[Docs] Add AVR and ARM examples to GPIO Commands (#6942)
* [Docs] Add AVR and ARM examples to GPIO Commands Add examples for reference for people not as well versed in microcontroller coding, such as myself. * Apply suggestions from code review Co-Authored-By: fauxpark <fauxpark@gmail.com> Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
This commit is contained in:
parent
dc5876a8e6
commit
403c139b34
1 changed files with 10 additions and 11 deletions
|
@ -6,18 +6,17 @@ QMK has a GPIO control abstraction layer which is microcontroller agnostic. This
|
|||
|
||||
The following functions can provide basic control of GPIOs and are found in `quantum/quantum.h`.
|
||||
|
||||
|Function |Description |
|
||||
|----------------------|------------------------------------------------------------------|
|
||||
|`setPinInput(pin)` |Set pin as input with high impedance (High-Z) |
|
||||
|`setPinInputHigh(pin)`|Set pin as input with build in pull-up |
|
||||
|`setPinInputLow(pin)` |Set pin as input with build in pull-down (Supported only on STM32)|
|
||||
|`setPinOutput(pin)` |Set pin as output |
|
||||
|`writePinHigh(pin)` |Set pin level as high, assuming it is an output |
|
||||
|`writePinLow(pin)` |Set pin level as low, assuming it is an output |
|
||||
|`writePin(pin, level)`|Set pin level, assuming it is an output |
|
||||
|`readPin(pin)` |Returns the level of the pin |
|
||||
|Function |Description | Old AVR Examples | Old ChibiOS/ARM Examples |
|
||||
|----------------------|------------------------------------------------------------------|------------------------------------------------|-------------------------------------------------|
|
||||
|`setPinInput(pin)` |Set pin as input with high impedance (High-Z) | `DDRB &= ~(1<<2)` | `palSetLineMode(pin, PAL_MODE_INPUT)` |
|
||||
|`setPinInputHigh(pin)`|Set pin as input with builtin pull-up resistor | `DDRB &= ~(1<<2); PORTB \|= (1<<2)` | `palSetLineMode(pin, PAL_MODE_INPUT_PULLUP)` |
|
||||
|`setPinInputLow(pin)` |Set pin as input with builtin pull-down resistor | N/A (Not supported on AVR) | `palSetLineMode(pin, PAL_MODE_INPUT_PULLDOWN)` |
|
||||
|`setPinOutput(pin)` |Set pin as output | `DDRB \|= (1<<2)` | `palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL)` |
|
||||
|`writePinHigh(pin)` |Set pin level as high, assuming it is an output | `PORTB \|= (1<<2)` | `palSetLine(pin)` |
|
||||
|`writePinLow(pin)` |Set pin level as low, assuming it is an output | `PORTB &= ~(1<<2)` | `palClearLine(pin)` |
|
||||
|`writePin(pin, level)`|Set pin level, assuming it is an output | `(level) ? PORTB \|= (1<<2) : PORTB &= ~(1<<2)` | `(level) ? palSetLine(pin) : palClearLine(pin)` |
|
||||
|`readPin(pin)` |Returns the level of the pin | `_SFR_IO8(pin >> 4) & _BV(pin & 0xF)` | `palReadLine(pin)` |
|
||||
|
||||
## Advanced Settings
|
||||
|
||||
Each microcontroller can have multiple advanced settings regarding its GPIO. This abstraction layer does not limit the use of architecture-specific functions. Advanced users should consult the datasheet of their desired device and include any needed libraries. For AVR, the standard avr/io.h library is used; for STM32, the ChibiOS [PAL library](http://chibios.sourceforge.net/docs3/hal/group___p_a_l.html) is used.
|
||||
|
||||
|
|
Loading…
Reference in a new issue