Keyboard: Improvement of crkbd communication functions (based on helix-keyboard) (#3798)

* improvement of crkbd communication functions (based on  helix-keyboard)

* Removed unnecessary code.

* Changed read restriction from #define to #pragma once.

* Changed from sizeof to defined size.

* moved lib folder to crkbdroot.
removed warning of ws2812.d

keyboards/crkbd/config.h

@@ -16,9 +16,16 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
+#pragma once
-#define CONFIG_H
 
 #include "config_common.h"
+#include <serial_config.h>
 
-#endif
+#ifdef USE_Link_Time_Optimization
+  // LTO has issues with macros (action_get_macro) and "functions" (fn_actions),
+  //  so just disable them
+  #define NO_ACTION_MACRO
+  #define NO_ACTION_FUNCTION
+
+  #define DISABLE_LEADER
+#endif // USE_Link_Time_Optimization

keyboards/crkbd/crkbd.h

@@ -1,8 +1,5 @@
-#ifndef CRKBD_H
+#pragma once
-#define CRKBD_H
 
 #ifdef KEYBOARD_crkbd_rev1
   #include "rev1.h"
 #endif
-
-#endif

keyboards/crkbd/i2c.c

@@ -34,7 +34,7 @@ void i2c_delay(void) {
   // _delay_us(100);
 }
 
-// Setup twi to run at 100kHz
+// Setup twi to run at 100kHz or 400kHz (see ./i2c.h SCL_CLOCK)
 void i2c_master_init(void) {
   // no prescaler
   TWSR = 0;

keyboards/crkbd/i2c.h

@@ -1,5 +1,4 @@
-#ifndef I2C_H
+#pragma once
-#define I2C_H
 
 #include <stdint.h>
 
@@ -15,7 +14,7 @@
 
 #define SLAVE_BUFFER_SIZE 0x10
 
-// i2c SCL clock frequency
+// i2c SCL clock frequency 400kHz
 #define SCL_CLOCK  400000L
 
 extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
@@ -45,5 +44,3 @@ extern unsigned char i2c_readNak(void);
 extern unsigned char i2c_read(unsigned char ack);
 
 #define i2c_read(ack)  (ack) ? i2c_readAck() : i2c_readNak();
-
-#endif

keyboards/crkbd/keymaps/default/keymap.c

@@ -5,7 +5,6 @@
   #include "split_util.h"
 #endif
 #ifdef SSD1306OLED
-  #include "LUFA/Drivers/Peripheral/TWI.h"
   #include "ssd1306.h"
 #endif
 
@@ -130,7 +129,6 @@ void matrix_init_user(void) {
     #endif
     //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
     #ifdef SSD1306OLED
-        TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000));
         iota_gfx_init(!has_usb());   // turns on the display
     #endif
 }

keyboards/crkbd/keymaps/default/rules.mk

@@ -21,10 +21,10 @@ SWAP_HANDS_ENABLE = no        # Enable one-hand typing
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
 # If you want to change the display of OLED, you need to change here
-SRC +=  ../lib/rgb_state_reader.c \
+SRC +=  ./lib/rgb_state_reader.c \
-        ../lib/layer_state_reader.c \
+        ./lib/layer_state_reader.c \
-        ../lib/logo_reader.c \
+        ./lib/logo_reader.c \
-        ../lib/keylogger.c \
+        ./lib/keylogger.c \
-        # ../lib/mode_icon_reader.c \
+        # ./lib/mode_icon_reader.c \
-        # ../lib/host_led_state_reader.c \
+        # ./lib/host_led_state_reader.c \
-        # ../lib/timelogger.c \
+        # ./lib/timelogger.c \

keyboards/crkbd/keymaps/like_jis/keymap.c

@@ -5,7 +5,6 @@
   #include "split_util.h"
 #endif
 #ifdef SSD1306OLED
-  #include "LUFA/Drivers/Peripheral/TWI.h"
   #include "ssd1306.h"
 #endif
 
@@ -124,7 +123,6 @@ void matrix_init_user(void) {
     #endif
     //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
     #ifdef SSD1306OLED
-        TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000));
         iota_gfx_init(!has_usb());   // turns on the display
     #endif
 }

keyboards/crkbd/keymaps/like_jis/rules.mk

@@ -21,10 +21,10 @@ SWAP_HANDS_ENABLE = no        # Enable one-hand typing
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
 # If you want to change the display of OLED, you need to change here
-SRC +=  ../lib/rgb_state_reader.c \
+SRC +=  ./lib/rgb_state_reader.c \
-        ../lib/layer_state_reader.c \
+        ./lib/layer_state_reader.c \
-        ../lib/logo_reader.c \
+        ./lib/logo_reader.c \
-        ../lib/keylogger.c \
+        ./lib/keylogger.c \
-        # ../lib/mode_icon_reader.c \
+        # ./lib/mode_icon_reader.c \
-        # ../lib/host_led_state_reader.c \
+        # ./lib/host_led_state_reader.c \
-        # ../lib/timelogger.c \
+        # ./lib/timelogger.c \

keyboards/crkbd/pro_micro.h

@@ -21,9 +21,7 @@
 
   $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
 */
-
+#pragma once
-#ifndef Pins_Arduino_h
-#define Pins_Arduino_h
 
 #include <avr/pgmspace.h>
 
@@ -358,5 +356,3 @@ const uint8_t PROGMEM analog_pin_to_channel_PGM[] = {
 #define SERIAL_PORT_USBVIRTUAL     Serial
 #define SERIAL_PORT_HARDWARE       Serial1
 #define SERIAL_PORT_HARDWARE_OPEN  Serial1
-
-#endif /* Pins_Arduino_h */

keyboards/crkbd/rev1/config.h

@@ -16,10 +16,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef REV1_CONFIG_H
+#pragma once
-#define REV1_CONFIG_H
-
-#include "../config.h"
 
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xFEED
@@ -82,6 +79,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_ONESHOT
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
-
-
-#endif

keyboards/crkbd/rev1/matrix.c

@@ -20,6 +20,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include <stdint.h>
 #include <stdbool.h>
+#include <string.h>
 #include <avr/io.h>
 #include <avr/wdt.h>
 #include <avr/interrupt.h>
@@ -30,12 +31,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "matrix.h"
 #include "split_util.h"
 #include "pro_micro.h"
-#include "config.h"
 
 #ifdef USE_MATRIX_I2C
 #  include "i2c.h"
 #else // USE_SERIAL
-#  include "serial.h"
+#  include "split_scomm.h"
 #endif
 
 #ifndef DEBOUNCE
@@ -103,6 +103,8 @@ void matrix_init(void)
     init_cols();
 
     TX_RX_LED_INIT;
+    TXLED0;
+    RXLED0;
 
     // initialize matrix state: all keys off
     for (uint8_t i=0; i < MATRIX_ROWS; i++) {
@@ -179,17 +181,20 @@ i2c_error: // the cable is disconnceted, or something else went wrong
 
 #else // USE_SERIAL
 
-int serial_transaction(void) {
+int serial_transaction(int master_changed) {
     int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+#ifdef SERIAL_USE_MULTI_TRANSACTION
+    int ret=serial_update_buffers(master_changed);
+#else
     int ret=serial_update_buffers();
+#endif
     if (ret ) {
-        if(ret==2)RXLED1;
+        if(ret==2) RXLED1;
         return 1;
     }
-RXLED0;
+    RXLED0;
-    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+    memcpy(&matrix[slaveOffset],
-        matrix[slaveOffset+i] = serial_slave_buffer[i];
+        (void *)serial_slave_buffer, SERIAL_SLAVE_BUFFER_LENGTH);
-    }
     return 0;
 }
 #endif
@@ -200,19 +205,9 @@ uint8_t matrix_scan(void)
         matrix_master_scan();
     }else{
         matrix_slave_scan();
-
-//        if(serial_slave_DATA_CORRUPT()){
-//          TXLED0;
         int offset = (isLeftHand) ? ROWS_PER_HAND : 0;
-
+        memcpy(&matrix[offset],
-          for (int i = 0; i < ROWS_PER_HAND; ++i) {
+               (void *)serial_master_buffer, SERIAL_MASTER_BUFFER_LENGTH);
-              matrix[offset+i] = serial_master_buffer[i];
-          }
-
-//        }else{
-//          TXLED1;
-//        }
-
         matrix_scan_quantum();
     }
     return 1;
@@ -222,6 +217,7 @@ uint8_t matrix_scan(void)
 uint8_t matrix_master_scan(void) {
 
     int ret = _matrix_scan();
+    int mchanged = 1;
 
     int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
 
@@ -231,15 +227,18 @@ uint8_t matrix_master_scan(void) {
 //        i2c_slave_buffer[i] = matrix[offset+i];
 //    }
 #else // USE_SERIAL
-    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+  #ifdef SERIAL_USE_MULTI_TRANSACTION
-        serial_master_buffer[i] = matrix[offset+i];
+    mchanged = memcmp((void *)serial_master_buffer,
-    }
+		      &matrix[offset], SERIAL_MASTER_BUFFER_LENGTH);
+  #endif
+    memcpy((void *)serial_master_buffer,
+	   &matrix[offset], SERIAL_MASTER_BUFFER_LENGTH);
 #endif
 
 #ifdef USE_MATRIX_I2C
     if( i2c_transaction() ) {
 #else // USE_SERIAL
-    if( serial_transaction() ) {
+    if( serial_transaction(mchanged) ) {
 #endif
         // turn on the indicator led when halves are disconnected
         TXLED1;
@@ -273,9 +272,19 @@ void matrix_slave_scan(void) {
         i2c_slave_buffer[i] = matrix[offset+i];
     }
 #else // USE_SERIAL
+  #ifdef SERIAL_USE_MULTI_TRANSACTION
+    int change = 0;
+  #endif
     for (int i = 0; i < ROWS_PER_HAND; ++i) {
+  #ifdef SERIAL_USE_MULTI_TRANSACTION
+        if( serial_slave_buffer[i] != matrix[offset+i] )
+	    change = 1;
+  #endif
         serial_slave_buffer[i] = matrix[offset+i];
     }
+  #ifdef SERIAL_USE_MULTI_TRANSACTION
+    slave_buffer_change_count += change;
+  #endif
 #endif
 }
 

keyboards/crkbd/rev1/rev1.h

@@ -1,5 +1,4 @@
-#ifndef REV1_H
+#pragma once
-#define REV1_CONFIG_H
 
 #include "../crkbd.h"
 
@@ -49,5 +48,3 @@
     KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25,                     KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \
                                             KC_##L30, KC_##L31, KC_##L32, KC_##R30, KC_##R31, KC_##R32 \
   )
-
-#endif

keyboards/crkbd/rev1/rules.mk

@@ -1,2 +1,3 @@
-SRC += rev1/matrix.c \
+SRC += rev1/matrix.c
-	   ws2812.c
+SRC += rev1/split_util.c
+SRC += rev1/split_scomm.c

keyboards/crkbd/rev1/serial_config.h

@@ -0,0 +1,10 @@
+#pragma once
+
+/* Soft Serial defines */
+#define SERIAL_PIN_DDR DDRD
+#define SERIAL_PIN_PORT PORTD
+#define SERIAL_PIN_INPUT PIND
+#define SERIAL_PIN_MASK _BV(PD2)
+#define SERIAL_PIN_INTERRUPT INT2_vect
+
+#define SERIAL_USE_MULTI_TRANSACTION

keyboards/crkbd/rev1/serial_config_simpleapi.h

@@ -0,0 +1,5 @@
+#pragma once
+
+#undef SERIAL_USE_MULTI_TRANSACTION
+#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
+#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2

keyboards/crkbd/rev1/split_scomm.c

@@ -0,0 +1,73 @@
+#ifdef USE_SERIAL
+#ifdef SERIAL_USE_MULTI_TRANSACTION
+/* --- USE flexible API (using multi-type transaction function) --- */
+
+#include <stdbool.h>
+#include <stdint.h>
+#include <stddef.h>
+#include <split_scomm.h>
+#include "serial.h"
+#ifdef SERIAL_DEBUG_MODE
+#include <avr/io.h>
+#endif
+
+uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
+uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
+uint8_t volatile status_com = 0;
+uint8_t volatile status1 = 0;
+uint8_t slave_buffer_change_count = 0;
+uint8_t s_change_old = 0xff;
+
+SSTD_t transactions[] = {
+#define GET_SLAVE_STATUS 0
+    /* master buffer not changed, only recive slave_buffer_change_count */
+    { (uint8_t *)&status_com,
+      0, NULL,
+      sizeof(slave_buffer_change_count), &slave_buffer_change_count,
+    },
+#define PUT_MASTER_GET_SLAVE_STATUS 1
+    /* master buffer changed need send, and recive slave_buffer_change_count  */
+    { (uint8_t *)&status_com,
+      sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer,
+      sizeof(slave_buffer_change_count), &slave_buffer_change_count,
+    },
+#define GET_SLAVE_BUFFER 2
+    /* recive serial_slave_buffer */
+    { (uint8_t *)&status1,
+      0, NULL,
+      sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer
+    }
+};
+
+void serial_master_init(void)
+{
+    soft_serial_initiator_init(transactions);
+}
+
+void serial_slave_init(void)
+{
+    soft_serial_target_init(transactions);
+}
+
+// 0 => no error
+// 1 => slave did not respond
+// 2 => checksum error
+int serial_update_buffers(int master_update)
+{
+    int status;
+    static int need_retry = 0;
+    if( s_change_old != slave_buffer_change_count ) {
+	status = soft_serial_transaction(GET_SLAVE_BUFFER);
+	if( status == TRANSACTION_END )
+	    s_change_old = slave_buffer_change_count;
+    }
+    if( !master_update && !need_retry)
+	status = soft_serial_transaction(GET_SLAVE_STATUS);
+    else
+	status = soft_serial_transaction(PUT_MASTER_GET_SLAVE_STATUS);
+    need_retry = ( status == TRANSACTION_END ) ? 0 : 1;
+    return status;
+}
+
+#endif // SERIAL_USE_MULTI_TRANSACTION
+#endif /* USE_SERIAL */

keyboards/crkbd/rev1/split_scomm.h

@@ -0,0 +1,21 @@
+#pragma once
+
+#ifndef SERIAL_USE_MULTI_TRANSACTION
+/* --- USE Simple API (OLD API, compatible with let's split serial.c) --- */
+#include "serial.h"
+
+#else
+/* --- USE flexible API (using multi-type transaction function) --- */
+// Buffers for master - slave communication
+#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
+#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2
+
+extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
+extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
+extern uint8_t slave_buffer_change_count;
+
+void serial_master_init(void);
+void serial_slave_init(void);
+int serial_update_buffers(int master_changed);
+
+#endif

keyboards/crkbd/rev1/split_util.c

@@ -7,12 +7,11 @@
 #include "split_util.h"
 #include "matrix.h"
 #include "keyboard.h"
-#include "config.h"
 
 #ifdef USE_MATRIX_I2C
 #  include "i2c.h"
 #else
-#  include "serial.h"
+#  include "split_scomm.h"
 #endif
 
 volatile bool isLeftHand = true;

keyboards/crkbd/rev1/split_util.h

@@ -1,5 +1,4 @@
-#ifndef SPLIT_KEYBOARD_UTIL_H
+#pragma once
-#define SPLIT_KEYBOARD_UTIL_H
 
 #include <stdbool.h>
 #include "eeconfig.h"
@@ -15,5 +14,3 @@ void split_keyboard_setup(void);
 bool has_usb(void);
 
 void matrix_master_OLED_init (void);
-
-#endif

keyboards/crkbd/rules.mk

@@ -1,7 +1,9 @@
-SRC += i2c.c \
+SRC += i2c.c
-	   serial.c \
+SRC += serial.c
-	   split_util.c \
+SRC += ssd1306.c
-	   ssd1306.c
+
+# if firmware size over limit, try this option
+# CFLAGS += -flto
 
 # MCU name
 #MCU = at90usb1287

keyboards/crkbd/serial.c

@@ -9,36 +9,128 @@
 #include <avr/io.h>
 #include <avr/interrupt.h>
 #include <util/delay.h>
+#include <stddef.h>
 #include <stdbool.h>
 #include "serial.h"
+//#include <pro_micro.h>
 
 #ifdef USE_SERIAL
 
-// Serial pulse period in microseconds. Its probably a bad idea to lower this
+#ifndef SERIAL_USE_MULTI_TRANSACTION
-// value.
+/* --- USE Simple API (OLD API, compatible with let's split serial.c) */
-#define SERIAL_DELAY 24
+  #if SERIAL_SLAVE_BUFFER_LENGTH > 0
+  uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
+  #endif
+  #if SERIAL_MASTER_BUFFER_LENGTH > 0
+  uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
+  #endif
+  uint8_t volatile status0 = 0;
 
-uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
+SSTD_t transactions[] = {
-uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
+    { (uint8_t *)&status0,
+  #if SERIAL_MASTER_BUFFER_LENGTH > 0
+      sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer,
+  #else
+      0, (uint8_t *)NULL,
+  #endif
+  #if SERIAL_SLAVE_BUFFER_LENGTH > 0
+      sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer
+  #else
+      0, (uint8_t *)NULL,
+  #endif
+  }
+};
 
-#define SLAVE_DATA_CORRUPT (1<<0)
+void serial_master_init(void)
-volatile uint8_t status = 0;
+{ soft_serial_initiator_init(transactions); }
+
+void serial_slave_init(void)
+{ soft_serial_target_init(transactions); }
+
+// 0 => no error
+// 1 => slave did not respond
+// 2 => checksum error
+int serial_update_buffers()
+{ return soft_serial_transaction(); }
+
+#endif // Simple API (OLD API, compatible with let's split serial.c)
+
+#define ALWAYS_INLINE __attribute__((always_inline))
+#define NO_INLINE __attribute__((noinline))
+#define _delay_sub_us(x)    __builtin_avr_delay_cycles(x)
+
+// Serial pulse period in microseconds.
+#define TID_SEND_ADJUST 14
+
+#define SELECT_SERIAL_SPEED 1
+#if SELECT_SERIAL_SPEED == 0
+  // Very High speed
+  #define SERIAL_DELAY 4             // micro sec
+  #define READ_WRITE_START_ADJUST 33 // cycles
+  #define READ_WRITE_WIDTH_ADJUST 3 // cycles
+#elif SELECT_SERIAL_SPEED == 1
+  // High speed
+  #define SERIAL_DELAY 6             // micro sec
+  #define READ_WRITE_START_ADJUST 30 // cycles
+  #define READ_WRITE_WIDTH_ADJUST 3 // cycles
+#elif SELECT_SERIAL_SPEED == 2
+  // Middle speed
+  #define SERIAL_DELAY 12            // micro sec
+  #define READ_WRITE_START_ADJUST 30 // cycles
+  #define READ_WRITE_WIDTH_ADJUST 3 // cycles
+#elif SELECT_SERIAL_SPEED == 3
+  // Low speed
+  #define SERIAL_DELAY 24            // micro sec
+  #define READ_WRITE_START_ADJUST 30 // cycles
+  #define READ_WRITE_WIDTH_ADJUST 3 // cycles
+#elif SELECT_SERIAL_SPEED == 4
+  // Very Low speed
+  #define SERIAL_DELAY 50            // micro sec
+  #define READ_WRITE_START_ADJUST 30 // cycles
+  #define READ_WRITE_WIDTH_ADJUST 3 // cycles
+#else
+#error Illegal Serial Speed
+#endif
+
+
+#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2)
+#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2)
+
+#define SLAVE_INT_WIDTH_US 1
+#ifndef SERIAL_USE_MULTI_TRANSACTION
+  #define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY
+#else
+  #define SLAVE_INT_ACK_WIDTH_UNIT 2
+  #define SLAVE_INT_ACK_WIDTH 4
+#endif
+
+static SSTD_t *Transaction_table = NULL;
 
 inline static
 void serial_delay(void) {
   _delay_us(SERIAL_DELAY);
 }
-void serial_delay_short(void) {
+
-  _delay_us(SERIAL_DELAY-1);
+inline static
+void serial_delay_half1(void) {
+  _delay_us(SERIAL_DELAY_HALF1);
 }
+
+inline static
+void serial_delay_half2(void) {
+  _delay_us(SERIAL_DELAY_HALF2);
+}
+
+inline static void serial_output(void) ALWAYS_INLINE;
 inline static
 void serial_output(void) {
   SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
 }
 
 // make the serial pin an input with pull-up resistor
+inline static void serial_input_with_pullup(void) ALWAYS_INLINE;
 inline static
-void serial_input(void) {
+void serial_input_with_pullup(void) {
   SERIAL_PIN_DDR  &= ~SERIAL_PIN_MASK;
   SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
 }
@@ -48,191 +140,305 @@ uint8_t serial_read_pin(void) {
   return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
 }
 
+inline static void serial_low(void) ALWAYS_INLINE;
 inline static
 void serial_low(void) {
   SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
 }
 
+inline static void serial_high(void) ALWAYS_INLINE;
 inline static
 void serial_high(void) {
   SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
 }
 
-void serial_master_init(void) {
+void soft_serial_initiator_init(SSTD_t *sstd_table)
+{
+    Transaction_table = sstd_table;
     serial_output();
     serial_high();
 }
 
-void serial_slave_init(void) {
+void soft_serial_target_init(SSTD_t *sstd_table)
-  serial_input();
+{
+    Transaction_table = sstd_table;
+    serial_input_with_pullup();
 
-#ifndef USE_SERIAL_PD2
+#if SERIAL_PIN_MASK == _BV(PD0)
     // Enable INT0
     EIMSK |= _BV(INT0);
     // Trigger on falling edge of INT0
     EICRA &= ~(_BV(ISC00) | _BV(ISC01));
-#else
+#elif SERIAL_PIN_MASK == _BV(PD2)
     // Enable INT2
     EIMSK |= _BV(INT2);
     // Trigger on falling edge of INT2
     EICRA &= ~(_BV(ISC20) | _BV(ISC21));
+#else
+ #error unknown SERIAL_PIN_MASK value
 #endif
 }
 
-// Used by the master to synchronize timing with the slave.
+// Used by the sender to synchronize timing with the reciver.
+static void sync_recv(void) NO_INLINE;
 static
 void sync_recv(void) {
-  serial_input();
+  for (uint8_t i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) {
-  // This shouldn't hang if the slave disconnects because the
+  }
-  // serial line will float to high if the slave does disconnect.
+  // This shouldn't hang if the target disconnects because the
+  // serial line will float to high if the target does disconnect.
   while (!serial_read_pin());
-  //serial_delay();
-  _delay_us(SERIAL_DELAY-5);
 }
 
-// Used by the slave to send a synchronization signal to the master.
+// Used by the reciver to send a synchronization signal to the sender.
+static void sync_send(void)NO_INLINE;
 static
 void sync_send(void) {
-  serial_output();
-
   serial_low();
   serial_delay();
-
   serial_high();
 }
 
 // Reads a byte from the serial line
-static
+static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) NO_INLINE;
-uint8_t serial_read_byte(void) {
+static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) {
-  uint8_t byte = 0;
+    uint8_t byte, i, p, pb;
-  serial_input();
+
-  for ( uint8_t i = 0; i < 8; ++i) {
+  _delay_sub_us(READ_WRITE_START_ADJUST);
-    byte = (byte << 1) | serial_read_pin();
+  for( i = 0, byte = 0, p = 0; i < bit; i++ ) {
-    serial_delay();
+      serial_delay_half1();   // read the middle of pulses
-    _delay_us(1);
+      if( serial_read_pin() ) {
+	  byte = (byte << 1) | 1; p ^= 1;
+      } else {
+	  byte = (byte << 1) | 0; p ^= 0;
       }
+      _delay_sub_us(READ_WRITE_WIDTH_ADJUST);
+      serial_delay_half2();
+  }
+  /* recive parity bit */
+  serial_delay_half1();   // read the middle of pulses
+  pb = serial_read_pin();
+  _delay_sub_us(READ_WRITE_WIDTH_ADJUST);
+  serial_delay_half2();
+
+  *pterrcount += (p != pb)? 1 : 0;
 
   return byte;
 }
 
 // Sends a byte with MSB ordering
+void serial_write_chunk(uint8_t data, uint8_t bit) NO_INLINE;
+void serial_write_chunk(uint8_t data, uint8_t bit) {
+    uint8_t b, p;
+    for( p = 0, b = 1<<(bit-1); b ; b >>= 1) {
+	if(data & b) {
+	    serial_high(); p ^= 1;
+	} else {
+	    serial_low();  p ^= 0;
+	}
+	serial_delay();
+    }
+    /* send parity bit */
+    if(p & 1) { serial_high(); }
+    else      { serial_low(); }
+    serial_delay();
+
+    serial_low(); // sync_send() / senc_recv() need raise edge
+}
+
+static void serial_send_packet(uint8_t *buffer, uint8_t size) NO_INLINE;
 static
-void serial_write_byte(uint8_t data) {
+void serial_send_packet(uint8_t *buffer, uint8_t size) {
-  uint8_t b = 8;
+  for (uint8_t i = 0; i < size; ++i) {
-  serial_output();
+    uint8_t data;
-  while( b-- ) {
+    data = buffer[i];
-    if(data & (1 << b)) {
+    sync_send();
-      serial_high();
+    serial_write_chunk(data,8);
-    } else {
-      serial_low();
-    }
-    serial_delay();
   }
 }
 
-// interrupt handle to be used by the slave device
+static uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) NO_INLINE;
+static
+uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) {
+  uint8_t pecount = 0;
+  for (uint8_t i = 0; i < size; ++i) {
+    uint8_t data;
+    sync_recv();
+    data = serial_read_chunk(&pecount, 8);
+    buffer[i] = data;
+  }
+  return pecount == 0;
+}
+
+inline static
+void change_sender2reciver(void) {
+    sync_send();          //0
+    serial_delay_half1(); //1
+    serial_low();         //2
+    serial_input_with_pullup(); //2
+    serial_delay_half1(); //3
+}
+
+inline static
+void change_reciver2sender(void) {
+    sync_recv();     //0
+    serial_delay();  //1
+    serial_low();    //3
+    serial_output(); //3
+    serial_delay_half1(); //4
+}
+
+// interrupt handle to be used by the target device
 ISR(SERIAL_PIN_INTERRUPT) {
-  sync_send();
 
-  uint8_t checksum = 0;
+#ifndef SERIAL_USE_MULTI_TRANSACTION
-  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
+  serial_low();
-    serial_write_byte(serial_slave_buffer[i]);
+  serial_output();
-    sync_send();
+  SSTD_t *trans = Transaction_table;
-    checksum += serial_slave_buffer[i];
+#else
-  }
+  // recive transaction table index
-  serial_write_byte(checksum);
+  uint8_t tid;
-  sync_send();
+  uint8_t pecount = 0;
+  sync_recv();
+  tid = serial_read_chunk(&pecount,4);
+  if(pecount> 0)
+      return;
+  serial_delay_half1();
 
-  // wait for the sync to finish sending
+  serial_high(); // response step1 low->high
-  serial_delay();
+  serial_output();
+  _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT*SLAVE_INT_ACK_WIDTH);
+  SSTD_t *trans = &Transaction_table[tid];
+  serial_low(); // response step2 ack high->low
+#endif
 
-  // read the middle of pulses
+  // target send phase
-  _delay_us(SERIAL_DELAY/2);
+  if( trans->target2initiator_buffer_size > 0 )
+      serial_send_packet((uint8_t *)trans->target2initiator_buffer,
+			 trans->target2initiator_buffer_size);
+  // target switch to input
+  change_sender2reciver();
 
-  uint8_t checksum_computed = 0;
+  // target recive phase
-  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
+  if( trans->initiator2target_buffer_size > 0 ) {
-    serial_master_buffer[i] = serial_read_byte();
+      if (serial_recive_packet((uint8_t *)trans->initiator2target_buffer,
-    sync_send();
+			       trans->initiator2target_buffer_size) ) {
-    checksum_computed += serial_master_buffer[i];
+	  *trans->status = TRANSACTION_ACCEPTED;
-  }
-  uint8_t checksum_received = serial_read_byte();
-  sync_send();
-
-  serial_input(); // end transaction
-
-  if ( checksum_computed != checksum_received ) {
-    status |= SLAVE_DATA_CORRUPT;
       } else {
-    status &= ~SLAVE_DATA_CORRUPT;
+	  *trans->status = TRANSACTION_DATA_ERROR;
       }
+  } else {
+      *trans->status = TRANSACTION_ACCEPTED;
+  }
+
+  sync_recv(); //weit initiator output to high
 }
 
-inline
+/////////
-bool serial_slave_DATA_CORRUPT(void) {
+//  start transaction by initiator
-  return status & SLAVE_DATA_CORRUPT;
+//
-}
+// int  soft_serial_transaction(int sstd_index)
-
-// Copies the serial_slave_buffer to the master and sends the
-// serial_master_buffer to the slave.
 //
 // Returns:
-// 0 => no error
+//    TRANSACTION_END
-// 1 => slave did not respond
+//    TRANSACTION_NO_RESPONSE
-int serial_update_buffers(void) {
+//    TRANSACTION_DATA_ERROR
-  // this code is very time dependent, so we need to disable interrupts
+// this code is very time dependent, so we need to disable interrupts
+#ifndef SERIAL_USE_MULTI_TRANSACTION
+int  soft_serial_transaction(void) {
+  SSTD_t *trans = Transaction_table;
+#else
+int  soft_serial_transaction(int sstd_index) {
+  SSTD_t *trans = &Transaction_table[sstd_index];
+#endif
   cli();
 
-  // signal to the slave that we want to start a transaction
+  // signal to the target that we want to start a transaction
   serial_output();
   serial_low();
-  _delay_us(1);
+  _delay_us(SLAVE_INT_WIDTH_US);
 
-  // wait for the slaves response
+#ifndef SERIAL_USE_MULTI_TRANSACTION
-  serial_input();
+  // wait for the target response
-  serial_high();
+  serial_input_with_pullup();
-  _delay_us(SERIAL_DELAY);
+  _delay_us(SLAVE_INT_RESPONSE_TIME);
 
-  // check if the slave is present
+  // check if the target is present
   if (serial_read_pin()) {
-    // slave failed to pull the line low, assume not present
+    // target failed to pull the line low, assume not present
-    sei();
-    return 1;
-  }
-
-  // if the slave is present syncronize with it
-  sync_recv();
-
-  uint8_t checksum_computed = 0;
-  // receive data from the slave
-  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
-    serial_slave_buffer[i] = serial_read_byte();
-    sync_recv();
-    checksum_computed += serial_slave_buffer[i];
-  }
-  uint8_t checksum_received = serial_read_byte();
-  sync_recv();
-
-  if (checksum_computed != checksum_received) {
-    sei();
-    return 2;
-  }
-
-  uint8_t checksum = 0;
-  // send data to the slave
-  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
-    serial_write_byte(serial_master_buffer[i]);
-    sync_recv();
-    checksum += serial_master_buffer[i];
-  }
-  serial_write_byte(checksum);
-  sync_recv();
-
-  // always, release the line when not in use
     serial_output();
     serial_high();
-
+    *trans->status = TRANSACTION_NO_RESPONSE;
     sei();
-  return 0;
+    return TRANSACTION_NO_RESPONSE;
+  }
+
+#else
+  // send transaction table index
+  sync_send();
+  _delay_sub_us(TID_SEND_ADJUST);
+  serial_write_chunk(sstd_index, 4);
+  serial_delay_half1();
+
+  // wait for the target response (step1 low->high)
+  serial_input_with_pullup();
+  while( !serial_read_pin() ) {
+      _delay_sub_us(2);
+  }
+
+  // check if the target is present (step2 high->low)
+  for( int i = 0; serial_read_pin(); i++ ) {
+      if (i > SLAVE_INT_ACK_WIDTH + 1) {
+	  // slave failed to pull the line low, assume not present
+	  serial_output();
+	  serial_high();
+	  *trans->status = TRANSACTION_NO_RESPONSE;
+	  sei();
+	  return TRANSACTION_NO_RESPONSE;
+      }
+      _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT);
+  }
+#endif
+
+  // initiator recive phase
+  // if the target is present syncronize with it
+  if( trans->target2initiator_buffer_size > 0 ) {
+      if (!serial_recive_packet((uint8_t *)trans->target2initiator_buffer,
+				trans->target2initiator_buffer_size) ) {
+	  serial_output();
+	  serial_high();
+	  *trans->status = TRANSACTION_DATA_ERROR;
+	  sei();
+	  return TRANSACTION_DATA_ERROR;
+      }
+   }
+
+  // initiator switch to output
+  change_reciver2sender();
+
+  // initiator send phase
+  if( trans->initiator2target_buffer_size > 0 ) {
+      serial_send_packet((uint8_t *)trans->initiator2target_buffer,
+			 trans->initiator2target_buffer_size);
+  }
+
+  // always, release the line when not in use
+  sync_send();
+
+  *trans->status = TRANSACTION_END;
+  sei();
+  return TRANSACTION_END;
 }
 
+#ifdef SERIAL_USE_MULTI_TRANSACTION
+int soft_serial_get_and_clean_status(int sstd_index) {
+    SSTD_t *trans = &Transaction_table[sstd_index];
+    cli();
+    int retval = *trans->status;
+    *trans->status = 0;;
+    sei();
+    return retval;
+}
+#endif
+
 #endif

keyboards/crkbd/serial.h

@@ -1,32 +1,77 @@
-#ifndef MY_SERIAL_H
+#pragma once
-#define MY_SERIAL_H
 
-#include "config.h"
 #include <stdbool.h>
 
-/* TODO:  some defines for interrupt setup */
+// /////////////////////////////////////////////////////////////////
-#define SERIAL_PIN_DDR DDRD
+// Need Soft Serial defines in serial_config.h
-#define SERIAL_PIN_PORT PORTD
+// /////////////////////////////////////////////////////////////////
-#define SERIAL_PIN_INPUT PIND
+// ex.
+//  #define SERIAL_PIN_DDR DDRD
+//  #define SERIAL_PIN_PORT PORTD
+//  #define SERIAL_PIN_INPUT PIND
+//  #define SERIAL_PIN_MASK _BV(PD?)   ?=0,2
+//  #define SERIAL_PIN_INTERRUPT INT?_vect  ?=0,2
+//
+// //// USE Simple API (OLD API, compatible with let's split serial.c)
+// ex.
+//  #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
+//  #define SERIAL_MASTER_BUFFER_LENGTH 1
+//
+// //// USE flexible API (using multi-type transaction function)
+//  #define SERIAL_USE_MULTI_TRANSACTION
+//
+// /////////////////////////////////////////////////////////////////
 
-#ifndef USE_SERIAL_PD2
-#define SERIAL_PIN_MASK _BV(PD0)
-#define SERIAL_PIN_INTERRUPT INT0_vect
-#else
-#define SERIAL_PIN_MASK _BV(PD2)
-#define SERIAL_PIN_INTERRUPT INT2_vect
-#endif
 
-#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
+#ifndef SERIAL_USE_MULTI_TRANSACTION
-#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2
+/* --- USE Simple API (OLD API, compatible with let's split serial.c) */
-
+#if SERIAL_SLAVE_BUFFER_LENGTH > 0
-// Buffers for master - slave communication
 extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
+#endif
+#if SERIAL_MASTER_BUFFER_LENGTH > 0
 extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
+#endif
 
 void serial_master_init(void);
 void serial_slave_init(void);
 int serial_update_buffers(void);
-bool serial_slave_data_corrupt(void);
 
+#endif // USE Simple API
+
+// Soft Serial Transaction Descriptor
+typedef struct _SSTD_t  {
+    uint8_t *status;
+    uint8_t initiator2target_buffer_size;
+    uint8_t *initiator2target_buffer;
+    uint8_t target2initiator_buffer_size;
+    uint8_t *target2initiator_buffer;
+} SSTD_t;
+
+// initiator is transaction start side
+void soft_serial_initiator_init(SSTD_t *sstd_table);
+// target is interrupt accept side
+void soft_serial_target_init(SSTD_t *sstd_table);
+
+// initiator resullt
+#define TRANSACTION_END 0
+#define TRANSACTION_NO_RESPONSE 0x1
+#define TRANSACTION_DATA_ERROR  0x2
+#ifndef SERIAL_USE_MULTI_TRANSACTION
+int  soft_serial_transaction(void);
+#else
+int  soft_serial_transaction(int sstd_index);
+#endif
+
+// target status
+// *SSTD_t.status has
+//   initiator:
+//       TRANSACTION_END
+//    or TRANSACTION_NO_RESPONSE
+//    or TRANSACTION_DATA_ERROR
+//   target:
+//       TRANSACTION_DATA_ERROR
+//    or TRANSACTION_ACCEPTED
+#define TRANSACTION_ACCEPTED 0x4
+#ifdef SERIAL_USE_MULTI_TRANSACTION
+int  soft_serial_get_and_clean_status(int sstd_index);
 #endif

keyboards/crkbd/ssd1306.c

@@ -123,6 +123,7 @@ static int8_t capture_sendchar(uint8_t c) {
 bool iota_gfx_init(bool rotate) {
   bool success = false;
 
+  i2c_master_init();
   send_cmd1(DisplayOff);
   send_cmd2(SetDisplayClockDiv, 0x80);
   send_cmd2(SetMultiPlex, DisplayHeight - 1);

keyboards/crkbd/ssd1306.h

@@ -1,10 +1,8 @@
-#ifndef SSD1306_H
+#pragma once
-#define SSD1306_H
 
 #include <stdbool.h>
 #include <stdio.h>
 #include "pincontrol.h"
-#include "config.h"
 
 enum ssd1306_cmds {
   DisplayOff = 0xAE,
@@ -88,7 +86,3 @@ void matrix_write(struct CharacterMatrix *matrix, const char *data);
 void matrix_write_ln(struct CharacterMatrix *matrix, const char *data);
 void matrix_write_P(struct CharacterMatrix *matrix, const char *data);
 void matrix_render(struct CharacterMatrix *matrix);
-
-
-
-#endif