1
0
Fork 0

ps2_usb: Fix pin configuration

This commit is contained in:
Jun Wako 2015-05-18 13:58:56 +09:00
parent 2d9e0d5cab
commit 6014d1014e
3 changed files with 6 additions and 6 deletions

View file

@ -87,8 +87,8 @@ NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
# PS/2 Options # PS/2 Options
# #
PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened) #PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened)
#PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin
#PS2_USE_BUSYWAIT = yes # uses primitive reference code #PS2_USE_BUSYWAIT = yes # uses primitive reference code

View file

@ -14,7 +14,7 @@ In case of Teensy2.0(ATMega32U4):
- **USART**: **Clock** is on `PD5` and **Data** on `PD2`. - **USART**: **Clock** is on `PD5` and **Data** on `PD2`.
3. Optionally you need pull-up resistor. 1K-10K Ohm is OK. 3. Optionally you need pull-up resistor. 1K-10K Ohm is OK.
To change pin configuration edit config.h. To change pin configuration edit **config.h** and **Makefile**.
Build Firmware Build Firmware

View file

@ -50,11 +50,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define PS2_CLOCK_PORT PORTD #define PS2_CLOCK_PORT PORTD
#define PS2_CLOCK_PIN PIND #define PS2_CLOCK_PIN PIND
#define PS2_CLOCK_DDR DDRD #define PS2_CLOCK_DDR DDRD
#define PS2_CLOCK_BIT 5 #define PS2_CLOCK_BIT 1
#define PS2_DATA_PORT PORTD #define PS2_DATA_PORT PORTD
#define PS2_DATA_PIN PIND #define PS2_DATA_PIN PIND
#define PS2_DATA_DDR DDRD #define PS2_DATA_DDR DDRD
#define PS2_DATA_BIT 2 #define PS2_DATA_BIT 0
#endif #endif
/* /*
@ -69,7 +69,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define PS2_DATA_PORT PORTD #define PS2_DATA_PORT PORTD
#define PS2_DATA_PIN PIND #define PS2_DATA_PIN PIND
#define PS2_DATA_DDR DDRD #define PS2_DATA_DDR DDRD
#define PS2_DATA_BIT 2 #define PS2_DATA_BIT 0
#define PS2_INT_INIT() do { \ #define PS2_INT_INIT() do { \
EICRA |= ((1<<ISC11) | \ EICRA |= ((1<<ISC11) | \
(0<<ISC10)); \ (0<<ISC10)); \