diff --git a/keyboards/hub20/chconf.h b/keyboards/hub20/chconf.h
new file mode 100644
index 0000000000..03f63da36a
--- /dev/null
+++ b/keyboards/hub20/chconf.h
@@ -0,0 +1,714 @@
+/*
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file rt/templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+#define _CHIBIOS_RT_CONF_VER_6_0_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_ST_RESOLUTION)
+#define CH_CFG_ST_RESOLUTION 32
+#endif
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#if !defined(CH_CFG_ST_FREQUENCY)
+#define CH_CFG_ST_FREQUENCY 10000
+#endif
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE 32
+#endif
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE 32
+#endif
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#if !defined(CH_CFG_ST_TIMEDELTA)
+#define CH_CFG_ST_TIMEDELTA 2
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
+ */
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM 0
+#endif
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+#if !defined(CH_CFG_MEMCORE_SIZE)
+#define CH_CFG_MEMCORE_SIZE 0
+#endif
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
+ */
+#if !defined(CH_CFG_NO_IDLE_THREAD)
+#define CH_CFG_NO_IDLE_THREAD FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
+#define CH_CFG_OPTIMIZE_SPEED FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_TM)
+#define CH_CFG_USE_TM FALSE
+#endif
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_REGISTRY)
+#define CH_CFG_USE_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_WAITEXIT)
+#define CH_CFG_USE_WAITEXIT TRUE
+#endif
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES)
+#define CH_CFG_USE_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+#endif
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MUTEXES)
+#define CH_CFG_USE_MUTEXES TRUE
+#endif
+
+/**
+ * @brief Enables recursive behavior on mutexes.
+ * @note Recursive mutexes are heavier and have an increased
+ * memory footprint.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
+#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+#endif
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_CONDVARS)
+#define CH_CFG_USE_CONDVARS TRUE
+#endif
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
+ */
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
+#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE
+#endif
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_EVENTS)
+#define CH_CFG_USE_EVENTS TRUE
+#endif
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_EVENTS.
+ */
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+#endif
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MESSAGES)
+#define CH_CFG_USE_MESSAGES TRUE
+#endif
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
+ */
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
+#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+#endif
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_MAILBOXES)
+#define CH_CFG_USE_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMCORE)
+#define CH_CFG_USE_MEMCORE TRUE
+#endif
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#if !defined(CH_CFG_USE_HEAP)
+#define CH_CFG_USE_HEAP FALSE
+#endif
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMPOOLS)
+#define CH_CFG_USE_MEMPOOLS FALSE
+#endif
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS FALSE
+#endif
+
+/**
+ * @brief Pipes APIs.
+ * @details If enabled then the pipes APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_PIPES)
+#define CH_CFG_USE_PIPES FALSE
+#endif
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#if !defined(CH_CFG_USE_DYNAMIC)
+#define CH_CFG_USE_DYNAMIC FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY FALSE
+#endif
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+#endif
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE
+#endif
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE
+#endif
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES FALSE
+#endif
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES FALSE
+#endif
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS FALSE
+#endif
+
+/**
+ * @brief Enables factory for Pipes.
+ */
+#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
+#define CH_CFG_FACTORY_PIPES FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_STATISTICS)
+#define CH_DBG_STATISTICS FALSE
+#endif
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
+#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+#endif
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_CHECKS)
+#define CH_DBG_ENABLE_CHECKS FALSE
+#endif
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_ASSERTS)
+#define CH_DBG_ENABLE_ASSERTS FALSE
+#endif
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
+#endif
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+#endif
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
+#define CH_DBG_ENABLE_STACK_CHECK FALSE
+#endif
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_FILL_THREADS)
+#define CH_DBG_FILL_THREADS FALSE
+#endif
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
+ */
+#if !defined(CH_DBG_THREADS_PROFILING)
+#define CH_DBG_THREADS_PROFILING FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p _thread_init() function.
+ *
+ * @note It is invoked from within @p _thread_init() and implicitly from all
+ * the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* Context switch code here.*/ \
+}
+
+/**
+ * @brief ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
+ /* IRQ prologue code here.*/ \
+}
+
+/**
+ * @brief ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
+ /* IRQ epilogue code here.*/ \
+}
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
+}
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() { \
+ /* System tick event code here.*/ \
+}
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
+ /* System halt code here.*/ \
+}
+
+/**
+ * @brief Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ * trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) { \
+ /* Trace code here.*/ \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* CHCONF_H */
+
+/** @} */
diff --git a/keyboards/hub20/config.h b/keyboards/hub20/config.h
new file mode 100644
index 0000000000..8ebe1f9e2b
--- /dev/null
+++ b/keyboards/hub20/config.h
@@ -0,0 +1,86 @@
+/*
+Copyright 2020 joshajohnson
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see .
+*/
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x6A6A // JJ
+#define PRODUCT_ID 0x4414 // H20
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Josh Johnson
+#define PRODUCT Hub20
+
+/* key matrix */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 4
+
+#define MATRIX_ROW_PINS { A13, B14, A10, A0, A2, A1 }
+#define MATRIX_COL_PINS { A6, A7, B7, B6 }
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/* Rotary Encoder Things */
+// #define ENCODER_DIRECTION_FLIP
+#define ENCODERS_PAD_A { B12, A8 }
+#define ENCODERS_PAD_B { B13, A9 }
+
+#define RGB_DI_PIN B15
+#define RGBLED_NUM 27
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+#define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+// #define RGBLIGHT_EFFECT_BREATHING
+// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+// #define RGBLIGHT_EFFECT_SNAKE
+// #define RGBLIGHT_EFFECT_KNIGHT
+// #define RGBLIGHT_EFFECT_CHRISTMAS
+// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+// #define RGBLIGHT_EFFECT_RGB_TEST
+// #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
+// /*==== use exp() and sin() ====*/
+// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
+// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Tap delay for tap vs hold */
+#define TAPPING_TERM 200
+
+/* Slow down key press speed to ensure computer picks it up */
+#define TAP_CODE_DELAY 10
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* disable these deprecated features by default */
+#ifndef LINK_TIME_OPTIMIZATION_ENABLE
+ #define NO_ACTION_MACRO
+ #define NO_ACTION_FUNCTION
+#endif
diff --git a/keyboards/hub20/halconf.h b/keyboards/hub20/halconf.h
new file mode 100644
index 0000000000..adb1a90715
--- /dev/null
+++ b/keyboards/hub20/halconf.h
@@ -0,0 +1,525 @@
+/*
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/halconf.h
+ * @brief HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ * various device drivers from your application. You may also use
+ * this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef HALCONF_H
+#define HALCONF_H
+
+#define _CHIBIOS_HAL_CONF_
+#define _CHIBIOS_HAL_CONF_VER_7_0_
+
+#include "mcuconf.h"
+
+/**
+ * @brief Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL TRUE
+#endif
+
+/**
+ * @brief Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC FALSE
+#endif
+
+/**
+ * @brief Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN FALSE
+#endif
+
+/**
+ * @brief Enables the cryptographic subsystem.
+ */
+#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
+#define HAL_USE_CRY FALSE
+#endif
+
+/**
+ * @brief Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC FALSE
+#endif
+
+/**
+ * @brief Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT FALSE
+#endif
+
+/**
+ * @brief Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C TRUE
+#endif
+
+/**
+ * @brief Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S FALSE
+#endif
+
+/**
+ * @brief Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU FALSE
+#endif
+
+/**
+ * @brief Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC FALSE
+#endif
+
+/**
+ * @brief Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM TRUE
+#endif
+
+/**
+ * @brief Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC FALSE
+#endif
+
+/**
+ * @brief Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB FALSE
+#endif
+
+/**
+ * @brief Enables the SIO subsystem.
+ */
+#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
+#define HAL_USE_SIO FALSE
+#endif
+
+/**
+ * @brief Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI TRUE
+#endif
+
+/**
+ * @brief Enables the TRNG subsystem.
+ */
+#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
+#define HAL_USE_TRNG FALSE
+#endif
+
+/**
+ * @brief Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART FALSE
+#endif
+
+/**
+ * @brief Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB TRUE
+#endif
+
+/**
+ * @brief Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG FALSE
+#endif
+
+/**
+ * @brief Enables the WSPI subsystem.
+ */
+#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
+#define HAL_USE_WSPI FALSE
+#endif
+
+/*===========================================================================*/
+/* PAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define PAL_USE_CALLBACKS FALSE
+#endif
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
+#define PAL_USE_WAIT FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE TRUE
+#endif
+
+/**
+ * @brief Enforces the driver to use direct callbacks rather than OSAL events.
+ */
+#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define CAN_ENFORCE_USE_CALLBACKS FALSE
+#endif
+
+/*===========================================================================*/
+/* CRY driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the SW fall-back of the cryptographic driver.
+ * @details When enabled, this option, activates a fall-back software
+ * implementation for algorithms not supported by the underlying
+ * hardware.
+ * @note Fall-back implementations may not be present for all algorithms.
+ */
+#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_USE_FALLBACK FALSE
+#endif
+
+/**
+ * @brief Makes the driver forcibly use the fall-back implementations.
+ */
+#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_ENFORCE_FALLBACK FALSE
+#endif
+
+/*===========================================================================*/
+/* DAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
+#define DAC_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define DAC_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the zero-copy API.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY FALSE
+#endif
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ * This option is recommended also if the SPI driver does not
+ * use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Number of initialization attempts before rejecting the card.
+ * @note Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY 100
+#endif
+
+/**
+ * @brief Include support for MMC cards.
+ * @note MMC support is not yet implemented so this option must be kept
+ * at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT FALSE
+#endif
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING TRUE
+#endif
+
+/**
+ * @brief OCR initialization constant for V20 cards.
+ */
+#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
+#define SDC_INIT_OCR_V20 0x50FF8000U
+#endif
+
+/**
+ * @brief OCR initialization constant for non-V20 cards.
+ */
+#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
+#define SDC_INIT_OCR 0x80100000U
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ * default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE 38400
+#endif
+
+/**
+ * @brief Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ * buffers depending on the requirements of your application.
+ * @note The default is 16 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE 16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting. */
+/*===========================================================================*/
+
+/**
+ * @brief Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ * the USB data endpoint maximum packet size.
+ * @note The default is 256 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE 1
+#endif
+
+/**
+ * @brief Serial over USB number of buffers.
+ * @note The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER 2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables circular transfers APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
+#define SPI_USE_CIRCULAR FALSE
+#endif
+
+
+/**
+ * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/**
+ * @brief Handling method for SPI CS line.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
+#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT FALSE
+#endif
+
+/**
+ * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT TRUE
+#endif
+
+/*===========================================================================*/
+/* WSPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
+#define WSPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define WSPI_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+#endif /* HALCONF_H */
+
+/** @} */
diff --git a/keyboards/hub20/hub20.c b/keyboards/hub20/hub20.c
new file mode 100644
index 0000000000..306ab788d9
--- /dev/null
+++ b/keyboards/hub20/hub20.c
@@ -0,0 +1,18 @@
+/* Copyright 2020 joshajohnson
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#include "hub20.h"
+
diff --git a/keyboards/hub20/hub20.h b/keyboards/hub20/hub20.h
new file mode 100644
index 0000000000..b4b1c79924
--- /dev/null
+++ b/keyboards/hub20/hub20.h
@@ -0,0 +1,47 @@
+/* Copyright 2020 joshajohnson
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define ___ KC_NO
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+
+#define LAYOUT_all( \
+ K01, K02, \
+ K10, K11, K12, K13, \
+ K20, K21, K22, K23, \
+ K30, K31, K32, K33, \
+ K40, K41, K42, K43, \
+ K50, K51, K52, K53 \
+) \
+{ \
+ { ___, K01, K02, ___, }, \
+ { K10, K11, K12, K13, }, \
+ { K20, K21, K22, K23, }, \
+ { K30, K31, K32, K33, }, \
+ { K40, K41, K42, K43, }, \
+ { K50, K51, K52, K53, }, \
+}
diff --git a/keyboards/hub20/info.json b/keyboards/hub20/info.json
new file mode 100644
index 0000000000..9e0a7edf28
--- /dev/null
+++ b/keyboards/hub20/info.json
@@ -0,0 +1,36 @@
+{
+ "keyboard_name": "Hub20",
+ "keyboard_folder": "hub20",
+ "url": "https://github.com/joshajohnson/hub20",
+ "maintainer": "joshajohnson",
+ "width": 4,
+ "height": 6,
+ "layouts": {
+ "LAYOUT_all": {
+ "layout": [
+ {"label":"Mute", "x":0.5, "y":0},
+ {"label":"Play / Pause", "x":2.5, "y":0},
+ {"label":"-", "x":0, "y":1},
+ {"label":"*", "x":1, "y":1},
+ {"label":"/", "x":2, "y":1},
+ {"label":"Numlock", "x":3, "y":1},
+ {"label":"+", "x":0, "y":2},
+ {"label":"7", "x":1, "y":2},
+ {"label":"8", "x":2, "y":2},
+ {"label":"9", "x":3, "y":2},
+ {"label":"+", "x":0, "y":3},
+ {"label":"4", "x":1, "y":3},
+ {"label":"5", "x":2, "y":3},
+ {"label":"6", "x":3, "y":3},
+ {"label":"Enter", "x":0, "y":4},
+ {"label":"1", "x":1, "y":4},
+ {"label":"2", "x":2, "y":4},
+ {"label":"3", "x":3, "y":4},
+ {"label":"Enter", "x":0, "y":5},
+ {"label":".", "x":1, "y":5},
+ {"label":"0", "x":2, "y":5},
+ {"label":"0", "x":3, "y":5}
+ ]
+ }
+ }
+}
diff --git a/keyboards/hub20/keymaps/default/keymap.c b/keyboards/hub20/keymaps/default/keymap.c
new file mode 100644
index 0000000000..c467312877
--- /dev/null
+++ b/keyboards/hub20/keymaps/default/keymap.c
@@ -0,0 +1,53 @@
+/* Copyright 2020 joshajohnson
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+#include QMK_KEYBOARD_H
+
+#define MO_NLCK LT(1, KC_NLCK) // Numlock on tap, layer change on hold
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT_all(
+ KC_MUTE, KC_MPLY,
+ KC_PMNS, KC_PAST, KC_PSLS, MO_NLCK,
+ KC_PPLS, KC_P7, KC_P8, KC_P9,
+ KC_PPLS, KC_P4, KC_P5, KC_P6,
+ KC_PENT, KC_P1, KC_P2, KC_P3,
+ KC_PENT, KC_PDOT, KC_P0, KC_P0
+),
+ [1] = LAYOUT_all(
+ RESET, _______,
+ RGB_TOG, RGB_RMOD, RGB_MOD, _______,
+ _______, RGB_VAD, RGB_VAI, _______,
+ _______, RGB_HUD, RGB_HUI, _______,
+ _______, RGB_SAD, RGB_SAI, _______,
+ _______, _______, _______, _______
+)
+};
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+ if (index == 0) { /* Left Encoder */
+ if (clockwise) {
+ tap_code(KC_VOLU);
+ } else {
+ tap_code(KC_VOLD);
+ }
+ } else if (index == 1) { /* Right Encoder */
+ if (clockwise) {
+ tap_code(KC_MNXT);
+ } else {
+ tap_code(KC_MPRV);
+ }
+ }
+}
diff --git a/keyboards/hub20/keymaps/macro/keymap.c b/keyboards/hub20/keymaps/macro/keymap.c
new file mode 100644
index 0000000000..7007a2f0ba
--- /dev/null
+++ b/keyboards/hub20/keymaps/macro/keymap.c
@@ -0,0 +1,120 @@
+/* Copyright 2020 joshajohnson
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+#include QMK_KEYBOARD_H
+
+// Function key we are 'wrapping' usual key presses in
+#define KC_WRAP KC_F23
+
+// Keyboard Layers
+enum keyboard_layers{
+ _BASE = 0,
+ _CTRL
+};
+
+// Tap Dance stuff
+void td_ctrl (qk_tap_dance_state_t *state, void *user_data);
+
+enum tap_dance {
+ CTRL = 0,
+ BASE = 1
+};
+
+qk_tap_dance_action_t tap_dance_actions[] = {
+ // Tap once for standard key, twice to toggle layers
+ [CTRL] = ACTION_TAP_DANCE_FN(td_ctrl),
+ [BASE] = ACTION_TAP_DANCE_LAYER_MOVE(_______, _BASE)
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [_BASE] = LAYOUT_all(
+ KC_W, KC_Z,
+ KC_A, KC_B, KC_C, TD(CTRL),
+ KC_E, KC_F, KC_G, KC_H,
+ KC_I, KC_J, KC_K, KC_L,
+ KC_M, KC_N, KC_O, KC_P,
+ KC_Q, KC_R, KC_S, KC_T
+),
+ [_CTRL] = LAYOUT_all(
+ RESET, _______,
+ RGB_TOG, RGB_RMOD, RGB_MOD, TD(BASE),
+ _______, RGB_VAD, RGB_VAI, _______,
+ _______, RGB_HUD, RGB_HUI, _______,
+ _______, RGB_SAD, RGB_SAI, _______,
+ _______, _______, _______, _______
+)
+};
+
+// Keyboard is setup to 'wrap' the pressed key with an unused Fxx key,
+// allowing for easy differentiation from a real keyboard.
+void encoder_update_user(uint8_t index, bool clockwise) {
+ if (index == 0) { /* Left Encoder */
+ if (clockwise) {
+ register_code(KC_WRAP);
+ tap_code(KC_U);
+ unregister_code(KC_WRAP);
+ } else {
+ register_code(KC_WRAP);
+ tap_code(KC_V);
+ unregister_code(KC_WRAP);
+ }
+ } else if (index == 1) { /* Right Encoder */
+ if (clockwise) {
+ register_code(KC_WRAP);
+ tap_code(KC_X);
+ unregister_code(KC_WRAP);
+ } else {
+ register_code(KC_WRAP);
+ tap_code(KC_Y);
+ unregister_code(KC_WRAP);
+ }
+ }
+}
+
+// Below stolen from TaranVH (https://github.com/TaranVH/2nd-keyboard/blob/master/HASU_USB/F24/keymap.c)
+// Shoutout to drashna on the QMK discord for basically writing this for me.... :P
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ static uint8_t f23_tracker;
+ switch (keycode) {
+ // Wrap sent keys in KC_WRAP
+ case KC_A ... KC_F22:
+ case KC_EXECUTE ... KC_EXSEL:
+ if (record->event.pressed) {
+ register_code(KC_WRAP);
+ f23_tracker++;
+ register_code(keycode);
+ } else {
+ unregister_code(keycode);
+ f23_tracker--;
+ if (!f23_tracker) {
+ unregister_code(KC_WRAP);
+ }
+ }
+ return false;
+ break;
+ }
+ return true;
+}
+
+// Below works around TD() not running key press through process_record_user
+void td_ctrl (qk_tap_dance_state_t *state, void *user_data) {
+ if (state->count == 1) {
+ register_code(KC_WRAP);
+ tap_code(KC_D);
+ unregister_code(KC_WRAP);
+ } else if (state->count == 2) {
+ layer_move(_CTRL);
+ }
+}
diff --git a/keyboards/hub20/keymaps/macro/rules.mk b/keyboards/hub20/keymaps/macro/rules.mk
new file mode 100644
index 0000000000..e5ddcae8d9
--- /dev/null
+++ b/keyboards/hub20/keymaps/macro/rules.mk
@@ -0,0 +1 @@
+TAP_DANCE_ENABLE = yes
diff --git a/keyboards/hub20/keymaps/via/keymap.c b/keyboards/hub20/keymaps/via/keymap.c
new file mode 100644
index 0000000000..75a0a927af
--- /dev/null
+++ b/keyboards/hub20/keymaps/via/keymap.c
@@ -0,0 +1,69 @@
+/* Copyright 2020 joshajohnson
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+#include QMK_KEYBOARD_H
+
+#define MO_NLCK LT(1, KC_NLCK)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT_all(
+ KC_MUTE, KC_MPLY,
+ KC_PMNS, KC_PAST, KC_PSLS, MO_NLCK,
+ KC_PPLS, KC_P7, KC_P8, KC_P9,
+ KC_PPLS, KC_P4, KC_P5, KC_P6,
+ KC_PENT, KC_P1, KC_P2, KC_P3,
+ KC_PENT, KC_PDOT, KC_P0, KC_P0
+),
+ [1] = LAYOUT_all(
+ RESET, _______,
+ RGB_TOG, RGB_RMOD, RGB_MOD, _______,
+ _______, RGB_VAD, RGB_VAI, _______,
+ _______, RGB_HUD, RGB_HUI, _______,
+ _______, RGB_SAD, RGB_SAI, _______,
+ _______, _______, _______, _______
+),
+ [2] = LAYOUT_all(
+ _______, _______,
+ _______, _______, _______, _______,
+ _______, _______, _______, _______,
+ _______, _______, _______, _______,
+ _______, _______, _______, _______,
+ _______, _______, _______, _______
+),
+ [3] = LAYOUT_all(
+ _______, _______,
+ _______, _______, _______, _______,
+ _______, _______, _______, _______,
+ _______, _______, _______, _______,
+ _______, _______, _______, _______,
+ _______, _______, _______, _______
+)
+};
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+ if (index == 0) { /* Left Encoder */
+ if (clockwise) {
+ tap_code(KC_VOLU);
+ } else {
+ tap_code(KC_VOLD);
+ }
+ } else if (index == 1) { /* Right Encoder */
+ if (clockwise) {
+ tap_code(KC_MNXT);
+ } else {
+ tap_code(KC_MPRV);
+ }
+ }
+}
diff --git a/keyboards/hub20/keymaps/via/rules.mk b/keyboards/hub20/keymaps/via/rules.mk
new file mode 100644
index 0000000000..1e5b99807c
--- /dev/null
+++ b/keyboards/hub20/keymaps/via/rules.mk
@@ -0,0 +1 @@
+VIA_ENABLE = yes
diff --git a/keyboards/hub20/mcuconf.h b/keyboards/hub20/mcuconf.h
new file mode 100644
index 0000000000..048eb4df65
--- /dev/null
+++ b/keyboards/hub20/mcuconf.h
@@ -0,0 +1,176 @@
+/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0 Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3 Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+// #define STM32F070xB
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT FALSE
+#define STM32_PVD_ENABLE FALSE
+#define STM32_PLS STM32_PLS_LEV0
+#define STM32_HSI_ENABLED TRUE
+#define STM32_HSI14_ENABLED TRUE
+#define STM32_HSI48_ENABLED FALSE
+#define STM32_LSI_ENABLED TRUE
+#define STM32_HSE_ENABLED FALSE
+#define STM32_LSE_ENABLED FALSE
+#define STM32_SW STM32_SW_PLL
+#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE 1
+#define STM32_PLLMUL_VALUE 12
+#define STM32_HPRE STM32_HPRE_DIV1
+#define STM32_PPRE STM32_PPRE_DIV1
+#define STM32_ADCSW STM32_ADCSW_HSI14
+#define STM32_ADCPRE STM32_ADCPRE_DIV4
+#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
+#define STM32_ADCPRE STM32_ADCPRE_DIV4
+#define STM32_ADCSW STM32_ADCSW_HSI14
+#define STM32_USBSW STM32_USBSW_HSI48
+#define STM32_CECSW STM32_CECSW_HSI
+#define STM32_I2C1SW STM32_I2C1SW_HSI
+#define STM32_USART1SW STM32_USART1SW_PCLK
+#define STM32_RTCSEL STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1 FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY 2
+#define STM32_ADC_IRQ_PRIORITY 2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3
+#define STM32_EXT_EXTI16_IRQ_PRIORITY 3
+#define STM32_EXT_EXTI17_IRQ_PRIORITY 3
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1 FALSE
+#define STM32_GPT_USE_TIM2 FALSE
+#define STM32_GPT_USE_TIM3 FALSE
+#define STM32_GPT_USE_TIM14 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY 2
+#define STM32_GPT_TIM2_IRQ_PRIORITY 2
+#define STM32_GPT_TIM3_IRQ_PRIORITY 2
+#define STM32_GPT_TIM14_IRQ_PRIORITY 2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1 TRUE
+#define STM32_I2C_USE_I2C2 FALSE
+#define STM32_I2C_BUSY_TIMEOUT 50
+#define STM32_I2C_I2C1_IRQ_PRIORITY 3
+#define STM32_I2C_I2C2_IRQ_PRIORITY 3
+#define STM32_I2C_USE_DMA TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY 1
+#define STM32_I2C_I2C2_DMA_PRIORITY 1
+#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1 FALSE
+#define STM32_ICU_USE_TIM2 FALSE
+#define STM32_ICU_USE_TIM3 FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY 3
+#define STM32_ICU_TIM2_IRQ_PRIORITY 3
+#define STM32_ICU_TIM3_IRQ_PRIORITY 3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED FALSE
+#define STM32_PWM_USE_TIM1 FALSE
+#define STM32_PWM_USE_TIM2 FALSE
+#define STM32_PWM_USE_TIM3 TRUE
+#define STM32_PWM_TIM1_IRQ_PRIORITY 3
+#define STM32_PWM_TIM2_IRQ_PRIORITY 3
+#define STM32_PWM_TIM3_IRQ_PRIORITY 3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1 FALSE
+#define STM32_SERIAL_USE_USART2 FALSE
+#define STM32_SERIAL_USART1_PRIORITY 3
+#define STM32_SERIAL_USART2_PRIORITY 3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1 FALSE
+#define STM32_SPI_USE_SPI2 TRUE
+#define STM32_SPI_SPI1_DMA_PRIORITY 1
+#define STM32_SPI_SPI2_DMA_PRIORITY 1
+#define STM32_SPI_SPI1_IRQ_PRIORITY 2
+#define STM32_SPI_SPI2_IRQ_PRIORITY 2
+#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 2
+#define STM32_ST_USE_TIMER 2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1 FALSE
+#define STM32_UART_USE_USART2 FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY 3
+#define STM32_UART_USART2_IRQ_PRIORITY 3
+#define STM32_UART_USART1_DMA_PRIORITY 0
+#define STM32_UART_USART2_DMA_PRIORITY 0
+#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1 TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
+#define STM32_USB_USB1_LP_IRQ_PRIORITY 3
+
+#endif /* _MCUCONF_H_ */
diff --git a/keyboards/hub20/readme.md b/keyboards/hub20/readme.md
new file mode 100755
index 0000000000..e2477b012d
--- /dev/null
+++ b/keyboards/hub20/readme.md
@@ -0,0 +1,19 @@
+# Hub20
+
+Hub20 is a 20 key macro pad with an inbuilt USB 2.0 hub and dual rotary encoders. It can be configured to be a left / right hand numberpad, along with a 4x5 1u layout.
+
+For more information regarding the keyboard, please visit the [Hub20 Website](https://www.joshajohnson.com/hub20) or [GitHub Repo](https://github.com/joshajohnson/Hub20).
+
+* Keyboard Maintainer: [Josh Johnson](https://github.com/joshajohnson)
+* Hardware Supported: Hub20 PCB (STM32F072)
+* Hardware Availability: [Josh Johnson](https://www.joshajohnson.com/hub20)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make hub20:default
+
+Flashing example for this keyboard:
+
+ make hub20:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/hub20/rules.mk b/keyboards/hub20/rules.mk
new file mode 100644
index 0000000000..b520ee35af
--- /dev/null
+++ b/keyboards/hub20/rules.mk
@@ -0,0 +1,23 @@
+# MCU name
+MCU = STM32F072
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes # Console for debug
+COMMAND_ENABLE = yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no # Enable Bluetooth
+AUDIO_ENABLE = no # Audio output
+ENCODER_ENABLE = yes
+
+# Enter lower-power sleep mode when on the ChibiOS idle thread
+OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE