Nulo/qmk_firmware
1
0
Fork 0
Code Releases Activity

Merge branch 'master' of https://github.com/jackhumbert/qmk_firmware

Browse source
This commit is contained in:
cbbrowne 2016-08-08 13:50:01 -04:00
commit 6ce0195e24
7 changed files with 273 additions and 208 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

71
keyboards/clueboard2/Makefile
View file

@ -1,71 +0,0 @@
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
CONSOLE_ENABLE ?= yes # Console for debug(+400)
COMMAND_ENABLE ?= yes # Commands for debug and configuration
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
RGBLIGHT_ENABLE ?= no # Enable keyboard underlight functionality (+4870)
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150)
MIDI_ENABLE ?= no # MIDI controls
AUDIO_ENABLE ?= no
UNICODE_ENABLE ?= no # Unicode
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
ifndef QUANTUM_DIR
include ../../Makefile
endif

63
keyboards/clueboard2/clueboard2.c
View file

@ -1,63 +0,0 @@
#include "clueboard2.h"
void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
matrix_init_user();
led_init_ports();
// JTAG disable for PORT F. write JTD bit twice within four cycles.
MCUCR |= (1<<JTD);
MCUCR |= (1<<JTD);
};
void led_init_ports() {
// * Set our LED pins as output
DDRB |= (1<<4);
}
void led_set_kb(uint8_t usb_led) {
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
// Turn capslock on
PORTB |= (1<<4);
} else {
// Turn capslock off
PORTB &= ~(1<<4);
}
}
/* Clueboard 2.0 LED locations:
*
* Capslock: B4, pull high to turn on
* LCtrl: Shared with Capslock, DO NOT INSTALL LED'S IN BOTH
* Page Up: B7, pull high to turn on
* Escape: D6, pull high to turn on
* Arrows: D4, pull high to turn on
*/
void backlight_init_ports(void) {
print("init_backlight_pin()\n");
// Set our LED pins as output
DDRD |= (1<<6); // Esc
DDRB |= (1<<7); // Page Up
DDRD |= (1<<4); // Arrows
// Set our LED pins low
PORTD &= ~(1<<6); // Esc
PORTB &= ~(1<<7); // Page Up
PORTD &= ~(1<<4); // Arrows
}
void backlight_set(uint8_t level) {
if ( level == 0 ) {
// Turn off light
PORTD |= (1<<6); // Esc
PORTB |= (1<<7); // Page Up
PORTD |= (1<<4); // Arrows
} else {
// Turn on light
PORTD &= ~(1<<6); // Esc
PORTB &= ~(1<<7); // Page Up
PORTD &= ~(1<<4); // Arrows
}
}

161
keyboards/planck/keymaps/jeebak/keymap.c
View file

@ -21,9 +21,10 @@ extern keymap_config_t keymap_config;
#define _RAISE 4
#define _PLOVER 5
#define _TOUCHCURSOR 6
#define _MOUSE 7
#define _MOUSECURSOR 7
#define _ADJUST 16
// Keycodes
enum planck_keycodes {
QWERTY = SAFE_RANGE,
COLEMAK,
@ -35,24 +36,60 @@ enum planck_keycodes {
EXT_PLV
};
enum macro_keycodes {
KC_ALT_TAB,
KC_CMD_TAB,
KC_CTL_TAB,
KC_CMD_SLSH,
KC_AG_FIND,
KC_AG_AGAIN,
KC_AG_UNDO,
KC_AG_CUT,
KC_AG_COPY,
KC_AG_PASTE,
KC_AG_DESK_L,
KC_AG_DESK_R,
KC_AG_TAB_C,
KC_AG_TAB_N,
KC_AG_TAB_R,
};
// Fillers to make layering more clear
#define _______ KC_TRNS
#define XXXXXXX KC_NO
// Custom macros
#define CTL_ESC CTL_T(KC_ESC) // Tap for Esc, hold for Ctrl
#define LT_TC LT(_TOUCHCURSOR, KC_SPC) // L-ayer T-ap T-ouch C-ursor
// ^-- Requires KC_TRNS / _______ for the trigger key in the destination layer
#define SFT_ENT SFT_T(KC_ENT) // Tap for Enter, hold for Shift
#define LT_ML LT(_MOUSE, KC_A) // L-ayer T-ap M-ouse C-ursor (on A)
#define HPR_TAB ALL_T(KC_TAB) // Tap for Tab, hold for Hyper
#define GUI_SEM GUI_T(KC_SCLN) // Tap for Semicolon, hold for GUI
#define ALT_QUO ALT_T(KC_QUOT) // Tap for Quote, hold for Alt
// Requires KC_TRNS/_______ for the trigger key in the destination layer
#define LT_TC LT(_TOUCHCURSOR, KC_SPC) // L-ayer T-ap T-ouch C-ursor
#define LT_MC(kc) LT(_MOUSECURSOR, kc) // L-ayer T-ap M-ouse C-ursor
#define ALT_TAB M(KC_ALT_TAB) // Macro for Alt-Tab
#define CMD_TAB M(KC_CMD_TAB) // Macro for Cmd-Tab
#define CTL_TAB M(KC_CTL_TAB) // Macro for Ctl-Tab
#define CMD_SLSH M(KC_CMD_SLSH) // Macro for Cmd-Slash (personal shortcut to toggle iTerm2 visibility)
#define AG_FIND M(KC_AG_FIND) // Macros for Cmd-[x] vs Ctrl-[x] based on current AG_NORM or AG_SWAP settings
#define AG_AGAIN M(KC_AG_AGAIN)
#define AG_UNDO M(KC_AG_UNDO)
#define AG_CUT M(KC_AG_CUT)
#define AG_COPY M(KC_AG_COPY)
#define AG_PASTE M(KC_AG_PASTE)
#define AG_D_L M(KC_AG_DESK_L) // For Virtual Desktop Switching: Left, and
#define AG_D_R M(KC_AG_DESK_R) // Right
#define AG_T_C M(KC_AG_TAB_C) // For Chrome, etc. Tab Close,
#define AG_T_N M(KC_AG_TAB_N) // Tab New, and
#define AG_T_R M(KC_AG_TAB_R) // Tab Reopen Closed
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Qwerty
* ,-----------------------------------------------------------------------------------------.
* | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp |
* | Hyper/Tab| Q | W | E | R | T | Y | U | I | O | P | Bksp |
* |----------+------+------+------+------+-------------+------+------+------+------+--------|
* | Ctrl/Esc | ML/A | S | D | F | G | H | J | K | L | ; | " |
* | Ctrl/Esc | A | S | MC/D | F | G | H | J | K | L |GUI/; | Alt/" |
* |----------+------+------+------+------+------|------+------+------+------+------+--------|
* | Shift | Z | X | C | V | B | N | M | , | . | / |Sft/Ent |
* |----------+------+------+------+------+------+------+------+------+------+------+--------|
@ -60,17 +97,17 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* `-----------------------------------------------------------------------------------------'
*/
[_QWERTY] = {
{KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
{CTL_ESC, LT_ML, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT},
{HPR_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
{CTL_ESC, KC_A, KC_S, LT_MC(KC_D),KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, GUI_SEM, ALT_QUO},
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT},
{KC_PSCR, KC_RGUI, KC_LALT, KC_LGUI, LOWER, LT_TC, LT_TC, RAISE, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
},
/* Colemak
* ,-----------------------------------------------------------------------------------------.
* | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp |
* | Hyper/Tab| Q | W | F | P | G | J | L | U | Y | ; | Bksp |
* |----------+------+------+------+------+-------------+------+------+------+------+--------|
* | Ctrl/Esc | ML/A | R | S | T | D | H | N | E | I | O | " |
* | Ctrl/Esc | A | R | MC/S | T | D | H | N | E | I | O | " |
* |----------+------+------+------+------+------|------+------+------+------+------+--------|
* | Shift | Z | X | C | V | B | K | M | , | . | / |Sft/Ent |
* |----------+------+------+------+------+------+------+------+------+------+------+--------|
@ -78,17 +115,17 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* `-----------------------------------------------------------------------------------------'
*/
[_COLEMAK] = {
{KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC},
{CTL_ESC, LT_ML, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT},
{HPR_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC},
{CTL_ESC, KC_A, KC_R, LT_MC(KC_S),KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT},
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT},
{KC_PSCR, KC_RGUI, KC_LALT, KC_LGUI, LOWER, LT_TC, LT_TC, RAISE, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
},
/* Dvorak
* ,-----------------------------------------------------------------------------------------.
* | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp |
* | Hyper/Tab| " | , | . | P | Y | F | G | C | R | L | Bksp |
* |----------+------+------+------+------+-------------+------+------+------+------+--------|
* | Ctrl/Esc | ML/A | O | E | U | I | D | H | T | N | S | / |
* | Ctrl/Esc | A | O | MC/E | U | I | D | H | T | N | S | / |
* |----------+------+------+------+------+------|------+------+------+------+------+--------|
* | Shift | ; | Q | J | K | X | B | M | W | V | Z |Sft/Ent |
* |----------+------+------+------+------+------+------+------+------+------+------+--------|
@ -96,8 +133,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* `-----------------------------------------------------------------------------------------'
*/
[_DVORAK] = {
{KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC},
{CTL_ESC, LT_ML, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH},
{HPR_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC},
{CTL_ESC, KC_A, KC_O, LT_MC(KC_E),KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH},
{KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_ENT},
{KC_PSCR, KC_RGUI, KC_LALT, KC_LGUI, LOWER, LT_TC, LT_TC, RAISE, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
},
@ -124,27 +161,27 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* ,-----------------------------------------------------------------------------------.
* | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | $ | 4 | 5 | 6 | . | + | * | 4 | 5 | 6 | - | | |
* | $ | 4 | 5 | 6 | . | + | . | 4 | 5 | 6 | * | | |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | = | 7 | 8 | 9 | 0 | - | / | 1 | 2 | 3 | . | \ |
* | = | 7 | 8 | 9 | 0 | - | . | 1 | 2 | 3 | / | \ |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* |Brite | | | | | | | Prev | Stop | Slct | Mute |
* `-----------------------------------------------------------------------------------'
*/
[_RAISE] = {
{KC_0, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC},
{KC_DLR, KC_4, KC_5, KC_6, KC_DOT, KC_PLUS, KC_ASTR, KC_4, KC_5, KC_6, KC_MINS, KC_PIPE},
{KC_EQL, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_SLSH, KC_1, KC_2, KC_3, KC_DOT, KC_BSLS},
{KC_DLR, KC_4, KC_5, KC_6, KC_DOT, KC_PLUS, KC_DOT, KC_4, KC_5, KC_6, KC_ASTR, KC_PIPE},
{KC_EQL, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_DOT, KC_1, KC_2, KC_3, KC_SLSH, KC_BSLS},
{BACKLIT, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MSTP, KC_MSEL, KC_MUTE}
},
/* TouchCursor layer (http://martin-stone.github.io/touchcursor/) plus personal customizations
* ,-----------------------------------------------------------------------------------.
* | | | |Shift | GUI | ~ |Insert| Home | Up | End | Bksp | |
* |AltTab|CmdTab|CtlTab| GUI |Shift | ~ |Insert| Home | Up | End | Bksp | |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | Alt |Space | | Find |Again | PgUp | Left | Down |Right | | |
* | | Alt |Space |Tab_C | Find |Again | PgUp | Left | Down |Right |Desk_L|Desk_R|
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | Undo | Cut | Copy |Paste | ` | PgDn | Del | | | | |
* | | Undo | Cut | Copy |Paste | ` | PgDn | Del |Tab_N |Tab_R |iTerm2| |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | |
* `-----------------------------------------------------------------------------------'
@ -154,28 +191,28 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
*/
[_TOUCHCURSOR] = {
{_______, _______, _______, KC_LSFT, KC_LGUI, KC_TILD, KC_INS, KC_HOME, KC_UP, KC_END, KC_BSPC, _______},
{_______, KC_LALT, KC_SPC, _______, KC_FIND,KC_AGAIN, KC_PGUP, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______},
{_______, KC_UNDO, KC_CUT, KC_COPY, KC_PASTE,KC_GRV, KC_PGDN, KC_DEL, _______, _______, _______, _______},
{ALT_TAB, CMD_TAB, CTL_TAB, KC_LGUI, KC_LSFT, KC_TILD, KC_INS, KC_HOME, KC_UP, KC_END, KC_BSPC, _______},
{_______, KC_LALT, KC_SPC, AG_T_C, AG_FIND,AG_AGAIN, KC_PGUP, KC_LEFT, KC_DOWN, KC_RGHT, AG_D_L, AG_D_R },
{_______, AG_UNDO, AG_CUT, AG_COPY, AG_PASTE,KC_GRV, KC_PGDN, KC_DEL, AG_T_N, AG_T_R, CMD_SLSH,_______},
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
},
/* Mouse Layer
* ,-----------------------------------------------------------------------------------.
* | | |ACCL0 |ACCL1 |ACCL2 |ACCL2 | |WHL_L | Up |WHL_R | BTN2 | |
* | | |ACCL0 | | | | |WHL_L | Up |WHL_R | BTN2 | |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | | | BTN3 | BTN1 | BTN4 |WHL_Up| Left | Down |Right | | |
* | |ACCL2 | BTN2 | | BTN1 |ACCL1 |WHL_Up| Left | Down |Right | BTN4 | BTN5 |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | | | | BTN2 | BTN5 |WHL_Dn| BTN1 | | | | |
* | | | | | BTN3 | |WHL_Dn| BTN1 | | | BTN3 | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | |
* `-----------------------------------------------------------------------------------'
*/
[_MOUSE] = {
{_______, _______, KC_ACL0, KC_ACL1, KC_ACL2, KC_ACL2, _______, KC_WH_L, KC_MS_U, KC_WH_R, KC_BTN2, _______},
{_______, _______, _______, KC_BTN3, KC_BTN1, KC_BTN4, KC_WH_U, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______},
{_______, _______, _______, _______, KC_BTN2, KC_BTN5, KC_WH_D, KC_BTN1, _______, _______, _______, _______},
[_MOUSECURSOR] = {
{_______, _______, KC_ACL0, _______, _______, _______, _______, KC_WH_L, KC_MS_U, KC_WH_R, KC_BTN2, _______},
{_______, KC_ACL2, KC_BTN2, _______, KC_BTN1, KC_ACL1, KC_WH_U, KC_MS_L, KC_MS_D, KC_MS_R, KC_BTN4, KC_BTN5},
{_______, _______, _______, _______, KC_BTN3, _______, KC_WH_D, KC_BTN1, _______, _______, KC_BTN3, _______},
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
},
@ -330,6 +367,64 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
return true;
}
/*
* Macro definition
*/
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
if (!eeconfig_is_enabled()) {
eeconfig_init();
}
bool use_cmd = true; // Use, for example, Cmd-Tab, Cmd-C, Cmd-V, etc.
// Compare to MAGIC_SWAP_ALT_GUI and MAGIC_UNSWAP_ALT_GUI configs, set in:
// quantum/quantum.c
if(keymap_config.swap_lalt_lgui == 1 && keymap_config.swap_ralt_rgui == 1) {
use_cmd = false; // ... or, Alt-Tab, Ctrl-C, Ctrl-V, etc.
}
switch (id) {
case KC_ALT_TAB:
if(use_cmd) { return (record->event.pressed ? MACRO( D(LALT), D(TAB), END ) : MACRO( U(TAB), END )); }
else { return (record->event.pressed ? MACRO( D(LGUI), D(TAB), END ) : MACRO( U(TAB), END )); }
case KC_CMD_TAB:
if(use_cmd) { return (record->event.pressed ? MACRO( D(LGUI), D(TAB), END ) : MACRO( U(TAB), END )); }
else { return (record->event.pressed ? MACRO( D(LALT), D(TAB), END ) : MACRO( U(TAB), END )); }
case KC_CTL_TAB:
return (record->event.pressed ? MACRO( D(LCTRL), D(TAB), END ) : MACRO( U(TAB), END ));
case KC_CMD_SLSH:
return (record->event.pressed ? MACRO( D(LGUI), D(SLSH),END ) : MACRO( U(SLSH),END ));
case KC_AG_FIND:
return use_cmd ? MACRODOWN( D(LGUI), T(F), END ) : MACRODOWN( D(LCTRL), T(F), END );
case KC_AG_AGAIN:
return use_cmd ? MACRODOWN( D(LGUI), T(G), END ) : MACRODOWN( D(LCTRL), T(G), END );
case KC_AG_UNDO:
return use_cmd ? MACRODOWN( D(LGUI), T(Z), END ) : MACRODOWN( D(LCTRL), T(Z), END );
case KC_AG_CUT:
return use_cmd ? MACRODOWN( D(LGUI), T(X), END ) : MACRODOWN( D(LCTRL), T(X), END );
case KC_AG_COPY:
return use_cmd ? MACRODOWN( D(LGUI), T(C), END ) : MACRODOWN( D(LCTRL), T(C), END );
case KC_AG_PASTE:
return use_cmd ? MACRODOWN( D(LGUI), T(V), END ) : MACRODOWN( D(LCTRL), T(V), END );
case KC_AG_DESK_L:
return use_cmd ? MACRODOWN( D(LGUI), D(LCTRL), T(SCLN), END ) : MACRODOWN( D(LALT), D(LCTRL), T(SCLN), END );
case KC_AG_DESK_R:
return use_cmd ? MACRODOWN( D(LGUI), D(LCTRL), T(QUOT), END ) : MACRODOWN( D(LALT), D(LCTRL), T(QUOT), END );
case KC_AG_TAB_C:
return use_cmd ? MACRODOWN( D(LGUI), T(W), END ) : MACRODOWN( D(LCTRL), T(W), END );
case KC_AG_TAB_N:
return use_cmd ? MACRODOWN( D(LGUI), T(T), END ) : MACRODOWN( D(LCTRL), T(T), END );
case KC_AG_TAB_R:
return use_cmd ? MACRODOWN( D(LGUI), D(LSHIFT), T(T), END ) : MACRODOWN( D(LCTRL), D(LSHIFT), T(T), END );
}
return MACRO_NONE;
}
void matrix_init_user(void) {
#ifdef AUDIO_ENABLE
startup_user();

74
keyboards/planck/keymaps/jeebak/readme.md
View file

@ -7,23 +7,34 @@ the exact changes. The diagrams in this README shows the highlights of the
changes from the default mappings.
I also decided to change all calls to `persistant_default_layer_set()` to
`update_tri_layer()` since this is my personal perference.
`default_layer_set()` since this is my personal perference.
## Macros
```
#define ALT_TAB M(KC_ALT_TAB)
```
## Base Layers (Qwerty/Colemak/Dvorak)
These base layers are mostly the same as the default mappings. The interesting
changes are shown below. The `Ctrl/Esc`, mapped using `CTL_T(KC_ESC)` will emit
an `Escape` when tapped, and act as a `Control` key when held. A `TODO` item is
to see if it can also act as a `CapsLock` when double-tapped. The right shift
key acts as `Enter` when tapped, and as a `Shift` key when held. The arrow
keys, which have been moved to the
changes are shown below.
- The `Ctrl/Esc`, will emit an `Escape` when tapped, and act as a `Control` key when held,
- `GUI/;` as `;` and `GUI`,
- `Alt/"` as `"` and `Alt`,
- `Sft/Ent` as `Enter` and `Shift`, and
- `Hyper/Tab` as `Tab` and `Hyper`
A `TODO` item is to see if it can also act as a `CapsLock` when double-tapped.
The arrow keys, which have been moved to the
[TouchCursor](http://martin-stone.github.io/touchcursor/) layer, have been
replaced with the Media keys as shown. The `ML/A` key activates the Mouse layer
when held, and emits an `A` when tapped.
replaced with the Media keys as shown. The `MC/kc` key activates the
`MouseCursor` layer when held, and emits the corresponding `kc` for its layer,
when tapped.
```
,-----------------------------------------------------------------------------------------.
| | | | | | | | | | | | |
| Hyper/Tab| | | | | | | | | | | |
|----------+------+------+------+------+-------------+------+------+------+------+--------|
| Ctrl/Esc | ML/A | | | | | | | | | | |
| Ctrl/Esc | | |MC/kc | | | | | | |GUI/; | Alt/" |
|----------+------+------+------+------+------|------+------+------+------+------+--------|
| | | | | | | | | | | |Sft/Ent |
|----------+------+------+------+------+------+------+------+------+------+------+--------|
@ -56,9 +67,9 @@ keys at the far left are for quick access to beginning and end of line in vim.
,-----------------------------------------------------------------------------------.
| 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp |
|------+------+------+------+------+-------------+------+------+------+------+------|
| $ | 4 | 5 | 6 | . | + | * | 4 | 5 | 6 | - | | |
| $ | 4 | 5 | 6 | . | + | . | 4 | 5 | 6 | * | | |
|------+------+------+------+------+------|------+------+------+------+------+------|
| = | 7 | 8 | 9 | 0 | - | / | 1 | 2 | 3 | . | \ |
| = | 7 | 8 | 9 | 0 | - | . | 1 | 2 | 3 | / | \ |
|------+------+------+------+------+------+------+------+------+------+------+------|
|Brite | | | | | | | Prev | Stop | Slct | Mute |
`-----------------------------------------------------------------------------------'
@ -69,18 +80,27 @@ keys at the far left are for quick access to beginning and end of line in vim.
as the modifier, with the `IJKL` home row keys representing the inverted-T of
the arrow keys. All of the default TouchCursor keymappings for the right hand
are represented below. My personalizations include all of the keys shown for
the left hand. Having the `Alt` and `Shift` keys readily accessible from the
home row allows quick word jumps and highlighting when used in conjunction with
the arrow keys. The `KC_UNDO, KC_CUT, KC_COPY, KC_PASTE, KC_FIND,` and
`KC_AGAIN` keycodes have been mapped but they don't seem to work on Mac.
Presumably they'll work under Windows.
the left hand. Having the `Alt` and `Shift` keys (as well as the `Control` key
from the base layers) readily accessible from the home row allows quick word
jumps and highlighting when used in conjunction with the arrow keys. The
`Alt-Tab` macro is not only useful under Windows, but also under Mac when used
with alternative switchers like [HyperSwitch](https://bahoom.com/hyperswitch).
The `Cmd-Tab` and `Ctrl-Tab` sequences are duplicated for easy access while in
this layer. The `KC_UNDO, KC_CUT, KC_COPY, KC_PASTE, KC_FIND,` and `KC_AGAIN`
keycodes do not seem to work. There are macros in place that'll "automatically"
choose the correct version (`Cmd-Tab` vs. `Alt-Tab`, `Cmd-C` vs. `Ctrl-C`,
etc.) depending on which layout you've currently selected (`AG_NORM` or
`AG_SWAP`) in the `_ADJUST` layer. The `Desk_L` and `Desk_R` macros are what I
use to switch between Virtual Desktops Left/Right. The `Tab_C`, `Tab_N` and
`Tab_R` are for "Close Tab," "New Tab" and "Reopen Closed Tab" for apps such as
Google Chrome.
```
,-----------------------------------------------------------------------------------.
| | | |Shift | GUI | ~ |Insert| Home | Up | End | Bksp | |
|AltTab|CmdTab|CtlTab| GUI |Shift | ~ |Insert| Home | Up | End | Bksp | |
|------+------+------+------+------+-------------+------+------+------+------+------|
| | Alt |Space | | Find |Again | PgUp | Left | Down |Right | | |
| | Alt |Space |Tab_C | Find |Again | PgUp | Left | Down |Right |Desk_L|Desk_R|
|------+------+------+------+------+------|------+------+------+------+------+------|
| | Undo | Cut | Copy |Paste | ` | PgDn | Del | | | | |
| | Undo | Cut | Copy |Paste | ` | PgDn | Del |Tab_N |Tab_R |iTerm2| |
|------+------+------+------+------+------+------+------+------+------+------+------|
| | | | | | | | | | | |
`-----------------------------------------------------------------------------------'
@ -88,19 +108,19 @@ Presumably they'll work under Windows.
## Mouse Layer
The Mouse layer, closely mimics the layout/behaviour of the TouchCursor layer.
The `A` key is used to activate this layer. All 16 keycodes for the mouse from
the `doc/keycode.txt` file are represented, and logically located, IMHO. The
left and right click buttons are duplicated; on the right hand side, for a
quick click here and there, and again on the left hand side for when the
The `D` key (on QWERTY) is used to activate this layer. All 16 keycodes for the
mouse from the `doc/keycode.txt` file are represented, and logically located,
IMHO. The left and right click buttons are duplicated; on the right hand side,
for a quick click here and there, and again on the left hand side for when the
buttons need to be held for dragging things or highlighting text, thus allowing
the right hand to be free to use the up/down/left/right actions.
```
,-----------------------------------------------------------------------------------.
| | |ACCL0 |ACCL1 |ACCL2 |ACCL2 | |WHL_L | Up |WHL_R | BTN2 | |
| | |ACCL0 | | | | |WHL_L | Up |WHL_R | BTN2 | |
|------+------+------+------+------+-------------+------+------+------+------+------|
| | | | BTN3 | BTN1 | BTN4 |WHL_Up| Left | Down |Right | | |
| |ACCL2 | BTN2 | | BTN1 |ACCL1 |WHL_Up| Left | Down |Right | BTN4 | BTN5 |
|------+------+------+------+------+------|------+------+------+------+------+------|
| | | | | BTN2 | BTN5 |WHL_Dn| BTN1 | | | | |
| | | | | BTN3 | |WHL_Dn| BTN1 | | | BTN3 | |
|------+------+------+------+------+------+------+------+------+------+------+------|
| | | | | | | | | | | |
`-----------------------------------------------------------------------------------'

77
quantum/keymap_extras/keymap_russian.h Normal file
View file

@ -0,0 +1,77 @@
#ifndef KEYMAP_RUSSIAN_H
#define KEYMAP_RUSSIAN_H
#include "keymap.h"
// Normal Chracters // reg SHIFT
#define RU_A KC_F // а and А
#define RU_BE KC_COMM // б and Б
#define RU_VE KC_D // в and В
#define RU_GHE KC_U // г and Г
#define RU_DE KC_L // д and Д
#define RU_IE KC_T // е and Е
#define RU_IO KC_GRV // ё and Ё
#define RU_ZHE KC_SCLN // ж and Ж
#define RU_ZE KC_P // з and З
#define RU_I KC_B // и and И
#define RU_SRT_I KC_Q // й and Й
#define RU_KA KC_R // к and К
#define RU_EL KC_K // л and Л
#define RU_EM KC_V // м and М
#define RU_EN KC_Y // н and Н
#define RU_O KC_J // о and О
#define RU_PE KC_G // п and П
#define RU_ER KC_H // р and Р
#define RU_ES KC_C // с and С
#define RU_TE KC_N // т and Т
#define RU_U KC_E // у and У
#define RU_EF KC_A // ф and Ф
#define RU_HA KC_LBRC // х and Х
#define RU_TSE KC_W // ц and Ц
#define RU_CHE KC_X // ч and Ч
#define RU_SHA KC_I // ш and Ш
#define RU_SHCHA KC_O // щ and Щ
#define RU_HSIGN KC_RBRC // ъ and Ъ
#define RU_YERU KC_S // ы and Ы
#define RU_SSIGN KC_M // ь and Ь
#define RU_E KC_QUOT // э and Э
#define RU_YU KC_DOT // ю and Ю
#define RU_YA KC_Z // я and Я
#define RU_1 KC_1 // 1 and !
#define RU_2 KC_2 // 2 and "
#define RU_3 KC_3 // 3 and №
#define RU_4 KC_4 // 4 and ;
#define RU_5 KC_5 // 5 and %
#define RU_6 KC_6 // 6 and :
#define RU_7 KC_7 // 7 and ?
#define RU_8 KC_8 // 8 and *
#define RU_9 KC_9 // 9 and (
#define RU_0 KC_0 // 0 and )
#define RU_MINS KC_MINS // - and _
#define RU_EQL KC_EQL // = and +
#define RU_BSLS KC_BSLS // \ and /
#define RU_DOT KC_SLSH // . and ,
// Shifted Chracters
#define RU_EXLM LSFT(RU_1) // !
#define RU_DQUT LSFT(RU_2) // "
#define RU_NMRO LSFT(RU_3) // №
#define RU_SCLN LSFT(RU_4) // ;
#define RU_PERC LSFT(RU_5) // %
#define RU_COLN LSFT(RU_6) // :
#define RU_QUES LSFT(RU_7) // ?
#define RU_ASTR LSFT(RU_8) // *
#define RU_LPRN LSFT(RU_9) // (
#define RU_RPRN LSFT(RU_0) // )
#define RU_UNDR LSFT(RU_MINS) // _
#define RU_PLUS LSFT(RU_EQL) // +
#define RU_SLSH LSFT(RU_BSLS) // /
#define RU_COMM LSFT(RU_DOT) // ,
// Alt Gr-ed characters
#define RU_RUBL RALT(RU_8) // ₽
#endif

6
quantum/keymap_extras/keymap_cyrillic.h → quantum/keymap_extras/keymap_unicode_cyrillic.h
View file

@ -6,6 +6,8 @@
/*
* This is based off of
* https://en.wikipedia.org/wiki/Cyrillic_script
*
* Unicode is iffy, a software implementation is preferred
*/
// Capital Char russian/ukrainian/bulgarian
@ -153,8 +155,8 @@
#define CY_thsign UC(0x1c86) // ᲆ CYRILLIC SMALL LETTER TALL HARD SIGN
#define CY_YERUBY UC(0xa650) // Ꙑ CYRILLIC CAPITAL LETTER YERU WITH BACK YER
#define CY_yeruby UC(0xa651) // ꙑ CYRILLIC SMALL LETTER YERU WITH BACK YER
#define CY_RUBLE UC(0x20bd) // ₽
#define CY_NUMERO UC(0x2116) // №
#define CY_RUBL UC(0x20bd) // ₽
#define CY_NMRO UC(0x2116) // №
// The letters Zje and Sje are made for other letters and accent marks

5
tmk_core/avr.mk
View file

@ -138,6 +138,11 @@ else
endif
dfu-programmer $(MCU) reset
# Convert hex to bin.
flashbin: $(BUILD_DIR)/$(TARGET).hex
$(OBJCOPY) -Iihex -Obinary $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).bin
$(COPY) $(BUILD_DIR)/$(TARGET).bin $(TARGET).bin;
$(COPY) $(BUILD_DIR)/$(TARGET).bin FLASH.bin;
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set