1
0
Fork 0

Move the 1 second delay to led_matrix_init

This commit is contained in:
skullY 2019-01-27 16:28:11 -08:00 committed by skullydazed
parent 24df54b807
commit 32116f1a45

View file

@ -82,7 +82,7 @@ void eeconfig_update_led_matrix_default(void) {
eeconfig_update_led_matrix(led_matrix_config.raw);
}
void eeconfig_debug_led_matrix(void) {
dprintf("led_matrix_config eprom\n");
dprintf("led_matrix_config eeprom\n");
dprintf("led_matrix_config.enable = %d\n", led_matrix_config.enable);
dprintf("led_matrix_config.mode = %d\n", led_matrix_config.mode);
dprintf("led_matrix_config.val = %d\n", led_matrix_config.val);
@ -176,21 +176,12 @@ void led_matrix_task(void) {
return;
}
// delay 1 second before driving LEDs or doing anything else
// FIXME: Can't we use wait_ms() here?
static uint8_t startup_tick = 0;
if (startup_tick < 20) {
startup_tick++;
return;
}
g_tick++;
if (g_any_key_hit < 0xFFFFFFFF) {
g_any_key_hit++;
}
/* FIXME: WHY YOU COMMENT OUT?!
for (int led = 0; led < LED_DRIVER_LED_COUNT; led++) {
if (g_key_hit[led] < 255) {
if (g_key_hit[led] == 254)
@ -199,12 +190,6 @@ void led_matrix_task(void) {
}
}
// Factory default magic value
if (led_matrix_config.mode == 255) {
led_matrix_uniform_brightness();
return;
}
*/
// Ideally we would also stop sending zeros to the LED driver PWM buffers
// while suspended and just do a software shutdown. This is a cheap hack for now.
bool suspend_backlight = ((g_suspend_state && LED_DISABLE_WHEN_USB_SUSPENDED) ||
@ -263,25 +248,28 @@ void led_matrix_indicators_user(void) {}
void led_matrix_init(void) {
led_matrix_driver.init();
// TODO: put the 1 second startup delay here?
// Wait a second for the driver to finish initializing
wait_ms(1000);
// clear the key hits
for (int led=0; led<LED_DRIVER_LED_COUNT; led++) {
g_key_hit[led] = 255;
}
if (!eeconfig_is_enabled()) {
dprintf("led_matrix_init_drivers eeconfig is not enabled.\n");
eeconfig_init();
eeconfig_update_led_matrix_default();
}
led_matrix_config.raw = eeconfig_read_led_matrix();
if (!led_matrix_config.mode) {
dprintf("led_matrix_init_drivers led_matrix_config.mode = 0. Write default values to EEPROM.\n");
eeconfig_update_led_matrix_default();
led_matrix_config.raw = eeconfig_read_led_matrix();
}
eeconfig_debug_led_matrix(); // display current eeprom values
}