diff --git a/keyboard/kc60/Makefile b/keyboard/kc60/Makefile index 84b72cde60..1a02d4f1cd 100644 --- a/keyboard/kc60/Makefile +++ b/keyboard/kc60/Makefile @@ -27,7 +27,7 @@ # make flip-ee = Download the eeprom file to the device, using Atmel FLIP # (must have Atmel FLIP installed). # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -111,4 +111,3 @@ AUDIO_ENABLE ?= no # Audio output on port C6 ifndef QUANTUM_DIR include ../../Makefile endif - diff --git a/keyboard/kc60/README.md b/keyboard/kc60/README.md index fbc5ac9422..00d78d0a6b 100644 --- a/keyboard/kc60/README.md +++ b/keyboard/kc60/README.md @@ -2,12 +2,10 @@ KC60 (version 2.0) keyboard firmware ====================== ## Quantum MK Firmware - For the full Quantum feature list, see [the parent README.md](/README.md). ## Building - -Download or clone the whole firmware and navigate to the keyboard/kc60 folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. +Download or clone the whole firmware and navigate to the keyboard/kc60 folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. Depending on which keymap you would like to use, you will have to compile slightly differently. @@ -22,3 +20,8 @@ To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` $ make KEYMAP=[default|jack|] ``` Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. + +## WS2812 Support +![Image of KC60 with RGB Underglow](keymaps/ws2812/ws2812_example.jpg) + +Build with WS2812 Support by running `make KEYMAP=ws2812`. diff --git a/keyboard/kc60/config.h b/keyboard/kc60/config.h index 91d4e09c2e..956a569f93 100644 --- a/keyboard/kc60/config.h +++ b/keyboard/kc60/config.h @@ -45,7 +45,7 @@ along with this program. If not, see . // Possible pins for columns include: F1 F0 E6 D7 D6 D4 C7 C6 B7 B5 B4 B3 B1 B0 // Pins for rows include: D0 D1 F6 F7 D5 -// KC60 Version 2 +// KC60 Version 2 #define MATRIX_ROW_PINS { D0, D1, F6, F7, D5 } #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3 } #define UNUSED_PINS diff --git a/keyboard/kc60/kc60.c b/keyboard/kc60/kc60.c index 0a578b2b88..64c0675cd7 100644 --- a/keyboard/kc60/kc60.c +++ b/keyboard/kc60/kc60.c @@ -62,7 +62,7 @@ void backlight_init_ports() DDRB |= (1<<6); PORTB &= ~(1<<6); - // Use full 16-bit resolution. + // Use full 16-bit resolution. ICR1 = 0xFFFF; // I could write a wall of text here to explain... but TL;DW @@ -99,7 +99,7 @@ void backlight_set(uint8_t level) // Set the brightness CHANNEL = 0xFFFF; } - else + else { // Turn on PWM control of PB6 TCCR1A |= _BV(COM1B1); diff --git a/keyboard/kc60/keymaps/default/compiled.hex b/keyboard/kc60/keymaps/default/compiled.hex index c8233506df..4e89e1b39c 100644 Binary files a/keyboard/kc60/keymaps/default/compiled.hex and b/keyboard/kc60/keymaps/default/compiled.hex differ diff --git a/keyboard/kc60/keymaps/ws2812/Makefile b/keyboard/kc60/keymaps/ws2812/Makefile new file mode 100644 index 0000000000..f06bfdb526 --- /dev/null +++ b/keyboard/kc60/keymaps/ws2812/Makefile @@ -0,0 +1,63 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE ?= yes # Enable WS2812 underglow RGB strip +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover + +ifndef QUANTUM_DIR + include ../../Makefile +endif diff --git a/keyboard/kc60/keymaps/ws2812/README.md b/keyboard/kc60/keymaps/ws2812/README.md new file mode 100644 index 0000000000..af76f7ab18 --- /dev/null +++ b/keyboard/kc60/keymaps/ws2812/README.md @@ -0,0 +1,21 @@ +KC60 with WS2812 RGB Underglow +====================== + +![Image of KC60 with RGB Underglow](ws2812_example.jpg) + +## Quantum MK Firmware +For the full Quantum feature list, see [the parent README.md](/README.md). + +## WS2812 Support +By default, it is now setup for 16 LEDs on the PF5 breakout pin. See [included image](ws2812_wiring.jpg) for wiring reference. + +### Build +To build this keymap with WS2812 enabled, simply run `make KEYMAP=ws2812`. + +### Reference Images +![Wiring Reference](ws2812_wiring.jpg) +![RGB Strip turned on](ws2812_underside-lit.jpg) +![RGB Strip turned off](ws2812_underside.jpg) + +### Additional Credits +Keymap based on work by [TerryMatthews](https://github.com/TerryMathews) for GH60 Satan. diff --git a/keyboard/kc60/keymaps/ws2812/compiled.hex b/keyboard/kc60/keymaps/ws2812/compiled.hex new file mode 100644 index 0000000000..f7417a27fd Binary files /dev/null and b/keyboard/kc60/keymaps/ws2812/compiled.hex differ diff --git a/keyboard/kc60/keymaps/ws2812/config.h b/keyboard/kc60/keymaps/ws2812/config.h new file mode 100644 index 0000000000..933bb0d2d1 --- /dev/null +++ b/keyboard/kc60/keymaps/ws2812/config.h @@ -0,0 +1,10 @@ +#include "../../config.h" + +/* WS2812B RGB Underglow LED */ +#define ws2812_PORTREG PORTF +#define ws2812_DDRREG DDRF +#define ws2812_pin PF5 // Based on wiring depicted in ws2812_wiring.jpg +#define RGBLED_NUM 16 // Number of LEDs. Change this to match your use case. +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboard/kc60/keymaps/ws2812/keymap.c b/keyboard/kc60/keymaps/ws2812/keymap.c new file mode 100644 index 0000000000..bd5bef787b --- /dev/null +++ b/keyboard/kc60/keymaps/ws2812/keymap.c @@ -0,0 +1,161 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "kc60.h" + +// Used for SHIFT_ESC +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,-----------------------------------------------------------. + * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | + * |-----------------------------------------------------------| + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | + * |-----------------------------------------------------------| + * |Ctrl|Gui |Alt | Space |Alt |Gui |FN |Ctrl | + * `-----------------------------------------------------------' + */ +[_BL] = KEYMAP( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_NO, KC_RSFT, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT,KC_RGUI, MO(_FL), KC_RCTL), + + /* Keymap _FL: Function Layer + * ,-----------------------------------------------------------. + * |~ |F1 |F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12| DEL | + * |-----------------------------------------------------------| + * | | |UP | | | | | | | | |BL-|BL+|BL | + * |-----------------------------------------------------------| + * | |LFT|DWN|RGT| | | | | | | | | + * |-----------------------------------------------------------| + * | |FN1|FN2|FN3|FN4|FN5|FN6|FN7|FN8| | | | + * |-----------------------------------------------------------| + * | | | | | | | |RSET| + * `-----------------------------------------------------------' + */ +[_FL] = KEYMAP( + #ifdef RGBLIGHT_ENABLE + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_INC, BL_TOGG, \ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, F(1), F(2), F(3), F(4), F(5), F(6), F(7), F(8), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET), + #else + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_INC, BL_TOGG, \ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET), + #endif +}; + +enum function_id { + SHIFT_ESC, + #ifdef RGBLIGHT_ENABLE + RGBLED_TOGGLE, + RGBLED_STEP_MODE, + RGBLED_INCREASE_HUE, + RGBLED_DECREASE_HUE, + RGBLED_INCREASE_SAT, + RGBLED_DECREASE_SAT, + RGBLED_INCREASE_VAL, + RGBLED_DECREASE_VAL + #endif +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(SHIFT_ESC), + #ifdef RGBLIGHT_ENABLE + [1] = ACTION_FUNCTION(RGBLED_TOGGLE), + [2] = ACTION_FUNCTION(RGBLED_STEP_MODE), + [3] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), + [4] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), + [5] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), + [6] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), + [7] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), + [8] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), + #endif +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t shift_esc_shift_mask; + switch (id) { + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + //led operations + #ifdef RGBLIGHT_ENABLE + case RGBLED_TOGGLE: + if (record->event.pressed) { + rgblight_toggle(); + } + break; + case RGBLED_INCREASE_HUE: + if (record->event.pressed) { + rgblight_increase_hue(); + } + break; + case RGBLED_DECREASE_HUE: + if (record->event.pressed) { + rgblight_decrease_hue(); + } + break; + case RGBLED_INCREASE_SAT: + if (record->event.pressed) { + rgblight_increase_sat(); + } + break; + case RGBLED_DECREASE_SAT: + if (record->event.pressed) { + rgblight_decrease_sat(); + } + break; + case RGBLED_INCREASE_VAL: + if (record->event.pressed) { + rgblight_increase_val(); + } + break; + case RGBLED_DECREASE_VAL: + if (record->event.pressed) { + rgblight_decrease_val(); + } + break; + case RGBLED_STEP_MODE: + if (record->event.pressed) { + rgblight_step(); + } + break; + #endif + } +} diff --git a/keyboard/kc60/keymaps/ws2812/ws2812_example.jpg b/keyboard/kc60/keymaps/ws2812/ws2812_example.jpg new file mode 100644 index 0000000000..5c62cfded3 Binary files /dev/null and b/keyboard/kc60/keymaps/ws2812/ws2812_example.jpg differ diff --git a/keyboard/kc60/keymaps/ws2812/ws2812_underside-lit.jpg b/keyboard/kc60/keymaps/ws2812/ws2812_underside-lit.jpg new file mode 100644 index 0000000000..2eab21433a Binary files /dev/null and b/keyboard/kc60/keymaps/ws2812/ws2812_underside-lit.jpg differ diff --git a/keyboard/kc60/keymaps/ws2812/ws2812_underside.jpg b/keyboard/kc60/keymaps/ws2812/ws2812_underside.jpg new file mode 100644 index 0000000000..159d63904f Binary files /dev/null and b/keyboard/kc60/keymaps/ws2812/ws2812_underside.jpg differ diff --git a/keyboard/kc60/keymaps/ws2812/ws2812_wiring.jpg b/keyboard/kc60/keymaps/ws2812/ws2812_wiring.jpg new file mode 100644 index 0000000000..61b749b667 Binary files /dev/null and b/keyboard/kc60/keymaps/ws2812/ws2812_wiring.jpg differ