diff --git a/docs/config_options.md b/docs/config_options.md
index 21c9972e04..81a3b4b61c 100644
--- a/docs/config_options.md
+++ b/docs/config_options.md
@@ -43,8 +43,6 @@ This is a C header file that is one of the first things included, and will persi
* generally who/whatever brand produced the board
* `#define PRODUCT Board`
* the name of the keyboard
-* `#define DESCRIPTION a keyboard`
- * a short description of what the keyboard is
* `#define MATRIX_ROWS 5`
* the number of rows in your keyboard's matrix
* `#define MATRIX_COLS 15`
diff --git a/docs/es/hardware_avr.md b/docs/es/hardware_avr.md
index 4236292a12..2ecf78d662 100644
--- a/docs/es/hardware_avr.md
+++ b/docs/es/hardware_avr.md
@@ -67,7 +67,7 @@ El archivo `config.h` es donde configuras el hardware y el conjunto de caracter
En la parte superior de `config.h` encontrarás ajustes relacionados con USB. Estos controlan la apariencia de tu teclado en el Sistema Operativo. Si no tienes una buena razón para cambiar debes dejar el `VENDOR_ID` como `0xFEED`. Para el `PRODUCT_ID` debes seleccionar un número que todavía no esté en uso.
-Cambia las líneas de `MANUFACTURER`, `PRODUCT`, y `DESCRIPTION` para reflejar con precisión tu teclado.
+Cambia las líneas de `MANUFACTURER` y `PRODUCT` para reflejar con precisión tu teclado.
```c
#define VENDOR_ID 0xFEED
@@ -75,7 +75,6 @@ Cambia las líneas de `MANUFACTURER`, `PRODUCT`, y `DESCRIPTION` para reflejar c
#define DEVICE_VER 0x0001
#define MANUFACTURER Tú
#define PRODUCT mi_teclado_fantastico
-#define DESCRIPTION Un teclado personalizado
```
?> Windows y macOS mostrarán el `MANUFACTURER` y `PRODUCT` en la lista de dispositivos USB. `lsusb` en Linux toma estos de la lista mantenida por el [Repositorio de ID USB](http://www.linux-usb.org/usb-ids.html) por defecto. `lsusb -v` mostrará los valores reportados por el dispositivo, y también están presentes en los registros del núcleo después de conectarlo.
diff --git a/docs/hardware_avr.md b/docs/hardware_avr.md
index 697c55d2a8..2c0f2e9a1a 100644
--- a/docs/hardware_avr.md
+++ b/docs/hardware_avr.md
@@ -67,7 +67,7 @@ The `config.h` file is where you configure the hardware and feature set for your
At the top of the `config.h` you'll find USB related settings. These control how your keyboard appears to the Operating System. If you don't have a good reason to change you should leave the `VENDOR_ID` as `0xFEED`. For the `PRODUCT_ID` you should pick a number that is not yet in use.
-Do change the `MANUFACTURER`, `PRODUCT`, and `DESCRIPTION` lines to accurately reflect your keyboard.
+Do change the `MANUFACTURER` and `PRODUCT` lines to accurately reflect your keyboard.
```c
#define VENDOR_ID 0xFEED
@@ -75,7 +75,6 @@ Do change the `MANUFACTURER`, `PRODUCT`, and `DESCRIPTION` lines to accurately r
#define DEVICE_VER 0x0001
#define MANUFACTURER You
#define PRODUCT my_awesome_keyboard
-#define DESCRIPTION A custom keyboard
```
?> Windows and macOS will display the `MANUFACTURER` and `PRODUCT` in the list of USB devices. `lsusb` on Linux instead takes these from the list maintained by the [USB ID Repository](http://www.linux-usb.org/usb-ids.html) by default. `lsusb -v` will show the values reported by the device, and they are also present in kernel logs after plugging it in.
diff --git a/docs/ja/config_options.md b/docs/ja/config_options.md
index 9e0dd71472..55ee2cfbe9 100644
--- a/docs/ja/config_options.md
+++ b/docs/ja/config_options.md
@@ -48,8 +48,6 @@ QMK での全ての利用可能な設定にはデフォルトがあります。
* 一般的に、誰もしくはどのブランドがボードを作成したか
* `#define PRODUCT Board`
* キーボードの名前
-* `#define DESCRIPTION a keyboard`
- * キーボードの簡単な説明
* `#define MATRIX_ROWS 5`
* キーボードのマトリックスの行の数
* `#define MATRIX_COLS 15`
diff --git a/docs/ja/hardware_avr.md b/docs/ja/hardware_avr.md
index fecbfd71ff..0cba943c15 100644
--- a/docs/ja/hardware_avr.md
+++ b/docs/ja/hardware_avr.md
@@ -73,7 +73,7 @@ or open the directory in your favourite text editor.
`config.h` の先頭には USB に関する設定があります。これらはキーボードが OS からどのように見えるかを制御しています。変更する理由がない場合は、`VENDOR_ID` を `0xFEED` のままにしておく必要があります。`PRODUCT_ID` にはまだ使用されていない番号を選ばなければいけません。
-`MANUFACTURER`、 `PRODUCT`、 `DESCRIPTION` をキーボードにあった設定に変更します。
+`MANUFACTURER`、 `PRODUCT` をキーボードにあった設定に変更します。
```c
#define VENDOR_ID 0xFEED
@@ -81,7 +81,6 @@ or open the directory in your favourite text editor.
#define DEVICE_VER 0x0001
#define MANUFACTURER You
#define PRODUCT my_awesome_keyboard
-#define DESCRIPTION A custom keyboard
```
?> Windows や macOS では、`MANUFACTURER` と `PRODUCT` が USBデバイスのリストに表示されます。Linux 上の `lsusb` では、代わりにデフォルトで [USB ID Repository](http://www.linux-usb.org/usb-ids.html) によって維持されているリストからこれらを取得します。`lsusb -v` を使用するとデバイスから示された値を表示します。また、接続したときのカーネルログにも表示されます。
diff --git a/lib/python/qmk/info.py b/lib/python/qmk/info.py
index e1ace5d51b..de7632e378 100644
--- a/lib/python/qmk/info.py
+++ b/lib/python/qmk/info.py
@@ -77,7 +77,6 @@ def _extract_config_h(info_data):
'device_ver': config_c.get('DEVICE_VER'),
'manufacturer': config_c.get('MANUFACTURER'),
'product': config_c.get('PRODUCT'),
- 'description': config_c.get('DESCRIPTION'),
}
return info_data
diff --git a/quantum/template/avr/config.h b/quantum/template/avr/config.h
index 8b0961f24b..5f0bc73633 100644
--- a/quantum/template/avr/config.h
+++ b/quantum/template/avr/config.h
@@ -25,7 +25,6 @@ along with this program. If not, see .
#define DEVICE_VER 0x0001
#define MANUFACTURER %YOUR_NAME%
#define PRODUCT %KEYBOARD%
-#define DESCRIPTION A custom keyboard
/* key matrix size */
#define MATRIX_ROWS 2
diff --git a/quantum/template/ps2avrgb/config.h b/quantum/template/ps2avrgb/config.h
index 126afbcbd7..ef065c0f10 100644
--- a/quantum/template/ps2avrgb/config.h
+++ b/quantum/template/ps2avrgb/config.h
@@ -25,7 +25,6 @@ along with this program. If not, see .
#define DEVICE_VER 0x0001
#define MANUFACTURER %YOUR_NAME%
#define PRODUCT %KEYBOARD%
-#define DESCRIPTION A custom keyboard
/* key matrix size */
#define MATRIX_ROWS 8
diff --git a/tmk_core/common/command.c b/tmk_core/common/command.c
index 3cfcba3058..ef6a39c0fe 100644
--- a/tmk_core/common/command.c
+++ b/tmk_core/common/command.c
@@ -141,7 +141,6 @@ static void command_common_help(void) {
static void print_version(void) {
// print version & information
print("\n\t- Version -\n");
- print("DESC: " STR(DESCRIPTION) "\n");
print("VID: " STR(VENDOR_ID) "(" STR(MANUFACTURER) ") "
"PID: " STR(PRODUCT_ID) "(" STR(PRODUCT) ") "
"VER: " STR(DEVICE_VER) "\n");
diff --git a/tmk_core/protocol/usb_hid/test/Makefile b/tmk_core/protocol/usb_hid/test/Makefile
deleted file mode 100644
index 83bf2aed67..0000000000
--- a/tmk_core/protocol/usb_hid/test/Makefile
+++ /dev/null
@@ -1,126 +0,0 @@
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device.
-# Please customize your programmer settings(PROGRAM_CMD)
-#
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-# (must have teensy_loader_cli installed).
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-# have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-# have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-# (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-# (must have Atmel FLIP installed).
-#
-# make debug = Start either simulavr or avarice as specified for debugging,
-# with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-# bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-# Target file name (without extension).
-TARGET = usb_hid_test
-
-TMK_DIR = ../../..
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# MCU name
-MCU = atmega32u4
-
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-# Interrupt driven control endpoint task
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-
-# Build Options
-# comment out to disable the options.
-#
-# Console for debug
-OPT_DEFS += -DCONSOLE_ENABLE
-
-# Boot Section Size in bytes
-# Teensy halfKay 512
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-#OPT_DEFS += -DBOOT_SIZE=4096
-
-
-
-SRC = test.cpp
-SRC += common/debug.c
-SRC += common/print.c
-
-CONFIG_H = config.h
-
-
-
-# Search Path
-VPATH += $(TARGET_DIR)
-VPATH += $(TMK_DIR)
-VPATH += $(TMK_DIR)/common
-
-
-
-# program Leonardo
-PROGRAM_CMD = avrdude -p$(MCU) -cavr109 -P$(DEV) -b57600 -Uflash:w:$(TARGET).hex
-
-
-
-include $(TMK_DIR)/protocol/usb_hid.mk
-include $(TMK_DIR)/protocol/lufa.mk
-include $(TMK_DIR)/rules.mk
diff --git a/tmk_core/protocol/usb_hid/test/config.h b/tmk_core/protocol/usb_hid/test/config.h
deleted file mode 100644
index 71a6814fd1..0000000000
--- a/tmk_core/protocol/usb_hid/test/config.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
-Copyright 2012 Jun Wako
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see .
-*/
-
-#pragma once
-
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0xCAFE
-#define DEVICE_VER 0x0814
-#define MANUFACTURER t.m.k.
-#define PRODUCT USB to USB keyboard converter
-
-#define DESCRIPTION Product from t.m.k. keyboard firmware project
-
-/* matrix size */
-#define MATRIX_ROWS 32
-#define MATRIX_COLS 8
diff --git a/tmk_core/protocol/usb_hid/test/test.cpp b/tmk_core/protocol/usb_hid/test/test.cpp
deleted file mode 100644
index 4958f0c619..0000000000
--- a/tmk_core/protocol/usb_hid/test/test.cpp
+++ /dev/null
@@ -1,92 +0,0 @@
-#include
-#include
-#include
-#include
-#include
-
-// USB HID host
-#include "Usb.h"
-#include "hid.h"
-#include "hidboot.h"
-#include "parser.h"
-
-// LUFA
-#include "lufa.h"
-
-#include "debug.h"
-
-#include "leonardo_led.h"
-
-
-static USB usb_host;
-static HIDBoot kbd(&usb_host);
-static KBDReportParser kbd_parser;
-
-static void LUFA_setup(void)
-{
- /* Disable watchdog if enabled by bootloader/fuses */
- MCUSR &= ~(1 << WDRF);
- wdt_disable();
-
- /* Disable clock division */
- clock_prescale_set(clock_div_1);
-
- // Leonardo needs. Without this USB device is not recognized.
- USB_Disable();
-
- USB_Init();
-
- // for Console_Task
- USB_Device_EnableSOFEvents();
-}
-
-static void HID_setup()
-{
- // Arduino Timer startup: wiring.c
- init();
-
- if (usb_host.Init() == -1) {
- debug("HID init: failed\n");
- LED_TX_OFF;
- }
-
- _delay_ms(200);
-
- kbd.SetReportParser(0, (HIDReportParser*)&kbd_parser);
-}
-
-int main(void)
-{
- // LED for debug
- LED_TX_INIT;
- LED_TX_ON;
-
- print_enable = true;
- debug_enable = true;
- debug_matrix = true;
- debug_keyboard = true;
- debug_mouse = true;
-
- LUFA_setup();
- sei();
-
- // wait for startup of sendchar routine
- while (USB_DeviceState != DEVICE_STATE_Configured) ;
- if (debug_enable) {
- _delay_ms(1000);
- }
-
- HID_setup();
-
- debug("init: done\n");
- for (;;) {
- usb_host.Task();
-
-#if !defined(INTERRUPT_CONTROL_ENDPOINT)
- // LUFA Task for control request
- USB_USBTask();
-#endif
- }
-
- return 0;
-}
diff --git a/tmk_core/readme.md b/tmk_core/readme.md
index 71b8d2e9fc..5b719bca5d 100644
--- a/tmk_core/readme.md
+++ b/tmk_core/readme.md
@@ -67,7 +67,6 @@ Start Your Own Project
#define PRODUCT_ID 0xBEEF
#define MANUFACTURER t.m.k.
#define PRODUCT Macway mod
- #define DESCRIPTION t.m.k. keyboard firmware for Macway mod
#### 2. Keyboard matrix configuration
#define MATRIX_ROWS 8