1
0
Fork 0

Fixed bootloader access key

This commit is contained in:
Eiji Onchi 2017-11-26 15:26:03 +09:00 committed by Jack Humbert
parent f2a0b0ee20
commit 5fd400faa9

View file

@ -33,7 +33,7 @@ $ pip install pyusb
``` ```
If you prefer, you can just build it and flash the firmware directly with If you prefer, you can just build it and flash the firmware directly with
`bootloadHID` if you boot the board while holding down `L_Ctrl` to keep it `bootloadHID` if you boot the board while holding down `Backspace` (`Top Right Key`) to keep it
in the bootloader: in the bootloader:
``` ```
@ -43,7 +43,7 @@ $ bootloadHID -r jj40_default.hex
## Troubleshooting ## Troubleshooting
1. Try plugging the board in while pressing `L_Ctrl`. This will force it 1. Try plugging the board in while pressing `Backspace` (`Top Right Key`). This will force it
to boot only the bootloader without loading the firmware. Once this is to boot only the bootloader without loading the firmware. Once this is
done, just reflash the board with the original firmware. done, just reflash the board with the original firmware.
2. Sometimes USB hubs can act weird, so try connecting the board directly 2. Sometimes USB hubs can act weird, so try connecting the board directly