From 410984486b0a5c61174c6e4e5a3570f1b09f97dc Mon Sep 17 00:00:00 2001 From: MechMerlin <30334081+mechmerlin@users.noreply.github.com> Date: Sat, 6 Apr 2019 17:30:48 -0700 Subject: [PATCH] i2c_init update to work with atmega32a boards (#5562) * On i2c_init, enable two wire interface, twi interrupt, and slave address ACK along with pull up resistors. * thanks to some testing by drashna, we know that setting TWI doesn't work for all boards. Putting the new code into an ifdef block --- drivers/avr/i2c_master.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/avr/i2c_master.c b/drivers/avr/i2c_master.c index 0db949db4a..ba6d0d1586 100755 --- a/drivers/avr/i2c_master.c +++ b/drivers/avr/i2c_master.c @@ -18,6 +18,18 @@ void i2c_init(void) { TWSR = 0; /* no prescaler */ TWBR = (uint8_t)TWBR_val; + + #ifdef __AVR_ATmega32A__ + // set pull-up resistors on I2C bus pins + PORTC |= 0b11; + + // enable TWI (two-wire interface) + TWCR |= (1 << TWEN); + + // enable TWI interrupt and slave address ACK + TWCR |= (1 << TWIE); + TWCR |= (1 << TWEA); + #endif } i2c_status_t i2c_start(uint8_t address, uint16_t timeout) {