1
0
Fork 0

[Keyboard] infinity81 (#16387)

This commit is contained in:
peepeetee 2022-02-22 01:12:18 +08:00 committed by GitHub
parent 83b9483045
commit 3290377918
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
8 changed files with 321 additions and 0 deletions

View file

@ -0,0 +1,126 @@
// Copyright 2022 peepeetee (@peepeetee)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xADA0
#define PRODUCT_ID 0x0081
#define DEVICE_VER 0x0001
#define MANUFACTURER Ada
#define PRODUCT infinity81
/* key matrix size */
#define MATRIX_ROWS 6
#define MATRIX_COLS 15
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { B3, B2, B1, B0, F6, B7 }
#define MATRIX_COL_PINS { D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, F5, F1, F4 }
#define UNUSED_PINS
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
//#define LED_NUM_LOCK_PIN B0
//#define LED_CAPS_LOCK_PIN B1
//#define LED_SCROLL_LOCK_PIN B2
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
//#define BACKLIGHT_PIN B7
//#define BACKLIGHT_LEVELS 3
//#define BACKLIGHT_BREATHING
#define RGB_DI_PIN D0
#ifdef RGB_DI_PIN
# define RGBLED_NUM 107
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
#define RGBLIGHT_EFFECT_SNAKE
#define RGBLIGHT_EFFECT_KNIGHT
#define RGBLIGHT_EFFECT_CHRISTMAS
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
#endif
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
* This is useful for the Windows task manager shortcut (ctrl+shift+esc).
*/
//#define GRAVE_ESC_CTRL_OVERRIDE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
/* disable these deprecated features by default */
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION
/* Bootmagic Lite key configuration */
//#define BOOTMAGIC_LITE_ROW 0
//#define BOOTMAGIC_LITE_COLUMN 0

View file

@ -0,0 +1,4 @@
// Copyright 2022 peepeetee (@peepeetee)
// SPDX-License-Identifier: GPL-2.0-or-later
#include "infinity81.h"

View file

@ -0,0 +1,30 @@
// Copyright 2022 peepeetee (@peepeetee)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#include "quantum.h"
/* This is a shortcut to help you visually see your layout.
*
* The first section contains all of the arguments representing the physical
* layout of the board and position of the keys.
*
* The second converts the arguments into a two-dimensional array which
* represents the switch matrix.
*/
#define LAYOUT( \
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, \
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, \
K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, \
K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K413, K414, \
K500, K501, K502, K505, K510, K511, K512, K513, K514 \
) { \
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, KC_NO, KC_NO }, \
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 }, \
{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, K314 }, \
{ K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, KC_NO, K413, K414 }, \
{ K500, K501, K502, KC_NO, KC_NO, K505, KC_NO, KC_NO, KC_NO, KC_NO, K510, K511, K512, K513, K514 } \
}

View file

@ -0,0 +1,92 @@
{
"keyboard_name": "infinity81",
"url": "",
"maintainer": "qmk",
"layouts": {
"LAYOUT": {
"layout": [
{ "label": "K00 (B3,D1)", "x": 0, "y": 0 },
{ "label": "K01 (B3,D2)", "x": 1.25, "y": 0 },
{ "label": "K02 (B3,D3)", "x": 2.25, "y": 0 },
{ "label": "K03 (B3,D5)", "x": 3.25, "y": 0 },
{ "label": "K04 (B3,D4)", "x": 4.25, "y": 0 },
{ "label": "K05 (B3,D6)", "x": 5.5, "y": 0 },
{ "label": "K06 (B3,D7)", "x": 6.5, "y": 0 },
{ "label": "K07 (B3,B4)", "x": 7.5, "y": 0 },
{ "label": "K08 (B3,B5)", "x": 8.5, "y": 0 },
{ "label": "K09 (B3,B6)", "x": 9.75, "y": 0 },
{ "label": "K0A (B3,C6)", "x": 10.75, "y": 0 },
{ "label": "K0B (B3,C7)", "x": 11.75, "y": 0 },
{ "label": "K0C (B3,F5)", "x": 12.75, "y": 0 },
{ "label": "K10 (B2,D1)", "x": 0, "y": 1.25 },
{ "label": "K11 (B2,D2)", "x": 1, "y": 1.25 },
{ "label": "K12 (B2,D3)", "x": 2, "y": 1.25 },
{ "label": "K13 (B2,D5)", "x": 3, "y": 1.25 },
{ "label": "K14 (B2,D4)", "x": 4, "y": 1.25 },
{ "label": "K15 (B2,D6)", "x": 5, "y": 1.25 },
{ "label": "K16 (B2,D7)", "x": 6, "y": 1.25 },
{ "label": "K17 (B2,B4)", "x": 7, "y": 1.25 },
{ "label": "K18 (B2,B5)", "x": 8, "y": 1.25 },
{ "label": "K19 (B2,B6)", "x": 9, "y": 1.25 },
{ "label": "K1A (B2,C6)", "x": 10, "y": 1.25 },
{ "label": "K1B (B2,C7)", "x": 11, "y": 1.25 },
{ "label": "K1C (B2,F5)", "x": 12, "y": 1.25 },
{ "label": "K1D (B2,F1)", "x": 13, "y": 1.25, "w": 2 },
{ "label": "K1E (B2,F4)", "x": 15, "y": 1.25 },
{ "label": "K20 (B1,D1)", "x": 0, "y": 2.25, "w": 1.5 },
{ "label": "K21 (B1,D2)", "x": 1.5, "y": 2.25 },
{ "label": "K22 (B1,D3)", "x": 2.5, "y": 2.25 },
{ "label": "K23 (B1,D5)", "x": 3.5, "y": 2.25 },
{ "label": "K24 (B1,D4)", "x": 4.5, "y": 2.25 },
{ "label": "K25 (B1,D6)", "x": 5.5, "y": 2.25 },
{ "label": "K26 (B1,D7)", "x": 6.5, "y": 2.25 },
{ "label": "K27 (B1,B4)", "x": 7.5, "y": 2.25 },
{ "label": "K28 (B1,B5)", "x": 8.5, "y": 2.25 },
{ "label": "K29 (B1,B6)", "x": 9.5, "y": 2.25 },
{ "label": "K2A (B1,C6)", "x": 10.5, "y": 2.25 },
{ "label": "K2B (B1,C7)", "x": 11.5, "y": 2.25 },
{ "label": "K2C (B1,F5)", "x": 12.5, "y": 2.25 },
{ "label": "K2D (B1,F1)", "x": 13.5, "y": 2.25, "w": 1.5 },
{ "label": "K2E (B1,F4)", "x": 15, "y": 2.25 },
{ "label": "K30 (B0,D1)", "x": 0, "y": 3.25, "w": 1.75 },
{ "label": "K31 (B0,D2)", "x": 1.75, "y": 3.25 },
{ "label": "K32 (B0,D3)", "x": 2.75, "y": 3.25 },
{ "label": "K33 (B0,D5)", "x": 3.75, "y": 3.25 },
{ "label": "K34 (B0,D4)", "x": 4.75, "y": 3.25 },
{ "label": "K35 (B0,D6)", "x": 5.75, "y": 3.25 },
{ "label": "K36 (B0,D7)", "x": 6.75, "y": 3.25 },
{ "label": "K37 (B0,B4)", "x": 7.75, "y": 3.25 },
{ "label": "K38 (B0,B5)", "x": 8.75, "y": 3.25 },
{ "label": "K39 (B0,B6)", "x": 9.75, "y": 3.25 },
{ "label": "K3A (B0,C6)", "x": 10.75, "y": 3.25 },
{ "label": "K3B (B0,C7)", "x": 11.75, "y": 3.25 },
{ "label": "K3D (B0,F1)", "x": 12.75, "y": 3.25, "w": 2.25 },
{ "label": "K3E (B0,F4)", "x": 15, "y": 3.25 },
{ "label": "K40 (F6,D1)", "x": 0, "y": 4.25, "w": 2.25 },
{ "label": "K41 (F6,D2)", "x": 2.25, "y": 4.25 },
{ "label": "K42 (F6,D3)", "x": 3.25, "y": 4.25 },
{ "label": "K43 (F6,D5)", "x": 4.25, "y": 4.25 },
{ "label": "K44 (F6,D4)", "x": 5.25, "y": 4.25 },
{ "label": "K45 (F6,D6)", "x": 6.25, "y": 4.25 },
{ "label": "K46 (F6,D7)", "x": 7.25, "y": 4.25 },
{ "label": "K47 (F6,B4)", "x": 8.25, "y": 4.25 },
{ "label": "K48 (F6,B5)", "x": 9.25, "y": 4.25 },
{ "label": "K49 (F6,B6)", "x": 10.25, "y": 4.25 },
{ "label": "K4A (F6,C6)", "x": 11.25, "y": 4.25 },
{ "label": "K4B (F6,C7)", "x": 12.25, "y": 4.25, "w": 1.75 },
{ "label": "K4D (F6,F1)", "x": 14, "y": 4.25 },
{ "label": "K4E (F6,F4)", "x": 15, "y": 4.25 },
{ "label": "K50 (B7,D1)", "x": 0, "y": 5.25, "w": 1.25 },
{ "label": "K51 (B7,D2)", "x": 1.25, "y": 5.25, "w": 1.25 },
{ "label": "K52 (B7,D3)", "x": 2.5, "y": 5.25, "w": 1.25 },
{ "label": "K55 (B7,D6)", "x": 3.75, "y": 5.25, "w": 6.25 },
{ "label": "K5A (B7,C6)", "x": 10, "y": 5.25, "w": 1.25 },
{ "label": "K5B (B7,C7)", "x": 11.25, "y": 5.25, "w": 1.25 },
{ "label": "K5C (B7,F5)", "x": 13, "y": 5.25 },
{ "label": "K5D (B7,F1)", "x": 14, "y": 5.25 },
{ "label": "K5E (B7,F4)", "x": 15, "y": 5.25 }
]
}
}
,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/"
}

View file

@ -0,0 +1,23 @@
// Copyright 2022 peepeetee (@peepeetee)
// SPDX-License-Identifier: GPL-2.0-or-later
#include QMK_KEYBOARD_H
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = LAYOUT(
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, MO(1),
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT),
[1] = LAYOUT(
RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
};

View file

@ -0,0 +1 @@
# The default keymap for infinity81

View file

@ -0,0 +1,27 @@
# infinity81
![infinity81](https://i.imgur.com/9d6IcuA.jpg)
A per key RGB 75% with blocker keyboard
* Keyboard Maintainer: [peepeetee](https://github.com/peepeetee)
* Hardware Supported: infinity81
* Hardware Availability: no longer avaliable - future groupbuy possible
Make example for this keyboard (after setting up your build environment):
make ada/infinity81:default
Flashing example for this keyboard:
make ada/infinity81:default:flash
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Bootloader
Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB
* **Keycode in layout**: Press the key mapped to `RESET` if it is available

View file

@ -0,0 +1,18 @@
# MCU name
MCU = atmega32u4
# Bootloader selection
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output