1
0
Fork 0

Rename ONEHAND_ENABLE to SWAP_HANDS_ENABLE for consistency

This commit is contained in:
Joe Wasson 2018-03-11 14:07:02 -07:00 committed by Jack Humbert
parent 687c7070a1
commit 7230923b05
28 changed files with 45 additions and 42 deletions

View file

@ -1,6 +1,6 @@
# Swap-Hands Action # Swap-Hands Action
The swap-hands action allows support for one-handed typing without requiring a separate layer. Set `ONEHAND_ENABLE` in the Makefile and define a `hand_swap_config` entry in your keymap. Now whenever the `ACTION_SWAP_HANDS` command key is pressed the keyboard is mirrored. For instance, to type "Hello, World" on QWERTY you would type `^Ge^s^s^w^c W^wr^sd` The swap-hands action allows support for one-handed typing without requiring a separate layer. Set `SWAP_HANDS_ENABLE` in the Makefile and define a `hand_swap_config` entry in your keymap. Now whenever the `ACTION_SWAP_HANDS` command key is pressed the keyboard is mirrored. For instance, to type "Hello, World" on QWERTY you would type `^Ge^s^s^w^c W^wr^sd`
## Configuration ## Configuration

View file

@ -1,6 +1,6 @@
#include "ergo42.h" #include "ergo42.h"
#ifdef ONEHAND_ENABLE #ifdef SWAP_HANDS_ENABLE
__attribute__ ((weak)) __attribute__ ((weak))
const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {

View file

@ -5,7 +5,7 @@
# #
# make clean = Clean out built project files. # make clean = Clean out built project files.
# #
# That's pretty much all you need. To compile, always go make clean, # That's pretty much all you need. To compile, always go make clean,
# followed by make. # followed by make.
# #
# For advanced users only: # For advanced users only:
@ -88,7 +88,7 @@ FADING_LED_ENABLE = no # Enable fading backlight
BREATHING_LED_ENABLE = no # Enable breathing backlight BREATHING_LED_ENABLE = no # Enable breathing backlight
LEDMAP_ENABLE = no # Enable LED mapping LEDMAP_ENABLE = no # Enable LED mapping
LEDMAP_IN_EEPROM_ENABLE = no # Read LED mapping from eeprom LEDMAP_IN_EEPROM_ENABLE = no # Read LED mapping from eeprom
ONEHAND_ENABLE = no # Disable Onehand SWAP_HANDS_ENABLE = no # Disable Onehand
RGBLIGHT_ENABLE = no RGBLIGHT_ENABLE = no
MIDI_ENABLE = no MIDI_ENABLE = no

View file

@ -100,7 +100,7 @@ void ergodox_blink_all_leds(void)
mcp23018_status = ergodox_left_leds_update(); mcp23018_status = ergodox_left_leds_update();
} }
#endif #endif
//ergodox_led_all_on(); //ergodox_led_all_on();
//_delay_ms(333); //_delay_ms(333);
ergodox_led_all_off(); ergodox_led_all_off();
@ -185,7 +185,7 @@ uint8_t ergodox_left_leds_update(void) {
#endif #endif
#ifdef ONEHAND_ENABLE #ifdef SWAP_HANDS_ENABLE
__attribute__ ((weak)) __attribute__ ((weak))
// swap-hands action needs a matrix to define the swap // swap-hands action needs a matrix to define the swap
const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {

View file

@ -2,7 +2,7 @@ MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control EXTRAKEY_ENABLE = yes # Audio control and System control
COMMAND_ENABLE = yes # Commands for debug and configuration COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # USB Nkey Rollover - for issues, see github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover - for issues, see github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
ONEHAND_ENABLE = yes # Allow swapping hands of keyboard SWAP_HANDS_ENABLE= yes # Allow swapping hands of keyboard
KEY_LOCK_ENABLE = yes # Enable the KC_LOCK key KEY_LOCK_ENABLE = yes # Enable the KC_LOCK key
TAP_DANCE_ENABLE = yes # Enable the tap dance feature. TAP_DANCE_ENABLE = yes # Enable the tap dance feature.
CONSOLE_ENABLE = yes # Console for debug CONSOLE_ENABLE = yes # Console for debug

View file

@ -5,7 +5,7 @@
# #
# make clean = Clean out built project files. # make clean = Clean out built project files.
# #
# That's pretty much all you need. To compile, always go make clean, # That's pretty much all you need. To compile, always go make clean,
# followed by make. # followed by make.
# #
# For advanced users only: # For advanced users only:
@ -56,7 +56,7 @@ F_USB = $(F_CPU)
# Bootloader # Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of # This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded # different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options. # automatically (+60). See bootloader.mk for all options.
BOOTLOADER = halfkay BOOTLOADER = halfkay
@ -79,9 +79,9 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
CUSTOM_MATRIX = yes # Custom matrix file for the ErgoDox EZ CUSTOM_MATRIX = yes # Custom matrix file for the ErgoDox EZ
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
UNICODE_ENABLE = yes # Unicode UNICODE_ENABLE = yes # Unicode
ONEHAND_ENABLE = yes # Allow swapping hands of keyboard SWAP_HANDS_ENABLE= yes # Allow swapping hands of keyboard
SLEEP_LED_ENABLE = no SLEEP_LED_ENABLE = no
API_SYSEX_ENABLE = no API_SYSEX_ENABLE = no
RGBLIGHT_ENABLE = yes RGBLIGHT_ENABLE = yes
LAYOUTS = ergodox LAYOUTS = ergodox

View file

@ -174,7 +174,7 @@ __attribute__ ((weak))
void ergodox_right_led_3_set(uint8_t n) { void ergodox_right_led_3_set(uint8_t n) {
} }
#ifdef ONEHAND_ENABLE #ifdef SWAP_HANDS_ENABLE
__attribute__ ((weak)) __attribute__ ((weak))
const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
{{0, 9}, {1, 9}, {2, 9}, {3, 9}, {4, 9}}, {{0, 9}, {1, 9}, {2, 9}, {3, 9}, {4, 9}},

View file

@ -67,7 +67,7 @@ CUSTOM_MATRIX = yes # Custom matrix file for the ErgoDox EZ
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
UNICODE_ENABLE = yes # Unicode UNICODE_ENABLE = yes # Unicode
ONEHAND_ENABLE = yes # Allow swapping hands of keyboard SWAP_HANDS_ENABLE = yes # Allow swapping hands of keyboard
STENO_ENABLE = yes #enable plover steno mode STENO_ENABLE = yes #enable plover steno mode
CUSTOM_MATRIX = yes # Custom matrix file CUSTOM_MATRIX = yes # Custom matrix file
SERIAL_LINK_ENABLE = yes SERIAL_LINK_ENABLE = yes

View file

@ -67,7 +67,7 @@ CUSTOM_MATRIX = yes # Custom matrix file for the ErgoDox EZ
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
UNICODE_ENABLE = yes # Unicode UNICODE_ENABLE = yes # Unicode
ONEHAND_ENABLE = yes # Allow swapping hands of keyboard SWAP_HANDS_ENABLE= yes # Allow swapping hands of keyboard
CUSTOM_MATRIX = yes # Custom matrix file CUSTOM_MATRIX = yes # Custom matrix file
SERIAL_LINK_ENABLE = yes SERIAL_LINK_ENABLE = yes
@ -79,11 +79,11 @@ MIDI_ENABLE = no
RGBLIGHT_ENABLE = no RGBLIGHT_ENABLE = no
LCD_DRIVER = st7565 LCD_DRIVER = st7565
LCD_WIDTH = 128 LCD_WIDTH = 128
LCD_HEIGHT = 32 LCD_HEIGHT = 32
LED_DRIVER = is31fl3731c LED_DRIVER = is31fl3731c
LED_WIDTH = 7 LED_WIDTH = 7
LED_HEIGHT = 7 LED_HEIGHT = 7
LAYOUTS = ergodox LAYOUTS = ergodox

View file

@ -1,7 +1,7 @@
# Build Options # Build Options
# change to "no" to disable the options, or define them in the Makefile in # change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically # the appropriate keymap folder that will get included automatically
# #
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
@ -16,7 +16,7 @@ AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
ONEHAND_ENABLE = no # Enable one-hand typing SWAP_HANDS_ENABLE = no # Enable one-hand typing
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend

View file

@ -1,7 +1,7 @@
# Build Options # Build Options
# change to "no" to disable the options, or define them in the Makefile in # change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically # the appropriate keymap folder that will get included automatically
# #
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
@ -16,7 +16,7 @@ AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
ONEHAND_ENABLE = no # Enable one-hand typing SWAP_HANDS_ENABLE = no # Enable one-hand typing
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend

View file

@ -57,7 +57,7 @@ out:
return mcp23018_status; return mcp23018_status;
} }
#ifdef ONEHAND_ENABLE #ifdef SWAP_HANDS_ENABLE
__attribute__ ((weak)) __attribute__ ((weak))
// swap-hands action needs a matrix to define the swap // swap-hands action needs a matrix to define the swap
const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {

View file

@ -80,7 +80,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration
CUSTOM_MATRIX = yes # Custom matrix file for the Dactyl CUSTOM_MATRIX = yes # Custom matrix file for the Dactyl
NKRO_ENABLE = yes # USB Nkey Rollover NKRO_ENABLE = yes # USB Nkey Rollover
UNICODE_ENABLE = yes # Unicode UNICODE_ENABLE = yes # Unicode
ONEHAND_ENABLE = yes # Allow swapping hands of keyboard SWAP_HANDS_ENABLE = yes # Allow swapping hands of keyboard
SLEEP_LED_ENABLE = no SLEEP_LED_ENABLE = no
API_SYSEX_ENABLE = no API_SYSEX_ENABLE = no
RGBLIGHT_ENABLE = no RGBLIGHT_ENABLE = no

View file

@ -15,7 +15,7 @@ AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
ONEHAND_ENABLE = no # Enable one-hand typing SWAP_HANDS_ENABLE = no # Enable one-hand typing
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend

View file

@ -17,7 +17,7 @@ BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
# Helix keyboard : see ./config.h: RGBLED_NUM 6 or 32 # Helix keyboard : see ./config.h: RGBLED_NUM 6 or 32
# Helix keyboard : RGBLIGHT_ENABLE = no or yes # Helix keyboard : RGBLIGHT_ENABLE = no or yes
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
ONEHAND_ENABLE = no # Enable one-hand typing SWAP_HANDS_ENABLE = no # Enable one-hand typing
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend

View file

@ -1,6 +1,6 @@
# Build Options # Build Options
# change to "no" to disable the options, or define them in the Makefile in # change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically # the appropriate keymap folder that will get included automatically
# #
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
@ -15,7 +15,7 @@ AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
ONEHAND_ENABLE = no # Enable one-hand typing SWAP_HANDS_ENABLE = no # Enable one-hand typing
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend

View file

@ -15,7 +15,7 @@ AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
ONEHAND_ENABLE = no # Enable one-hand typing SWAP_HANDS_ENABLE = no # Enable one-hand typing
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend

View file

@ -1,6 +1,6 @@
# Build Options # Build Options
# change to "no" to disable the options, or define them in the Makefile in # change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically # the appropriate keymap folder that will get included automatically
# #
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
@ -15,7 +15,7 @@ AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
ONEHAND_ENABLE = no # Enable one-hand typing SWAP_HANDS_ENABLE = no # Enable one-hand typing
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend

View file

@ -1,6 +1,6 @@
#include "lets_split.h" #include "lets_split.h"
#ifdef ONEHAND_ENABLE #ifdef SWAP_HANDS_ENABLE
__attribute__ ((weak)) __attribute__ ((weak))
const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {

View file

@ -1,6 +1,6 @@
#include "levinson.h" #include "levinson.h"
#ifdef ONEHAND_ENABLE #ifdef SWAP_HANDS_ENABLE
__attribute__ ((weak)) __attribute__ ((weak))
const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {

View file

@ -30,7 +30,7 @@ void led_set_kb(uint8_t usb_led) {
} }
#ifdef ONEHAND_ENABLE #ifdef SWAP_HANDS_ENABLE
__attribute__ ((weak)) __attribute__ ((weak))
const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
{{9, 0}, {8, 0}, {7, 0}, {6, 0}, {5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}}, {{9, 0}, {8, 0}, {7, 0}, {6, 0}, {5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}},

View file

@ -1,6 +1,6 @@
#include "niu_mini.h" #include "niu_mini.h"
#ifdef ONEHAND_ENABLE #ifdef SWAP_HANDS_ENABLE
__attribute__ ((weak)) __attribute__ ((weak))
const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
{{11, 0}, {10, 0}, {9, 0}, {8, 0}, {7, 0}, {6, 0}, {5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}}, {{11, 0}, {10, 0}, {9, 0}, {8, 0}, {7, 0}, {6, 0}, {5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}},

View file

@ -16,7 +16,7 @@ AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
ONEHAND_ENABLE = yes # Enable one-hand typing SWAP_HANDS_ENABLE = yes # Enable one-hand typing
STENO_ENABLE = yes # Enable TX Bolt protocol for Stenography, requires VIRTSER and may not work with mouse keys STENO_ENABLE = yes # Enable TX Bolt protocol for Stenography, requires VIRTSER and may not work with mouse keys
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE

View file

@ -1,6 +1,6 @@
#include "planck.h" #include "planck.h"
#ifdef ONEHAND_ENABLE #ifdef SWAP_HANDS_ENABLE
__attribute__ ((weak)) __attribute__ ((weak))
const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
{{11, 0}, {10, 0}, {9, 0}, {8, 0}, {7, 0}, {6, 0}, {5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}}, {{11, 0}, {10, 0}, {9, 0}, {8, 0}, {7, 0}, {6, 0}, {5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}},

View file

@ -1,6 +1,6 @@
#include "preonic.h" #include "preonic.h"
#ifdef ONEHAND_ENABLE #ifdef SWAP_HANDS_ENABLE
__attribute__ ((weak)) __attribute__ ((weak))
const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
{{11, 0}, {10, 0}, {9, 0}, {8, 0}, {7, 0}, {6, 0}, {5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}}, {{11, 0}, {10, 0}, {9, 0}, {8, 0}, {7, 0}, {6, 0}, {5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}},

View file

@ -25,7 +25,7 @@ TMK_COMMON_SRC += $(COMMON_DIR)/host.c \
ifeq ($(PLATFORM),AVR) ifeq ($(PLATFORM),AVR)
TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/xprintf.S TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/xprintf.S
endif endif
ifeq ($(PLATFORM),CHIBIOS) ifeq ($(PLATFORM),CHIBIOS)
TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/printf.c TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/printf.c
@ -124,7 +124,10 @@ ifeq ($(strip $(BLUETOOTH)), RN42)
endif endif
ifeq ($(strip $(ONEHAND_ENABLE)), yes) ifeq ($(strip $(ONEHAND_ENABLE)), yes)
TMK_COMMON_DEFS += -DONEHAND_ENABLE SWAP_HANDS_ENABLE = yes # backwards compatibility
endif
ifeq ($(strip $(SWAP_HANDS_ENABLE)), yes)
TMK_COMMON_DEFS += -DSWAP_HANDS_ENABLE
endif endif
ifeq ($(strip $(NO_USB_STARTUP_CHECK)), yes) ifeq ($(strip $(NO_USB_STARTUP_CHECK)), yes)

View file

@ -64,7 +64,7 @@ void action_exec(keyevent_t event)
fauxclicky_check(); fauxclicky_check();
#endif #endif
#ifdef ONEHAND_ENABLE #ifdef SWAP_HANDS_ENABLE
if (!IS_NOEVENT(event)) { if (!IS_NOEVENT(event)) {
process_hand_swap(&event); process_hand_swap(&event);
} }
@ -91,7 +91,7 @@ void action_exec(keyevent_t event)
#endif #endif
} }
#ifdef ONEHAND_ENABLE #ifdef SWAP_HANDS_ENABLE
bool swap_hands = false; bool swap_hands = false;
void process_hand_swap(keyevent_t *event) { void process_hand_swap(keyevent_t *event) {
@ -524,7 +524,7 @@ void process_action(keyrecord_t *record, action_t action)
#endif #endif
case ACT_COMMAND: case ACT_COMMAND:
break; break;
#ifdef ONEHAND_ENABLE #ifdef SWAP_HANDS_ENABLE
case ACT_SWAP_HANDS: case ACT_SWAP_HANDS:
switch (action.swap.code) { switch (action.swap.code) {
case OP_SH_TOGGLE: case OP_SH_TOGGLE:

View file

@ -67,7 +67,7 @@ extern bool disable_action_cache;
#endif #endif
/* Code for handling one-handed key modifiers. */ /* Code for handling one-handed key modifiers. */
#ifdef ONEHAND_ENABLE #ifdef SWAP_HANDS_ENABLE
extern bool swap_hands; extern bool swap_hands;
extern const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS]; extern const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS];
#if (MATRIX_COLS <= 8) #if (MATRIX_COLS <= 8)