1
0
Fork 0
This commit is contained in:
Jack Humbert 2018-05-15 22:30:58 -04:00
parent 6dc215cd67
commit 682555faac
6 changed files with 33 additions and 29 deletions

View file

@ -13,32 +13,34 @@
void i2c_init(void)
{
TWSR = 0; /* no prescaler */
TWBR = (uint8_t)TWBR_val;
//TWBR = 10;
}
uint8_t i2c_start(uint8_t address)
{
// reset TWI control register
TWCR = 0;
// transmit START condition
//TWCR = 0;
// transmit START condition
TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
// wait for end of transmission
while( !(TWCR & (1<<TWINT)) );
// check if the start condition was successfully transmitted
if((TWSR & 0xF8) != TW_START){ return 1; }
if(((TW_STATUS & 0xF8) != TW_START) && ((TW_STATUS & 0xF8) != TW_REP_START)){ return 1; }
// load slave address into data register
TWDR = address;
// start transmission of address
TWCR = (1<<TWINT) | (1<<TWEN);
// wait for end of transmission
while( !(TWCR & (1<<TWINT)) );
// check if the device has acknowledged the READ / WRITE mode
uint8_t twst = TW_STATUS & 0xF8;
if ( (twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK) ) return 1;
return 0;
}
@ -50,17 +52,17 @@ uint8_t i2c_write(uint8_t data)
TWCR = (1<<TWINT) | (1<<TWEN);
// wait for end of transmission
while( !(TWCR & (1<<TWINT)) );
if( (TWSR & 0xF8) != TW_MT_DATA_ACK ){ return 1; }
if( (TW_STATUS & 0xF8) != TW_MT_DATA_ACK ){ return 1; }
return 0;
}
uint8_t i2c_read_ack(void)
{
// start TWI module and acknowledge data after reception
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWEA);
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWEA);
// wait for end of transmission
while( !(TWCR & (1<<TWINT)) );
// return received data from TWDR
@ -69,7 +71,7 @@ uint8_t i2c_read_ack(void)
uint8_t i2c_read_nack(void)
{
// start receiving without acknowledging reception
TWCR = (1<<TWINT) | (1<<TWEN);
// wait for end of transmission
@ -81,29 +83,29 @@ uint8_t i2c_read_nack(void)
uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length)
{
if (i2c_start(address | I2C_WRITE)) return 1;
for (uint16_t i = 0; i < length; i++)
{
if (i2c_write(data[i])) return 1;
}
i2c_stop();
return 0;
}
uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length)
{
if (i2c_start(address | I2C_READ)) return 1;
for (uint16_t i = 0; i < (length-1); i++)
{
data[i] = i2c_read_ack();
}
data[(length-1)] = i2c_read_nack();
i2c_stop();
return 0;
}
@ -146,4 +148,6 @@ void i2c_stop(void)
{
// transmit STOP condition
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
// wait until stop condition is executed and bus released
while(TWCR & (1<<TWSTO));
}

View file

@ -84,7 +84,8 @@ void IS31FL3731_write_register( uint8_t addr, uint8_t reg, uint8_t data )
g_twi_transfer_buffer[1] = data;
//Transmit data until succesful
while(i2c_transmit(addr << 1, g_twi_transfer_buffer,2) != 0);
//while(i2c_transmit(addr << 1, g_twi_transfer_buffer,2) != 0);
i2c_transmit(addr << 1, g_twi_transfer_buffer,2);
}
void IS31FL3731_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
@ -108,7 +109,9 @@ void IS31FL3731_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
}
//Transmit buffer until succesful
while(i2c_transmit(addr << 1, g_twi_transfer_buffer,17) != 0);
//while(i2c_transmit(addr << 1, g_twi_transfer_buffer,17) != 0);
i2c_transmit(addr << 1, g_twi_transfer_buffer,17);
}
}

View file

@ -1,6 +1,4 @@
#include QMK_KEYBOARD_H
#include "i2cmaster.h"
extern inline void ergodox_board_led_on(void);
extern inline void ergodox_right_led_1_on(void);
@ -329,7 +327,7 @@ const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
{{3|(9<<4)}, {24.9*0, 16*2}, 0}, // LED 20
{{4|(6<<4)}, {24.9*3, 16*2}, 0}, // LED 21
{{4|(7<<4)}, {24.9*3, 16*2}, 0}, // LED 22
{{4|(7<<4)}, {24.9*2, 16*2}, 0}, // LED 22
{{4|(8<<4)}, {24.9*1, 16*2}, 0}, // LED 23
{{4|(9<<4)}, {24.9*0, 16*2}, 0}, // LED 24
};

View file

@ -4,7 +4,7 @@
#include "quantum.h"
#include <stdint.h>
#include <stdbool.h>
#include "i2cmaster.h"
#include "i2c_master.h"
#include <util/delay.h>
#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))

View file

@ -34,7 +34,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "util.h"
#include "matrix.h"
#include QMK_KEYBOARD_H
#include "i2cmaster.h"
#ifdef DEBUG_MATRIX_SCAN_RATE
#include "timer.h"
#endif
@ -297,7 +296,7 @@ static matrix_row_t read_cols(uint8_t row)
mcp23018_status = i2c_start(I2C_ADDR_WRITE); if (mcp23018_status) goto out;
mcp23018_status = i2c_write(GPIOB); if (mcp23018_status) goto out;
mcp23018_status = i2c_start(I2C_ADDR_READ); if (mcp23018_status) goto out;
data = i2c_readNak();
data = i2c_read_nack();
data = ~data;
out:
i2c_stop();

View file

@ -15,8 +15,8 @@
#----------------------------------------------------------------------------
# # project specific files
SRC = twimaster.c \
matrix.c
SRC = matrix.c \
i2c_master.c
# MCU name
MCU = atmega32u4