Lock LED
|
||||||
// if (usb_led & (1<<USB_LED_CAPS_LOCK))
|
// if (usb_led & (1<<USB_LED_CAPS_LOCK))
|
||||||
// {
|
// {
|
||||||
|
@ -35,4 +42,6 @@ void led_set(uint8_t usb_led)
|
||||||
// DDRE &= ~(1<<6);
|
// DDRE &= ~(1<<6);
|
||||||
// PORTE &= ~(1<<6);
|
// PORTE &= ~(1<<6);
|
||||||
// }
|
// }
|
||||||
|
|
||||||
|
led_set_kb(usb_led);
|
||||||
}
|
}
|
||||||
|
|
|
@ -48,14 +48,14 @@ static void unselect_rows(void);
|
||||||
static void select_row(uint8_t row);
|
static void select_row(uint8_t row);
|
||||||
|
|
||||||
__attribute__ ((weak))
|
__attribute__ ((weak))
|
||||||
void * matrix_init_kb(void) {
|
void matrix_init_kb(void) {
|
||||||
|
|
||||||
};
|
}
|
||||||
|
|
||||||
__attribute__ ((weak))
|
__attribute__ ((weak))
|
||||||
void * matrix_scan_kb(void) {
|
void matrix_scan_kb(void) {
|
||||||
|
|
||||||
};
|
}
|
||||||
|
|
||||||
inline
|
inline
|
||||||
uint8_t matrix_rows(void)
|
uint8_t matrix_rows(void)
|
||||||
|
@ -86,9 +86,7 @@ void matrix_init(void)
|
||||||
matrix_debouncing[i] = 0;
|
matrix_debouncing[i] = 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
if (matrix_init_kb) {
|
matrix_init_kb();
|
||||||
(*matrix_init_kb)();
|
|
||||||
}
|
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
|
@ -152,9 +150,7 @@ uint8_t matrix_scan(void)
|
||||||
}
|
}
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
if (matrix_scan_kb) {
|
matrix_scan_kb();
|
||||||
(*matrix_scan_kb)();
|
|
||||||
}
|
|
||||||
|
|
||||||
return 1;
|
return 1;
|
||||||
}
|
}
|
||||||
|
|
|
@ -1,29 +1,36 @@
|
||||||
#include "%KEYBOARD%.h"
|
#include "%KEYBOARD%.h"
|
||||||
|
|
||||||
__attribute__ ((weak))
|
__attribute__ ((weak))
|
||||||
void * matrix_init_user(void) {
|
void matrix_init_user(void) {
|
||||||
// leave these blank
|
// leave this function blank - it can be defined in a keymap file
|
||||||
};
|
};
|
||||||
|
|
||||||
__attribute__ ((weak))
|
__attribute__ ((weak))
|
||||||
void * matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
// leave these blank
|
// leave this function blank - it can be defined in a keymap file
|
||||||
};
|
}
|
||||||
|
|
||||||
void * matrix_init_kb(void) {
|
__attribute__ ((weak))
|
||||||
|
void led_set_user(uint8_t usb_led) {
|
||||||
|
// leave this function blank - it can be defined in a keymap file
|
||||||
|
}
|
||||||
|
|
||||||
|
void matrix_init_kb(void) {
|
||||||
// put your keyboard start-up code here
|
// put your keyboard start-up code here
|
||||||
// runs once when the firmware starts up
|
// runs once when the firmware starts up
|
||||||
|
|
||||||
if (matrix_init_user) {
|
matrix_init_user();
|
||||||
(*matrix_init_user)();
|
}
|
||||||
}
|
|
||||||
};
|
|
||||||
|
|
||||||
void * matrix_scan_kb(void) {
|
void matrix_scan_kb(void) {
|
||||||
// put your looping keyboard code here
|
// put your looping keyboard code here
|
||||||
// runs every cycle (a lot)
|
// runs every cycle (a lot)
|
||||||
|
|
||||||
if (matrix_scan_user) {
|
matrix_scan_user();
|
||||||
(*matrix_scan_user)();
|
}
|
||||||
}
|
|
||||||
};
|
void led_set_kb(uint8_t usb_led) {
|
||||||
|
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||||
|
|
||||||
|
led_set_user(usb_led);
|
||||||
|
}
|
|
@ -19,7 +19,8 @@
|
||||||
{ k10, KC_NO, k11 }, \
|
{ k10, KC_NO, k11 }, \
|
||||||
}
|
}
|
||||||
|
|
||||||
void * matrix_init_user(void);
|
void matrix_init_user(void);
|
||||||
void * matrix_scan_user(void);
|
void matrix_scan_user(void);
|
||||||
|
void led_set_user(uint8_t usb_led);
|
||||||
|
|
||||||
#endif
|
#endif
|
|
@ -1 +0,0 @@
|
||||||
Subproject commit 19892c196894e6676fa69c732e05a03a68d5cb07
|
|
|
@ -34,6 +34,9 @@ extern "C" {
|
||||||
|
|
||||||
void led_set(uint8_t usb_led);
|
void led_set(uint8_t usb_led);
|
||||||
|
|
||||||
|
/* keyboard-specific LED functionality */
|
||||||
|
void led_set_kb(uint8_t usb_led);
|
||||||
|
|
||||||
#ifdef __cplusplus
|
#ifdef __cplusplus
|
||||||
}
|
}
|
||||||
#endif
|
#endif
|
||||||
|
|
|
@ -64,8 +64,8 @@ void matrix_power_up(void);
|
||||||
void matrix_power_down(void);
|
void matrix_power_down(void);
|
||||||
|
|
||||||
/* keyboard-specific setup/loop functionality */
|
/* keyboard-specific setup/loop functionality */
|
||||||
void * matrix_init_kb(void);
|
void matrix_init_kb(void);
|
||||||
void * matrix_scan_kb(void);
|
void matrix_scan_kb(void);
|
||||||
|
|
||||||
#ifdef __cplusplus
|
#ifdef __cplusplus
|
||||||
}
|
}
|
||||||
|
|
Loading…
Reference in a new issue