1
0
Fork 0

Add Comet46 keyboard (#3342)

* Initial commit for Comet46 firmware

* Update Comet46 README

* Add readme to satt keymap of comet46

* Add default keymap for Comet46

* Fix broken link in readme

* Delete redundant includes

* Modify default keymap & fix LAYOUT macro

* Modify satt keymap of Comet46
This commit is contained in:
satt99 2018-07-09 23:46:09 +09:00 committed by Drashna Jaelre
parent dab0b35dc3
commit 56b5e9f23d
13 changed files with 983 additions and 0 deletions

View file

@ -0,0 +1,30 @@
#include "comet46.h"
void uart_init(void) {
SERIAL_UART_INIT();
}
void led_init(void) {
DDRD |= (1<<1);
PORTD |= (1<<1);
DDRF |= (1<<4) | (1<<5);
PORTF |= (1<<4) | (1<<5);
}
void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
matrix_init_user();
uart_init();
led_init();
}
void matrix_scan_kb(void) {
// put your looping keyboard code here
// runs every cycle (a lot)
matrix_scan_user();
}
void led_set_kb(uint8_t usb_led) {
}

View file

@ -0,0 +1,79 @@
#ifndef COMET46_H
#define COMET46_H
#include "quantum.h"
#include "matrix.h"
#include "backlight.h"
#include <stddef.h>
#define red_led_off PORTF |= (1<<5)
#define red_led_on PORTF &= ~(1<<5)
#define blu_led_off PORTF |= (1<<4)
#define blu_led_on PORTF &= ~(1<<4)
#define grn_led_off PORTD |= (1<<1)
#define grn_led_on PORTD &= ~(1<<1)
#define set_led_off red_led_off; grn_led_off; blu_led_off
#define set_led_red red_led_on; grn_led_off; blu_led_off
#define set_led_blue red_led_off; grn_led_off; blu_led_on
#define set_led_green red_led_off; grn_led_on; blu_led_off
#define set_led_yellow red_led_on; grn_led_on; blu_led_off
#define set_led_magenta red_led_on; grn_led_off; blu_led_on
#define set_led_cyan red_led_off; grn_led_on; blu_led_on
#define set_led_white red_led_on; grn_led_on; blu_led_on
/*
#define LED_B 5
#define LED_R 6
#define LED_G 7
#define all_leds_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
#define red_led_on PORTF |= (1<<LED_R)
#define red_led_off PORTF &= ~(1<<LED_R)
#define grn_led_on PORTF |= (1<<LED_G)
#define grn_led_off PORTF &= ~(1<<LED_G)
#define blu_led_on PORTF |= (1<<LED_B)
#define blu_led_off PORTF &= ~(1<<LED_B)
#define set_led_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
#define set_led_red PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_G) | (1<<LED_R)
#define set_led_blue PORTF = PORTF & ~(1<<LED_G) & ~(1<<LED_R) | (1<<LED_B)
#define set_led_green PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_R) | (1<<LED_G)
#define set_led_yellow PORTF = PORTF & ~(1<<LED_B) | (1<<LED_R) | (1<<LED_G)
#define set_led_magenta PORTF = PORTF & ~(1<<LED_G) | (1<<LED_R) | (1<<LED_B)
#define set_led_cyan PORTF = PORTF & ~(1<<LED_R) | (1<<LED_B) | (1<<LED_G)
#define set_led_white PORTF |= (1<<LED_B) | (1<<LED_R) | (1<<LED_G)
*/
// This a shortcut to help you visually see your layout.
// The first section contains all of the arguements
// The second converts the arguments into a two-dimensional array
#define LAYOUT_kc( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11,\
k12, k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25,\
k26, k27, k28, k29, k31, k32, k33, k34, k35, k36, k37, k38, k41, k42,\
k43, k44, k45, k46, k47, k48 \
) \
{ \
{ KC_##k13, KC_##k01, KC_##k26, KC_##k12, KC_##k00, KC_##k11, KC_##k25, KC_##k42, KC_##k10, KC_##k24}, \
{ KC_##k03, KC_##k28, KC_##k14, KC_##k02, KC_##k27, KC_##k41, KC_##k09, KC_##k23, KC_##k38, KC_##k08}, \
{ KC_##k31, KC_##k16, KC_##k04, KC_##k29, KC_##k15, KC_##k22, KC_##k37, KC_##k07, KC_##k21, KC_##k36}, \
{ KC_NO, KC_##k32, KC_##k17, KC_##k05, KC_##k43, KC_##k48, KC_##k06, KC_##k20, KC_##k35, KC_NO }, \
{ KC_NO, KC_##k45, KC_##k33, KC_##k18, KC_##k44, KC_##k47, KC_##k19, KC_##k34, KC_##k46, KC_NO }, \
}
#define LAYOUT( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11,\
k12, k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25,\
k26, k27, k28, k29, k31, k32, k33, k34, k35, k36, k37, k38, k41, k42,\
k43, k44, k45, k46, k47, k48 \
) \
{ \
{ k13, k01, k26, k12, k00, k11, k25, k42, k10, k24}, \
{ k03, k28, k14, k02, k27, k41, k09, k23, k38, k08}, \
{ k31, k16, k04, k29, k15, k22, k37, k07, k21, k36}, \
{ KC_NO, k32, k17, k05, k43, k48, k06, k20, k35, KC_NO }, \
{ KC_NO, k45, k33, k18, k44, k47, k19, k34, k46, KC_NO }, \
}
#endif

View file

@ -0,0 +1,87 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER SatT
#define PRODUCT Comet46
#define DESCRIPTION qmk keyboard firmware for Comet46
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 10
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
//#define BACKLIGHT_LEVELS 3
#define ONESHOT_TIMEOUT 500
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
#define PREVENT_STUCK_MODIFIERS
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
//UART settings for communication with the RF microcontroller
#define SERIAL_UART_BAUD 1000000
#define SERIAL_UART_DATA UDR1
#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1)
#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
#define SERIAL_UART_INIT() do { \
/* baud rate */ \
UBRR1L = SERIAL_UART_UBRR; \
/* baud rate */ \
UBRR1H = SERIAL_UART_UBRR >> 8; \
/* enable TX and RX */ \
UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
/* 8-bit data */ \
UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
} while(0)
#endif

View file

@ -0,0 +1,103 @@
// this is the style you want to emulate.
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
#include QMK_KEYBOARD_H
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
enum comet46_layers
{
_QWERTY,
_LOWER,
_RAISE,
};
enum custom_keycodes {
QWERTY = SAFE_RANGE,
LOWER,
RAISE,
};
// Fillers to make layering more clear
#define _______ KC_TRNS
#define XXXXXXX KC_NO
#define LOWER MO(_LOWER)
#define RAISE MO(_RAISE)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Qwerty
* ,-----------------------------------------+ +-----------------------------------------.
* | Tab | Q | W | E | R | T | | Y | U | I | O | P | Bksp |
* |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------|
* | Ctl | A | S | D | F | G | Esc | | Del | H | J | K | L | ; | " |
* |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------|
* | Shift| Z | X | C | V | B | { | | } | N | M | , | . | / | Shift|
* |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------|
* | GUI | Lower| Space| | Enter| Raise| Alt |
* +--------------------/ \--------------------+
*/
[_QWERTY] = LAYOUT(
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_ESC, KC_DEL, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LCBR, KC_RCBR, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
KC_LGUI, LOWER, KC_SPC, KC_ENT, RAISE, KC_LALT
),
/* Lower
* ,-----------------------------------------+ +-----------------------------------------.
* | | ! | @ | # | $ | % | | ^ | & | * | ( | ) | |
* |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------|
* | | | | | | | | | ` | \ | - | = | [ | ] | |
* |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------|
* | | | | | | | | | ~ | | | _ | + | { | } | |
* |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------|
* | | | | | | | |
* +--------------------/ \--------------------+
*/
[_LOWER] = LAYOUT(
_______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
_______, _______, _______, _______, _______, _______, _______, KC_GRV, KC_BSLS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, _______,
_______, _______, _______, _______, _______, _______, _______, KC_TILD, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, _______,
_______, _______, _______, _______, _______, _______
),
/* Raise
* ,-----------------------------------------+ +-----------------------------------------.
* | | 1 | 2 | 3 | 4 | 5 | | | | | | | |
* |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------|
* | | F1 | F2 | F3 | F4 | F5 | F6 | | | Left | Down | Up |Right | End | |
* |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------|
* | | F7 | F8 | F9 | F10 | F11 | F12 | | Home | | | | | | |
* |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------|
* | | | | | | | |
* +--------------------/ \--------------------+
*/
[_RAISE] = LAYOUT(
_______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______,
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, XXXXXXX, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_END, _______,
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_HOME, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______,
_______, _______, _______, _______, _______, _______
)
};
void matrix_scan_user(void) {
uint8_t layer = biton32(layer_state);
switch (layer) {
case _QWERTY:
set_led_green;
break;
case _RAISE:
set_led_blue;
break;
case _LOWER:
set_led_red;
break;
default:
set_led_green;
break;
}
}

View file

@ -0,0 +1,142 @@
#include "quantum.h"
#include "action_pseudo_lut.h"
static uint8_t send_key_shift_bit[SHIFT_BIT_SIZE];
/*
* Pseudo layout action.
* This action converts a keycode in order to output the character according to the keymap you specified
* still your keyboard layout recognized wrongly on your OS.
* Memo: Using other layer keymap to get keycode
*/
void action_pseudo_lut(keyrecord_t *record, uint8_t base_keymap_id, const uint16_t (*keymap)[2]) {
uint8_t prev_shift;
uint16_t keycode;
uint16_t pseudo_keycode;
/* get keycode from keymap you specified */
keycode = keymap_key_to_keycode(base_keymap_id, record->event.key);
prev_shift = keyboard_report->mods & (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT));
if (record->event.pressed) {
/* when magic commands entered, keycode does not converted */
if (IS_COMMAND()) {
if (prev_shift) {
add_shift_bit(keycode);
}
register_code(keycode);
return;
}
if (prev_shift) {
pseudo_keycode = convert_keycode(keymap, keycode, true);
dprintf("pressed: %02X, converted: %04X\n", keycode, pseudo_keycode);
add_shift_bit(keycode);
if (IS_LSFT(pseudo_keycode)) {
register_code(QK_LSFT ^ pseudo_keycode);
} else {
/* delete shift mod temporarily */
del_mods(prev_shift);
send_keyboard_report();
register_code(pseudo_keycode);
add_mods(prev_shift);
send_keyboard_report();
}
} else {
pseudo_keycode = convert_keycode(keymap, keycode, false);
dprintf("pressed: %02X, converted: %04X\n", keycode, pseudo_keycode);
if (IS_LSFT(pseudo_keycode)) {
add_weak_mods(MOD_BIT(KC_LSFT));
send_keyboard_report();
register_code(QK_LSFT ^ pseudo_keycode);
/* on Windows, prevent key repeat to avoid unintended output */
unregister_code(QK_LSFT ^ pseudo_keycode);
del_weak_mods(MOD_BIT(KC_LSFT));
send_keyboard_report();
} else {
register_code(pseudo_keycode);
}
}
} else {
if (get_shift_bit(keycode)) {
del_shift_bit(keycode);
pseudo_keycode = convert_keycode(keymap, keycode, true);
} else {
pseudo_keycode = convert_keycode(keymap, keycode, false);
}
dprintf("released: %02X, converted: %04X\n", keycode, pseudo_keycode);
if (IS_LSFT(pseudo_keycode)) {
unregister_code(QK_LSFT ^ pseudo_keycode);
} else {
unregister_code(pseudo_keycode);
}
}
}
uint16_t convert_keycode(const uint16_t (*keymap)[2], uint16_t keycode, bool shift_modded)
{
uint16_t pseudo_keycode;
switch (keycode) {
case KC_A ... KC_CAPSLOCK:
#if defined(__AVR__)
if (shift_modded) {
pseudo_keycode = pgm_read_word(&keymap[keycode][1]);
} else {
pseudo_keycode = pgm_read_word(&keymap[keycode][0]);
}
#else
if (shift_modded) {
pseudo_keycode = keymap[keycode][1];
} else {
pseudo_keycode = keymap[keycode][0];
}
#endif
/* if undefined, use got keycode as it is */
if (pseudo_keycode == 0x00) {
if (shift_modded) {
pseudo_keycode = S(keycode);
} else {
pseudo_keycode = keycode;
}
}
break;
default:
if (shift_modded) {
pseudo_keycode = S(keycode);
} else {
pseudo_keycode = keycode;
}
break;
}
return pseudo_keycode;
}
uint8_t get_shift_bit(uint16_t keycode) {
if ((keycode >> 3) < SHIFT_BIT_SIZE) {
return send_key_shift_bit[keycode >> 3] & (1 << (keycode & 7));
} else {
dprintf("get_shift_bit: Can't get shift bit. keycode: %02X\n", keycode);
return 0;
}
}
void add_shift_bit(uint16_t keycode) {
if ((keycode >> 3) < SHIFT_BIT_SIZE) {
send_key_shift_bit[keycode >> 3] |= (1 << (keycode & 7));
} else {
dprintf("add_shift_bit: Can't add shift bit. keycode: %02X\n", keycode);
}
}
void del_shift_bit(uint16_t keycode) {
if ((keycode >> 3) < SHIFT_BIT_SIZE) {
send_key_shift_bit[keycode >> 3] &= ~(1 << (keycode & 7));
} else {
dprintf("del_shift_bit: Can't delete shift bit. keycode: %02X\n", keycode);
}
}

View file

@ -0,0 +1,15 @@
#ifndef ACTION_PSEUDO_LUT_H
#define ACTION_PSEUDO_LUT_H
#define SHIFT_BIT_SIZE (0xE7 / 8 + 1) // 1bit per 1key
#define IS_LSFT(kc) ((QK_LSFT & (kc)) == QK_LSFT)
void action_pseudo_lut(keyrecord_t *, uint8_t, const uint16_t (*)[2]);
uint16_t convert_keycode(const uint16_t (*)[2], uint16_t, bool);
uint8_t get_shift_bit(uint16_t);
void add_shift_bit(uint16_t);
void del_shift_bit(uint16_t);
#endif

View file

@ -0,0 +1,220 @@
// this is the style you want to emulate.
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
#include QMK_KEYBOARD_H
#include "keymap_jis2us.h"
#include "action_pseudo_lut.h"
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
enum comet46_layers {
_QWERTY,
_LOWER,
_RAISE,
_PSEUDO_US,
_PSEUDO_US_LOWER,
_PSEUDO_US_RAISE,
_ADJUST
};
enum custom_keycodes {
QWERTY = SAFE_RANGE,
PSEUDO_US,
};
#define KC_LWR MO(_LOWER)
#define KC_RSE MO(_RAISE)
#define KC_P_LW MO(_PSEUDO_US_LOWER)
#define KC_P_RS MO(_PSEUDO_US_RAISE)
#define KC_QWRT QWERTY
#define KC_P_US PSEUDO_US
#define KC_SPCT CTL_T(KC_SPC)
#define KC_ENSF SFT_T(KC_ENT)
#define KC_SFTA SFT_T(KC_A)
#define KC_CTSF S(KC_LCTL)
#define KC_IMON ALT_T(KC_F13)
#define KC_IMOF GUI_T(KC_F14)
#define KC_SRO S(KC_RO)
#define KC_SYEN S(KC_JYEN)
#define KC_CAD LCA(KC_DEL)
#define KC_RST RESET
#define LONGPRESS_DELAY 150
// Fillers to make layering more clear
#define KC_ KC_TRNS
#define KC_XXXX KC_NO
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT_kc(
//,----+----+----+----+----+----+ +----+----+----+----+----+----.
ESC , Q , W , E , R , T , Y , U , I , O , P ,DEL ,
//|----+----+----+----+----+----+----+ +----+----+----+----+----+----+----|
TAB ,SFTA, S , D , F , G ,LPRN, RPRN, H , J , K , L ,SCLN,BSPC,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
CTSF, Z , X , C , V , B ,LBRC, RBRC, N , M ,COMM,DOT ,SLSH,QUOT,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
IMOF,LWR ,SPCT, ENSF,RSE ,IMON
// +----+----+---/ \---+----+----+
),
[_LOWER] = LAYOUT_kc(
//,----+----+----+----+----+----+ +----+----+----+----+----+----.
,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN, ,
//|----+----+----+----+----+----+----+ +----+----+----+----+----+----+----|
, F1 , F2 , F3 , F4 , F5 , F6 , GRV ,BSLS,MINS,EQL ,LBRC,RBRC, ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, F7 , F8 , F9 , F10, F11, F12, TILD,PIPE,UNDS,PLUS,LCBR,RCBR, ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , , , ,
// +----+----+---/ \---+----+----+
),
[_RAISE] = LAYOUT_kc(
//,----+----+----+----+----+----+ +----+----+----+----+----+----.
, 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , ,
//|----+----+----+----+----+----+----+ +----+----+----+----+----+----+----|
, , , , , , , XXXX,LEFT,DOWN, UP ,RGHT,END , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , , , , , , HOME,XXXX,XXXX,XXXX,XXXX,XXXX, ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , , , ,
// +----+----+---/ \---+----+----+
),
[_PSEUDO_US] = LAYOUT_kc(
//,----+----+----+----+----+----+ +----+----+----+----+----+----.
ESC , Q , W , E , R , T , Y , U , I , O , P ,DEL ,
//|----+----+----+----+----+----+----+ +----+----+----+----+----+----+----|
TAB ,SFTA, S , D , F , G ,ASTR, LPRN, H , J , K , L ,FN0 ,BSPC,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
CTSF, Z , X , C , V , B ,FN0 , FN0 , N , M ,COMM,DOT ,SLSH,FN0 ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
IMOF,P_LW,SPCT, ENSF,P_RS,IMON
// +----+----+---/ \---+----+----+
),
[_PSEUDO_US_LOWER] = LAYOUT_kc(
//,----+----+----+----+----+----+ +----+----+----+----+----+----.
,EXLM,LBRC,HASH,DLR ,PERC, EQL ,CIRC, DQT,ASTR,LPRN, ,
//|----+----+----+----+----+----+----+ +----+----+----+----+----+----+----|
, F1 , F2 , F3 , F4 , F5 , F6 , LCBR,JYEN,MINS,UNDS,RBRC,BSLS, ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, F7 , F8 , F9 , F10, F11, F12, PLUS,SYEN,SRO ,COLN,RCBR,PIPE, ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , , , ,
// +----+----+---/ \---+----+----+
),
[_PSEUDO_US_RAISE] = LAYOUT_kc(
//,----+----+----+----+----+----+ +----+----+----+----+----+----.
, 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , ,
//|----+----+----+----+----+----+----+ +----+----+----+----+----+----+----|
, , , , , , GRV, XXXX,LEFT,DOWN, UP ,RGHT,END , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , , , , , , HOME,XXXX,XXXX,XXXX,XXXX,XXXX, ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , , , ,
// +----+----+---/ \---+----+----+
),
[_ADJUST] = LAYOUT_kc(
//,----+----+----+----+----+----+ +----+----+----+----+----+----.
, , , , , , , , , , , ,
//|----+----+----+----+----+----+----+ +----+----+----+----+----+----+----|
, , , , , ,CAD , QWRT, , , , , , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , , , , ,RST , P_US, , , , , , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , , , ,
// +----+----+---/ \---+----+----+
)
};
/*
* user defined action function
*/
enum function_id {
PSEUDO_US_FUNCTION,
};
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
switch (id)
{
case PSEUDO_US_FUNCTION:
action_pseudo_lut(record, _QWERTY, keymap_jis2us);
break;
}
}
/*
* Fn action definition
*/
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_FUNCTION(PSEUDO_US_FUNCTION),
};
void matrix_scan_user(void) {
uint8_t layer = biton32(layer_state);
switch (layer) {
case _LOWER:
set_led_red;
break;
case _RAISE:
set_led_blue;
break;
case _PSEUDO_US_LOWER:
set_led_yellow;
break;
case _PSEUDO_US_RAISE:
set_led_cyan;
break;
case _ADJUST:
set_led_magenta;
break;
default:
set_led_green;
break;
}
};
uint32_t layer_state_set_user(uint32_t state) {
switch (biton32(state)) {
case _PSEUDO_US:
return update_tri_layer_state(state, _PSEUDO_US_RAISE, _PSEUDO_US_LOWER, _ADJUST);
break;
case _PSEUDO_US_LOWER:
return update_tri_layer_state(state, _PSEUDO_US_RAISE, _PSEUDO_US_LOWER, _ADJUST);
break;
case _PSEUDO_US_RAISE:
return update_tri_layer_state(state, _PSEUDO_US_RAISE, _PSEUDO_US_LOWER, _ADJUST);
break;
default:
return update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST);
break;
}
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
set_single_persistent_default_layer(_QWERTY);
}
return false;
break;
case PSEUDO_US:
if (record->event.pressed) {
set_single_persistent_default_layer(_PSEUDO_US);
}
return false;
break;
}
return true;
}

View file

@ -0,0 +1,32 @@
#ifndef KEYMAP_JIS2US_H
#define KEYMAP_JIS2US_H
/* keymap for convert from JIS to US */
const uint16_t PROGMEM keymap_jis2us[][2] = {
[KC_A ... KC_CAPS] = { 0x00, 0x00 }, /* default value */
[KC_1] = { KC_1, KC_EXLM }, /* 1 and ! -> 1 and ! */
[KC_2] = { KC_2, KC_LBRC }, /* 2 and " -> 2 and @ */
[KC_3] = { KC_3, KC_HASH }, /* 3 and # -> 3 and # */
[KC_4] = { KC_4, KC_DLR }, /* 4 and $ -> 4 and $ */
[KC_5] = { KC_5, KC_PERC }, /* 5 and % -> 5 and % */
[KC_6] = { KC_6, KC_EQL }, /* 6 and & -> 6 and ^ */
[KC_7] = { KC_7, KC_CIRC }, /* 7 and ' -> 7 and & */
[KC_8] = { KC_8, KC_DQT }, /* 8 and ( -> 8 and * */
[KC_9] = { KC_9, KC_ASTR }, /* 9 and ) -> 9 and ( */
[KC_0] = { KC_0, KC_LPRN }, /* 0 and (no assign) -> 0 and ) */
[KC_MINS] = { KC_MINS, S(KC_RO) }, /* - and = -> - and _ */
[KC_EQL] = { KC_UNDS, KC_COLN }, /* ^ and ~ -> = and + */
[KC_LBRC] = { KC_RBRC, KC_RCBR }, /* @ and ` -> [ and { */
[KC_RBRC] = { KC_BSLS, KC_PIPE }, /* [ and { -> ] and } */
[KC_BSLS] = { KC_JYEN, S(KC_JYEN) }, /* ] and } -> / and | */
[KC_NUHS] = { KC_NUHS, S(KC_NUHS) }, /* (no assign) */
[KC_SCLN] = { KC_SCLN, KC_QUOT }, /* ; and + -> ; and : */
[KC_QUOT] = { KC_AMPR, KC_AT }, /* : and * -> ' and " */
[KC_GRV] = { KC_LCBR, KC_PLUS }, /* (no assign) -> ` and ~ */
[KC_COMM] = { KC_COMM, KC_LT }, /* , and < -> , and < */
[KC_DOT] = { KC_DOT, KC_GT }, /* . and > -> . and > */
[KC_SLSH] = { KC_SLSH, KC_QUES }, /* / and ? -> / and ? */
};
#endif

View file

@ -0,0 +1,6 @@
## Pseudo US Layout
On a Japanese Windows environment, ANSI keyboards may be recognized wrongly as a JIS keyboard.
By using this code, you can use your ANSI keyboard under a JIS keyboard environment without changing the settings and registry of your environment.
Original code by [Shela](https://github.com/qmk/qmk_firmware/tree/master/keyboards/hhkb/keymaps/shela)

View file

@ -0,0 +1,26 @@
SRC += action_pseudo_lut.c
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = no # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
ONEHAND_ENABLE = no # Enable one-hand typing
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

154
keyboards/comet46/matrix.c Normal file
View file

@ -0,0 +1,154 @@
/*
Copyright 2012 Jun Wako
Copyright 2014 Jack Humbert
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include <stdbool.h>
#if defined(__AVR__)
#include <avr/io.h>
#endif
#include "wait.h"
#include "print.h"
#include "debug.h"
#include "util.h"
#include "matrix.h"
#include "timer.h"
#if (MATRIX_COLS <= 8)
# define print_matrix_header() print("\nr/c 01234567\n")
# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
# define matrix_bitpop(i) bitpop(matrix[i])
# define ROW_SHIFTER ((uint8_t)1)
#elif (MATRIX_COLS <= 16)
# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n")
# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row))
# define matrix_bitpop(i) bitpop16(matrix[i])
# define ROW_SHIFTER ((uint16_t)1)
#elif (MATRIX_COLS <= 32)
# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row))
# define matrix_bitpop(i) bitpop32(matrix[i])
# define ROW_SHIFTER ((uint32_t)1)
#endif
/* matrix state(1:on, 0:off) */
static matrix_row_t matrix[MATRIX_ROWS];
__attribute__ ((weak))
void matrix_init_kb(void) {
matrix_init_user();
}
__attribute__ ((weak))
void matrix_scan_kb(void) {
matrix_scan_user();
}
__attribute__ ((weak))
void matrix_init_user(void) {
}
__attribute__ ((weak))
void matrix_scan_user(void) {
}
inline
uint8_t matrix_rows(void) {
return MATRIX_ROWS;
}
inline
uint8_t matrix_cols(void) {
return MATRIX_COLS;
}
void matrix_init(void) {
matrix_init_quantum();
}
uint8_t matrix_scan(void)
{
SERIAL_UART_INIT();
uint32_t timeout = 0;
//the s character requests the RF slave to send the matrix
SERIAL_UART_DATA = 's';
//trust the external keystates entirely, erase the last data
uint8_t uart_data[11] = {0};
//there are 10 bytes corresponding to 10 columns, and an end byte
for (uint8_t i = 0; i < 11; i++) {
//wait for the serial data, timeout if it's been too long
//this only happened in testing with a loose wire, but does no
//harm to leave it in here
while(!SERIAL_UART_RXD_PRESENT){
timeout++;
if (timeout > 10000){
break;
}
}
uart_data[i] = SERIAL_UART_DATA;
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
//will only show up here if the correct bytes were recieved
if (uart_data[10] == 0xE0)
{
//shifting and transferring the keystates to the QMK matrix variable
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 5;
}
}
matrix_scan_quantum();
return 1;
}
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
return (matrix[row] & ((matrix_row_t)1<col));
}
inline
matrix_row_t matrix_get_row(uint8_t row)
{
return matrix[row];
}
void matrix_print(void)
{
print_matrix_header();
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
phex(row); print(": ");
print_matrix_row(row);
print("\n");
}
}
uint8_t matrix_key_count(void)
{
uint8_t count = 0;
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
count += matrix_bitpop(i);
}
return count;
}

View file

@ -0,0 +1,16 @@
# Comet46
![Comet46](https://user-images.githubusercontent.com/39004890/42418180-d5bb188c-82d5-11e8-99fa-65020ce5ac5d.jpg)
A split wireless 40% column-staggered keyboard
Keyboard Maintainer: [SatT](https://github.com/satt99)
Hardware Supported: Comet46 PCB, atmega32u4, nRF51822
Hardware Availability: [Comet46 PCB, case, and receiver](https://github.com/satt99/comet46-hardware)
Firmware for nordic MCUs: [SRC and precompiled](https://github.com/satt99/comet46-firmware)
Make example for this keyboard (after setting up your build environment):
make comet46:default
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

View file

@ -0,0 +1,73 @@
OPT_DEFS += -DCOMET46_ORTHO_===PROMICRO
COMET46_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
# # project specific files
SRC = matrix.c
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = caterina
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = no # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
# MIDI_ENABLE = YES # MIDI controls
UNICODE_ENABLE = YES # Unicode
# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
USB = /dev/ttyACM0