moved folder, update readme
This commit is contained in:
SethSenpai
parent
c0c0c579ff
commit
468e855207
6 changed files with 1 additions and 1 deletions
|
|
@ -14,7 +14,7 @@ The README.MD for this board is reasonably extensive and in-depth because the bu
|
|||
Since the GameNum is handwired and uses 2 of its pins to toggle indicator lights there are some things to keep in mind.
|
||||
Firmware was build for use with a Pro Micro based on a ATMEGA32u4 at 16mHz.
|
||||
The indicator LED's are normally assigned to `pin C6` and `pin D4`, C6 goes high when the first layer is used, D4 goes high when layer 2 is used. Both LED's are off when the default layer is enabled.
|
||||
+ of the LED goes to the respective pins and can be joined together on the - into a resistor that runs to the ground pin of the pro micro. With a standard LED a resistor value of 100 ohm is fine, keep in mind that you cannot use high powered LEDS on these pins without ruining your pro micro.
|
||||
'+' of the LED goes to the respective pins and can be joined together on the '-' into a resistor that runs to the ground pin of the pro micro. With a standard LED a resistor value of 100 ohm is fine, keep in mind that you cannot use high powered LEDS on these pins without ruining your pro micro.
|
||||
|
||||
Schematic of the build is coming soon.
|
||||
|
||||
Loading…
Reference in a new issue