diff --git a/keyboards/atreus62/Makefile b/keyboards/atreus62/Makefile new file mode 100644 index 0000000000..4e2a6f00fd --- /dev/null +++ b/keyboards/atreus62/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif \ No newline at end of file diff --git a/keyboards/atreus62/atreus62.c b/keyboards/atreus62/atreus62.c new file mode 100644 index 0000000000..ba5bce9899 --- /dev/null +++ b/keyboards/atreus62/atreus62.c @@ -0,0 +1 @@ +#include "atreus62.h" \ No newline at end of file diff --git a/keyboards/atreus62/atreus62.h b/keyboards/atreus62/atreus62.h new file mode 100644 index 0000000000..eacf5b4513 --- /dev/null +++ b/keyboards/atreus62/atreus62.h @@ -0,0 +1,26 @@ +#ifndef ATREUS62_H +#define ATREUS62_H + +#include "quantum.h" + +void promicro_bootloader_jmp(bool program); + +// This a shortcut to help you visually see your layout. +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, \ + k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, KC_NO, k06, k07, k08, k09, k0a, k0b }, \ + { k10, k11, k12, k13, k14, k15, KC_NO, k16, k17, k18, k19, k1a, k1b }, \ + { k20, k21, k22, k23, k24, k25, KC_NO, k26, k27, k28, k29, k2a, k2b }, \ + { k30, k31, k32, k33, k34, k35, k46, k36, k37, k38, k39, k3a, k3b }, \ + { k40, k41, k42, k43, k44, k45, k47, k48, k49, k4a, k4b, k4c, k4d } \ +} + +#endif \ No newline at end of file diff --git a/keyboards/atreus62/config.h b/keyboards/atreus62/config.h new file mode 100644 index 0000000000..90a4aa05a6 --- /dev/null +++ b/keyboards/atreus62/config.h @@ -0,0 +1,83 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ + +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6062 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Profet +#define PRODUCT Atreus62 +#define DESCRIPTION q.m.k. keyboard firmware for Atreus62 + +/* key matrix size */ +// Rows are doubled-up +#define MATRIX_ROWS 5 +#define MATRIX_COLS 13 + +// wiring of each half +#define MATRIX_ROW_PINS { D2, D3, D1, D0, D4 } +#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, B5, B4, E6, D7, C6 } + +#define CATERINA_BOOTLOADER + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION ROW2COL + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +// #define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/atreus62/keymaps/default/keymap.c b/keyboards/atreus62/keymaps/default/keymap.c new file mode 100644 index 0000000000..52802c77b7 --- /dev/null +++ b/keyboards/atreus62/keymaps/default/keymap.c @@ -0,0 +1,71 @@ +// this is the style you want to emulate. +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, + +#include "atreus62.h" + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _DEFAULT 0 +#define _NAV 1 +#define _RESET 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_DEFAULT] = { /* qwerty */ + { KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_TRNS, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS }, + { KC_BSLS, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_TRNS, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_RBRC }, + { KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_TRNS, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT }, + { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_DELT, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LBRC }, + { KC_LCTL, KC_LGUI, KC_LALT, KC_GRV, MO(_NAV),KC_BSPC, KC_ENT, KC_SPC, KC_EQL, KC_MINS, KC_QUOT, KC_ENT, KC_RGUI } +}, + +[_NAV] = { + { TO(_DEFAULT), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11 }, + { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F12, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS }, + { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS }, + { TO(_RESET), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS }, + { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS } +}, + +[_RESET] = { + { TO(_DEFAULT), KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO }, + { KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO }, + { KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO }, + { KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO }, + { KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , RESET } +} + + +/* +[_TRNS] = { + { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS }, + { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS }, + { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS }, + { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS }, + { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS } +}, +*/ +}; + + + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch (id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } + else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/atreus62/pro_micro.h b/keyboards/atreus62/pro_micro.h new file mode 100644 index 0000000000..f9e7ed75d9 --- /dev/null +++ b/keyboards/atreus62/pro_micro.h @@ -0,0 +1,362 @@ +/* + pins_arduino.h - Pin definition functions for Arduino + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2007 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ +*/ + +#ifndef Pins_Arduino_h +#define Pins_Arduino_h + +#include + +// Workaround for wrong definitions in "iom32u4.h". +// This should be fixed in the AVR toolchain. +#undef UHCON +#undef UHINT +#undef UHIEN +#undef UHADDR +#undef UHFNUM +#undef UHFNUML +#undef UHFNUMH +#undef UHFLEN +#undef UPINRQX +#undef UPINTX +#undef UPNUM +#undef UPRST +#undef UPCONX +#undef UPCFG0X +#undef UPCFG1X +#undef UPSTAX +#undef UPCFG2X +#undef UPIENX +#undef UPDATX +#undef TCCR2A +#undef WGM20 +#undef WGM21 +#undef COM2B0 +#undef COM2B1 +#undef COM2A0 +#undef COM2A1 +#undef TCCR2B +#undef CS20 +#undef CS21 +#undef CS22 +#undef WGM22 +#undef FOC2B +#undef FOC2A +#undef TCNT2 +#undef TCNT2_0 +#undef TCNT2_1 +#undef TCNT2_2 +#undef TCNT2_3 +#undef TCNT2_4 +#undef TCNT2_5 +#undef TCNT2_6 +#undef TCNT2_7 +#undef OCR2A +#undef OCR2_0 +#undef OCR2_1 +#undef OCR2_2 +#undef OCR2_3 +#undef OCR2_4 +#undef OCR2_5 +#undef OCR2_6 +#undef OCR2_7 +#undef OCR2B +#undef OCR2_0 +#undef OCR2_1 +#undef OCR2_2 +#undef OCR2_3 +#undef OCR2_4 +#undef OCR2_5 +#undef OCR2_6 +#undef OCR2_7 + +#define NUM_DIGITAL_PINS 30 +#define NUM_ANALOG_INPUTS 12 + +#define TX_RX_LED_INIT DDRD |= (1<<5), DDRB |= (1<<0) +#define TXLED0 PORTD |= (1<<5) +#define TXLED1 PORTD &= ~(1<<5) +#define RXLED0 PORTB |= (1<<0) +#define RXLED1 PORTB &= ~(1<<0) + +static const uint8_t SDA = 2; +static const uint8_t SCL = 3; +#define LED_BUILTIN 13 + +// Map SPI port to 'new' pins D14..D17 +static const uint8_t SS = 17; +static const uint8_t MOSI = 16; +static const uint8_t MISO = 14; +static const uint8_t SCK = 15; + +// Mapping of analog pins as digital I/O +// A6-A11 share with digital pins +static const uint8_t ADC0 = 18; +static const uint8_t ADC1 = 19; +static const uint8_t ADC2 = 20; +static const uint8_t ADC3 = 21; +static const uint8_t ADC4 = 22; +static const uint8_t ADC5 = 23; +static const uint8_t ADC6 = 24; // D4 +static const uint8_t ADC7 = 25; // D6 +static const uint8_t ADC8 = 26; // D8 +static const uint8_t ADC9 = 27; // D9 +static const uint8_t ADC10 = 28; // D10 +static const uint8_t ADC11 = 29; // D12 + +#define digitalPinToPCICR(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0)) +#define digitalPinToPCICRbit(p) 0 +#define digitalPinToPCMSK(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0)) +#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4)))))) + +// __AVR_ATmega32U4__ has an unusual mapping of pins to channels +extern const uint8_t PROGMEM analog_pin_to_channel_PGM[]; +#define analogPinToChannel(P) ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) ) + +#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT))))) + +#ifdef ARDUINO_MAIN + +// On the Arduino board, digital pins are also used +// for the analog output (software PWM). Analog input +// pins are a separate set. + +// ATMEL ATMEGA32U4 / ARDUINO LEONARDO +// +// D0 PD2 RXD1/INT2 +// D1 PD3 TXD1/INT3 +// D2 PD1 SDA SDA/INT1 +// D3# PD0 PWM8/SCL OC0B/SCL/INT0 +// D4 A6 PD4 ADC8 +// D5# PC6 ??? OC3A/#OC4A +// D6# A7 PD7 FastPWM #OC4D/ADC10 +// D7 PE6 INT6/AIN0 +// +// D8 A8 PB4 ADC11/PCINT4 +// D9# A9 PB5 PWM16 OC1A/#OC4B/ADC12/PCINT5 +// D10# A10 PB6 PWM16 OC1B/0c4B/ADC13/PCINT6 +// D11# PB7 PWM8/16 0C0A/OC1C/#RTS/PCINT7 +// D12 A11 PD6 T1/#OC4D/ADC9 +// D13# PC7 PWM10 CLK0/OC4A +// +// A0 D18 PF7 ADC7 +// A1 D19 PF6 ADC6 +// A2 D20 PF5 ADC5 +// A3 D21 PF4 ADC4 +// A4 D22 PF1 ADC1 +// A5 D23 PF0 ADC0 +// +// New pins D14..D17 to map SPI port to digital pins +// +// MISO D14 PB3 MISO,PCINT3 +// SCK D15 PB1 SCK,PCINT1 +// MOSI D16 PB2 MOSI,PCINT2 +// SS D17 PB0 RXLED,SS/PCINT0 +// +// Connected LEDs on board for TX and RX +// TXLED D24 PD5 XCK1 +// RXLED D17 PB0 +// HWB PE2 HWB + +// these arrays map port names (e.g. port B) to the +// appropriate addresses for various functions (e.g. reading +// and writing) +const uint16_t PROGMEM port_to_mode_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &DDRB, + (uint16_t) &DDRC, + (uint16_t) &DDRD, + (uint16_t) &DDRE, + (uint16_t) &DDRF, +}; + +const uint16_t PROGMEM port_to_output_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &PORTB, + (uint16_t) &PORTC, + (uint16_t) &PORTD, + (uint16_t) &PORTE, + (uint16_t) &PORTF, +}; + +const uint16_t PROGMEM port_to_input_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &PINB, + (uint16_t) &PINC, + (uint16_t) &PIND, + (uint16_t) &PINE, + (uint16_t) &PINF, +}; + +const uint8_t PROGMEM digital_pin_to_port_PGM[] = { + PD, // D0 - PD2 + PD, // D1 - PD3 + PD, // D2 - PD1 + PD, // D3 - PD0 + PD, // D4 - PD4 + PC, // D5 - PC6 + PD, // D6 - PD7 + PE, // D7 - PE6 + + PB, // D8 - PB4 + PB, // D9 - PB5 + PB, // D10 - PB6 + PB, // D11 - PB7 + PD, // D12 - PD6 + PC, // D13 - PC7 + + PB, // D14 - MISO - PB3 + PB, // D15 - SCK - PB1 + PB, // D16 - MOSI - PB2 + PB, // D17 - SS - PB0 + + PF, // D18 - A0 - PF7 + PF, // D19 - A1 - PF6 + PF, // D20 - A2 - PF5 + PF, // D21 - A3 - PF4 + PF, // D22 - A4 - PF1 + PF, // D23 - A5 - PF0 + + PD, // D24 - PD5 + PD, // D25 / D6 - A7 - PD7 + PB, // D26 / D8 - A8 - PB4 + PB, // D27 / D9 - A9 - PB5 + PB, // D28 / D10 - A10 - PB6 + PD, // D29 / D12 - A11 - PD6 +}; + +const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { + _BV(2), // D0 - PD2 + _BV(3), // D1 - PD3 + _BV(1), // D2 - PD1 + _BV(0), // D3 - PD0 + _BV(4), // D4 - PD4 + _BV(6), // D5 - PC6 + _BV(7), // D6 - PD7 + _BV(6), // D7 - PE6 + + _BV(4), // D8 - PB4 + _BV(5), // D9 - PB5 + _BV(6), // D10 - PB6 + _BV(7), // D11 - PB7 + _BV(6), // D12 - PD6 + _BV(7), // D13 - PC7 + + _BV(3), // D14 - MISO - PB3 + _BV(1), // D15 - SCK - PB1 + _BV(2), // D16 - MOSI - PB2 + _BV(0), // D17 - SS - PB0 + + _BV(7), // D18 - A0 - PF7 + _BV(6), // D19 - A1 - PF6 + _BV(5), // D20 - A2 - PF5 + _BV(4), // D21 - A3 - PF4 + _BV(1), // D22 - A4 - PF1 + _BV(0), // D23 - A5 - PF0 + + _BV(5), // D24 - PD5 + _BV(7), // D25 / D6 - A7 - PD7 + _BV(4), // D26 / D8 - A8 - PB4 + _BV(5), // D27 / D9 - A9 - PB5 + _BV(6), // D28 / D10 - A10 - PB6 + _BV(6), // D29 / D12 - A11 - PD6 +}; + +const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + TIMER0B, /* 3 */ + NOT_ON_TIMER, + TIMER3A, /* 5 */ + TIMER4D, /* 6 */ + NOT_ON_TIMER, + + NOT_ON_TIMER, + TIMER1A, /* 9 */ + TIMER1B, /* 10 */ + TIMER0A, /* 11 */ + + NOT_ON_TIMER, + TIMER4A, /* 13 */ + + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, +}; + +const uint8_t PROGMEM analog_pin_to_channel_PGM[] = { + 7, // A0 PF7 ADC7 + 6, // A1 PF6 ADC6 + 5, // A2 PF5 ADC5 + 4, // A3 PF4 ADC4 + 1, // A4 PF1 ADC1 + 0, // A5 PF0 ADC0 + 8, // A6 D4 PD4 ADC8 + 10, // A7 D6 PD7 ADC10 + 11, // A8 D8 PB4 ADC11 + 12, // A9 D9 PB5 ADC12 + 13, // A10 D10 PB6 ADC13 + 9 // A11 D12 PD6 ADC9 +}; + +#endif /* ARDUINO_MAIN */ + +// These serial port names are intended to allow libraries and architecture-neutral +// sketches to automatically default to the correct port name for a particular type +// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, +// the first hardware serial port whose RX/TX pins are not dedicated to another use. +// +// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor +// +// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial +// +// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library +// +// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. +// +// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX +// pins are NOT connected to anything by default. +#define SERIAL_PORT_MONITOR Serial +#define SERIAL_PORT_USBVIRTUAL Serial +#define SERIAL_PORT_HARDWARE Serial1 +#define SERIAL_PORT_HARDWARE_OPEN Serial1 + +#endif /* Pins_Arduino_h */ diff --git a/keyboards/atreus62/readme.md b/keyboards/atreus62/readme.md new file mode 100644 index 0000000000..0245b4f9f0 --- /dev/null +++ b/keyboards/atreus62/readme.md @@ -0,0 +1,10 @@ +atreus62 keyboard firmware +====================== + +This firmware is for the atreus62 keyboard. + +This version utilizes a Pro Micro for its controller and has a 62 key layout. + +https://github.com/profet23/atreus62 + +TODO: More information \ No newline at end of file diff --git a/keyboards/atreus62/rules.mk b/keyboards/atreus62/rules.mk new file mode 100644 index 0000000000..f5d0be23ac --- /dev/null +++ b/keyboards/atreus62/rules.mk @@ -0,0 +1,66 @@ + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +#BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +#MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= yes # Unicode +#BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend diff --git a/keyboards/ergodox/infinity/infinity.c b/keyboards/ergodox/infinity/infinity.c index c5793385fe..02db67eaf2 100644 --- a/keyboards/ergodox/infinity/infinity.c +++ b/keyboards/ergodox/infinity/infinity.c @@ -38,7 +38,6 @@ void init_serial_link_hal(void) { // Using a higher pre-scalar without flicker is possible but FTM0_MOD will need to be reduced // Which will reduce the brightness range #define PRESCALAR_DEFINE 0 -#ifdef VISUALIZER_ENABLE void lcd_backlight_hal_init(void) { // Setup Backlight SIM->SCGC6 |= SIM_SCGC6_FTM0; @@ -76,7 +75,6 @@ void lcd_backlight_hal_color(uint16_t r, uint16_t g, uint16_t b) { CHANNEL_GREEN.CnV = g; CHANNEL_BLUE.CnV = b; } -#endif __attribute__ ((weak)) void matrix_init_user(void) { @@ -92,6 +90,10 @@ void matrix_init_kb(void) { // runs once when the firmware starts up matrix_init_user(); + // The backlight always has to be initialized, otherwise it will stay lit +#ifndef VISUALIZER_ENABLE + lcd_backlight_hal_init(); +#endif } void matrix_scan_kb(void) { diff --git a/keyboards/ergodox/infinity/led.c b/keyboards/ergodox/infinity/led.c index 77195bb358..8175c1c5c5 100644 --- a/keyboards/ergodox/infinity/led.c +++ b/keyboards/ergodox/infinity/led.c @@ -21,29 +21,6 @@ along with this program. If not, see . void led_set(uint8_t usb_led) { -// The LCD backlight functionality conflicts with this simple -// red backlight -#if !defined(LCD_BACKLIGHT_ENABLE) && defined(STATUS_LED_ENABLE) - // PTC1: LCD Backlight Red(0:on/1:off) - GPIOC->PDDR |= (1<<1); - PORTC->PCR[1] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1); - if (usb_led & (1<PCOR |= (1<<1); - } else { - GPIOC->PSOR |= (1<<1); - } -#elif !defined(LCD_BACKLIGHT_ENABLE) + //TODO: Add led emulation if there's no customized visualization (void)usb_led; - GPIOC->PDDR |= (1<<1); - PORTC->PCR[1] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1); - GPIOC->PSOR |= (1<<1); - GPIOC->PDDR |= (1<<2); - PORTC->PCR[2] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1); - GPIOC->PSOR |= (1<<2); - GPIOC->PDDR |= (1<<3); - PORTC->PCR[3] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1); - GPIOC->PSOR |= (1<<3); -#else - (void)usb_led; -#endif } diff --git a/keyboards/ergodox/keymaps/dvorak_emacs/keymap.c b/keyboards/ergodox/keymaps/dvorak_emacs/keymap.c new file mode 100755 index 0000000000..d33c6e5271 --- /dev/null +++ b/keyboards/ergodox/keymaps/dvorak_emacs/keymap.c @@ -0,0 +1,165 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +/****************************************************************************************** + * DVORAK LAYOUT (see http://djelibeibi.unex.es/dvorak/) + * Layer 1: auxiliary keys + * Layer 2: full qwerty layout + *****************************************************************************************/ + +// LAYERS +#define BASE 0 // dvorak layout (default) +#define AUX 1 // auxiliary keys + +// MACROS +/* #define OBRACE 0 // key { or shift */ +/* #define CBRACE 1 // key } or shift */ +/* #define OBRACK 2 // key [ or left alt */ +/* #define CBRACK 3 // key ] or left alt */ +/* #define CAPS 4 // caps lock */ + +// LEDS +#define USB_LED_NUM_LOCK 0 +#define USB_LED_CAPS_LOCK 1 +#define USB_LED_SCROLL_LOCK 2 +#define USB_LED_COMPOSE 3 +#define USB_LED_KANA 4 + +// TIMERS +#define KEY_TAP_FAST 85 +#define KEY_TAP_SLOW 95 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Base layer + * Keys with double values (like Esc/Ctrl) correspond to the 'tapped' key and the 'held' key, respectively + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | 1 | 2 | 3 | 4 | 5 | Esc | | Esc | 6 | 7 | 8 | 9 | 0 | = / + | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | ~ |" / ' |, / < |. / > | P | Y | [ | | ] | F | G | C | H | L | / / ? | + * |--------+------+------+------+------+------| { | | } |------+------+------+------+------+--------| + * | Tab | A | O | E |U/LSft| I/L1 |------| |------| D/L1|R/RSft| T | N | S | - / _ | + * |--------+------+------+------+------+------| LGUI | | LGUI |------+------+------+------+------+--------| + * | {/LSft |; / : | Q | J | K | X | | | | B | M | W | V | Z | }/RSft | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | ~L1 | | ~L1 | | | \ / || | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | HOME | END | | LEFT | RIGHT| + * ,------|------|------| |------+--------+------. + * | BSPC | DEL | PGUP | | UP | SPACE |RETURN| + * | / | / |------| |------| / | / | + * | LCTL | LALT |PGDWN | | DOWN | LALT | LCTL | + * `--------------------' `----------------------' + * + */ +[BASE] = KEYMAP( + // left hand + KC_NO, KC_1, KC_2, KC_3, KC_4, KC_5, KC_ESC, + KC_TILD, KC_QUOTE, KC_COMM,KC_DOT, KC_P, KC_Y, KC_LBRACKET, + KC_TAB, KC_A, KC_O, KC_E, SFT_T(KC_U), LT(AUX, KC_I), + SFT_T(KC_LBRC), KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_LGUI, + KC_NO, KC_NO, KC_NO, KC_NO, MO(AUX), + KC_HOME, KC_END, + KC_PGUP, + CTL_T(KC_BSPC), ALT_T(KC_DEL), KC_PGDN, + // right hand + KC_ESC, KC_6, KC_7, KC_8, KC_9, KC_0, KC_EQL, + KC_RBRACKET, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLASH, + LT(AUX, KC_D), SFT_T(KC_H), KC_T, KC_N, KC_S, KC_MINUS, + KC_LGUI, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_T(KC_RBRC), + MO(AUX), KC_NO, KC_NO, KC_BSLASH, KC_NO, + KC_LEFT, KC_RIGHT, + KC_UP, + KC_DOWN, ALT_T(KC_ENT), CTL_T(KC_SPC) + ), +/* Keymap 1: Aux layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | VolUp | | | | | | SLEEP | PWR | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | VolDn | F1 | F2 | F3 | F4 | | | | | | 7 | 8 | 9 | * | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | F5 | F6 | F7 | F8 | TRANS|------| |------|TRANS | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | |PSCR |------+------+------+------+------+--------| + * | TRANS | F9 | F10 | F11 | F12 | | | | | | 1 | 2 | 3 | / | TRANS | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |CTRL-S|CTRL-Z|CTRL-X|CTRL-C| TRANS| | TRANS| . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | TRANS| TRANS| | TRANS| TRANS| + * ,------|------|------| |------+------+------. + * | | | TRANS| | TRANS| | | + * |TRANS |TRANS |------| |------| TRANS| TRANS| + * | | | TRANS| | TRANS| | | + * `--------------------' `--------------------' + */ +[AUX] = KEYMAP( + // left hand + KC_VOLU, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_SLEP, + KC_VOLD, KC_F1, KC_F2, KC_F3, KC_F4, KC_NO, KC_NO, + KC_NO , KC_F5, KC_F6, KC_F7, KC_F8, KC_TRNS, + KC_TRNS, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_NO, + LCTL(KC_S), LCTL(KC_Z), LCTL(KC_X), LCTL(KC_C), KC_TRNS, + KC_TRNS , KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_PWR, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_7, KC_8, KC_9, KC_PAST, KC_NO, + KC_TRNS, KC_4, KC_5, KC_6, KC_PPLS, KC_NO, + KC_PSCR, KC_NO, KC_1, KC_2, KC_3, KC_PSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_PEQL, KC_NO, + KC_TRNS , KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(AUX) // FN1 - Momentary Layer 1 (Aux) +}; + + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } +} diff --git a/keyboards/ergodox/keymaps/dvorak_emacs/readme.md b/keyboards/ergodox/keymaps/dvorak_emacs/readme.md new file mode 100644 index 0000000000..a3fc34afeb --- /dev/null +++ b/keyboards/ergodox/keymaps/dvorak_emacs/readme.md @@ -0,0 +1,70 @@ +# Ergodox Dvorak Layout with emacs binding in mind + * Control & Alt key on the thumbs (activated if pressed with another key). + * In the same way, "U" and "R" are the shift modifier if pressed with another key. + * "I" and "D" set the layer 1 for the auxiliary keys if pressed with another key. + * Software layout set to english. + +## Keymap Layers + - L0: dvorak with some customizations (see layout below) + - L1: auxiliary keys (includes function keys, numpad...) + + +### Keymap 0: Base layer +Keys with double values (like U/LSft) correspond to the 'tapped' key and the 'held' key, respectively + +

+
+,--------------------------------------------------.           ,--------------------------------------------------.
+|        |   1  |   2  |   3  |   4  |   5  |  Esc |           |  Esc |   6  |   7  |   8  |   9  |   0  |   =    |
+|--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+|   ~    |  '   |   ,  |   .  |   P  |   Y  |   [  |           |   ]  |   F  |   G  |   C  |   H  |   L  |   /    |
+|--------+------+------+------+------+------|   {  |           |   }  |------+------+------+------+------+--------|
+|  Tab   |   A  |   O  |   E  |U/LSft| I/L1 |------|           |------|  D/L1|R/RSft|   T  |   N  |   S  |   -    |
+|--------+------+------+------+------+------| LGUI |           | LGUI |------+------+------+------+------+--------|
+| {/LSft |   ;  |   Q  |   J  |   K  |   X  |      |           |      |   B  |   M  |   W  |   V  |   Z  | }/RSft |
+`--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+  |      |      |      |      | ~L1  |                                       | ~L1  |      |      |   \  |      |
+  `----------------------------------'                                       `----------------------------------'
+                                       ,-------------.       ,-------------.
+                                       | HOME |  END |       | LEFT | RIGHT|
+                                ,------|------|------|       |------+--------+------.
+                                | BSPC |  DEL | PGUP |       |  UP  | SPACE  |RETURN|
+                                |  /   |  /   |------|       |------|   /    |  /   |
+                                | LCTL | LALT |PGDWN |       | DOWN | LALT   | LCTL |
+                                `--------------------'       `----------------------'
+
+
+ +### Keymap 1: Aux layer + +

+
+,--------------------------------------------------.           ,--------------------------------------------------.
+|  VolUp |      |      |      |      |      | SLEEP            | PWR  |      |      |      |      |      |        |
+|--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+|  VolDn |  F1  |  F2  |  F3  |  F4  |      |      |           |      |      |   7  |   8  |   9  |   *  |        |
+|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+|        |  F5  |  F6  |  F7  |  F8  | TRANS|------|           |------|TRANS |   4  |   5  |   6  |   +  |        |
+|--------+------+------+------+------+------|      |           |PSCR  |------+------+------+------+------+--------|
+|  TRANS |  F9  |  F10 |  F11 |  F12 |      |      |           |      |      |   1  |   2  |   3  |   /  |  TRANS |
+`--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+  |CTRL-S|CTRL-Z|CTRL-X|CTRL-C| TRANS|                                       | TRANS|    . |   0  |   =  |      |
+  `----------------------------------'                                       `----------------------------------'
+                                       ,-------------.       ,-------------.
+                                       | TRANS| TRANS|       | TRANS| TRANS|
+                                ,------|------|------|       |------+------+------.
+                                |      |      | TRANS|       | TRANS|      |      |
+                                |TRANS |TRANS |------|       |------| TRANS| TRANS|
+                                |      |      | TRANS|       | TRANS|      |      |
+                                `--------------------'       `--------------------'
+
+
+ + + +## Generation of .hex file +> In the "qmk_firmware/keyboards/ergodox" directory. + +> Execute "make dvorak_emacs". Then the hex file "ergodox_ez_dvorak_emacs.hex" is in the root directory : "qmk_firmware". + +> Flash with `teensy_loader` binary diff --git a/keyboards/ergodox/keymaps/galson/Makefile b/keyboards/ergodox/keymaps/galson/Makefile new file mode 100644 index 0000000000..f008f50793 --- /dev/null +++ b/keyboards/ergodox/keymaps/galson/Makefile @@ -0,0 +1,2 @@ +COMMAND_ENABLE = no # Commands for debug and configuration + diff --git a/keyboards/ergodox/keymaps/galson/keymap.c b/keyboards/ergodox/keymaps/galson/keymap.c new file mode 100644 index 0000000000..0d3e7560dd --- /dev/null +++ b/keyboards/ergodox/keymaps/galson/keymap.c @@ -0,0 +1,183 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "version.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | + | 1 | 2 | 3 | 4 | 5 | rclk | | lclk | 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | = | Q | W | E | R |cmd/T |shift | |shift |cmd/Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| ( | | ) |------+------+------+------+------+--------| + * | " | A | S | D | F | G |------| |------| H | J | K | L |; / L2| ' | + * |--------+------+------+------+------+------| ctrl | | ctrl |------+------+------+------+------+--------| + * | { | Z | X | C | V | B | [ | | ] | N | M | , | . | / | } | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | _ | ` | $ | Left | Right| | Up | Down | : | * | ! | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | < | | | | & | > | + * ,------|------|------| |------+--------+------. + * | | | # | | @ | | | + * | Space|Backsp|------| |------| Tab |Enter | + * | |ace | % | | ESC | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_PLUS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_BTN2, + KC_EQL, KC_Q, KC_W, KC_E, KC_R, GUI_T(KC_T), KC_LSPO, + KC_DQUO, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LCBR, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, CTL_T(KC_LBRC), + KC_UNDS, KC_GRV, KC_DLR, KC_LEFT,KC_RGHT, + KC_LABK, KC_PIPE, + KC_HASH, + KC_SPC, KC_BSPC,KC_PERC, + // right hand + KC_BTN1, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + KC_RSPC, GUI_T(KC_Y), KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN), KC_QUOT, + CTL_T(KC_RBRC), KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RCBR, + KC_UP, KC_DOWN,KC_COLN,KC_ASTR, KC_EXLM, + KC_AMPR, KC_RABK, + KC_AT, + KC_ESC, KC_TAB, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. + * |Version | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + M(0), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/galson/readme.md b/keyboards/ergodox/keymaps/galson/readme.md new file mode 100644 index 0000000000..ebc916725b --- /dev/null +++ b/keyboards/ergodox/keymaps/galson/readme.md @@ -0,0 +1,11 @@ +# Galson keymap + + +Sep 26, 2016. + +This is an ergonomic layout for programming for those with typing-related injuries. Key features: + +- As many symbol keys as possible are accessible without shifting. These should be accessed by moving the entire hand and pressing with a strong finger. +- Arrow keys and left and right mouse clicks for mouse-free navigation when combined with head mouse or eyetracker. +- Modifier keys are dual role and relocated to positions convenient for the index finger. +- Positions are more convenient when the keyboard is vertically mounted (as it should be!) \ No newline at end of file diff --git a/keyboards/hhkb/keymaps/sh_jp/Makefile b/keyboards/hhkb/keymaps/sh_jp/Makefile new file mode 100644 index 0000000000..a7f700f019 --- /dev/null +++ b/keyboards/hhkb/keymaps/sh_jp/Makefile @@ -0,0 +1 @@ +OPT_DEFS += -DHHKB_JP diff --git a/keyboards/hhkb/keymaps/sh_jp/README.md b/keyboards/hhkb/keymaps/sh_jp/README.md new file mode 100644 index 0000000000..4f82f2f4e9 --- /dev/null +++ b/keyboards/hhkb/keymaps/sh_jp/README.md @@ -0,0 +1,86 @@ +###Keymaps with both Dvorak layout and QWER layout for HHKB JP. + +1. The default layout is Dvorak. +2. Use `Tog` to toggle between Dvorak and QWER +3. Holding `NewCmd`, the original `LftCmd`, will activate the `NewCmd` layer which means `NewCmd+key` is the same as `Cmd+key` in normal QWER layout.[1](#cmdTab) + - For example, no matter you are in Dvorak layout or QWER layout, you can use `Cmd+s` to save a currently editing file. +4. `Symb` makes type symbols easier + - for example: `Symb+a` is `!`. +5. `Spc+key` equals to `Shft+key` while using `Spc` alone will yield a space as usual. +6. There's an extra `Tab` in the last line. + +``` +Layer DVOR: +,-----------------------------------------------------------. +|Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| |Bsp| +|-----------------------------------------------------------| +|Tab | '| ,| .| P| Y| F| G| C| R| L| /| =| | +|------------------------------------------------------` Ent| +|Ctrl | A| O| E| U| I| D| H| T| N| S| -| \| | +|-----------------------------------------------------------| +|Shft | ;| Q| J| K| X| B| M| W| V| Z| | Up| | +|-----------------------------------------------------------| +|FN| `| Alt|NewCmd|Symb| Spc |Symb|Tab|RCmd|Tog|Lft|Dwn|Rgh| +`-----------------------------------------------------------' +``` + +``` +Layer QWER: +,-----------------------------------------------------------. +|Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 10| -| =| |Bsp| +|-----------------------------------------------------------| +|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | +|------------------------------------------------------` Ent| +|Ctrl | A| S| D| F| G| H| J| K| L| ;| '| \| | +|-----------------------------------------------------------| +|Shft | Z| X| C| V| B| N| M| ,| .| /| | Up| | +|-----------------------------------------------------------| +|FN| `| Alt|NewCmd|Symb| Spc |Symb|Tab|Cmd|Tog|Lft|Dwn|Rgh| +`-----------------------------------------------------------' +``` + +``` +Layer Symb: +,-----------------------------------------------------------. +| | | | | | | | | | | | | | | | +|-----------------------------------------------------------| +| | | | [| ]| | | {| }| | | | | | +|------------------------------------------------------` | +| | !| @| #| $| %| ^| &| *| (| )| '| \| | +|-----------------------------------------------------------| +| | | | | | | | | | | | | | | +|-----------------------------------------------------------| +| | | | | | | | | | | | | | +`-----------------------------------------------------------' +``` + +``` +Layer FUNC: HHKB mode (HHKB Fn) +,-----------------------------------------------------------. +|Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| +|-----------------------------------------------------------| +|Caps | | | | | | | |Psc|Slk|Pus|Up | | | +|------------------------------------------------------` | +| |VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig| | | +|-----------------------------------------------------------| +| | | | | | | +| -|End|PgD|Dow| | | | +|-----------------------------------------------------------| +| || | | | | | | | | || | | | +`-----------------------------------------------------------' +``` + +``` +Empty Layer: +,-----------------------------------------------------------. +| | | | | | | | | | | | | | | | +|-----------------------------------------------------------| +| | | | | | | | | | | | | | | +|------------------------------------------------------` | +| | | | | | | | | | | | | | | +|-----------------------------------------------------------| +| | | | | | | | | | | | | | | +|-----------------------------------------------------------| +| | | | | | | | | | | | | | +`-----------------------------------------------------------' +``` +1: `NewCmd + Tab` does not work, you can use `RCmd+Tab` to switch among applications. diff --git a/keyboards/hhkb/keymaps/sh_jp/keymap.c b/keyboards/hhkb/keymaps/sh_jp/keymap.c new file mode 100644 index 0000000000..d4cb3b0418 --- /dev/null +++ b/keyboards/hhkb/keymaps/sh_jp/keymap.c @@ -0,0 +1,60 @@ +#include "hhkb.h" + +#define _______ KC_TRNS + +enum { + DVOR, + QWER, + NEW_CMD, + SYMB, + FUNC +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [DVOR] = KEYMAP_JP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_JYEN, KC_BSPC, + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, + KC_LCTL, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_BSLS, KC_ENT, + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RO, KC_UP, KC_RSFT, + MO(FUNC), KC_ZKHK, KC_LALT, MO(NEW_CMD), MO(SYMB), MT(MOD_LSFT, KC_SPC), MO(SYMB), KC_TAB, KC_RGUI, TG(QWER), KC_LEFT, KC_DOWN, KC_RGHT + ), + [QWER] = KEYMAP_JP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_JYEN, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_UP, KC_RSFT, + MO(FUNC), KC_ZKHK, KC_LALT, MO(NEW_CMD), MO(SYMB), MT(MOD_LSFT, KC_SPC), MO(SYMB), KC_TAB, KC_RGUI, _______, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [NEW_CMD] = KEYMAP_JP( + _______, LGUI(KC_1), LGUI(KC_2), LGUI(KC_3), LGUI(KC_4), LGUI(KC_5), LGUI(KC_6), LGUI(KC_7), LGUI(KC_8), LGUI(KC_9), LGUI(KC_0), _______, _______, _______, LGUI(KC_BSPC), + _______, LGUI(KC_Q), LGUI(KC_W), LGUI(KC_E), LGUI(KC_R), LGUI(KC_T), LGUI(KC_Y), LGUI(KC_U), LGUI(KC_I), LGUI(KC_O), LGUI(KC_P), LGUI(KC_LBRC), LGUI(KC_RBRC), + _______, LGUI(KC_A), LGUI(KC_S), LGUI(KC_D), LGUI(KC_F), LGUI(KC_G), LGUI(KC_H), LGUI(KC_J), LGUI(KC_K), LGUI(KC_L), _______, _______, _______, _______, + LGUI(KC_LSFT), LGUI(KC_Z), LGUI(KC_X), LGUI(KC_C), LGUI(KC_V), LGUI(KC_B), LGUI(KC_N), LGUI(KC_M), LGUI(KC_COMM), LGUI(KC_DOT), LGUI(KC_SLSH), _______, _______, _______, + _______, _______, _______, _______, _______, LGUI(KC_SPC), _______, _______, _______, _______, LGUI(KC_LEFT), LGUI(KC_DOWN), LGUI(KC_RGHT) + ), + + [SYMB] = KEYMAP_JP( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, KC_LBRC, KC_RBRC, _______, _______, LSFT(KC_LBRC), LSFT(KC_RBRC), _______, _______,_______, _______, + _______, LSFT(KC_1),LSFT(KC_2),LSFT(KC_3),LSFT(KC_4), LSFT(KC_5), LSFT(KC_6), LSFT(KC_7), LSFT(KC_8), LSFT(KC_9), LSFT(KC_0), _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [FUNC] = KEYMAP_JP( + KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, + KC_CAPS, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, _______, + _______, KC_VOLD, KC_VOLU, KC_MUTE, KC_PWR, _______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, _______, KC_PENT, + _______, _______, _______, _______, _______, _______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, _______, _______, _______, + _______, _______, _______, _______, _______, _______ , _______, _______, _______, _______, _______, _______, _______ + ) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t macro_id, uint8_t opt) { + return MACRO_NONE; +} + +const uint16_t PROGMEM fn_actions[] = { + +}; diff --git a/keyboards/maxipad/config.h b/keyboards/maxipad/config.h index fbe64a5b0b..fc5ab77617 100644 --- a/keyboards/maxipad/config.h +++ b/keyboards/maxipad/config.h @@ -43,9 +43,15 @@ along with this program. If not, see . * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) * */ -#define MATRIX_ROW_PINS { B6, F7, B2, B3, B1 } -#define MATRIX_COL_PINS { F6, C6, D7, F5, B4, B5 } -#define UNUSED_PINS +//Pro micro pinout + #define MATRIX_ROW_PINS { B6, B2, B3, B1, F7 } + #define MATRIX_COL_PINS { F4, C6, D7, F5, B4, B5 } + #define UNUSED_PINS +//Teensy 2 pinout + //#define MATRIX_ROW_PINS { B6, F7, B2, B3, B1 } + //#define MATRIX_COL_PINS { F6, C6, D7, F5, B4, B5 } + //#define UNUSED_PINS + /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW diff --git a/keyboards/maxipad/readme.md b/keyboards/maxipad/readme.md index ab7b122fe8..de2265d111 100644 --- a/keyboards/maxipad/readme.md +++ b/keyboards/maxipad/readme.md @@ -5,6 +5,8 @@ For the full Quantum feature list, see [the parent readme](/). ## Building +Change the config.h pinout to match your mcu!! + Download or clone the whole firmware and navigate to the keyboards/maxipad folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. Depending on which keymap you would like to use, you will have to compile slightly differently. diff --git a/keyboards/maxipad/rules.mk b/keyboards/maxipad/rules.mk index 55898147dd..56b2042efa 100644 --- a/keyboards/maxipad/rules.mk +++ b/keyboards/maxipad/rules.mk @@ -64,4 +64,4 @@ BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by MIDI_ENABLE ?= no # MIDI controls UNICODE_ENABLE ?= no # Unicode BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 +AUDIO_ENABLE ?= no # Audio output on port C6 \ No newline at end of file diff --git a/quantum/quantum.c b/quantum/quantum.c index 8b2fefef65..f9f1ef22d0 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -1,5 +1,9 @@ #include "quantum.h" +#ifndef TAPPING_TERM +#define TAPPING_TERM 200 +#endif + static void do_code16 (uint16_t code, void (*f) (uint8_t)) { switch (code) { case QK_MODS ... QK_MODS_MAX: @@ -75,6 +79,7 @@ void reset_keyboard(void) { #endif static bool shift_interrupted[2] = {0, 0}; +static uint16_t scs_timer = 0; bool process_record_quantum(keyrecord_t *record) { @@ -286,6 +291,7 @@ bool process_record_quantum(keyrecord_t *record) { case KC_LSPO: { if (record->event.pressed) { shift_interrupted[0] = false; + scs_timer = timer_read (); register_mods(MOD_BIT(KC_LSFT)); } else { @@ -295,7 +301,7 @@ bool process_record_quantum(keyrecord_t *record) { shift_interrupted[1] = true; } #endif - if (!shift_interrupted[0]) { + if (!shift_interrupted[0] && timer_elapsed(scs_timer) < TAPPING_TERM) { register_code(LSPO_KEY); unregister_code(LSPO_KEY); } @@ -308,6 +314,7 @@ bool process_record_quantum(keyrecord_t *record) { case KC_RSPC: { if (record->event.pressed) { shift_interrupted[1] = false; + scs_timer = timer_read (); register_mods(MOD_BIT(KC_RSFT)); } else { @@ -317,7 +324,7 @@ bool process_record_quantum(keyrecord_t *record) { shift_interrupted[1] = true; } #endif - if (!shift_interrupted[1]) { + if (!shift_interrupted[1] && timer_elapsed(scs_timer) < TAPPING_TERM) { register_code(RSPC_KEY); unregister_code(RSPC_KEY); }