diff --git a/keyboards/ai03/orbit_x/config.h b/keyboards/ai03/orbit_x/config.h
new file mode 100644
index 0000000000..fb2ebe44f6
--- /dev/null
+++ b/keyboards/ai03/orbit_x/config.h
@@ -0,0 +1,175 @@
+/*
+Copyright 2019 Ryota Goto
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see .
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xA103
+#define PRODUCT_ID 0x0014
+#define DEVICE_VER 0x0001
+#define MANUFACTURER ai03 Design Studio
+#define PRODUCT OrbitX
+#define DESCRIPTION High-end compact ergonomic keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 8 // Double the rows for split
+#define MATRIX_COLS 6
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { D7, D6, D4, F0 }
+#define MATRIX_COL_PINS { E6, F6, B1, B0, C7, C6 }
+#define MATRIX_ROW_PINS_RIGHT { B5, D7, B4, D4 }
+#define MATRIX_COL_PINS_RIGHT { D6, B6, B1, B0, B3, B2 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+#define SPLIT_HAND_PIN D5
+#define SPLIT_USB_DETECT
+#define SPLIT_USB_TIMEOUT 2500
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP H
+//#define MAGIC_KEY_HELP_ALT SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER0_ALT GRAVE
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_EEPROM_CLEAR BSPACE
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#ifndef LINK_TIME_OPTIMIZATION_ENABLE
+ #define NO_ACTION_MACRO
+ #define NO_ACTION_FUNCTION
+#endif
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/ai03/orbit_x/info.json b/keyboards/ai03/orbit_x/info.json
new file mode 100644
index 0000000000..638ffec4df
--- /dev/null
+++ b/keyboards/ai03/orbit_x/info.json
@@ -0,0 +1,61 @@
+{
+ "keyboard_name": "Orbit-X",
+ "url": "",
+ "maintainer": "ai03",
+ "width": 13.5,
+ "height": 4.38,
+ "layouts": {
+ "LAYOUT": {
+ "layout": [
+ {"x":0, "y":0.38},
+ {"x":1, "y":0.38},
+ {"x":2, "y":0.13},
+ {"x":3, "y":0},
+ {"x":4, "y":0.13},
+ {"x":5, "y":0.25},
+ {"x":7.5, "y":0.25},
+ {"x":8.5, "y":0.13},
+ {"x":9.5, "y":0},
+ {"x":10.5, "y":0.13},
+ {"x":11.5, "y":0.38},
+ {"x":12.5, "y":0.38},
+ {"x":0, "y":1.38},
+ {"x":1, "y":1.38},
+ {"x":2, "y":1.13},
+ {"x":3, "y":1.0},
+ {"x":4, "y":1.13},
+ {"x":5, "y":1.25},
+ {"x":7.5, "y":1.25},
+ {"x":8.5, "y":1.13},
+ {"x":9.5, "y":1.0},
+ {"x":10.5, "y":1.13},
+ {"x":11.5, "y":1.38},
+ {"x":12.5, "y":1.38},
+ {"x":0, "y":2.38},
+ {"x":1, "y":2.38},
+ {"x":2, "y":2.13},
+ {"x":3, "y":2},
+ {"x":4, "y":2.13},
+ {"x":5, "y":2.25},
+ {"x":7.5, "y":2.25},
+ {"x":8.5, "y":2.13},
+ {"x":9.5, "y":2},
+ {"x":10.5, "y":2.13},
+ {"x":11.5, "y":2.38},
+ {"x":12.5, "y":2.38},
+ {"x":0, "y":3.38},
+ {"x":1, "y":3.38},
+ {"x":2, "y":3.13},
+ {"x":3, "y":3},
+ {"x":4.25, "y":3.38},
+ {"x":5.25, "y":3.25, "h":1.5},
+ {"x":7.25, "y":3.25, "h":1.5},
+ {"x":8.25, "y":3.38},
+ {"x":9.5, "y":3},
+ {"x":10.5, "y":3.13},
+ {"x":11.5, "y":3.38},
+ {"x":12.5, "y":3.38}
+ ]
+ }
+ }
+}
diff --git a/keyboards/ai03/orbit_x/keymaps/default/keymap.c b/keyboards/ai03/orbit_x/keymaps/default/keymap.c
new file mode 100644
index 0000000000..6b62d2a748
--- /dev/null
+++ b/keyboards/ai03/orbit_x/keymaps/default/keymap.c
@@ -0,0 +1,59 @@
+/* Copyright 2019 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+ _BASE,
+ _NUM,
+ _NAV,
+ _FN
+};
+
+/*
+ L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
+ L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
+ L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
+ L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \
+*/
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Base */
+ [_BASE] = LAYOUT(
+ KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
+ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT,
+ MO(3), KC_TAB, KC_LGUI, KC_LALT, MO(2), KC_SPC, KC_SPC, MO(1), KC_TAB, KC_DEL, KC_PSCR, MO(3)
+ ),
+ [_NUM] = LAYOUT(
+ _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______,
+ _______, KC_GRV, KC_SLSH, KC_LBRC, KC_LPRN, KC_MINS, KC_EQL, KC_RPRN, KC_RBRC, KC_BSLS, XXXXXXX, _______,
+ _______, KC_TILD, KC_QUES, KC_LCBR, XXXXXXX, KC_UNDS, KC_PLUS, XXXXXXX, KC_RCBR, KC_PIPE, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+ [_NAV] = LAYOUT(
+ _______, XXXXXXX, XXXXXXX, KC_PGUP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_UP, XXXXXXX, XXXXXXX, _______,
+ _______, XXXXXXX, KC_HOME, KC_PGDN, KC_END, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, _______,
+ _______, XXXXXXX, C(G(KC_LEFT)), XXXXXXX, C(G(KC_RGHT)), XXXXXXX, XXXXXXX, C(S(KC_TAB)), XXXXXXX, C(KC_TAB), XXXXXXX, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+ [_FN] = LAYOUT(
+ RESET, XXXXXXX, KC_F1, KC_F2, KC_F3, XXXXXXX, XXXXXXX, KC_F7, KC_F8, KC_F9, XXXXXXX, RESET,
+ _______, XXXXXXX, KC_F4, KC_F5, KC_F6, XXXXXXX, XXXXXXX, KC_F10, KC_F11, KC_F12, XXXXXXX, _______,
+ _______, XXXXXXX, KC_VOLD, XXXXXXX, KC_VOLU, XXXXXXX, XXXXXXX, KC_MPRV, KC_MPLY, KC_MNXT, XXXXXXX, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ )
+};
diff --git a/keyboards/ai03/orbit_x/keymaps/default/readme.md b/keyboards/ai03/orbit_x/keymaps/default/readme.md
new file mode 100644
index 0000000000..b106c969e1
--- /dev/null
+++ b/keyboards/ai03/orbit_x/keymaps/default/readme.md
@@ -0,0 +1,3 @@
+# The default keymap for orbit_x
+
+Basic keymap that works well in most cases.
\ No newline at end of file
diff --git a/keyboards/ai03/orbit_x/keymaps/via/keymap.c b/keyboards/ai03/orbit_x/keymaps/via/keymap.c
new file mode 100644
index 0000000000..90a8ef7663
--- /dev/null
+++ b/keyboards/ai03/orbit_x/keymaps/via/keymap.c
@@ -0,0 +1,59 @@
+/* Copyright 2020 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+ _BASE,
+ _NUM,
+ _NAV,
+ _FN
+};
+
+/*
+ L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
+ L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
+ L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
+ L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \
+*/
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Base */
+ [_BASE] = LAYOUT(
+ KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
+ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT,
+ MO(3), KC_TAB, KC_LGUI, KC_LALT, MO(2), KC_SPC, KC_SPC, MO(1), KC_TAB, KC_DEL, KC_PSCR, MO(3)
+ ),
+ [_NUM] = LAYOUT(
+ _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______,
+ _______, KC_GRV, KC_SLSH, KC_LBRC, KC_LPRN, KC_MINS, KC_EQL, KC_RPRN, KC_RBRC, KC_BSLS, XXXXXXX, _______,
+ _______, KC_TILD, KC_QUES, KC_LCBR, XXXXXXX, KC_UNDS, KC_PLUS, XXXXXXX, KC_RCBR, KC_PIPE, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+ [_NAV] = LAYOUT(
+ _______, XXXXXXX, XXXXXXX, KC_PGUP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_UP, XXXXXXX, XXXXXXX, _______,
+ _______, XXXXXXX, KC_HOME, KC_PGDN, KC_END, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, _______,
+ _______, XXXXXXX, C(G(KC_LEFT)), XXXXXXX, C(G(KC_RGHT)), XXXXXXX, XXXXXXX, C(S(KC_TAB)), XXXXXXX, C(KC_TAB), XXXXXXX, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+ [_FN] = LAYOUT(
+ RESET, XXXXXXX, KC_F1, KC_F2, KC_F3, XXXXXXX, XXXXXXX, KC_F7, KC_F8, KC_F9, XXXXXXX, RESET,
+ _______, XXXXXXX, KC_F4, KC_F5, KC_F6, XXXXXXX, XXXXXXX, KC_F10, KC_F11, KC_F12, XXXXXXX, _______,
+ _______, XXXXXXX, KC_VOLD, XXXXXXX, KC_VOLU, XXXXXXX, XXXXXXX, KC_MPRV, KC_MPLY, KC_MNXT, XXXXXXX, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ )
+};
diff --git a/keyboards/ai03/orbit_x/keymaps/via/readme.md b/keyboards/ai03/orbit_x/keymaps/via/readme.md
new file mode 100644
index 0000000000..ec31b557d4
--- /dev/null
+++ b/keyboards/ai03/orbit_x/keymaps/via/readme.md
@@ -0,0 +1,2 @@
+# The via keymap for orbit_x
+For use with VIA configurator only
diff --git a/keyboards/ai03/orbit_x/keymaps/via/rules.mk b/keyboards/ai03/orbit_x/keymaps/via/rules.mk
new file mode 100644
index 0000000000..036bd6d1c3
--- /dev/null
+++ b/keyboards/ai03/orbit_x/keymaps/via/rules.mk
@@ -0,0 +1 @@
+VIA_ENABLE = yes
\ No newline at end of file
diff --git a/keyboards/ai03/orbit_x/orbit_x.c b/keyboards/ai03/orbit_x/orbit_x.c
new file mode 100644
index 0000000000..3327261add
--- /dev/null
+++ b/keyboards/ai03/orbit_x/orbit_x.c
@@ -0,0 +1,18 @@
+/* Copyright 2019 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#include "orbit_x.h"
+
diff --git a/keyboards/ai03/orbit_x/orbit_x.h b/keyboards/ai03/orbit_x/orbit_x.h
new file mode 100644
index 0000000000..a1ae8304b2
--- /dev/null
+++ b/keyboards/ai03/orbit_x/orbit_x.h
@@ -0,0 +1,44 @@
+/* Copyright 2019 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+ L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
+ L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
+ L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
+ L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \
+) \
+{ \
+ { L00, L01, L02, L03, L04, L05 }, \
+ { L10, L11, L12, L13, L14, L15 }, \
+ { L20, L21, L22, L23, L24, L25 }, \
+ { L30, L31, L32, L33, L34, L35 }, \
+ { R00, R01, R02, R03, R04, R05 }, \
+ { R10, R11, R12, R13, R14, R15 }, \
+ { R20, R21, R22, R23, R24, R25 }, \
+ { R30, R31, R32, R33, R34, R35 }, \
+}
diff --git a/keyboards/ai03/orbit_x/readme.md b/keyboards/ai03/orbit_x/readme.md
new file mode 100644
index 0000000000..80bc6bbab8
--- /dev/null
+++ b/keyboards/ai03/orbit_x/readme.md
@@ -0,0 +1,15 @@
+# Orbit-X
+
+
+
+A compact high-end split keyboard
+
+* Keyboard Maintainer: [ai03](https://github.com/ai03-2725)
+* Hardware Supported: The Orbit-X keyboard PCB
+* Hardware Availability: Deskeys for official kit; open-source PCB [here](https://github.com/ai03-2725/Orbit/tree/master/OrbitX-PCB)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make ai03/orbit_x:via
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/ai03/orbit_x/rules.mk b/keyboards/ai03/orbit_x/rules.mk
new file mode 100644
index 0000000000..111ca910a9
--- /dev/null
+++ b/keyboards/ai03/orbit_x/rules.mk
@@ -0,0 +1,33 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = atmel-dfu
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes # Console for debug
+COMMAND_ENABLE = yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+MIDI_ENABLE = no # MIDI support
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no # Enable support for HD44780 based LCDs
+SPLIT_KEYBOARD = yes # Split keyboard
\ No newline at end of file