diff --git a/keyboards/dekunukem/duckypad/chconf.h b/keyboards/dekunukem/duckypad/chconf.h
new file mode 100644
index 0000000000..85c1c9b3b9
--- /dev/null
+++ b/keyboards/dekunukem/duckypad/chconf.h
@@ -0,0 +1,714 @@
+/*
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file rt/templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+#define _CHIBIOS_RT_CONF_VER_6_0_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_ST_RESOLUTION)
+#define CH_CFG_ST_RESOLUTION 32
+#endif
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#if !defined(CH_CFG_ST_FREQUENCY)
+#define CH_CFG_ST_FREQUENCY 10000
+#endif
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE 32
+#endif
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE 32
+#endif
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#if !defined(CH_CFG_ST_TIMEDELTA)
+#define CH_CFG_ST_TIMEDELTA 2
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
+ */
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM 0
+#endif
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+#if !defined(CH_CFG_MEMCORE_SIZE)
+#define CH_CFG_MEMCORE_SIZE 0
+#endif
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
+ */
+#if !defined(CH_CFG_NO_IDLE_THREAD)
+#define CH_CFG_NO_IDLE_THREAD FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
+#define CH_CFG_OPTIMIZE_SPEED FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_TM)
+#define CH_CFG_USE_TM FALSE
+#endif
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_REGISTRY)
+#define CH_CFG_USE_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_WAITEXIT)
+#define CH_CFG_USE_WAITEXIT TRUE
+#endif
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES)
+#define CH_CFG_USE_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+#endif
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MUTEXES)
+#define CH_CFG_USE_MUTEXES TRUE
+#endif
+
+/**
+ * @brief Enables recursive behavior on mutexes.
+ * @note Recursive mutexes are heavier and have an increased
+ * memory footprint.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
+#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+#endif
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_CONDVARS)
+#define CH_CFG_USE_CONDVARS TRUE
+#endif
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
+ */
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
+#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE
+#endif
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_EVENTS)
+#define CH_CFG_USE_EVENTS TRUE
+#endif
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_EVENTS.
+ */
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+#endif
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MESSAGES)
+#define CH_CFG_USE_MESSAGES TRUE
+#endif
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
+ */
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
+#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+#endif
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_MAILBOXES)
+#define CH_CFG_USE_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMCORE)
+#define CH_CFG_USE_MEMCORE TRUE
+#endif
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#if !defined(CH_CFG_USE_HEAP)
+#define CH_CFG_USE_HEAP FALSE
+#endif
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMPOOLS)
+#define CH_CFG_USE_MEMPOOLS FALSE
+#endif
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS FALSE
+#endif
+
+/**
+ * @brief Pipes APIs.
+ * @details If enabled then the pipes APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_PIPES)
+#define CH_CFG_USE_PIPES TRUE
+#endif
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#if !defined(CH_CFG_USE_DYNAMIC)
+#define CH_CFG_USE_DYNAMIC FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY FALSE
+#endif
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+#endif
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+#endif
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+#endif
+
+/**
+ * @brief Enables factory for Pipes.
+ */
+#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
+#define CH_CFG_FACTORY_PIPES TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_STATISTICS)
+#define CH_DBG_STATISTICS FALSE
+#endif
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
+#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+#endif
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_CHECKS)
+#define CH_DBG_ENABLE_CHECKS FALSE
+#endif
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_ASSERTS)
+#define CH_DBG_ENABLE_ASSERTS FALSE
+#endif
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
+#endif
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+#endif
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
+#define CH_DBG_ENABLE_STACK_CHECK FALSE
+#endif
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_FILL_THREADS)
+#define CH_DBG_FILL_THREADS FALSE
+#endif
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
+ */
+#if !defined(CH_DBG_THREADS_PROFILING)
+#define CH_DBG_THREADS_PROFILING FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p _thread_init() function.
+ *
+ * @note It is invoked from within @p _thread_init() and implicitly from all
+ * the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* Context switch code here.*/ \
+}
+
+/**
+ * @brief ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
+ /* IRQ prologue code here.*/ \
+}
+
+/**
+ * @brief ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
+ /* IRQ epilogue code here.*/ \
+}
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
+}
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() { \
+ /* System tick event code here.*/ \
+}
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
+ /* System halt code here.*/ \
+}
+
+/**
+ * @brief Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ * trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) { \
+ /* Trace code here.*/ \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* CHCONF_H */
+
+/** @} */
diff --git a/keyboards/dekunukem/duckypad/config.h b/keyboards/dekunukem/duckypad/config.h
new file mode 100644
index 0000000000..27806ab83d
--- /dev/null
+++ b/keyboards/dekunukem/duckypad/config.h
@@ -0,0 +1,61 @@
+/*
+
+QMK Firmware for dekuNukem/duckyPad
+
+Copyright (C) 2020 Max Bridgland <@M4cs>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see .
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0B91
+#define DEVICE_VER 0x0001
+#define MANUFACTURER dekuNukem
+#define PRODUCT duckyPad
+
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 17
+
+#define DIRECT_PINS {{ B13, B14, B15, A8, A15, B3, B4, B5, B6, B7, C13, C14, C15, F0, F1, A1, A2 }}
+
+#define RGB_DI_PIN A10
+#define RGBLED_NUM 15
+#define DRIVER_LED_TOTAL 15
+
+#define RGB_MATRIX_KEYPRESSES
+#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+#define RGB_MATRIX_STARTUP_HUE 221
+
+#define I2C1_SCL_BANK GPIOB
+#define I2C1_SCL 8
+#define I2C1_SDA_BANK GPIOB
+#define I2C1_SDA 9
+
+#define I2C1_SCL_PAL_MODE 1
+#define I2C1_SDA_PAL_MODE 1
+
+#define I2C1_OPMODE OPMODE_I2C
+#define I2C1_CLOCK_SPEED 100000
+#define I2C1_DUTY_CYCLE STD_DUTY_CYCLE
+
+#define OLED_DISPLAY_ADDRESS 0x3C
+#define OLED_DISPLAY_128X64
+#define OLED_COM_PINS 0x12
+
+#define OLED_IC OLED_IC_SH1106
+#define OLED_COLUMN_OFFSET 2
diff --git a/keyboards/dekunukem/duckypad/duckypad.c b/keyboards/dekunukem/duckypad/duckypad.c
new file mode 100644
index 0000000000..831a42a048
--- /dev/null
+++ b/keyboards/dekunukem/duckypad/duckypad.c
@@ -0,0 +1,53 @@
+/*
+
+QMK Firmware for dekuNukem/duckyPad
+
+Copyright (C) 2020 Anthony Som
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see .
+*/
+
+#include "duckypad.h"
+
+led_config_t g_led_config = { {
+ { 2, 1, 0, 3, 4, 5, 8, 7, 6, 9, 10, 11, 14, 13, 12, NO_LED, NO_LED }
+}, {
+ {224, 0},
+ {112, 0},
+ {0, 0},
+ {0, 16},
+ {112, 16},
+ {224, 16},
+ {224, 32},
+ {112, 32},
+ {0, 32},
+ {0, 48},
+ {112, 48},
+ {224, 48},
+ {224, 64},
+ {112, 64},
+ {0, 64},
+}, {
+ 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+} };
+
+void keyboard_pre_init_kb(void) {
+ setPinOutput(A0);
+ writePinHigh(A0);
+ writePinLow(A0);
+ wait_ms(10);
+ writePinHigh(A0);
+
+ keyboard_pre_init_user();
+}
diff --git a/keyboards/dekunukem/duckypad/duckypad.h b/keyboards/dekunukem/duckypad/duckypad.h
new file mode 100644
index 0000000000..abde7aac65
--- /dev/null
+++ b/keyboards/dekunukem/duckypad/duckypad.h
@@ -0,0 +1,32 @@
+/*
+
+QMK Firmware for dekuNukem/duckyPad
+
+Copyright (C) 2020 Anthony Som
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see .
+*/
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+ k00, k01, k02, \
+ k10, k11, k12, \
+ k20, k21, k22, \
+ k30, k31, k32, \
+ k40, k41, k42, \
+ kDown, kUp \
+) {{k00, k01, k02, k10, k11, k12, k20, k21, k22, k30, k31, k32, k40, k41, k42, kDown, kUp}}
diff --git a/keyboards/dekunukem/duckypad/halconf.h b/keyboards/dekunukem/duckypad/halconf.h
new file mode 100644
index 0000000000..d08e88460f
--- /dev/null
+++ b/keyboards/dekunukem/duckypad/halconf.h
@@ -0,0 +1,525 @@
+/*
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/halconf.h
+ * @brief HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ * various device drivers from your application. You may also use
+ * this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef HALCONF_H
+#define HALCONF_H
+
+#define _CHIBIOS_HAL_CONF_
+#define _CHIBIOS_HAL_CONF_VER_7_0_
+
+#include "mcuconf.h"
+
+/**
+ * @brief Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL TRUE
+#endif
+
+/**
+ * @brief Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC FALSE
+#endif
+
+/**
+ * @brief Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN FALSE
+#endif
+
+/**
+ * @brief Enables the cryptographic subsystem.
+ */
+#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
+#define HAL_USE_CRY FALSE
+#endif
+
+/**
+ * @brief Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC FALSE
+#endif
+
+/**
+ * @brief Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT FALSE
+#endif
+
+/**
+ * @brief Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C TRUE
+#endif
+
+/**
+ * @brief Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S FALSE
+#endif
+
+/**
+ * @brief Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU FALSE
+#endif
+
+/**
+ * @brief Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC FALSE
+#endif
+
+/**
+ * @brief Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI TRUE
+#endif
+
+/**
+ * @brief Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM TRUE
+#endif
+
+/**
+ * @brief Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC FALSE
+#endif
+
+/**
+ * @brief Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB FALSE
+#endif
+
+/**
+ * @brief Enables the SIO subsystem.
+ */
+#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
+#define HAL_USE_SIO FALSE
+#endif
+
+/**
+ * @brief Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI TRUE
+#endif
+
+/**
+ * @brief Enables the TRNG subsystem.
+ */
+#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
+#define HAL_USE_TRNG FALSE
+#endif
+
+/**
+ * @brief Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART FALSE
+#endif
+
+/**
+ * @brief Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB TRUE
+#endif
+
+/**
+ * @brief Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG FALSE
+#endif
+
+/**
+ * @brief Enables the WSPI subsystem.
+ */
+#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
+#define HAL_USE_WSPI FALSE
+#endif
+
+/*===========================================================================*/
+/* PAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define PAL_USE_CALLBACKS FALSE
+#endif
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
+#define PAL_USE_WAIT FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE TRUE
+#endif
+
+/**
+ * @brief Enforces the driver to use direct callbacks rather than OSAL events.
+ */
+#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define CAN_ENFORCE_USE_CALLBACKS FALSE
+#endif
+
+/*===========================================================================*/
+/* CRY driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the SW fall-back of the cryptographic driver.
+ * @details When enabled, this option, activates a fall-back software
+ * implementation for algorithms not supported by the underlying
+ * hardware.
+ * @note Fall-back implementations may not be present for all algorithms.
+ */
+#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_USE_FALLBACK FALSE
+#endif
+
+/**
+ * @brief Makes the driver forcibly use the fall-back implementations.
+ */
+#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_ENFORCE_FALLBACK FALSE
+#endif
+
+/*===========================================================================*/
+/* DAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
+#define DAC_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define DAC_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the zero-copy API.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY FALSE
+#endif
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ * This option is recommended also if the SPI driver does not
+ * use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Number of initialization attempts before rejecting the card.
+ * @note Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY 100
+#endif
+
+/**
+ * @brief Include support for MMC cards.
+ * @note MMC support is not yet implemented so this option must be kept
+ * at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT FALSE
+#endif
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING TRUE
+#endif
+
+/**
+ * @brief OCR initialization constant for V20 cards.
+ */
+#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
+#define SDC_INIT_OCR_V20 0x50FF8000U
+#endif
+
+/**
+ * @brief OCR initialization constant for non-V20 cards.
+ */
+#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
+#define SDC_INIT_OCR 0x80100000U
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ * default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE 38400
+#endif
+
+/**
+ * @brief Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ * buffers depending on the requirements of your application.
+ * @note The default is 16 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE 16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting. */
+/*===========================================================================*/
+
+/**
+ * @brief Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ * the USB data endpoint maximum packet size.
+ * @note The default is 256 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE 1
+#endif
+
+/**
+ * @brief Serial over USB number of buffers.
+ * @note The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER 2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables circular transfers APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
+#define SPI_USE_CIRCULAR FALSE
+#endif
+
+
+/**
+ * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/**
+ * @brief Handling method for SPI CS line.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
+#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT FALSE
+#endif
+
+/**
+ * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT TRUE
+#endif
+
+/*===========================================================================*/
+/* WSPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
+#define WSPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define WSPI_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+#endif /* HALCONF_H */
+
+/** @} */
diff --git a/keyboards/dekunukem/duckypad/info.json b/keyboards/dekunukem/duckypad/info.json
new file mode 100644
index 0000000000..664e9314c9
--- /dev/null
+++ b/keyboards/dekunukem/duckypad/info.json
@@ -0,0 +1,30 @@
+{
+ "keyboard_name": "duckyPad",
+ "url": "https://github.com/dekuNukem/",
+ "maintainer": "M4cs",
+ "width": 3,
+ "height": 5,
+ "layouts": {
+ "LAYOUT": {
+ "layout": [
+ {"x": 0, "y": 0},
+ {"x": 1, "y": 0},
+ {"x": 2, "y": 0},
+ {"x": 0, "y": 1},
+ {"x": 1, "y": 1},
+ {"x": 2, "y": 1},
+ {"x": 0, "y": 2},
+ {"x": 1, "y": 2},
+ {"x": 2, "y": 2},
+ {"x": 0, "y": 3},
+ {"x": 1, "y": 3},
+ {"x": 2, "y": 3},
+ {"x": 0, "y": 4},
+ {"x": 1, "y": 4},
+ {"x": 2, "y": 4},
+ {"x": 3, "y": 4},
+ {"x": 4, "y": 4}
+ ]
+ }
+ }
+}
diff --git a/keyboards/dekunukem/duckypad/keymaps/default/config.h b/keyboards/dekunukem/duckypad/keymaps/default/config.h
new file mode 100644
index 0000000000..9d26b71162
--- /dev/null
+++ b/keyboards/dekunukem/duckypad/keymaps/default/config.h
@@ -0,0 +1,59 @@
+/*
+
+Default Keymap Config for dekuNukem/duckyPad QMK firmware
+
+Copyright (C) 2020 Max Bridgland
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see .
+*/
+
+#pragma once
+
+#define NO_ACTION_FUNCTION
+#define NO_ACTION_ONESHOT
+
+#define OLED_TIMEOUT 90000
+#define RGB_DISABLE_TIMEOUT 90000
+
+#define MT_0_0 " 1 "
+#define MT_0_1 " 2 "
+#define MT_0_2 " 3 "
+#define MT_0_3 " 4 "
+#define MT_0_4 " 5 "
+#define MT_0_5 " 6 "
+#define MT_0_6 " 7 "
+#define MT_0_7 " 8 "
+#define MT_0_8 " 9 "
+#define MT_0_9 " . "
+#define MT_0_10 " 0 "
+#define MT_0_11 " = "
+#define MT_0_12 " - "
+#define MT_0_13 " + "
+#define MT_0_14 " enter"
+
+#define MT_1_0 " stat "
+#define MT_1_1 " brth "
+#define MT_1_2 " rbow "
+#define MT_1_3 " swrl "
+#define MT_1_4 " spd- "
+#define MT_1_5 " spd+ "
+#define MT_1_6 " eff- "
+#define MT_1_7 " sat- "
+#define MT_1_8 " sat+ "
+#define MT_1_9 " eff+ "
+#define MT_1_10 " hue- "
+#define MT_1_11 " hue+ "
+#define MT_1_12 " powr "
+#define MT_1_13 " bri- "
+#define MT_1_14 " bri+ "
diff --git a/keyboards/dekunukem/duckypad/keymaps/default/keymap.c b/keyboards/dekunukem/duckypad/keymaps/default/keymap.c
new file mode 100644
index 0000000000..3b30c42ff3
--- /dev/null
+++ b/keyboards/dekunukem/duckypad/keymaps/default/keymap.c
@@ -0,0 +1,159 @@
+/*
+
+Default Keymap for dekuNukem/duckyPad QMK firmware
+
+Copyright (C) 2020 Max Bridgland
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see .
+*/
+
+#include QMK_KEYBOARD_H
+
+#include "stdio.h"
+#include
+#include
+
+#define LOGO_SIZE 384
+
+bool rgbToggled = false;
+
+enum layer_codes {
+ RGB_LAYER = SAFE_RANGE
+};
+
+enum my_keycodes {
+ Z0 = SAFE_RANGE, Z1, Z2,
+ Z3, Z4, Z5,
+ Z6, Z7, Z8,
+ Z9, Z10, Z11,
+ Z12, Z13, Z14
+};
+
+#define _DEFAULT 0
+#define _RGB 1
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /*
+ ,=========================================.
+ | Numpad 1 | Numpad 2 | Numpad 3 |
+ |=========================================|
+ | Numpad 4 | Numpad 5 | Numpad 6 |
+ |=========================================|
+ | Numpad 7 | Numpad 8 | Numpad 9 |
+ |=========================================|
+ | Numpad . | Numpad 0 | Numpad = |
+ |=========================================| ,---------------------.
+ | Numpad - | Numpad + | Numpad * | | RGB Menu | Blank |
+ `=========================================' `--------------------'
+ */
+ [_DEFAULT] = LAYOUT(
+ KC_P1, KC_P2, KC_P3,
+ KC_P4, KC_P5, KC_P6,
+ KC_P7, KC_P8, KC_P9,
+ KC_PDOT, KC_P0, KC_PENT,
+ KC_PMNS, KC_PPLS, KC_EQL,
+ RGB_LAYER, KC_NO
+ ),
+ /*
+ ,=========================================.
+ | Plain RGB | Breathe RGB | Rainbow RGB |
+ |=========================================|
+ | Swirl RGB | Speed Down | Speed Up |
+ |=========================================|
+ | Effect Up | Sat. Down | Sat. Up |
+ |=========================================|
+ | Effect Down | Hue Down | Hue Up |
+ |=========================================| ,----------------------.
+ | Toggle RGB | Brt. Down | Brt. Up | | Norm Menu | Blank |
+ `=========================================' `---------------------'
+ */
+ [_RGB] = LAYOUT(
+ RGB_MODE_PLAIN, RGB_MODE_BREATHE, RGB_MODE_RAINBOW,
+ RGB_MODE_SWIRL, RGB_SPD, RGB_SPI,
+ RGB_MOD, RGB_SAD, RGB_SAI,
+ RGB_RMOD, RGB_HUD, RGB_HUI,
+ RGB_TOG, RGB_VAD, RGB_VAI,
+ RGB_LAYER, KC_NO
+ )
+};
+
+static void render_logo(void) {
+ static const char PROGMEM ducky_logo[LOGO_SIZE] = {
+ 0, 0, 0, 0,128,128,128,128,128, 0, 0,252,252,252, 0, 0, 0,128,128,128, 0, 0, 0, 0, 0,128,128,128, 0, 0, 0, 0, 0,128,128,128,128,128, 0, 0, 0, 0, 0,252,252,252, 0, 0, 0, 0, 0,128,128,128,128,128,128, 0, 0, 0, 0, 0, 0,128,128,128,128, 0,248,248,248, 56, 56, 56, 56, 56, 56,120,240,224,192, 0, 0,128,128,128,128,128,128, 0, 0, 0, 0, 0, 0, 0, 0,128,128,128,128,128, 0, 0,252,252,252, 0, 0, 0, 0, 0,232, 24, 24,232, 0, 24, 48, 48, 24, 0,232, 24, 24,232, 0, 0,
+ 0,248,254,255,143, 7, 3, 3, 3, 7,142,255,255,255, 0, 0, 0,255,255,255, 0, 0, 0, 0, 0,255,255,255, 0,248,254,255,143, 7, 3, 3, 3, 3,143, 7, 2, 0, 0,255,255,255,240,120,252,254,231,131, 1, 0, 1, 7, 63,254,240,192, 0,224,252,127, 31, 3, 0, 0,255,255,255,112,112,112,112,112,112, 56, 63, 31, 15,193,231,243,115, 51, 51, 51, 55,255,255,252, 0, 0,248,254,255,143, 7, 3, 3, 3, 7,142,255,255,255, 0, 0, 0, 0, 0, 21,127,127,252,252,252,253,253,252,252,252,255,255,255, 0, 0,
+ 0, 0, 3, 7, 15, 15, 14, 14, 14, 7, 3, 15, 15, 15, 0, 0, 0, 3, 7, 15, 15, 14, 14, 6, 3, 15, 15, 15, 0, 0, 3, 7, 7, 15, 14, 14, 14, 14, 7, 7, 2, 0, 0, 15, 15, 15, 0, 0, 0, 1, 3, 15, 15, 12,136,224,224,224,247,127,127, 31, 3, 0, 0, 0, 0, 0, 15, 15, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3, 7, 15, 14, 14, 14, 6, 3, 15, 15, 15, 0, 0, 0, 3, 7, 15, 15, 14, 14, 14, 7, 3, 15, 15, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 8, 7, 11, 3, 11, 7, 11, 7, 7, 31, 0, 0
+ };
+ oled_write_raw_P(ducky_logo, LOGO_SIZE);
+}
+
+char* make_menu_text(void){
+ char *s = malloc((30 * 6) * sizeof(*s));
+ int width = 3;
+ sprintf(s, "%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s",
+ width, MT_0_0, width, MT_0_1, width, MT_0_2,
+ width, MT_0_3, width, MT_0_4, width, MT_0_5,
+ width, MT_0_6, width, MT_0_7, width, MT_0_8,
+ width, MT_0_9, width, MT_0_10, width,MT_0_11,
+ width, MT_0_12, width, MT_0_13, width, MT_0_14
+ );
+ return s;
+};
+
+char* make_rgb_text(void){
+ char *s = malloc((30 * 6) * sizeof(*s));
+ int width = 3;
+ sprintf(
+ s, "%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s",
+ width, MT_1_0, width, MT_1_1, width, MT_1_2,
+ width, MT_1_3, width, MT_1_4, width, MT_1_5,
+ width, MT_1_6, width, MT_1_7, width, MT_1_8,
+ width, MT_1_9, width, MT_1_10, width,MT_1_11,
+ width, MT_1_12, width, MT_1_13, width, MT_1_14
+ );
+ return s;
+};
+
+void oled_task_user(void) {
+ render_logo();
+ oled_set_cursor(0,3);
+ if (rgbToggled) {
+ char *s = make_rgb_text();
+ oled_write_ln_P(s, false);
+ free(s);
+ } else {
+ char *s = make_menu_text();
+ oled_write_ln_P(s, false);
+ free(s);
+ }
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case RGB_LAYER:
+ if (record->event.pressed) {
+ if (rgbToggled) {
+ rgbToggled = false;
+ layer_clear();
+ } else {
+ rgbToggled = true;
+ layer_on(_RGB);
+ }
+ }
+ return false;
+ default:
+ return true;
+ }
+ return false;
+}
diff --git a/keyboards/dekunukem/duckypad/keymaps/default/readme.md b/keyboards/dekunukem/duckypad/keymaps/default/readme.md
new file mode 100644
index 0000000000..0240cd573b
--- /dev/null
+++ b/keyboards/dekunukem/duckypad/keymaps/default/readme.md
@@ -0,0 +1,19 @@
+Default duckyPad Layout
+
+### Layers:
+
+0: Default Layer w/ Numpad Functionality
+
+1: RGB Menu that allows RGB customization
+
+### Configuration:
+
+To change the menu, edit the `MT_X_XX` values in `config.h`. The sytax is as follows: `MT_A_B`, where A equals the layer, and B equals the key from 0-14.
+
+### Need Help?
+
+Contact me on discord: macs#0420
+
+or join the duckyPad Discord and find me in there :)
+
+https://discord.gg/ADtrCjf
diff --git a/keyboards/dekunukem/duckypad/keymaps/m4cs/config.h b/keyboards/dekunukem/duckypad/keymaps/m4cs/config.h
new file mode 100644
index 0000000000..7d0bbb1341
--- /dev/null
+++ b/keyboards/dekunukem/duckypad/keymaps/m4cs/config.h
@@ -0,0 +1,75 @@
+/*
+
+M4cs Keymap for dekuNukem/duckyPad QMK firmware
+
+Copyright (C) 2020 Max Bridgland
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see .
+*/
+
+#pragma once
+
+#define NO_ACTION_FUNCTION
+#define NO_ACTION_ONESHOT
+
+#define OLED_TIMEOUT 90000
+#define RGB_DISABLE_TIMEOUT 90000
+
+#define MT_0_0 " prev "
+#define MT_0_1 " pl/pa"
+#define MT_0_2 " next "
+#define MT_0_3 " volx "
+#define MT_0_4 " vol- "
+#define MT_0_5 " vol+ "
+#define MT_0_6 " spot "
+#define MT_0_7 " ffox "
+#define MT_0_8 " code "
+#define MT_0_9 " term "
+#define MT_0_10 " steam"
+#define MT_0_11 " dscd "
+#define MT_0_12 " "
+#define MT_0_13 " micx "
+#define MT_0_14 " "
+
+#define MT_1_0 " stat "
+#define MT_1_1 " brth "
+#define MT_1_2 " rbow "
+#define MT_1_3 " swrl "
+#define MT_1_4 " spd- "
+#define MT_1_5 " spd+ "
+#define MT_1_6 " eff- "
+#define MT_1_7 " sat- "
+#define MT_1_8 " sat+ "
+#define MT_1_9 " eff+ "
+#define MT_1_10 " hue- "
+#define MT_1_11 " hue+ "
+#define MT_1_12 " powr "
+#define MT_1_13 " bri- "
+#define MT_1_14 " bri+ "
+
+#define MT_2_0 " "
+#define MT_2_1 " "
+#define MT_2_2 " "
+#define MT_2_3 " undo "
+#define MT_2_4 " cut "
+#define MT_2_5 " copy "
+#define MT_2_6 " paste"
+#define MT_2_7 " find "
+#define MT_2_8 " pscr "
+#define MT_2_9 " "
+#define MT_2_10 " "
+#define MT_2_11 " "
+#define MT_2_12 " "
+#define MT_2_13 " "
+#define MT_2_14 " "
diff --git a/keyboards/dekunukem/duckypad/keymaps/m4cs/keymap.c b/keyboards/dekunukem/duckypad/keymaps/m4cs/keymap.c
new file mode 100644
index 0000000000..2ce15d7e77
--- /dev/null
+++ b/keyboards/dekunukem/duckypad/keymaps/m4cs/keymap.c
@@ -0,0 +1,236 @@
+/*
+
+M4cs Keymap for dekuNukem/duckyPad QMK firmware
+
+Copyright (C) 2020 Max Bridgland
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see .
+*/
+
+#include QMK_KEYBOARD_H
+
+#include "stdio.h"
+#include
+#include
+
+#define LOGO_SIZE 384
+
+bool rgbToggled = false;
+bool altToggled = false;
+
+enum layer_codes {
+ RGB_LAYER = SAFE_RANGE,
+ ALT_LAYER
+};
+
+enum my_keycodes {
+ Z0 = SAFE_RANGE, Z1, Z2,
+ Z3, Z4, Z5,
+ Z6, Z7, Z8,
+ Z9, Z10, Z11,
+ Z12, Z13, Z14
+};
+
+#define MAC_1 LCTL(LALT(KC_MINS))
+#define MAC_2 LCTL(LALT(KC_EQL))
+#define MAC_3 LCTL(LALT(KC_LBRC))
+#define MAC_4 LCTL(LALT(KC_RBRC))
+#define MAC_5 LCTL(LALT(KC_BSLS))
+#define MAC_6 LCTL(LALT(KC_SCLN))
+#define MAC_7 LCTL(LALT(KC_QUOT))
+#define MAC_8 LCTL(LALT(KC_COMM))
+#define MAC_9 LCTL(LALT(KC_SLSH))
+
+#define MAC_10 LCTL(LSFT(KC_MINS))
+#define MAC_11 LCTL(LSFT(KC_EQL))
+#define MAC_12 LCTL(LSFT(KC_SLSH))
+#define MAC_13 LCTL(LSFT(KC_LBRC))
+#define MAC_14 LCTL(LSFT(KC_RBRC))
+#define MAC_15 LCTL(LSFT(KC_BSLS))
+#define MAC_16 LCTL(LSFT(KC_SCLN))
+#define MAC_17 LCTL(LSFT(KC_QUOT))
+#define MAC_18 LCTL(LSFT(KC_COMM))
+
+#define _DEFAULT 0
+#define _RGB 1
+#define _ALT 2
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /*
+ ,=========================================.
+ | Media Prev. | Media Play | Media Next |
+ |=========================================|
+ | Mute Sound | Volume Do. | Volume Up |
+ |=========================================|
+ | Macro 1 | Macro 2 | Macro 3 |
+ |=========================================|
+ | Macro 4 | Macro 5 | Macro 6 |
+ |=========================================| ,---------------------.
+ | Macro 7 | Macro 8 | Macro 9 | | RGB Menu | Alt Menu |
+ `=========================================' `--------------------'
+ */
+ [_DEFAULT] = LAYOUT(
+ KC_MEDIA_PREV_TRACK, KC_MEDIA_PLAY_PAUSE, KC_MEDIA_NEXT_TRACK,
+ KC_AUDIO_MUTE, KC_AUDIO_VOL_DOWN, KC_AUDIO_VOL_UP,
+ MAC_1, MAC_2, MAC_3,
+ MAC_4, MAC_5, MAC_6,
+ MAC_7, MAC_8, MAC_9,
+ RGB_LAYER, ALT_LAYER
+ ),
+ /*
+ ,=========================================.
+ | Plain RGB | Breathe RGB | Rainbow RGB |
+ |=========================================|
+ | Swirl RGB | Speed Down | Speed Up |
+ |=========================================|
+ | Effect Up | Sat. Down | Sat. Up |
+ |=========================================|
+ | Effect Down | Hue Down | Hue Up |
+ |=========================================| ,----------------------.
+ | Toggle RGB | Brt. Down | Brt. Up | | Norm Menu | Alt Menu |
+ `=========================================' `---------------------'
+ */
+ [_RGB] = LAYOUT(
+ RGB_MODE_PLAIN, RGB_MODE_BREATHE, RGB_MODE_RAINBOW,
+ RGB_MODE_SWIRL, RGB_SPD, RGB_SPI,
+ RGB_MOD, RGB_SAD, RGB_SAI,
+ RGB_RMOD, RGB_HUD, RGB_HUI,
+ RGB_TOG, RGB_VAD, RGB_VAI,
+ RGB_LAYER, ALT_LAYER
+ ),
+ /*
+ ,=========================================.
+ | Macro 10 | Macro 11 | Macro 12 |
+ |=========================================|
+ | Undo | Cut | Copy |
+ |=========================================|
+ | Paste | Find | Prnt Scrn. |
+ |=========================================|
+ | Macro 13 | Macro 14 | Macro 15 |
+ |=========================================| ,----------------------.
+ | Macro 16 | Macro 17 | Macro 18 | | Norm Menu | Alt Menu |
+ `=========================================' `---------------------'
+ */
+ [_ALT] = LAYOUT(
+ MAC_10, MAC_11, MAC_12,
+ KC_UNDO, KC_CUT, KC_COPY,
+ KC_PASTE, KC_FIND, KC_PSCR,
+ MAC_13, MAC_14, MAC_15,
+ MAC_16, MAC_17, MAC_18,
+ RGB_LAYER, ALT_LAYER
+ )
+};
+
+static void render_logo(void) {
+ static const char PROGMEM ducky_logo[LOGO_SIZE] = {
+ 0, 0, 0, 0,128,128,128,128,128, 0, 0,252,252,252, 0, 0, 0,128,128,128, 0, 0, 0, 0, 0,128,128,128, 0, 0, 0, 0, 0,128,128,128,128,128, 0, 0, 0, 0, 0,252,252,252, 0, 0, 0, 0, 0,128,128,128,128,128,128, 0, 0, 0, 0, 0, 0,128,128,128,128, 0,248,248,248, 56, 56, 56, 56, 56, 56,120,240,224,192, 0, 0,128,128,128,128,128,128, 0, 0, 0, 0, 0, 0, 0, 0,128,128,128,128,128, 0, 0,252,252,252, 0, 0, 0, 0, 0,232, 24, 24,232, 0, 24, 48, 48, 24, 0,232, 24, 24,232, 0, 0,
+ 0,248,254,255,143, 7, 3, 3, 3, 7,142,255,255,255, 0, 0, 0,255,255,255, 0, 0, 0, 0, 0,255,255,255, 0,248,254,255,143, 7, 3, 3, 3, 3,143, 7, 2, 0, 0,255,255,255,240,120,252,254,231,131, 1, 0, 1, 7, 63,254,240,192, 0,224,252,127, 31, 3, 0, 0,255,255,255,112,112,112,112,112,112, 56, 63, 31, 15,193,231,243,115, 51, 51, 51, 55,255,255,252, 0, 0,248,254,255,143, 7, 3, 3, 3, 7,142,255,255,255, 0, 0, 0, 0, 0, 21,127,127,252,252,252,253,253,252,252,252,255,255,255, 0, 0,
+ 0, 0, 3, 7, 15, 15, 14, 14, 14, 7, 3, 15, 15, 15, 0, 0, 0, 3, 7, 15, 15, 14, 14, 6, 3, 15, 15, 15, 0, 0, 3, 7, 7, 15, 14, 14, 14, 14, 7, 7, 2, 0, 0, 15, 15, 15, 0, 0, 0, 1, 3, 15, 15, 12,136,224,224,224,247,127,127, 31, 3, 0, 0, 0, 0, 0, 15, 15, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3, 7, 15, 14, 14, 14, 6, 3, 15, 15, 15, 0, 0, 0, 3, 7, 15, 15, 14, 14, 14, 7, 3, 15, 15, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 8, 7, 11, 3, 11, 7, 11, 7, 7, 31, 0, 0
+ };
+ oled_write_raw_P(ducky_logo, LOGO_SIZE);
+}
+
+char* make_menu_text(void){
+ char *s = malloc((30 * 3) * sizeof(*s));
+ int width = 3;
+ sprintf(s, "%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s",
+ width, MT_0_0, width, MT_0_1, width, MT_0_2,
+ width, MT_0_3, width, MT_0_4, width, MT_0_5,
+ width, MT_0_6, width, MT_0_7, width, MT_0_8,
+ width, MT_0_9, width, MT_0_10, width,MT_0_11,
+ width, MT_0_12, width, MT_0_13, width, MT_0_14
+ );
+ return s;
+};
+
+char* make_rgb_text(void){
+ char *s = malloc((30 * 3) * sizeof(*s));
+ int width = 3;
+ sprintf(
+ s, "%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s",
+ width, MT_1_0, width, MT_1_1, width, MT_1_2,
+ width, MT_1_3, width, MT_1_4, width, MT_1_5,
+ width, MT_1_6, width, MT_1_7, width, MT_1_8,
+ width, MT_1_9, width, MT_1_10, width,MT_1_11,
+ width, MT_1_12, width, MT_1_13, width, MT_1_14
+ );
+ return s;
+};
+
+char* make_alt_text(void){
+ char *s = malloc((30 * 3) * sizeof(*s));
+ int width = 3;
+ sprintf(
+ s, "%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s\n%-*s %-*s %-*s",
+ width, MT_2_0, width, MT_2_1, width, MT_2_2,
+ width, MT_2_3, width, MT_2_4, width, MT_2_5,
+ width, MT_2_6, width, MT_2_7, width, MT_2_8,
+ width, MT_2_9, width, MT_2_10, width,MT_2_11,
+ width, MT_2_12, width, MT_2_13, width, MT_2_14
+ );
+ return s;
+};
+
+void oled_task_user(void) {
+ render_logo();
+ oled_set_cursor(0,3);
+ if (rgbToggled) {
+ char *s = make_rgb_text();
+ oled_write_ln_P(s, false);
+ free(s);
+ } else if (altToggled) {
+ char *s = make_alt_text();
+ oled_write_ln_P(s, false);
+ free(s);
+ } else {
+ char *s = make_menu_text();
+ oled_write_ln_P(s, false);
+ free(s);
+ }
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case RGB_LAYER:
+ if (record->event.pressed) {
+ if (rgbToggled) {
+ rgbToggled = false;
+ altToggled = false;
+ layer_clear();
+ } else {
+ rgbToggled = true;
+ altToggled = false;
+ layer_on(_RGB);
+ }
+ }
+ return false;
+ case ALT_LAYER:
+ if (record->event.pressed) {
+ if (altToggled) {
+ rgbToggled = false;
+ altToggled = false;
+ layer_clear();
+ } else {
+ rgbToggled = false;
+ altToggled = true;
+ layer_on(_ALT);
+ }
+ }
+ return false;
+ default:
+ return true;
+ }
+ return false;
+}
diff --git a/keyboards/dekunukem/duckypad/keymaps/m4cs/readme.md b/keyboards/dekunukem/duckypad/keymaps/m4cs/readme.md
new file mode 100644
index 0000000000..42fae00440
--- /dev/null
+++ b/keyboards/dekunukem/duckypad/keymaps/m4cs/readme.md
@@ -0,0 +1,25 @@
+[M4cs'](https://github.com/M4cs) duckyPad Layout
+
+### Layers:
+
+0: Default Layer w/ Media Functionality and Macros
+
+1: RGB Menu that allows RGB customization
+
+2: Alternate Macro Menu
+
+### Configuration:
+
+To change the menu, edit the `MT_X_XX` values in `config.h`. The sytax is as follows: `MT_A_B`, where A equals the layer, and B equals the key from 0-14.
+
+### Misc. Info:
+
+The macros currently just map to Ctrl + Alt + (Different Keys) right now. I have them launching certain shortcuts. I recommend you change these and add your shortcuts to match your shortcut manager.
+
+### Need Help?
+
+Contact me on discord: macs#0420
+
+or join the duckyPad Discord and find me in there :)
+
+https://discord.gg/ADtrCjf
\ No newline at end of file
diff --git a/keyboards/dekunukem/duckypad/keymaps/m4cs/rules.mk b/keyboards/dekunukem/duckypad/keymaps/m4cs/rules.mk
new file mode 100644
index 0000000000..8706546668
--- /dev/null
+++ b/keyboards/dekunukem/duckypad/keymaps/m4cs/rules.mk
@@ -0,0 +1,2 @@
+LTO_ENABLE = yes # Enable Link Time Optimization
+NO_USB_STARTUP_CHECK = yes # Disables usb suspend check after keyboard startup
diff --git a/keyboards/dekunukem/duckypad/mcuconf.h b/keyboards/dekunukem/duckypad/mcuconf.h
new file mode 100644
index 0000000000..201db101dc
--- /dev/null
+++ b/keyboards/dekunukem/duckypad/mcuconf.h
@@ -0,0 +1,178 @@
+/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0 Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3 Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+// #define STM32F070xB
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT FALSE
+#define STM32_PVD_ENABLE FALSE
+#define STM32_PLS STM32_PLS_LEV0
+#define STM32_HSI_ENABLED TRUE
+#define STM32_HSI14_ENABLED TRUE
+#define STM32_HSI48_ENABLED FALSE
+#define STM32_LSI_ENABLED TRUE
+#define STM32_HSE_ENABLED FALSE
+#define STM32_LSE_ENABLED FALSE
+#define STM32_SW STM32_SW_PLL
+#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE 1
+#define STM32_PLLMUL_VALUE 12
+#define STM32_HPRE STM32_HPRE_DIV1
+#define STM32_PPRE STM32_PPRE_DIV1
+#define STM32_ADCSW STM32_ADCSW_HSI14
+#define STM32_ADCPRE STM32_ADCPRE_DIV4
+#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
+#define STM32_ADCPRE STM32_ADCPRE_DIV4
+#define STM32_ADCSW STM32_ADCSW_HSI14
+#define STM32_USBSW STM32_USBSW_HSI48
+#define STM32_CECSW STM32_CECSW_HSI
+#define STM32_I2C1SW STM32_I2C1SW_HSI
+#define STM32_USART1SW STM32_USART1SW_PCLK
+#define STM32_RTCSEL STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1 FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY 2
+#define STM32_ADC_IRQ_PRIORITY 2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3
+#define STM32_EXT_EXTI16_IRQ_PRIORITY 3
+#define STM32_EXT_EXTI17_IRQ_PRIORITY 3
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1 FALSE
+#define STM32_GPT_USE_TIM2 FALSE
+#define STM32_GPT_USE_TIM3 FALSE
+#define STM32_GPT_USE_TIM14 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY 2
+#define STM32_GPT_TIM2_IRQ_PRIORITY 2
+#define STM32_GPT_TIM3_IRQ_PRIORITY 2
+#define STM32_GPT_TIM14_IRQ_PRIORITY 2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1 TRUE
+#define STM32_I2C_USE_I2C2 FALSE
+#define STM32_I2C_BUSY_TIMEOUT 50
+#define STM32_I2C_I2C1_IRQ_PRIORITY 3
+#define STM32_I2C_I2C2_IRQ_PRIORITY 3
+#define STM32_I2C_USE_DMA TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY 1
+#define STM32_I2C_I2C2_DMA_PRIORITY 1
+#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1 FALSE
+#define STM32_ICU_USE_TIM2 FALSE
+#define STM32_ICU_USE_TIM3 FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY 3
+#define STM32_ICU_TIM2_IRQ_PRIORITY 3
+#define STM32_ICU_TIM3_IRQ_PRIORITY 3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED FALSE
+#define STM32_PWM_USE_TIM1 FALSE
+#define STM32_PWM_USE_TIM2 FALSE
+#define STM32_PWM_USE_TIM3 TRUE
+#define STM32_PWM_TIM1_IRQ_PRIORITY 3
+#define STM32_PWM_TIM2_IRQ_PRIORITY 3
+#define STM32_PWM_TIM3_IRQ_PRIORITY 3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1 FALSE
+#define STM32_SERIAL_USE_USART2 FALSE
+#define STM32_SERIAL_USART1_PRIORITY 3
+#define STM32_SERIAL_USART2_PRIORITY 3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1 TRUE
+#define STM32_SPI_USE_SPI2 FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY 1
+#define STM32_SPI_SPI2_DMA_PRIORITY 1
+#define STM32_SPI_SPI1_IRQ_PRIORITY 2
+#define STM32_SPI_SPI2_IRQ_PRIORITY 2
+#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
+#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 2
+#define STM32_ST_USE_TIMER 2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1 FALSE
+#define STM32_UART_USE_USART2 FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY 3
+#define STM32_UART_USART2_IRQ_PRIORITY 3
+#define STM32_UART_USART1_DMA_PRIORITY 0
+#define STM32_UART_USART2_DMA_PRIORITY 0
+#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1 TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
+#define STM32_USB_USB1_LP_IRQ_PRIORITY 3
+
+#endif /* _MCUCONF_H_ */
diff --git a/keyboards/dekunukem/duckypad/readme.md b/keyboards/dekunukem/duckypad/readme.md
new file mode 100644
index 0000000000..581f52c899
--- /dev/null
+++ b/keyboards/dekunukem/duckypad/readme.md
@@ -0,0 +1,16 @@
+# 
+
+A 15 Key Macropad w/ RGB and OLED
+
+* Keyboard Maintainer: [M4cs](https://github.com/M4cs) and [half-cambodian-hacker-man](https://github.com/half-cambodian-hacker-man)
+* Hardware Supported: All duckyPad Revisions
+
+Make example for this keyboard (after setting up your build environment):
+
+ make dekunukem/duckypad:default
+
+Flashing example for this keyboard:
+
+ make dekunukem/duckypad:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/dekunukem/duckypad/rules.mk b/keyboards/dekunukem/duckypad/rules.mk
new file mode 100644
index 0000000000..8251ab3646
--- /dev/null
+++ b/keyboards/dekunukem/duckypad/rules.mk
@@ -0,0 +1,24 @@
+# MCU Name
+MCU = STM32F072
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no # Console for debug
+COMMAND_ENABLE = no # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no # Enable Bluetooth
+AUDIO_ENABLE = no # Audio output
+
+WS2812_DRIVER = bitbang
+RGB_MATRIX_ENABLE = WS2812
+
+OLED_DRIVER_ENABLE = yes