1
0
Fork 0

Fix up ps2avrgb templates (#5606)

* fix up ps2avrgb templates

* set backlight enable to no as per review comments

* add back no_uart
This commit is contained in:
MechMerlin 2019-05-03 17:26:29 -07:00 committed by Drashna Jaelre
parent b9f060c98c
commit 4c14b5832a
3 changed files with 5 additions and 6 deletions

View file

@ -16,6 +16,8 @@ Flashing
ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.
**Reset Key:** Hold down the key located at `K00`, commonly programmed as `Esc` while plugging in the keyboard.
Windows: Windows:
1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). 1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
2. Place your keyboard into reset. 2. Place your keyboard into reset.

View file

@ -31,13 +31,13 @@ F_CPU = 12000000
BOOTLOADER = bootloadHID BOOTLOADER = bootloadHID
# build options # build options
BOOTMAGIC_ENABLE = full BOOTMAGIC_ENABLE = no
MOUSEKEY_ENABLE = no MOUSEKEY_ENABLE = no
EXTRAKEY_ENABLE = yes EXTRAKEY_ENABLE = yes
CONSOLE_ENABLE = yes CONSOLE_ENABLE = yes
COMMAND_ENABLE = yes COMMAND_ENABLE = yes
BACKLIGHT_ENABLE = no BACKLIGHT_ENABLE = no
RGBLIGHT_ENABLE = no RGBLIGHT_ENABLE = yes
RGBLIGHT_CUSTOM_DRIVER = yes RGBLIGHT_CUSTOM_DRIVER = yes
OPT_DEFS = -DDEBUG_LEVEL=0 OPT_DEFS = -DDEBUG_LEVEL=0

View file

@ -8,8 +8,7 @@
* This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $ * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
*/ */
#ifndef __usbconfig_h_included__ #pragma once
#define __usbconfig_h_included__
#include "config.h" #include "config.h"
@ -392,5 +391,3 @@ section at the end of this file).
/* #define USB_INTR_PENDING EIFR */ /* #define USB_INTR_PENDING EIFR */
#define USB_INTR_PENDING_BIT INTF1 #define USB_INTR_PENDING_BIT INTF1
#define USB_INTR_VECTOR INT1_vect #define USB_INTR_VECTOR INT1_vect
#endif /* __usbconfig_h_included__ */