1
0
Fork 0

Remove keyboard level ws2812 spi drivers (#7694)

This commit is contained in:
Joel Challis 2020-04-06 21:31:34 +01:00 committed by GitHub
parent 7901006753
commit 6c8e205fc0
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
24 changed files with 31 additions and 126 deletions

View file

@ -49,11 +49,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define LOCKING_RESYNC_ENABLE
#define RGBLIGHT_ANIMATIONS
#define WS2812_LED_N 14
#define RGBLED_NUM WS2812_LED_N
#define PORT_WS2812 GPIOB
#define PIN_WS2812 15
#define RGB_DI_PIN B15
#define RGBLED_NUM 14
#define WS2812_SPI SPID2
// Backlight config starts after VIA's EEPROM usage,

View file

@ -21,6 +21,7 @@ NKRO_ENABLE = yes # USB Nkey Rollover
CUSTOM_MATRIX = no # Custom matrix file
# BACKLIGHT_ENABLE = yes # This is broken on 072 for some reason
RGBLIGHT_ENABLE = yes
WS2812_DRIVER = spi
LAYOUTS = 60_ansi 60_tsangan_hhkb

View file

@ -14,20 +14,7 @@
#endif
void matrix_init_kb(void){
/* MOSI pin*/
palSetPadMode(GPIOB, 15, PAL_MODE_STM32_ALTERNATE_PUSHPULL);
LED_ON();
wait_ms(500);
LED_OFF();
#ifdef RGBLIGHT_ENABLE
leds_init();
#endif
}
void matrix_scan_kb(void)
{
#ifdef RGBLIGHT_ENABLE
rgblight_task();
#endif
}

View file

@ -1,20 +0,0 @@
#pragma once
#include "hal.h"
#include "color.h"
void set_leds_color_rgb(LED_TYPE color);
void set_led_color_rgb(LED_TYPE color, int pos);
void leds_init(void);
// This is what users will use to interface with this
void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds);
void ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds);
void WS2812_init(void);
void WS2812_set_color( uint8_t index, uint8_t red, uint8_t green, uint8_t blue );
void WS2812_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
void WS2812_send_colors(void);

View file

@ -49,11 +49,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define LOCKING_RESYNC_ENABLE
#define RGBLIGHT_ANIMATIONS
#define WS2812_LED_N 14
#define RGBLED_NUM WS2812_LED_N
#define PORT_WS2812 GPIOB
#define PIN_WS2812 15
#define RGB_DI_PIN B15
#define RGBLED_NUM 14
#define WS2812_SPI SPID2
// Backlight config starts after VIA's EEPROM usage,

View file

@ -21,6 +21,7 @@ NKRO_ENABLE = yes # USB Nkey Rollover
CUSTOM_MATRIX = no # Custom matrix file
# BACKLIGHT_ENABLE = yes # This is broken on 072 for some reason
RGBLIGHT_ENABLE = yes
WS2812_DRIVER = spi
LAYOUTS = 60_ansi 60_tsangan_hhkb

View file

@ -52,14 +52,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define LOCKING_RESYNC_ENABLE
#define RGBLIGHT_ANIMATIONS
#define WS2812_LED_N 9
#define RGBLED_NUM WS2812_LED_N
#define PORT_WS2812 GPIOB
#define PIN_WS2812 15
#define RGB_DI_PIN B15
#define RGBLED_NUM 9
#define WS2812_SPI SPID2
/*
* Feature disable options
* These options are also useful to firmware size reduction.

View file

@ -22,6 +22,7 @@ SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = yes
RGBLIGHT_ENABLE = yes
WS2812_DRIVER = spi
LAYOUTS = ortho_4x12

View file

@ -52,14 +52,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define LOCKING_RESYNC_ENABLE
#define RGBLIGHT_ANIMATIONS
#define WS2812_LED_N 16
#define RGBLED_NUM WS2812_LED_N
#define PORT_WS2812 GPIOB
#define PIN_WS2812 15
#define RGB_DI_PIN B15
#define RGBLED_NUM 16
#define WS2812_SPI SPID2
/*
* Feature disable options
* These options are also useful to firmware size reduction.

View file

@ -22,6 +22,7 @@ SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = yes
RGBLIGHT_ENABLE = yes
WS2812_DRIVER = spi
LAYOUTS = ortho_5x12

View file

@ -55,14 +55,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define LOCKING_RESYNC_ENABLE
#define RGBLIGHT_ANIMATIONS
#define WS2812_LED_N 16
#define RGBLED_NUM WS2812_LED_N
#define PORT_WS2812 GPIOB
#define PIN_WS2812 15
#define RGB_DI_PIN B15
#define RGBLED_NUM 16
#define WS2812_SPI SPID2
/*
* Feature disable options
* These options are also useful to firmware size reduction.

View file

@ -22,6 +22,7 @@ SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = yes
RGBLIGHT_ENABLE = yes
WS2812_DRIVER = spi
ENCODER_ENABLE = yes
LAYOUTS = ortho_5x15

View file

@ -52,14 +52,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define LOCKING_RESYNC_ENABLE
#define RGBLIGHT_ANIMATIONS
#define WS2812_LED_N 9
#define RGBLED_NUM WS2812_LED_N
#define PORT_WS2812 GPIOB
#define PIN_WS2812 15
#define RGB_DI_PIN B15
#define RGBLED_NUM 9
#define WS2812_SPI SPID2
/*
* Feature disable options
* These options are also useful to firmware size reduction.

View file

@ -22,6 +22,7 @@ SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = yes
RGBLIGHT_ENABLE = yes
WS2812_DRIVER = spi
LAYOUTS = 60_ansi

View file

@ -52,14 +52,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define LOCKING_RESYNC_ENABLE
#define RGBLIGHT_ANIMATIONS
#define WS2812_LED_N 20
#define RGBLED_NUM WS2812_LED_N
#define PORT_WS2812 GPIOB
#define PIN_WS2812 15
#define RGB_DI_PIN B15
#define RGBLED_NUM 20
#define WS2812_SPI SPID2
/*
* Feature disable options
* These options are also useful to firmware size reduction.

View file

@ -22,7 +22,7 @@ SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = yes
RGBLIGHT_ENABLE = yes
WS2812_DRIVER = spi
# Enter lower-power sleep mode when on the ChibiOS idle thread
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

View file

@ -49,11 +49,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define LOCKING_RESYNC_ENABLE
#define RGBLIGHT_ANIMATIONS
#define WS2812_LED_N 20
#define RGBLED_NUM WS2812_LED_N
#define PORT_WS2812 GPIOB
#define PIN_WS2812 15
#define RGB_DI_PIN B15
#define RGBLED_NUM 20
#define WS2812_SPI SPID2
// Backlight config starts after VIA's EEPROM usage,

View file

@ -21,7 +21,7 @@ NKRO_ENABLE = yes # USB Nkey Rollover
CUSTOM_MATRIX = no # Custom matrix file
# BACKLIGHT_ENABLE = yes # This is broken on 072 for some reason
RGBLIGHT_ENABLE = yes
WS2812_DRIVER = spi
# Enter lower-power sleep mode when on the ChibiOS idle thread
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

View file

@ -5,8 +5,6 @@
#include "util.h"
#include "quantum.h"
#include "ws2812.h"
#include "raw_hid.h"
#include "dynamic_keymap.h"
#include "tmk_core/common/eeprom.h"
@ -58,25 +56,11 @@ void matrix_init_kb(void){
via_init_kb();
via_eeprom_set_valid(true);
#endif // VIA_ENABLE
/* MOSI pin*/
#ifdef RGBLIGHT_ENABLE
palSetPadMode(PORT_WS2812, PIN_WS2812, PAL_MODE_ALTERNATE(0));
wait_ms(500);
leds_init();
#endif
backlight_init_ports();
matrix_init_board();
}
void matrix_scan_kb(void)
{
#ifdef RGBLIGHT_ENABLE
rgblight_task();
#endif
matrix_scan_user();
}
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case BL_INC:

View file

@ -1,19 +0,0 @@
#pragma once
#include "hal.h"
#include "color.h"
void set_leds_color_rgb(LED_TYPE color);
void set_led_color_rgb(LED_TYPE color, int pos);
void leds_init(void);
// This is what users will use to interface with this
void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds);
void ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds);
void WS2812_init(void);
void WS2812_set_color( uint8_t index, uint8_t red, uint8_t green, uint8_t blue );
void WS2812_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
void WS2812_send_colors(void);

View file

@ -49,12 +49,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define LOCKING_RESYNC_ENABLE
#define RGBLIGHT_ANIMATIONS
#define WS2812_LED_N 22
#define RGBLED_NUM WS2812_LED_N
#define PORT_WS2812 GPIOB
#define PIN_WS2812 15
#define RGB_DI_PIN B15
#define RGBLED_NUM 22
#define WS2812_SPI SPID2
#define WS2812_SPI_MOSI_PAL_MODE 0
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.

View file

@ -21,7 +21,7 @@ NKRO_ENABLE = yes # USB Nkey Rollover
CUSTOM_MATRIX = no # Custom matrix file
# BACKLIGHT_ENABLE = yes # This is broken on 072 right now
RGBLIGHT_ENABLE = yes
WS2812_DRIVER = spi
# Enter lower-power sleep mode when on the ChibiOS idle thread
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

View file

@ -49,11 +49,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define LOCKING_RESYNC_ENABLE
#define RGBLIGHT_ANIMATIONS
#define WS2812_LED_N 14
#define RGBLED_NUM WS2812_LED_N
#define PORT_WS2812 GPIOB
#define PIN_WS2812 15
#define RGB_DI_PIN B15
#define RGBLED_NUM 14
#define WS2812_SPI SPID2
// Backlight config starts after VIA's EEPROM usage,

View file

@ -21,6 +21,7 @@ NKRO_ENABLE = yes # USB Nkey Rollover
CUSTOM_MATRIX = no # Custom matrix file
# BACKLIGHT_ENABLE = yes # This is broken on 072 for some reason
RGBLIGHT_ENABLE = yes
WS2812_DRIVER = spi
# RAW_ENABLE = yes
# DYNAMIC_KEYMAP_ENABLE = yes