1
0
Fork 0

Merge pull request #1085 from priyadi/promethium

Promethium keyboard layout update
This commit is contained in:
Jack Humbert 2017-02-11 11:49:00 -05:00 committed by GitHub
commit 6bb479ea45
8 changed files with 797 additions and 310 deletions

View file

@ -43,28 +43,97 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROW_PINS { D7, C6, D0, D1, F5, F4, F1, F0 }
#define UNUSED_PINS
/* COL2ROW or ROW2COL */
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define DIODE_DIRECTION COL2ROW
/* define if matrix has ghost */
// #define BACKLIGHT_PIN B7
// #define BACKLIGHT_BREATHING
// #define BACKLIGHT_LEVELS 3
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
#define BACKLIGHT_LEVELS 3
/* Set 0 if debouncing isn't needed */
#define DEBOUNCING_DELAY 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
// #define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
// #define LOCKING_RESYNC_ENABLE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT) | MOD_BIT(KC_LCTRL) | MOD_BIT(KC_RCTRL)) \
)
/* control how magic key switches layers */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
/* override magic key keymap */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
//#define MAGIC_KEY_HELP1 H
//#define MAGIC_KEY_HELP2 SLASH
//#define MAGIC_KEY_DEBUG D
//#define MAGIC_KEY_DEBUG_MATRIX X
//#define MAGIC_KEY_DEBUG_KBD K
//#define MAGIC_KEY_DEBUG_MOUSE M
//#define MAGIC_KEY_VERSION V
//#define MAGIC_KEY_STATUS S
//#define MAGIC_KEY_CONSOLE C
//#define MAGIC_KEY_LAYER0_ALT1 ESC
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
//#define MAGIC_KEY_LAYER0 0
//#define MAGIC_KEY_LAYER1 1
//#define MAGIC_KEY_LAYER2 2
//#define MAGIC_KEY_LAYER3 3
//#define MAGIC_KEY_LAYER4 4
//#define MAGIC_KEY_LAYER5 5
//#define MAGIC_KEY_LAYER6 6
//#define MAGIC_KEY_LAYER7 7
//#define MAGIC_KEY_LAYER8 8
//#define MAGIC_KEY_LAYER9 9
//#define MAGIC_KEY_BOOTLOADER PAUSE
//#define MAGIC_KEY_LOCK CAPS
//#define MAGIC_KEY_EEPROM E
//#define MAGIC_KEY_NKRO N
//#define MAGIC_KEY_SLEEP_LED Z
/*
* Feature disable options
* These options are also useful to firmware size reduction.

View file

@ -14,4 +14,11 @@
#define RGB_DI_PIN B5
#define RGBSPS_NUM 57
#define LAYOUT_DVORAK
#define LAYOUT_COLEMAK
#define LAYOUT_NORMAN
#define LAYOUT_WORKMAN
#define DOUBLESPACE_LAYER_ENABLE
#endif

File diff suppressed because it is too large Load diff

View file

@ -1,6 +1,38 @@
#include "promethium.h"
#include "analog.h"
#include "timer.h"
#include "matrix.h"
// cubic fit {3.3, 0}, {3.5, 2.9}, {3.6, 5}, {3.7, 8.6}, {3.8, 36}, {3.9, 62}, {4.0, 73}, {4.05, 83}, {4.1, 89}, {4.15, 94}, {4.2, 100}
uint8_t battery_level(void) {
float voltage = analogRead(BATTERY_PIN) * 2 * 3.3 / 1024;
if (voltage < MIN_VOLTAGE) return 0;
if (voltage > MAX_VOLTAGE) return 255;
return (voltage - MIN_VOLTAGE) / (MAX_VOLTAGE - MIN_VOLTAGE) * 255;
}
__attribute__ ((weak))
void battery_poll(uint8_t level) {
}
void matrix_init_kb(void) {
matrix_init_user();
}
void matrix_scan_kb(void) {
static uint16_t counter = BATTERY_POLL;
counter++;
if (counter > BATTERY_POLL) {
counter = 0;
battery_poll(battery_level());
}
matrix_scan_user();
}
void led_set_kb(uint8_t usb_led) {
led_set_user(usb_led);
}

View file

@ -4,6 +4,11 @@
#include "quantum.h"
#define PS2_INIT_DELAY 2000
#define UNICODE_TYPE_DELAY 0
#define BATTERY_PIN 9
#define BATTERY_POLL 30000
#define MAX_VOLTAGE 4.2
#define MIN_VOLTAGE 3.2
#define KEYMAP( \
k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \
@ -22,6 +27,8 @@
{k47, k48, k49, k4a, k4b, k4c} \
}
enum led_sequence {
LED_IND_BLUETOOTH,
LED_IND_USB,
@ -98,4 +105,4 @@ enum led_sequence {
#endif
void battery_poll(uint8_t level);

View file

@ -22,3 +22,52 @@ void rgbsps_turnoff(void) {
void rgbsps_send(void) {
ws2812_setleds(led, RGBSPS_NUM);
}
void rgbsps_sethsv(uint8_t index, uint16_t hue, uint8_t sat, uint8_t val) {
uint8_t r = 0, g = 0, b = 0, base, color;
if (sat == 0) { // Acromatic color (gray). Hue doesn't mind.
r = val;
g = val;
b = val;
} else {
base = ((255 - sat) * val) >> 8;
color = (val - base) * (hue % 60) / 60;
switch (hue / 60) {
case 0:
r = val;
g = base + color;
b = base;
break;
case 1:
r = val - color;
g = val;
b = base;
break;
case 2:
r = base;
g = val;
b = base + color;
break;
case 3:
r = base;
g = val - color;
b = val;
break;
case 4:
r = base + color;
g = base;
b = val;
break;
case 5:
r = val;
g = base;
b = val - color;
break;
}
}
rgbsps_set(index, r, g, b);
}

View file

@ -2,3 +2,4 @@ void rgbsps_set(uint8_t index, uint8_t r, uint8_t g, uint8_t b);
void rgbsps_setall(uint8_t r, uint8_t g, uint8_t b);
void rgbsps_turnoff(void);
void rgbsps_send(void);
void rgbsps_sethsv(uint8_t index, uint16_t hue, uint8_t sat, uint8_t val);

View file

@ -73,3 +73,4 @@ SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
SRC += $(QUANTUM_DIR)/light_ws2812.c
SRC += rgbsps.c
SRC += $(QUANTUM_DIR)/analog.c