1
0
Fork 0

Merge remote-tracking branch 'origin/master' into develop

This commit is contained in:
QMK Bot 2021-09-18 06:52:51 +00:00
commit 6fcc5cdde9
19 changed files with 439 additions and 0 deletions

View file

@ -0,0 +1,73 @@
/*
Copyright 2021 DTIsaac
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0x4454 // DT
#define PRODUCT_ID 0x4973 // Is
#define DEVICE_VER 0x0004
#define MANUFACTURER DTIsaac
#define PRODUCT >_Dosa40
/* key matrix size */
#define MATRIX_ROWS 4
#define MATRIX_COLS 11
/* AdafruitBle Pin */
#define AdafruitBleResetPin D4
#define AdafruitBleCSPin B4
#define AdafruitBleIRQPin E6
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { B7, D7, F1, F0 }
#define MATRIX_COL_PINS { D1, D6, D3, D2, B6, C6, C7, F7, F6, F5, F4 }
#define UNUSED_PINS
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
#ifdef RGB_MATRIX_ENABLE
#define RGB_DI_PIN D0
#define DRIVER_LED_TOTAL 42
#define RGB_MATRIX_KEYPRESSES // reacts to keypresses
#define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
// #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
#define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set
#endif
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* disable these deprecated features by default */
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION

View file

@ -0,0 +1,39 @@
/* Copyright 2021 DTIsaac
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "dosa40rgb.h"
#ifdef RGB_MATRIX_ENABLE
led_config_t g_led_config = { {
//Key Matrix to LED Index
{0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10},
{22, 21, 20, 19, 18, 17, 16, 15, 14, 13, 12 },
{23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33},
{41, 40, 39, NO_LED, 38, NO_LED, 37, 36, 35, 34, 11}
}, {
//LED Index to Physical Positon
{ 0, 0}, { 20, 0}, { 40, 0 }, { 61, 0 }, { 81, 0}, { 101, 0}, { 122, 0}, { 142, 0}, { 162, 0}, { 183, 0}, { 203, 0}, { 224, 0},
{203, 21}, {183, 21}, {162,21 }, {142, 21}, {122,21}, { 101,21}, { 81 ,21}, { 61 ,21}, { 40 ,21}, { 20 ,21}, { 0 ,21},
{ 0, 42}, { 20, 42}, { 40,42 }, { 61, 42}, { 81,42}, { 101,42}, { 122,42}, { 142,42}, { 162,42}, { 183,42}, { 203,42},
{203, 64}, {183, 64}, {162,64 }, {122, 64}, { 81,64}, { 40, 64}, { 20, 64}, { 0, 64},
}, {
1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
1, 1, 1, 1, 1, 1, 1, 1,
} };
#endif

View file

@ -0,0 +1,40 @@
/* Copyright 2021 DTIsaac
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "quantum.h"
/* This is a shortcut to help you visually see your layout.
*
* The first section contains all of the arguments representing the physical
* layout of the board and position of the keys.
*
* The second converts the arguments into a two-dimensional array which
* represents the switch matrix.
*/
#define LAYOUT( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k41, \
k11, k12, k13, k14, k15, k16, k17, k18, k19, k20, k21, \
k22, k23, k24, k25, k26, k27, k28, k29, k30, k31, k32, \
k33, k34, k35, k36, k37, k38, k39, k40 \
) \
{ \
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10}, \
{k11, k12, k13, k14, k15, k16, k17, k18, k19, k20, k21}, \
{k22, k23, k24, k25, k26, k27, k28, k29, k30, k31, k32}, \
{k33, k34, k35, KC_NO,k36, KC_NO, k37, k38, k39, k40, k41}, \
}

View file

@ -0,0 +1,53 @@
{
"keyboard_name": ">_Dosa40rgb",
"url": "",
"maintainer": "DTIsaac",
"layouts": {
"LAYOUT": {
"layout": [
{"label":"Esc", "x":0, "y":0},
{"label":"Q", "x":1, "y":0},
{"label":"W", "x":2, "y":0},
{"label":"E", "x":3, "y":0},
{"label":"R", "x":4, "y":0},
{"label":"T", "x":5, "y":0},
{"label":"Y", "x":6, "y":0},
{"label":"U", "x":7, "y":0},
{"label":"I", "x":8, "y":0},
{"label":"O", "x":9, "y":0},
{"label":"P", "x":10, "y":0},
{"label":"BSPC", "x":11, "y":0},
{"label":"Caps Lock", "x":0, "y":1, "w":1.5},
{"label":"A", "x":1.5, "y":1},
{"label":"S", "x":2.5, "y":1},
{"label":"D", "x":3.5, "y":1},
{"label":"F", "x":4.5, "y":1},
{"label":"G", "x":5.5, "y":1},
{"label":"H", "x":6.5, "y":1},
{"label":"J", "x":7.5, "y":1},
{"label":"K", "x":8.5, "y":1},
{"label":"L", "x":9.5, "y":1},
{"label":"Enter", "x":10.5, "y":1, "w":1.5},
{"label":"Shift", "x":0, "y":2, "w":1.75},
{"label":"Z", "x":1.75, "y":2},
{"label":"X", "x":2.75, "y":2},
{"label":"C", "x":3.75, "y":2},
{"label":"V", "x":4.75, "y":2},
{"label":"B", "x":5.75, "y":2},
{"label":"N", "x":6.75, "y":2},
{"label":"M", "x":7.75, "y":2},
{"label":",", "x":8.75, "y":2},
{"label":".", "x":9.75, "y":2},
{"label":"Shift", "x":10.75, "y":2, "w":1.25},
{"label":"Ctrl", "x":0, "y":3, "w":1.25},
{"label":"Win", "x":1.25, "y":3, "w":1},
{"label":"Alt", "x":2.25, "y":3, "w":1.25},
{"label":"Space", "x":3.5, "y":3, "w":2.25},
{"label":"Space", "x":5.75, "y":3, "w":2.75},
{"label":"App", "x":8.5, "y":3, "w":1.25},
{"label":"Fn", "x":9.75, "y":3, "w":1},
{"label":"Ctrl", "x":10.75, "y":3, "w":1.25}
]
}
}
}

View file

@ -0,0 +1,122 @@
/* Copyright 2021 DTIsaac
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
#include "spi_master.h"
#include "wait.h"
// Defines names for use in layer keycodes and the keymap
enum layer_names {
_BASE,
_L1,
_L2
};
// Defines the keycodes used by our macros in process_record_user
enum custom_keycodes {
BASE,
L1,
BLE_DIS, // Disconnect BLE
LED_EN, // Toggle LED
};
#define L1 MO(_L1)
const uint8_t cm1[] = "AT+GAPSTOPADV";
const uint8_t cm2[] = "AT+GAPDISCONNECT";
const uint8_t cm3[] = "ATZ";
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Base */
[_BASE] = LAYOUT(
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
LT(_L2,KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT,
KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_SPACE, KC_RALT, L1, KC_RCTL
),
[_L1] = LAYOUT(
RESET, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL,
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_SCLN, KC_QUOT,
KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_SLSH, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
),
[_L2] = LAYOUT(
LED_EN, RGB_RMOD, KC_UP, RGB_MOD, RGB_HUI, RGB_VAI, RGB_SAI, RGB_SPI, KC_TRNS, OUT_USB, OUT_BT, BLE_DIS,
KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, RGB_HUD, RGB_VAD, RGB_SAD, RGB_SPD, KC_TRNS, KC_TRNS, KC_BSLS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TAB, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
),
};
void rgb_matrix_indicators_user(void)
{
if (host_keyboard_led_state().caps_lock)
{
rgb_matrix_set_color(22, 200, 200, 200);
}
if (IS_LAYER_ON(_L1))
{
rgb_matrix_set_color(35, 0, 200, 200);
}
if (IS_LAYER_ON(_L2))
{
rgb_matrix_set_color(22, 200, 0, 200);
}
}
void sdep_send(const uint8_t *cmd, uint8_t len) {
spi_start(AdafruitBleCSPin, false, 0, 2);
uint8_t cnt = 200;
bool ready = false;
do {
ready = spi_write(0x10) != 0xFE;
if (ready) {
break;
}
spi_stop();
wait_us(25);
spi_start(AdafruitBleCSPin, false, 0, 2);
} while (cnt--);
if (ready) {
spi_write(0x00);
spi_write(0x0A);
spi_write(len);
spi_transmit(cmd, len);
}
spi_stop();
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case LED_EN:
if (record->event.pressed) {
DDRB = DDRB ^ 0x20;
PORTB &= ~(1 << 5);
}
return false;
case BLE_DIS:
if (record->event.pressed) {
sdep_send(cm1,sizeof(cm1));
sdep_send(cm2,sizeof(cm2));
sdep_send(cm3,sizeof(cm3));
}
return false;
}
return true;
}

View file

@ -0,0 +1 @@
# The default keymap for dosa40rgb

View file

@ -0,0 +1,25 @@
# dosa40rgb
![dosa40rgb](https://i.imgur.com/NfuF82nh.jpg)
A 40 percent keyboard dosa40rgb Bluetooth Low Energy
* Keyboard Maintainer: [DTIsaac](https://github.com/daotakisaac)
* Hardware Supported: ATmega32U4 + AdafruitBLE SPI
Make example for this keyboard (after setting up your build environment):
make dtisaac/dosa40rgb:default
Flashing example for this keyboard:
make dtisaac/dosa40rgb:default:flash
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Bootloader
Enter the bootloader in 2 ways:
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available

View file

@ -0,0 +1,25 @@
# MCU name
MCU = atmega32u4
# Bootloader selection
BOOTLOADER = lufa-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = no # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
BLUETOOTH_ENABLE = no # Enable Bluetooth
AUDIO_ENABLE = no # Audio output
BLUETOOTH = AdafruitBLE # Enable Bluetooth
RGB_MATRIX_ENABLE = yes
RGB_MATRIX_DRIVER = WS2812

View file

@ -0,0 +1,59 @@
/* Copyright 2021 DTIsaac
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
// Defines names for use in layer keycodes and the keymap
enum layers {
_LAYER0,
_LAYER1,
_LAYER2,
_LAYER3,
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_LAYER0] = LAYOUT(
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS,
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN,
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, LT(1, KC_NO), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
),
[_LAYER1] = LAYOUT(
RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_SLEP, KC_WAKE, KC_PWR,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_STEP, BL_ON, BL_INC,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_BRTG, BL_OFF, BL_DEC,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU,
_______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT
),
[_LAYER2] = LAYOUT(
RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
),
[_LAYER3] = LAYOUT(
RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
),
};

View file

@ -0,0 +1 @@
# The default keymap for dtisaac01

View file

@ -0,0 +1 @@
VIA_ENABLE = yes