diff --git a/keyboards/thedogkeyboard/config.h b/keyboards/thedogkeyboard/config.h
new file mode 100644
index 0000000000..1a67a3f172
--- /dev/null
+++ b/keyboards/thedogkeyboard/config.h
@@ -0,0 +1,246 @@
+/*
+Copyright 2019 kakunpc
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0000
+#define DEVICE_VER 0x0001
+#define MANUFACTURER kakunpc
+#define PRODUCT thedogkeyboard
+#define DESCRIPTION A custom keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 20
+#define MATRIX_COLS 6
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3, B2, B6, B4, B5 }
+#define MATRIX_COL_PINS { D1, D0, D4, C6, D7, E6 }
+#define UNUSED_PINS
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+#define RGB_DI_PIN D3
+#ifdef RGB_DI_PIN
+   #define RGBLED_NUM 111
+   #define RGBLIGHT_HUE_STEP 8
+   #define RGBLIGHT_SAT_STEP 8
+   #define RGBLIGHT_VAL_STEP 8
+   #define RGBLIGHT_LIMIT_VAL 50 /* The maximum brightness level */
+   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+//   /*==== use exp() and sin() ====*/
+//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/thedogkeyboard/info.json b/keyboards/thedogkeyboard/info.json
new file mode 100644
index 0000000000..517aae221b
--- /dev/null
+++ b/keyboards/thedogkeyboard/info.json
@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "TheDogKeyboard",
+    "url": "https://kakunpc.booth.pm/",
+    "maintainer": "kakunpc",
+    "width": 22.5,
+    "height": 6.5,
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [{"label":"1", "x":0, "y":0}, {"label":"7", "x":2, "y":0}, {"label":"13", "x":3, "y":0}, {"label":"19", "x":4, "y":0}, {"label":"24", "x":5, "y":0}, {"label":"29", "x":6.5, "y":0}, {"label":"35", "x":7.5, "y":0}, {"label":"40", "x":8.5, "y":0}, {"label":"45", "x":9.5, "y":0}, {"label":"50", "x":11, "y":0}, {"label":"56", "x":12, "y":0}, {"label":"62", "x":13, "y":0}, {"label":"66", "x":14, "y":0}, {"label":"70", "x":15.25, "y":0}, {"label":"76", "x":16.25, "y":0}, {"label":"82", "x":17.25, "y":0}, {"label":"2", "x":0, "y":1.5}, {"label":"8", "x":1, "y":1.5}, {"label":"14", "x":2, "y":1.5}, {"label":"20", "x":3, "y":1.5}, {"label":"25", "x":4, "y":1.5}, {"label":"30", "x":5, "y":1.5}, {"label":"36", "x":6, "y":1.5}, {"label":"41", "x":7, "y":1.5}, {"label":"46", "x":8, "y":1.5}, {"label":"51", "x":9, "y":1.5}, {"label":"57", "x":10, "y":1.5}, {"label":"63", "x":11, "y":1.5}, {"label":"67", "x":12, "y":1.5}, {"label":"71", "x":13, "y":1.5, "w":2}, {"label":"77", "x":15.25, "y":1.5}, {"label":"84", "x":16.25, "y":1.5}, {"label":"83", "x":17.25, "y":1.5}, {"label":"88", "x":18.5, "y":1.5}, {"label":"93", "x":19.5, "y":1.5}, {"label":"97", "x":20.5, "y":1.5}, {"label":"102", "x":21.5, "y":1.5}, {"label":"3", "x":0, "y":2.5, "w":1.5}, {"label":"9", "x":1.5, "y":2.5}, {"label":"15", "x":2.5, "y":2.5}, {"label":"21", "x":3.5, "y":2.5}, {"label":"26", "x":4.5, "y":2.5}, {"label":"31", "x":5.5, "y":2.5}, {"label":"37", "x":6.5, "y":2.5}, {"label":"42", "x":7.5, "y":2.5}, {"label":"47", "x":8.5, "y":2.5}, {"label":"52", "x":9.5, "y":2.5}, {"label":"58", "x":10.5, "y":2.5}, {"label":"64", "x":11.5, "y":2.5}, {"label":"68", "x":12.5, "y":2.5}, {"label":"72", "x":13.5, "y":2.5, "w":1.5}, {"label":"78", "x":15.25, "y":2.5}, {"label":"86", "x":16.25, "y":2.5}, {"label":"85", "x":17.25, "y":2.5}, {"label":"89", "x":18.5, "y":2.5}, {"label":"94", "x":19.5, "y":2.5}, {"label":"98", "x":20.5, "y":2.5}, {"label":"103", "x":21.5, "y":2.5}, {"label":"4", "x":0, "y":3.5, "w":1.75}, {"label":"10", "x":1.75, "y":3.5}, {"label":"16", "x":2.75, "y":3.5}, {"label":"22", "x":3.75, "y":3.5}, {"label":"27", "x":4.75, "y":3.5}, {"label":"32", "x":5.75, "y":3.5}, {"label":"38", "x":6.75, "y":3.5}, {"label":"43", "x":7.75, "y":3.5}, {"label":"48", "x":8.75, "y":3.5}, {"label":"53", "x":9.75, "y":3.5}, {"label":"59", "x":10.75, "y":3.5}, {"label":"65", "x":11.75, "y":3.5}, {"label":"73", "x":12.75, "y":3.5, "w":2.25}, {"label":"90", "x":18.5, "y":3.5}, {"label":"95", "x":19.5, "y":3.5}, {"label":"99", "x":20.5, "y":3.5}, {"label":"110", "x":21.5, "y":3.5}, {"label":"5", "x":0, "y":4.5, "w":2.25}, {"label":"11", "x":2.25, "y":4.5}, {"label":"17", "x":3.25, "y":4.5}, {"label":"23", "x":4.25, "y":4.5}, {"label":"28", "x":5.25, "y":4.5}, {"label":"33", "x":6.25, "y":4.5}, {"label":"39", "x":7.25, "y":4.5}, {"label":"44", "x":8.25, "y":4.5}, {"label":"49", "x":9.25, "y":4.5}, {"label":"54", "x":10.25, "y":4.5}, {"label":"60", "x":11.25, "y":4.5}, {"label":"74", "x":12.25, "y":4.5, "w":2.75}, {"label":"87", "x":16.25, "y":4.5}, {"label":"91", "x":18.5, "y":4.5}, {"label":"96", "x":19.5, "y":4.5}, {"label":"100", "x":20.5, "y":4.5}, {"label":"104", "x":21.5, "y":4.5}, {"label":"6", "x":0, "y":5.5, "w":1.25}, {"label":"12", "x":1.25, "y":5.5, "w":1.25}, {"label":"18", "x":2.5, "y":5.5, "w":1.25}, {"label":"105", "x":3.75, "y":5.5, "w":1.25}, {"label":"106", "x":5, "y":5.5, "w":1.25}, {"label":"34", "x":6.25, "y":5.5, "w":1.25}, {"label":"107", "x":7.5, "y":5.5, "w":1.25}, {"label":"108", "x":8.75, "y":5.5, "w":1.25}, {"label":"55", "x":10, "y":5.5, "w":1.25}, {"label":"61", "x":11.25, "y":5.5, "w":1.25}, {"label":"69", "x":12.5, "y":5.5, "w":1.25}, {"label":"75", "x":13.75, "y":5.5, "w":1.25}, {"label":"79", "x":15.25, "y":5.5}, {"label":"80", "x":16.25, "y":5.5}, {"label":"81", "x":17.25, "y":5.5}, {"label":"92", "x":18.5, "y":5.5}, {"label":"109", "x":19.5, "y":5.5}, {"label":"101", "x":20.5, "y":5.5}, {"label":"111", "x":21.5, "y":5.5}]
+        }
+    }
+}
diff --git a/keyboards/thedogkeyboard/keymaps/default/keymap.c b/keyboards/thedogkeyboard/keymaps/default/keymap.c
new file mode 100644
index 0000000000..7632f81b93
--- /dev/null
+++ b/keyboards/thedogkeyboard/keymaps/default/keymap.c
@@ -0,0 +1,28 @@
+/* Copyright 2019 kakunpc
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_all( /* Base */
+        KC_ESC,   KC_F1,KC_F2,KC_F3,KC_F4,  KC_F5,KC_F6,KC_F7,KC_F8,  KC_F9,KC_F10,KC_F11,KC_F12,  KC_PSCREEN,KC_SCROLLLOCK,KC_PAUSE,
+
+        KC_GRV,KC_1,KC_2,KC_3,KC_4,KC_5,KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINS,KC_EQL,KC_BSPC,        KC_INS, KC_HOME, KC_PGUP,         KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_TAB,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC,KC_BSLS,       KC_DEL,  KC_END, KC_PGDN,           KC_P7,   KC_P8,   KC_P9, KC_PPLS,
+        KC_LCAP, KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT    ,KC_ENT,                                           KC_P4,   KC_P5,   KC_P6,   KC_NO,
+        KC_LSHIFT, KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH,  KC_RSHIFT,                 KC_UP,                    KC_P1,   KC_P2,   KC_P3, KC_PENT,
+        KC_LCTL,KC_LGUI,KC_LALT,KC_NO,KC_NO,KC_SPC,KC_NO,KC_NO,KC_RALT,KC_RGUI,KC_SPC,KC_RCTL,   KC_LEFT,KC_DOWN,KC_RIGHT,           KC_P0,   KC_NO, KC_PDOT,   KC_NO
+    )
+};
diff --git a/keyboards/thedogkeyboard/keymaps/default/readme.md b/keyboards/thedogkeyboard/keymaps/default/readme.md
new file mode 100644
index 0000000000..045729a7a5
--- /dev/null
+++ b/keyboards/thedogkeyboard/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for thedogkeyboard
diff --git a/keyboards/thedogkeyboard/keymaps/kakunpc/keymap.c b/keyboards/thedogkeyboard/keymaps/kakunpc/keymap.c
new file mode 100644
index 0000000000..cc3ba84d87
--- /dev/null
+++ b/keyboards/thedogkeyboard/keymaps/kakunpc/keymap.c
@@ -0,0 +1,43 @@
+/* Copyright 2019 kakunpc
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+enum layers
+{
+  BASE = 0,
+  COMMAND
+};
+
+#define KC_COMMAND LT(COMMAND, KC_F13)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [BASE] = LAYOUT_all( /* BASE */
+        KC_ESC,   KC_F1,KC_F2,KC_F3,KC_F4,  KC_F5,KC_F6,KC_F7,KC_F8,  KC_F9,KC_F10,KC_F11,KC_F12,  KC_PSCREEN,KC_SCROLLLOCK,KC_PAUSE,
+
+        KC_GRV,KC_1,KC_2,KC_3,KC_4,KC_5,KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINS,KC_EQL,KC_BSPC,        KC_INS, KC_HOME, KC_PGUP,         KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_TAB,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC,KC_BSLS,       KC_DEL,  KC_END, KC_PGDN,           KC_P7,   KC_P8,   KC_P9, KC_PPLS,
+        KC_LCTL, KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT    ,KC_ENT,                                           KC_P4,   KC_P5,   KC_P6,   KC_NO,
+        KC_LSHIFT, KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH,  KC_RSHIFT,                 KC_UP,                    KC_P1,   KC_P2,   KC_P3, KC_PENT,
+        KC_LCTL,KC_LGUI,KC_LALT,KC_COMMAND,KC_SPC,KC_SPC,KC_SPC,KC_F14,KC_RALT,KC_NO,KC_NO,KC_COMMAND,   KC_LEFT,KC_DOWN,KC_RIGHT,           KC_P0,   KC_NO, KC_PDOT,   KC_NO ),
+    [COMMAND] = LAYOUT_all( /* COMMAND */
+        KC_ESC,   KC_F1,KC_F2,KC_F3,KC_F4,  KC_F5,KC_F6,KC_F7,KC_F8,  KC_F9,KC_F10,KC_F11,KC_F12,  KC_PSCREEN,KC_SCROLLLOCK,KC_PAUSE,
+
+        KC_GRV,KC_1,KC_2,KC_3,KC_4,KC_5,KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINS,KC_EQL,KC_BSPC,        KC_INS, KC_HOME, KC_PGUP,         KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_TAB,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC,KC_BSLS,       KC_DEL,  KC_END, KC_PGDN,           KC_P7,   KC_P8,   KC_P9, KC_PPLS,
+        KC_LCAP, KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT    ,KC_ENT,                                           KC_P4,   KC_P5,   KC_P6,   KC_NO,
+        KC_LSHIFT, KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH,  KC_RSHIFT,                 KC_UP,                    KC_P1,   KC_P2,   KC_P3, KC_PENT,
+        KC_LCTL,KC_LGUI,KC_LALT,_______,KC_SPC,KC_SPC,KC_SPC,KC_F14,KC_RALT,KC_NO,KC_NO,_______,   KC_LEFT,KC_DOWN,KC_RIGHT,           KC_P0,   KC_NO, KC_PDOT,   KC_NO ),
+};
diff --git a/keyboards/thedogkeyboard/keymaps/kakunpc/readme.md b/keyboards/thedogkeyboard/keymaps/kakunpc/readme.md
new file mode 100644
index 0000000000..66eab07b94
--- /dev/null
+++ b/keyboards/thedogkeyboard/keymaps/kakunpc/readme.md
@@ -0,0 +1 @@
+# The kakunpc keymap for thedogkeyboard
diff --git a/keyboards/thedogkeyboard/matrix.c b/keyboards/thedogkeyboard/matrix.c
new file mode 100644
index 0000000000..e06fc15dc4
--- /dev/null
+++ b/keyboards/thedogkeyboard/matrix.c
@@ -0,0 +1,287 @@
+/*
+Copyright 2012-2018 Jun Wako, Jack Humbert, Yiancar
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <stdint.h>
+#include <stdbool.h>
+#include "wait.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "debounce.h"
+#include "quantum.h"
+
+#if (MATRIX_COLS <= 8)
+#    define print_matrix_header()  print("\nr/c 01234567\n")
+#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop(matrix[i])
+#    define ROW_SHIFTER ((uint8_t)1)
+#elif (MATRIX_COLS <= 16)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse16(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop16(matrix[i])
+#    define ROW_SHIFTER ((uint16_t)1)
+#elif (MATRIX_COLS <= 32)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse32(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop32(matrix[i])
+#    define ROW_SHIFTER  ((uint32_t)1)
+#endif
+
+#ifdef MATRIX_MASKED
+    extern const matrix_row_t matrix_mask[];
+#endif
+
+static const pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static const pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t raw_matrix[MATRIX_ROWS]; //raw values
+static matrix_row_t matrix[MATRIX_ROWS]; //debounced values
+
+__attribute__ ((weak))
+void matrix_init_quantum(void) {
+    matrix_init_kb();
+}
+
+__attribute__ ((weak))
+void matrix_scan_quantum(void) {
+    matrix_scan_kb();
+}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void) {
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void) {
+    return MATRIX_COLS;
+}
+
+//Deprecated.
+bool matrix_is_modified(void)
+{
+    if (debounce_active()) return false;
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    // Matrix mask lets you disable switches in the returned matrix data. For example, if you have a
+    // switch blocker installed and the switch is always pressed.
+#ifdef MATRIX_MASKED
+    return matrix[row] & matrix_mask[row];
+#else
+    return matrix[row];
+#endif
+}
+
+void matrix_print(void)
+{
+    print_matrix_header();
+
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        print_matrix_row(row);
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += matrix_bitpop(i);
+    }
+    return count;
+}
+
+static void select_row(uint8_t row)
+{
+    setPinOutput(row_pins[row]);
+    writePinLow(row_pins[row]);
+}
+
+static void unselect_row(uint8_t row)
+{
+    setPinInputHigh(row_pins[row]);
+}
+
+static void unselect_rows(void)
+{
+    for(uint8_t x = 0; x < MATRIX_ROWS; x++) {
+        setPinInputHigh(row_pins[x]);
+    }
+}
+
+static void select_col(uint8_t col)
+{
+    setPinOutput(col_pins[col]);
+    writePinLow(col_pins[col]);
+}
+
+static void unselect_col(uint8_t col)
+{
+    setPinInputHigh(col_pins[col]);
+}
+
+static void unselect_cols(void)
+{
+    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+        setPinInputHigh(col_pins[x]);
+    }
+}
+
+static void init_pins(void) {
+  unselect_rows();
+  unselect_cols();
+  for (uint8_t x = 0; x < MATRIX_COLS; x++) {
+    setPinInputHigh(col_pins[x]);
+  }
+  for (uint8_t x = 0; x < MATRIX_ROWS; x++) {
+    setPinInputHigh(row_pins[x]);
+  }
+}
+
+static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
+{
+    // Store last value of row prior to reading
+    matrix_row_t last_row_value = current_matrix[current_row];
+
+    // Clear data in matrix row
+    current_matrix[current_row] = 0;
+
+    // Select row and wait for row selecton to stabilize
+    select_row(current_row);
+    wait_us(30);
+
+    // For each col...
+    for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
+
+        // Select the col pin to read (active low)
+        uint8_t pin_state = readPin(col_pins[col_index]);
+
+        // Populate the matrix row with the state of the col pin
+        current_matrix[current_row] |=  pin_state ? 0 : (ROW_SHIFTER << col_index);
+    }
+
+    // Unselect row
+    unselect_row(current_row);
+
+    return (last_row_value != current_matrix[current_row]);
+}
+
+static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
+{
+    bool matrix_changed = false;
+
+    // Select col and wait for col selecton to stabilize
+    select_col(current_col);
+    wait_us(30);
+
+    // For each row...
+    for(uint8_t row_index = 0; row_index < MATRIX_ROWS/2; row_index++)
+    {
+        uint8_t tmp = row_index + MATRIX_ROWS/2;
+        // Store last value of row prior to reading
+        matrix_row_t last_row_value = current_matrix[tmp];
+
+        // Check row pin state
+        if (readPin(row_pins[row_index]) == 0)
+        {
+            // Pin LO, set col bit
+            current_matrix[tmp] |= (ROW_SHIFTER << current_col);
+        }
+        else
+        {
+            // Pin HI, clear col bit
+            current_matrix[tmp] &= ~(ROW_SHIFTER << current_col);
+        }
+
+        // Determine if the matrix changed state
+        if ((last_row_value != current_matrix[tmp]) && !(matrix_changed))
+        {
+            matrix_changed = true;
+        }
+    }
+
+    // Unselect col
+    unselect_col(current_col);
+
+    return matrix_changed;
+}
+
+void matrix_init(void) {
+
+    // initialize key pins
+    init_pins();
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        raw_matrix[i] = 0;
+        matrix[i] = 0;
+    }
+
+    debounce_init(MATRIX_ROWS);
+
+    matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void)
+{
+  bool changed = false;
+
+  // Set row, read cols
+  for (uint8_t current_row = 0; current_row < MATRIX_ROWS / 2; current_row++) {
+    changed |= read_cols_on_row(raw_matrix, current_row);
+  }
+  //else
+  // Set col, read rows
+  for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
+    changed |= read_rows_on_col(raw_matrix, current_col);
+  }
+
+  debounce(raw_matrix, matrix, MATRIX_ROWS, changed);
+
+  matrix_scan_quantum();
+  return (uint8_t)changed;
+}
diff --git a/keyboards/thedogkeyboard/readme.md b/keyboards/thedogkeyboard/readme.md
new file mode 100644
index 0000000000..789149ca82
--- /dev/null
+++ b/keyboards/thedogkeyboard/readme.md
@@ -0,0 +1,15 @@
+# thedogkeyboard
+
+![thedogkeyboard](https://i.gyazo.com/70ac677c1e75c04b812e5dce311f7901.jpg)
+
+ProMicro 100% Keyboard.
+
+* Keyboard Maintainer: [kakunpc](https://github.com/kakunpc)
+* Hardware Supported: thedogkeyboard_rev1, promicro
+* Hardware Availability: booth([@kakunpc](https://kakunpc.booth.pm/))
+
+Make example for this keyboard (after setting up your build environment):
+
+    make thedogkeyboard:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/thedogkeyboard/rules.mk b/keyboards/thedogkeyboard/rules.mk
new file mode 100644
index 0000000000..31e3aa83af
--- /dev/null
+++ b/keyboards/thedogkeyboard/rules.mk
@@ -0,0 +1,35 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
+CUSTOM_MATRIX = yes
+
+SRC += matrix.c
diff --git a/keyboards/thedogkeyboard/thedogkeyboard.c b/keyboards/thedogkeyboard/thedogkeyboard.c
new file mode 100644
index 0000000000..a1808324c8
--- /dev/null
+++ b/keyboards/thedogkeyboard/thedogkeyboard.c
@@ -0,0 +1,16 @@
+/* Copyright 2019 kakunpc
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "thedogkeyboard.h"
diff --git a/keyboards/thedogkeyboard/thedogkeyboard.h b/keyboards/thedogkeyboard/thedogkeyboard.h
new file mode 100644
index 0000000000..3f4b72c2be
--- /dev/null
+++ b/keyboards/thedogkeyboard/thedogkeyboard.h
@@ -0,0 +1,59 @@
+/* Copyright 2019 kakunpc
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_all( \
+    k01,   k07,k13,k19,k24,   k29,k35,k40,k45,   k50,k56,k62,k66,   k70,k76,k82,\
+    \
+    k02,k08,k14,k20,k25,k30,k36,k41,k46,k51,k57,k63,k67,       k71,   k77,k84,k83,   k88,k93,k97,k102,   \
+    k03,   k09,k15,k21,k26,k31,k37,k42,k47,k52,k58,k64,k68,    k72,   k78,k86,k85,   k89,k94,k98,k103,   \
+    k04,    k10,k16,k22,k27,k32,k38,k43,k48,k53,k59,k65,       k73,                  k90,k95,k99,k110,   \
+    k05,     k11,k17,k23,k28,k33,k39,k44,k49,k54,k60,          k74,       k87,       k91,k96,k100,k104,  \
+    k06, k12, k18, k105, k106, k34, k107, k108, k55, k61, k69, k75,   k79,k80,k81,   k92,k109,k101,k111  \
+    \
+) \
+{ \
+    { k01, k02, k03, k04, k05, k06 }, \
+    { k07, k08, k09, k10, k11, k12 }, \
+    { k13, k14, k15, k16, k17, k18 }, \
+    { k19, k20, k21, k22, k23, k105 }, \
+    { k24, k25, k26, k27, k28, k106 }, \
+    { k29, k30, k31, k32, k33, k34 }, \
+    { k35, k36, k37, k38, k39, k107 }, \
+    { k40, k41, k42, k43, k44, k108 }, \
+    { k45, k46, k47, k48, k49, KC_NO }, \
+    { k50, k51, k52, k53, k54, k55 }, \
+    { k56, k57, k58, k59, k60, k61 }, \
+    { k62, k63, k64, k65, KC_NO, KC_NO }, \
+    { k66, k67, k68, k69, KC_NO, KC_NO }, \
+    { k70, k71, k72, k73, k74, k75 }, \
+    { k76, k77, k78, k79, k80, k81 }, \
+    { k82, k83, k84, k85, k86, k87 }, \
+    { k88, k89, k90, k91, k92, KC_NO }, \
+    { k93, k94, k95, k96, k109, KC_NO }, \
+    { k97, k98, k99, k100, k101, KC_NO }, \
+    { k102, k103, k104, k110, k111, KC_NO } \
+}