1
0
Fork 0

UT47 layout (#2791)

* Add new project files for UT47

* Copy over keymap and related files

* Add LED_controls.ino

* Add README instructions

* Attempt sending press byte data

* Disable mousekeys

* Enable sending serial data to LED controller

* Update LED mode names

* Remove extra file

* Add LED enable flag

* Update READMEs with more info

* Credit original author

* Update copyrights

* Update docs

* Changed based on review

* Move layout screenshot to Imgur

* Append to src

* Enable mousekeys to fix bad keycodes

* Additional changes based on feedback

* Fix fn layer keys
This commit is contained in:
Carlos 2018-04-24 14:19:04 -06:00 committed by Drashna Jaelre
parent 1feb42a108
commit 32446eeeb6
11 changed files with 1095 additions and 0 deletions

View file

@ -0,0 +1,420 @@
#include <FastGPIO.h>
#include <TimerOne.h>
int iByte;
byte col = 0;
byte leds[12][4];
byte pass = 1;
int fadecount = 1;
const int fadelimit = 3000;
const int fadelimitshort = 1000;
byte mode = 4;
byte brightness = 2;
boolean changemode = 0;
int rain = 0;
const int rainlimit = 5000;
const int rainfade = 5000;
byte rx = 0;
byte ry = 0;
// pin[xx] on led matrix connected to nn on Arduino (-1 is dummy to make array start at pos 1)
int pins[17] = {
-1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 16, 14, 15, 18, 19, 20, 21
};
// col[xx] of leds = pin yy on led matrix
int cols[12] = {
pins[8], pins[7], pins[6], pins[5], pins[9], pins[10], pins[11], pins[12], pins[13], pins[14], pins[15], pins[16]
};
// row[xx] of leds = pin yy on led matrix
int rows[4] = {
pins[1], pins[2], pins[3], pins[4]
};
#define DELAY 0
extern byte leds[12][4];
void setup() {
Serial1.begin(9600);
setupLeds();
for (int s = 0; s < 5; s++) {
for ( int r = 1; r < 9; r++) {
delayMicroseconds(65000);
delayMicroseconds(65000);
for (int j = 0; j < 4; j++) {
for (int i = 0; i < 12; i++) {
leds[i][j] = 1;
for (int p = 0; p < 25; p++) {
}
leds[i][j] = r;
}
}
}
for ( int r = 9; r > 0; r--) {
delayMicroseconds(65000);
delayMicroseconds(65000);
delayMicroseconds(65000);
for (int j = 0; j < 4; j++) {
for (int i = 0; i < 12; i++) {
leds[i][j] = 1;
for (int p = 0; p < 25; p++) {
}
leds[i][j] = r;
}
}
}
}
}
void loop() {
switch (mode) {
case 0:
//Blacklight
for (int i = 0; i < 12; i++) {
for (int j = 0; j < 4; j++) {
leds[i][j] = brightness;
}
}
checkserial();
break;
case 1:
//Breathing
for ( int r = 1; r < 9; r++) {
checkserial();
if (changemode == 0) {
delayMicroseconds(65000);
delayMicroseconds(65000);
delayMicroseconds(65000);
for (int j = 0; j < 4; j++) {
for (int i = 0; i < 12; i++) {
leds[i][j] = 1;
for (int p = 0; p < 25; p++) {
}
leds[i][j] = r;
}
}
}
else {
break;
}
}
for ( int r = 9; r > 0; r--) {
checkserial();
if (changemode == 0) {
delayMicroseconds(65000);
delayMicroseconds(65000);
delayMicroseconds(65000);
delayMicroseconds(65000);
for (int j = 0; j < 4; j++) {
for (int i = 0; i < 12; i++) {
leds[i][j] = 1;
for (int p = 0; p < 25; p++) {
}
leds[i][j] = r;
}
}
}
else {
break;
}
}
for ( int r = 1; r < 30; r++) {
checkserial();
if (changemode == 0) {
delayMicroseconds(65000);
delayMicroseconds(65000);
}
else {
break;
}
}
break;
case 2:
//Random
leds[random(12)][random(4)] = random(8);
delayMicroseconds(10000);
checkserial();
break;
case 3:
//Rain
rain++;
if (rain > rainlimit) {
rain = 0;
rx = random(12);
ry = random(4);
if (leds[rx][ry] == 0) {
leds[rx][ry] = 18;
}
}
fadecount++;
if (fadecount > rainfade) {
fadecount = 1;
for (int i = 0; i < 12; i++) {
for (int j = 0; j < 4; j++) {
if (leds[i][j] > 0) {
leds[i][j] = leds[i][j] - 1;
}
}
}
}
checkserial();
break;
case 4:
//Reactive
fadecount++;
if (fadecount > fadelimit) {
fadecount = 1;
for (int i = 0; i < 12; i++) {
for (int j = 0; j < 4; j++) {
if (leds[i][j] > 0) {
leds[i][j] = leds[i][j] - 1;
}
}
}
}
checkserial();
break;
case 5:
//Reactive Target
fadecount++;
if (fadecount > fadelimitshort) {
fadecount = 1;
for (int i = 0; i < 12; i++) {
for (int j = 0; j < 4; j++) {
if (leds[i][j] > 0) {
leds[i][j] = leds[i][j] - 1;
}
}
}
}
checkserial();
break;
default:
mode = 0;
break;
}
changemode = 0;
}
void checkserial() {
if (Serial1.available() > 0) {
iByte = Serial1.read();
if (iByte == 100) {
brightness++;
if (brightness > 9) {
brightness = 1;
}
}
if (iByte == 101) {
mode++;
}
if (iByte < 100) {
if (mode == 4) {
byte row = iByte / 16;
byte col = iByte % 16;
leds[col][row] = 18;
}
if (mode == 5) {
byte row = iByte / 16;
byte col = iByte % 16;
for (byte i = 0; i < 12; i++) {
leds[i][row] = 18;
}
for (byte p = 0; p < 4; p++) {
leds[col][p] = 18;
}
}
}
}
}
void setupLeds() {
// sets the pins as output
FastGPIO::Pin<2>::setOutputLow();
FastGPIO::Pin<3>::setOutputLow();
FastGPIO::Pin<4>::setOutputLow();
FastGPIO::Pin<5>::setOutputLow();
FastGPIO::Pin<6>::setOutputLow();
FastGPIO::Pin<7>::setOutputLow();
FastGPIO::Pin<8>::setOutputLow();
FastGPIO::Pin<9>::setOutputLow();
FastGPIO::Pin<10>::setOutputLow();
FastGPIO::Pin<16>::setOutputLow();
FastGPIO::Pin<14>::setOutputLow();
FastGPIO::Pin<15>::setOutputLow();
FastGPIO::Pin<18>::setOutputLow();
FastGPIO::Pin<19>::setOutputLow();
FastGPIO::Pin<20>::setOutputLow();
FastGPIO::Pin<21>::setOutputLow();
// set up Cols
FastGPIO::Pin<6>::setOutputValueLow();
FastGPIO::Pin<7>::setOutputValueLow();
FastGPIO::Pin<8>::setOutputValueLow();
FastGPIO::Pin<9>::setOutputValueLow();
FastGPIO::Pin<10>::setOutputValueLow();
FastGPIO::Pin<16>::setOutputValueLow();
FastGPIO::Pin<14>::setOutputValueLow();
FastGPIO::Pin<15>::setOutputValueLow();
FastGPIO::Pin<18>::setOutputValueLow();
FastGPIO::Pin<19>::setOutputValueLow();
FastGPIO::Pin<20>::setOutputValueLow();
FastGPIO::Pin<21>::setOutputValueLow();
// set up Rows
FastGPIO::Pin<2>::setOutputValueLow();
FastGPIO::Pin<3>::setOutputValueLow();
FastGPIO::Pin<4>::setOutputValueLow();
FastGPIO::Pin<5>::setOutputValueLow();
clearLeds();
Timer1.initialize(25);
Timer1.attachInterrupt(display);
}
void clearLeds() {
// Clear display array
for (int i = 0; i < 12; i++) {
for (int j = 0; j < 4; j++) {
leds[i][j] = 0;
}
}
}
void onLeds() {
// Clear display array
for (int i = 0; i < 12; i++) {
for (int j = 0; j < 4; j++) {
leds[i][j] = 7;
}
}
}
// Interrupt routine
void display() {
switch (col) { // Turn whole previous column off
case 0:
FastGPIO::Pin<6>::setOutputValueLow();
break;
case 1:
FastGPIO::Pin<7>::setOutputValueLow();
break;
case 2:
FastGPIO::Pin<8>::setOutputValueLow();
break;
case 3:
FastGPIO::Pin<9>::setOutputValueLow();
break;
case 4:
FastGPIO::Pin<10>::setOutputValueLow();
break;
case 5:
FastGPIO::Pin<16>::setOutputValueLow();
break;
case 6:
FastGPIO::Pin<14>::setOutputValueLow();
break;
case 7:
FastGPIO::Pin<15>::setOutputValueLow();
break;
case 8:
FastGPIO::Pin<18>::setOutputValueLow();
break;
case 9:
FastGPIO::Pin<19>::setOutputValueLow();
break;
case 10:
FastGPIO::Pin<20>::setOutputValueLow();
break;
case 11:
FastGPIO::Pin<21>::setOutputValueLow();
break;
}
col++;
if (col == 12) {
col = 0;
pass++;
if (pass > 8) {
pass = 1;
}
}
for (int row = 0; row < 4; row++) {
if (leds[col][row] > pass) {
switch (row) { // Turn on this led
case 0:
FastGPIO::Pin<2>::setOutputValueLow();
break;
case 1:
FastGPIO::Pin<3>::setOutputValueLow();
break;
case 2:
FastGPIO::Pin<4>::setOutputValueLow();
break;
case 3:
FastGPIO::Pin<5>::setOutputValueLow();
break;
}
}
else {
switch (row) { // Turn off this led
case 0:
FastGPIO::Pin<2>::setOutputValueHigh();
break;
case 1:
FastGPIO::Pin<3>::setOutputValueHigh();
break;
case 2:
FastGPIO::Pin<4>::setOutputValueHigh();
break;
case 3:
FastGPIO::Pin<5>::setOutputValueHigh();
break;
}
}
}
switch (col) { // Turn column on
case 0:
FastGPIO::Pin<6>::setOutputValueHigh();
break;
case 1:
FastGPIO::Pin<7>::setOutputValueHigh();
break;
case 2:
FastGPIO::Pin<8>::setOutputValueHigh();
break;
case 3:
FastGPIO::Pin<9>::setOutputValueHigh();
break;
case 4:
FastGPIO::Pin<10>::setOutputValueHigh();
break;
case 5:
FastGPIO::Pin<16>::setOutputValueHigh();
break;
case 6:
FastGPIO::Pin<14>::setOutputValueHigh();
break;
case 7:
FastGPIO::Pin<15>::setOutputValueHigh();
break;
case 8:
FastGPIO::Pin<18>::setOutputValueHigh();
break;
case 9:
FastGPIO::Pin<19>::setOutputValueHigh();
break;
case 10:
FastGPIO::Pin<20>::setOutputValueHigh();
break;
case 11:
FastGPIO::Pin<21>::setOutputValueHigh();
break;
}
}

87
keyboards/ut47/config.h Normal file
View file

@ -0,0 +1,87 @@
/*
Copyright 2018 Carlos Filoteo
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x0000
#define DEVICE_VER 0x0001
#define MANUFACTURER 40percent.club
#define PRODUCT ut47
#define DESCRIPTION An awesome 40% keyboard
/* key matrix size */
#define MATRIX_ROWS 4
#define MATRIX_COLS 12
#define MATRIX_ROW_PINS { D1, D0, D4, C6 }
#define MATRIX_COL_PINS { D7, E6, B4, B5, B6, B2, B3, B1, F7, F6, F5, F4 }
#define UNUSED_PINS
/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
#define DIODE_DIRECTION COL2ROW
// #define BACKLIGHT_PIN B7
// #define BACKLIGHT_BREATHING
// #define BACKLIGHT_LEVELS 3
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* key combination for magic key command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* Enable GNAP matrix serial output */
#define GNAP_ENABLE
/* USART configuration */
#ifdef __AVR_ATmega32U4__
# define SERIAL_UART_BAUD 9600
# define SERIAL_UART_DATA UDR1
# define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1)
# define SERIAL_UART_RXD_VECT USART1_RX_vect
# define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
# define SERIAL_UART_INIT() do { \
/* baud rate */ \
UBRR1L = SERIAL_UART_UBRR; \
/* baud rate */ \
UBRR1H = SERIAL_UART_UBRR >> 8; \
/* enable TX */ \
UCSR1B = _BV(TXEN1); \
/* 8-bit data */ \
UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
sei(); \
} while(0)
# else
# error "USART configuration is needed."
#endif
#endif

View file

@ -0,0 +1,24 @@
/* Copyright 2018 Carlos Filoteo
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "config_common.h"
// place overrides here
#endif

View file

@ -0,0 +1,88 @@
/* Copyright 2018 Carlos Filoteo
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
#ifdef LED_ENABLE
#include "protocol/serial.h"
#endif
#define _______ KC_TRNS
#define LT3_TAB LT(3, KC_TAB)
#define MT_RSFT_ENT MT(MOD_RSFT, KC_ENT)
enum custom_keycodes {
LED_TOG = SAFE_RANGE,
LED_CHG
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
LAYOUT(
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
LT3_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MT_RSFT_ENT,
KC_LCTL, KC_LALT, KC_LGUI, KC_APP, MO(2), KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT
),
LAYOUT(
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DELETE,
_______, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS,
_______, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, _______,
_______, _______, _______, KC_CAPS, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END
),
LAYOUT(
KC_FN6, KC_FN7, KC_FN8, KC_FN9, KC_FN10, KC_FN11, KC_FN12, KC_FN13, KC_FN14, KC_FN15, KC_FN16, KC_DELETE,
_______, _______, _______, _______, _______, _______, _______, KC_FN17, KC_FN18, KC_FN19, KC_FN20, KC_FN21,
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, _______,
_______, _______, _______, KC_CAPS, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END
),
LAYOUT( /* Tab */
KC_ESC, KC_CALC, KC_WHOM, KC_MAIL, KC_MYCM, _______, _______, _______, _______, _______, KC_PSCR, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, LED_TOG, LED_CHG, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R
),
};
//LED keymap functions
#ifdef LED_ENABLE
void led_chmode(void) {
serial_send(101);
}
void led_toggle(void) {
serial_send(100);
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if (record->event.pressed) {
switch(keycode) {
case LED_TOG:
#ifdef LED_ENABLE
led_toggle();
#endif
return false;
case LED_CHG:
#ifdef LED_ENABLE
led_chmode();
#endif
return false;
}
}
return true;
};
#endif

View file

@ -0,0 +1,19 @@
# UT47 default keymap
![UT47 layout image](https://i.imgur.com/Tsz5qsF.png)
[KLE](http://www.keyboard-layout-editor.com/##@@_y:0%3B&=Esc&=Q&=W&=E&=R&=T&=Y&=U&=I&=O&=P&_w:1.5%3B&=Back%20Space&_x:0.25&a:4&f:4&w:4&h:4&d:true%3B&=%3Cb%3EGNAP!%3C%2F%2Fb%3E%3Cp%3E%3Cp%3EMinimum%20stagger%3Cp%3E47%20key%20layout%3B&@_a:7&f:3&w:1.25%3B&=Tab&=A&=S&=D&=F&=G&=H&=J&=K&=L&=%2F%3B&_w:1.25%3B&=%27%3B&@_w:1.5%3B&=Shift&=Z&=X&=C&=V&=B&=N&=M&=,&=.&=%2F%2F&=Return%3B&@=Ctrl&=Alt&=Super&=Menu&_w:1.25%3B&=%2F&dArr%2F%3B&_w:2%3B&=&_w:1.25%3B&=%2F&uArr%2F%3B&=%2F&larr%2F%3B&=%2F&darr%2F%3B&=%2F&uarr%2F%3B&=%2F&rarr%2F%3B%3B&=undefined)
### LED Controls
Use <kbd>TAB</kbd>+<kbd>Z</kbd> to cycle through brightness (8 steps)
Use <kbd>TAB</kbd>+<kbd>X</kbd> to cycle through the following LED modes:
- solid
- breathing
- random
- rain
- reactive
- poptang
- off

38
keyboards/ut47/led.c Normal file
View file

@ -0,0 +1,38 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <avr/io.h>
#include "stdint.h"
#include "led.h"
void led_set(uint8_t usb_led)
{
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
// output low
DDRB |= (1<<0);
PORTB &= ~(1<<0);
DDRD |= (1<<5);
PORTD &= ~(1<<5);
} else {
// Hi-Z
DDRB &= ~(1<<0);
PORTB &= ~(1<<0);
DDRD &= ~(1<<5);
PORTD &= ~(1<<5);
}
}

209
keyboards/ut47/matrix.c Normal file
View file

@ -0,0 +1,209 @@
/*
Copyright 2018 Carlos Filoteo
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
* scan matrix
*/
#include <stdint.h>
#include <stdbool.h>
#include <avr/io.h>
#include <util/delay.h>
#include "print.h"
#include "debug.h"
#include "util.h"
#include "matrix.h"
#include "protocol/serial.h"
#ifndef DEBOUNCE
# define DEBOUNCE 5
#endif
static uint8_t debouncing = DEBOUNCE;
/* matrix state(1:on, 0:off) */
static matrix_row_t matrix[MATRIX_ROWS];
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
static matrix_row_t read_cols(void);
static void init_cols(void);
static void unselect_rows(void);
static void select_row(uint8_t row);
inline
uint8_t matrix_rows(void)
{
return MATRIX_ROWS;
}
inline
uint8_t matrix_cols(void)
{
return MATRIX_COLS;
}
void matrix_init(void)
{
// initialize row and col
unselect_rows();
init_cols();
// initialize matrix state: all keys off
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
matrix[i] = 0;
matrix_debouncing[i] = 0;
}
serial_init();
}
uint8_t matrix_scan(void)
{
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
select_row(i);
_delay_us(30); // without this wait read unstable value.
matrix_row_t cols = read_cols();
if (matrix_debouncing[i] != cols) {
matrix_debouncing[i] = cols;
if (debouncing) {
debug("bounce!: "); debug_hex(debouncing); debug("\n");
}
debouncing = DEBOUNCE;
}
unselect_rows();
}
if (debouncing) {
if (--debouncing) {
_delay_ms(1);
} else {
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
matrix[i] = matrix_debouncing[i];
}
}
}
return 1;
}
bool matrix_is_modified(void)
{
if (debouncing) return false;
return true;
}
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
return (matrix[row] & ((matrix_row_t)1<<col));
}
inline
matrix_row_t matrix_get_row(uint8_t row)
{
return matrix[row];
}
void matrix_print(void)
{
print("\nr/c 0123456789ABCDEF\n");
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
phex(row); print(": ");
pbin_reverse16(matrix_get_row(row));
print("\n");
}
}
uint8_t matrix_key_count(void)
{
uint8_t count = 0;
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
count += bitpop16(matrix[i]);
}
return count;
}
/* Column pin configuration
* col: 0 1 2 3 4 5 6 7 8 9 10 11
* pin: D7 E6 B4 B5 B6 B2 B3 B1 F7 F6 F5 F4
*/
static void init_cols(void)
{
// Input with pull-up(DDR:0, PORT:1)
DDRF &= ~(1<<4 | 1<<5 | 1<<6 | 1<<7);
PORTF |= (1<<4 | 1<<5 | 1<<6 | 1<<7);
DDRE &= ~(1<<6);
PORTE |= (1<<6);
DDRD &= ~(1<<7);
PORTD |= (1<<7);
DDRB &= ~(1<<1 | 1<<2 | 1<<3 | 1<<4 | 1<<5 | 1<<6);
PORTB |= (1<<1 | 1<<2 | 1<<3 | 1<<4 | 1<<5 | 1<<6);
}
static matrix_row_t read_cols(void)
{
return (PIND&(1<<7) ? 0 : (1<<0)) |
(PINE&(1<<6) ? 0 : (1<<1)) |
(PINB&(1<<4) ? 0 : (1<<2)) |
(PINB&(1<<5) ? 0 : (1<<3)) |
(PINB&(1<<6) ? 0 : (1<<4)) |
(PINB&(1<<2) ? 0 : (1<<5)) |
(PINB&(1<<3) ? 0 : (1<<6)) |
(PINB&(1<<1) ? 0 : (1<<7)) |
(PINF&(1<<7) ? 0 : (1<<8)) |
(PINF&(1<<6) ? 0 : (1<<9)) |
(PINF&(1<<5) ? 0 : (1<<10)) |
(PINF&(1<<4) ? 0 : (1<<11));
}
/* Row pin configuration
* row: 0 1 2 3
* pin: D1 D0 D4 C6
*/
static void unselect_rows(void)
{
// Hi-Z(DDR:0, PORT:0) to unselect
DDRD &= ~0b00010011;
PORTD &= ~0b00010011;
DDRC &= ~0b01000000;
PORTC &= ~0b01000000;
}
static void select_row(uint8_t row)
{
// Output low(DDR:1, PORT:0) to select
switch (row) {
case 0:
DDRD |= (1<<1);
PORTD &= ~(1<<1);
break;
case 1:
DDRD |= (1<<0);
PORTD &= ~(1<<0);
break;
case 2:
DDRD |= (1<<4);
PORTD &= ~(1<<4);
break;
case 3:
DDRC |= (1<<6);
PORTC &= ~(1<<6);
break;
}
}

41
keyboards/ut47/readme.md Normal file
View file

@ -0,0 +1,41 @@
# ut47
![ut47](https://i.imgur.com/ZDKZQaj.jpg)
Somewhere between ortholinear and standard offset. Created to have all the same functions on a Planck in a keyboard but with a more conventional keyboard row stagger.
Keyboard Maintainer: [filoxo](https://github.com/filoxo), [network_operations]
Hardware Supported: [PCB design](http://www.40percent.club/2016/10/gnap-20-plateless.html), Arduino Pro Micro
Hardware Availability: [How to order](http://www.40percent.club/2017/03/ordering-pcb.html)
### Instructions
To flash the UT47 without LEDs (single controller), run:
make ut47:default
To enable the UT47 LEDs (dual controller), run this for the main controller:
make ut47:default LED_ENABLE=yes
Or you can add `LED_ENABLE = yes` to *rules.mk*
And then flash [LED_controls.ino](LED_controls.ino) to the second controller using [Arduino IDE](https://www.arduino.cc/en/Main/Software) or similar. NOTE: Arduino IDE will require importing additional libraries to compile.
<small>The reason this is an "opt-in" feature is to prevent sending serial communication over the pin, in case it ends up being used for something else (like RGB underglow).</small>
### Layout
Go to the [default layout README](keymaps/default/readme.md) for more information.
### Additional info
Credit: Forked from [di0ib TMK version](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/gnap)
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
### Build Guide
[u/network_operations' build guide thread](https://www.reddit.com/r/MechanicalKeyboards/comments/7wqktu/gnap_the_cheap_40/)

70
keyboards/ut47/rules.mk Normal file
View file

@ -0,0 +1,70 @@
# MCU name
#MCU = at90usb1286
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Bootloader
BOOTLOADER = caterina
# custom matrix setup
CUSTOM_MATRIX = yes
SRC += matrix.c protocol/serial_uart.c
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
ifeq ($(strip $(LED_ENABLE)), yes)
OPT_DEFS += -DLED_ENABLE
SRC += led.c
endif

50
keyboards/ut47/ut47.c Normal file
View file

@ -0,0 +1,50 @@
/* Copyright 2018 Carlos Filoteo
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "ut47.h"
#ifdef LED_ENABLE
#include "protocol/serial.h"
#endif
void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
matrix_init_user();
}
void matrix_scan_kb(void) {
// put your looping keyboard code here
// runs every cycle (a lot)
matrix_scan_user();
}
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
// put your per-action keyboard code here
// runs for every action, just before processing by the firmware
if (record->event.pressed) {
#ifdef LED_ENABLE
serial_send((record->event.key.row*16)+record->event.key.col);
#endif
}
return process_record_user(keycode, record);
}
void led_set_kb(uint8_t usb_led) {
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
led_set_user(usb_led);
}

49
keyboards/ut47/ut47.h Normal file
View file

@ -0,0 +1,49 @@
/* Copyright 2018 Carlos Filoteo
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef UT47_H
#define UT47_H
#include "quantum.h"
#define LAYOUT( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, \
K30, K31, K32, K33, K34, K35, K37, K38, K39, K3a, K3b \
) \
{ \
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b }, \
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b }, \
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b }, \
{ K30, K31, K32, K33, K34, K35, K37, K38, K39, K3a, K3b } \
}
#define LAYOUT_kc( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, \
K30, K31, K32, K33, K34, K35, K37, K38, K39, K3a, K3b \
) \
LAYOUT( \
KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0a, KC_##K0b, \
KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1a, KC_##K1b, \
KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2a, KC_##K2b, \
KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K37, KC_##K38, KC_##K39, KC_##K3a, KC_##K3b \
)
#define LAYOUT_kc_ut47 LAYOUT_kc
#endif