1
0
Fork 0

UART driver refactor (#11637)

This commit is contained in:
Ryan 2021-01-27 17:42:49 +11:00 committed by GitHub
parent be897cbc2f
commit 30b46fad57
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
12 changed files with 287 additions and 39 deletions

View file

@ -138,6 +138,7 @@
* [WS2812 Driver](ws2812_driver.md) * [WS2812 Driver](ws2812_driver.md)
* [EEPROM Driver](eeprom_driver.md) * [EEPROM Driver](eeprom_driver.md)
* ['serial' Driver](serial_driver.md) * ['serial' Driver](serial_driver.md)
* [UART Driver](uart_driver.md)
* [GPIO Controls](internals_gpio_control.md) * [GPIO Controls](internals_gpio_control.md)
* [Keyboard Guidelines](hardware_keyboard_guidelines.md) * [Keyboard Guidelines](hardware_keyboard_guidelines.md)

90
docs/uart_driver.md Normal file
View file

@ -0,0 +1,90 @@
# UART Driver
The UART drivers used in QMK have a set of common functions to allow portability between MCUs.
Currently, this driver does not support enabling hardware flow control (the `RTS` and `CTS` pins) if available, but may do so in future.
## AVR Configuration
No special setup is required - just connect the `RX` and `TX` pins of your UART device to the opposite pins on the MCU:
|MCU |`TX`|`RX`|`CTS`|`RTS`|
|-------------|----|----|-----|-----|
|ATmega16/32U2|`D3`|`D2`|`D7` |`D6` |
|ATmega16/32U4|`D3`|`D2`|`D5` |`B7` |
|AT90USB64/128|`D3`|`D2`|*n/a*|*n/a*|
|ATmega32A |`D1`|`D0`|*n/a*|*n/a*|
|ATmega328/P |`D1`|`D0`|*n/a*|*n/a*|
## ChibiOS/ARM Configuration
You'll need to determine which pins can be used for UART -- as an example, STM32 parts generally have multiple UART peripherals, labeled USART1, USART2, USART3 etc.
To enable UART, modify your board's `halconf.h` to enable the serial driver:
```c
#define HAL_USE_SERIAL TRUE
```
Then, modify your board's `mcuconf.h` to enable the peripheral you've chosen, for example:
```c
#undef STM32_SERIAL_USE_USART2
#define STM32_SERIAL_USE_USART2 TRUE
```
Configuration-wise, you'll need to set up the peripheral as per your MCU's datasheet -- the defaults match the pins for a Proton-C, i.e. STM32F303.
|`config.h` override |Description |Default Value|
|--------------------------|---------------------------------------------------------------|-------------|
|`#define SERIAL_DRIVER` |USART peripheral to use - USART1 -> `SD1`, USART2 -> `SD2` etc.|`SD1` |
|`#define SD1_TX_PIN` |The pin to use for TX |`A9` |
|`#define SD1_TX_PAL_MODE` |The alternate function mode for TX |`7` |
|`#define SD1_RX_PIN` |The pin to use for RX |`A10` |
|`#define SD1_RX_PAL_MODE` |The alternate function mode for RX |`7` |
|`#define SD1_CTS_PIN` |The pin to use for CTS |`A11` |
|`#define SD1_CTS_PAL_MODE`|The alternate function mode for CTS |`7` |
|`#define SD1_RTS_PIN` |The pin to use for RTS |`A12` |
|`#define SD1_RTS_PAL_MODE`|The alternate function mode for RTS |`7` |
## Functions
### `void uart_init(uint32_t baud)`
Initialize the UART driver. This function must be called only once, before any of the below functions can be called.
#### Arguments
- `uint32_t baud`
The baud rate to transmit and receive at. This may depend on the device you are communicating with. Common values are 1200, 2400, 4800, 9600, 19200, 38400, 57600, and 115200.
---
### `void uart_putchar(uint8_t c)`
Transmit a single byte.
#### Arguments
- `uint8_t c`
The byte (character) to send, from 0 to 255.
---
### `uint8_t uart_getchar(void)`
Receive a single byte.
#### Return Value
The byte read from the receive buffer.
---
### `bool uart_available(void)`
Return whether the receive buffer contains data. Call this function to determine if `uart_getchar()` will return meaningful data.
#### Return Value
`true` if the receive buffer length is non-zero.

View file

@ -1,5 +1,3 @@
// TODO: Teensy support(ATMega32u4/AT90USB128)
// Fixed for Arduino Duemilanove ATmega168p by Jun Wako
/* UART Example for Teensy USB Development Board /* UART Example for Teensy USB Development Board
* http://www.pjrc.com/teensy/ * http://www.pjrc.com/teensy/
* Copyright (c) 2009 PJRC.COM, LLC * Copyright (c) 2009 PJRC.COM, LLC
@ -31,22 +29,7 @@
#include "uart.h" #include "uart.h"
#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega168P__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__) #if defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__)
# define UDRn UDR0
# define UBRRnL UBRR0L
# define UCSRnA UCSR0A
# define UCSRnB UCSR0B
# define UCSRnC UCSR0C
# define U2Xn U2X0
# define RXENn RXEN0
# define TXENn TXEN0
# define RXCIEn RXCIE0
# define UCSZn1 UCSZ01
# define UCSZn0 UCSZ00
# define UDRIEn UDRIE0
# define USARTn_UDRE_vect USART_UDRE_vect
# define USARTn_RX_vect USART_RX_vect
#elif defined(__AVR_ATmega32U4__) || defined(__AVR_ATmega32U2__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__)
# define UDRn UDR1 # define UDRn UDR1
# define UBRRnL UBRR1L # define UBRRnL UBRR1L
# define UCSRnA UCSR1A # define UCSRnA UCSR1A
@ -76,6 +59,21 @@
# define UDRIEn UDRIE # define UDRIEn UDRIE
# define USARTn_UDRE_vect USART_UDRE_vect # define USARTn_UDRE_vect USART_UDRE_vect
# define USARTn_RX_vect USART_RX_vect # define USARTn_RX_vect USART_RX_vect
#elif defined(__AVR_ATmega328__) || defined(__AVR_ATmega328P__)
# define UDRn UDR0
# define UBRRnL UBRR0L
# define UCSRnA UCSR0A
# define UCSRnB UCSR0B
# define UCSRnC UCSR0C
# define U2Xn U2X0
# define RXENn RXEN0
# define TXENn TXEN0
# define RXCIEn RXCIE0
# define UCSZn1 UCSZ01
# define UCSZn0 UCSZ00
# define UDRIEn UDRIE0
# define USARTn_UDRE_vect USART_UDRE_vect
# define USARTn_RX_vect USART_RX_vect
#endif #endif
// These buffers may be any size from 2 to 256 bytes. // These buffers may be any size from 2 to 256 bytes.
@ -131,16 +129,16 @@ uint8_t uart_getchar(void) {
return c; return c;
} }
// Return the number of bytes waiting in the receive buffer. // Return whether the number of bytes waiting in the receive buffer is nonzero.
// Call this before uart_getchar() to check if it will need // Call this before uart_getchar() to check if it will need
// to wait for a byte to arrive. // to wait for a byte to arrive.
uint8_t uart_available(void) { bool uart_available(void) {
uint8_t head, tail; uint8_t head, tail;
head = rx_buffer_head; head = rx_buffer_head;
tail = rx_buffer_tail; tail = rx_buffer_tail;
if (head >= tail) return head - tail; if (head >= tail) return (head - tail) > 0;
return RX_BUFFER_SIZE + head - tail; return (RX_BUFFER_SIZE + head - tail) > 0;
} }
// Transmit Interrupt // Transmit Interrupt

34
drivers/avr/uart.h Normal file
View file

@ -0,0 +1,34 @@
/* UART Example for Teensy USB Development Board
* http://www.pjrc.com/teensy/
* Copyright (c) 2009 PJRC.COM, LLC
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#pragma once
#include <stdint.h>
void uart_init(uint32_t baud);
void uart_putchar(uint8_t c);
uint8_t uart_getchar(void);
bool uart_available(void);

59
drivers/chibios/uart.c Normal file
View file

@ -0,0 +1,59 @@
/* Copyright 2021
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*/
#include "uart.h"
#include "quantum.h"
static SerialConfig serialConfig = {
SERIAL_DEFAULT_BITRATE,
SD1_CR1,
SD1_CR2,
SD1_CR3
};
void uart_init(uint32_t baud) {
static bool is_initialised = false;
if (!is_initialised) {
is_initialised = true;
serialConfig.speed = baud;
#if defined(USE_GPIOV1)
palSetLineMode(SD1_TX_PIN, PAL_MODE_STM32_ALTERNATE_OPENDRAIN);
palSetLineMode(SD1_RX_PIN, PAL_MODE_STM32_ALTERNATE_OPENDRAIN);
#else
palSetLineMode(SD1_TX_PIN, PAL_MODE_ALTERNATE(SD1_TX_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
palSetLineMode(SD1_RX_PIN, PAL_MODE_ALTERNATE(SD1_RX_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
#endif
sdStart(&SERIAL_DRIVER, &serialConfig);
}
}
void uart_putchar(uint8_t c) {
sdPut(&SERIAL_DRIVER, c);
}
uint8_t uart_getchar(void) {
msg_t res = sdGet(&SERIAL_DRIVER);
return (uint8_t)res;
}
bool uart_available(void) {
return !sdGetWouldBlock(&SERIAL_DRIVER);
}

77
drivers/chibios/uart.h Normal file
View file

@ -0,0 +1,77 @@
/* Copyright 2021
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*/
#pragma once
#include <stdint.h>
#include <hal.h>
#ifndef SERIAL_DRIVER
# define SERIAL_DRIVER SD1
#endif
#ifndef SD1_TX_PIN
# define SD1_TX_PIN A9
#endif
#ifndef SD1_TX_PAL_MODE
# define SD1_TX_PAL_MODE 7
#endif
#ifndef SD1_RX_PIN
# define SD1_RX_PIN A10
#endif
#ifndef SD1_RX_PAL_MODE
# define SD1_RX_PAL_MODE 7
#endif
#ifndef SD1_CTS_PIN
# define SD1_CTS_PIN A11
#endif
#ifndef SD1_CTS_PAL_MODE
# define SD1_CTS_PAL_MODE 7
#endif
#ifndef SD1_RTS_PIN
# define SD1_RTS_PIN A12
#endif
#ifndef SD1_RTS_PAL_MODE
# define SD1_RTS_PAL_MODE 7
#endif
#ifndef SD1_CR1
# define SD1_CR1 0
#endif
#ifndef SD1_CR2
# define SD1_CR2 0
#endif
#ifndef SD1_CR3
# define SD1_CR3 0
#endif
void uart_init(uint32_t baud);
void uart_putchar(uint8_t c);
uint8_t uart_getchar(void);
bool uart_available(void);

View file

@ -29,7 +29,7 @@ DYNAMIC_MACRO_ENABLE = yes
UART_DEBUG = no UART_DEBUG = no
SRC += matrix.c SRC += matrix.c
QUANTUM_LIB_SRC += $(COMMON_DIR)/uart.c \ QUANTUM_LIB_SRC += uart.c \
spi_master.c spi_master.c
OPT_DEFS += -DSLEEP_LED_ENABLE # we need our own sleep callbacks to turn of WS2812 LEDs OPT_DEFS += -DSLEEP_LED_ENABLE # we need our own sleep callbacks to turn of WS2812 LEDs

View file

@ -27,6 +27,7 @@ This will require a new communication protocol, as the current one is limited.
*/ */
#include "remote_kb.h" #include "remote_kb.h"
#include "uart.h"
uint8_t uint8_t
msg[UART_MSG_LEN], msg[UART_MSG_LEN],

View file

@ -16,7 +16,6 @@
#pragma once #pragma once
#include "quantum.h" #include "quantum.h"
#include "tmk_core/common/uart.h"
#define SERIAL_UART_BAUD 153600 //low error rate for 32u4 @ 16MHz #define SERIAL_UART_BAUD 153600 //low error rate for 32u4 @ 16MHz

View file

@ -1,9 +1,6 @@
# MCU name # MCU name
MCU = atmega32u4 MCU = atmega32u4
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Bootloader selection # Bootloader selection
BOOTLOADER = atmel-dfu BOOTLOADER = atmel-dfu
@ -31,5 +28,5 @@ CUSTOM_MATRIX = lite # Lite custom matrix
SRC += matrix.c \ SRC += matrix.c \
bitc_led.c \ bitc_led.c \
big_led.c \ big_led.c \
remote_kb.c \ remote_kb.c
tmk_core/common/uart.c QUANTUM_LIB_SRC += uart.c

View file

@ -212,8 +212,8 @@
/* /*
* SERIAL driver system settings. * SERIAL driver system settings.
*/ */
#define STM32_SERIAL_USE_USART1 FALSE #define STM32_SERIAL_USE_USART1 TRUE
#define STM32_SERIAL_USE_USART2 TRUE #define STM32_SERIAL_USE_USART2 FALSE
#define STM32_SERIAL_USE_USART3 FALSE #define STM32_SERIAL_USE_USART3 FALSE
#define STM32_SERIAL_USE_UART4 FALSE #define STM32_SERIAL_USE_UART4 FALSE
#define STM32_SERIAL_USE_UART5 FALSE #define STM32_SERIAL_USE_UART5 FALSE

View file

@ -1,8 +0,0 @@
#pragma once
#include <stdint.h>
void uart_init(uint32_t baud);
void uart_putchar(uint8_t c);
uint8_t uart_getchar(void);
uint8_t uart_available(void);